Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.0 LAccepted-AOC 05 AYODHYA NAGAR NEAR RAM MANDIR BEHIND HARIYA COLLEGE GOKUL NAGAR JAMNAGAR 361004 | JAMNAGAR | JAMNAGAR | GUJARAT | 361004 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹42.1 L+₹1.1 L (2.71%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹42.2 L+₹1.2 L (2.96%)Rejected-Finance | L3 | Rejected-Finance L3 | |
| 4 | L4₹43.8 L+₹2.8 L (6.81%)Rejected-Finance | L4 | Rejected-Finance L4 |
Tender Value
₹39 L
EMD Value
₹78,000
Closing Date
12 Oct 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Jamnagar No1
GE (AF) Jamnagar No1 Jamnagar 361003
SPL REPAIRS TO LOGISTIC AND ADDN/ALTN TO TECH BUILDINGS AT AF STN SAMANA UNDER GE (AF) JAMNAGAR NO 1
2024_MES_673158_1
8309/E8
Open Tender
Miscellaneous Works
Item Rate
270 days
Samana under Jamnagar
6 documents required · 6 mandatory
₹500
₹78,000
Yes
26 Oct 2024
9 Sept 2024
14 Oct 2024
9 Sept 2024
12 Oct 2024
23 Sept 2024
Amount
M&L for complete removal of existing treatment of any thickness laid over RCC roof / chajja, cleaning and washing of roof / chhajja with water to remove dust etc as preparation to receive treatment, brooming down or steel wire brushing, scraping down smoke soot, mouls, moss and efflorescent salts and treating oil and greasy spots complete all as specified and directed
M&L for brushing neat cement slurry with 3.0kg of cement per square metre complete all as specified and directed.
M&L for cement concrete in roof pading, coving,filling and mass concrete type B-0, 1:2;4 (using 12.5mm graded stone aggregate) complete all as specified and directed
M&L for screed bed 10mm thick on concrete surface in CM 1:4, finishing the surface even and smooth without using extra cement, including mixing only liquid water proofing compound as per manufacture instruction complete all as specified and directed Note WPC will be measured & paid separately.
Supply only liquid integral water proofing chemical complete all as specified and directed. Make : Fosroc, Dr Fixit or equivalent as specified
M&L for water proofing treatment to RCC roof slab all as specified below and as directed:- (a) Apply one coat of glass fibre base bitumen felt primer, grade 2 @ 0.25 Kg/Sqm. (b) Laying APP based ploymeric membrane 3mm thick, minimum wt 3.00 kg/Sqm reinforced with polyester non-woven fabric (weighing not less than 150gms/Sqm ) laid on primed roofs & flashing by forced application having side overlap 100mm and at the end 150mm using Butane torch, and sealing all joints and overlaps
Dismantling wall and ceiling board (fibre, pulp, insulation, etc.) or insulation boards/block boards/decorative laminate/beads/timber etc any thickness,any description including cover fillets etc.
S&F 600x600mmx4mm thick false ceiling of non asbetos fibre cement building boards (E Board) and including anodised aluminium pwered coated (minimum thijness of piowder coating 50 micron) snap grid fram work of T section (main & cross member) of size 25mm x 25mm x 1.5mm thick in squre pattern of grid size 605 x 605mm. The aluminum work will be suppoted on side wall with the use of aluminium 'L' section of size 25mm x25mm x1.5mm angles etc. Snap grid shall be supported with hangers of 4mm dia galvanised iron wire adjusting level fixed to roof slab/truss etc by means of ceiling cleats made out of galvanised iron flat of size 40x3mm size 60mm long and expansion hold fastners 12.5 mm dia 40mm long complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for.
S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spiked, framed guard bars, iron doors, ladders, framed blasters, walkways, railings, framework of water tanks and similar work conforming to Fe 290 Grade E-165
M&L for preparation of new steel surfaces over 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide.
M&L for preparation of old painted steel surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint
M&L for preparation of new wooden surfaces, exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer all as specified and as directed by Engineer-In-Charge.
M&L for preparation of old painted wooden surfaces, exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed by Engineer-In-Charge.
S & F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer's specifications and as directed by Engineer-in-Charge
S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m each
Taking down shutter of any description exc 1.00 sqm and n exc 2.00 sqm each and removal from site complete all as specified and directed by Engineer-in-Charge
S&F for powder coated Anodised aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
S&F for powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ handles/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. Weight of aluminium sections, fittings & fixtures shall only be measured and paid for under this item. Cost of gasket, etc., is deemed to be included in the quoted rates and shall not be measured and paid for separately.
S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge
S&F in repair aluminium three track Powder coated of any color ( thickness of powder coating not less than 50 micron) sliding window with three sliding shutter , the size of outer frame three track 92 x 31.5x 1.20mm ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm)and glazing with 4 mm thick glass ( plain/floated) including all-around suitable rubber gasket and MS wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers’s sliding rollers of nylon with including all necessary fittings complete all as specified and directed by Engineer-in-Charge
S&F aluminium window and ventilator shutters, powder coating of any color ( thickness of powder coating not less than 50 micron) side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) in repair complete all as specified
S&F sheet glass 3 mm thick ordinary quality(sheet glass is ground or obscured or frosted, on one side) and fixed in Aluminium window/ventilator in square n.exc. 0.5 sqm in each pane complete all as specified & directed.
S&F sheet glass 4mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane
S&F sheet glass 4 mm thick ordinary quality) and fixed in Aluminium window in square exc. 0.5 sqm in each pane complete all as specified & directed.
M&L for 12mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & fixed with aluminium frame work
S&F for Door closer die cast hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed
S&F for brass 4 lever mortice lock, vertical type, size 100 mm brass 4 lever complete all as specified& directed
S&F for 200mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified.
S&F for over all length of cover length 140mm, floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor
S&F 2nd class HW 35mm thick Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed Engineer-in-Charge
S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified & directed.
S&F in repair 125 mm in size aluminium handles cast type anodized complete all as specified & directed.
S & F in repair 250 mm mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified and directed by Engineer-in-Charge
S&F in repair 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified & directed.
S&F 100mm long Aluminium handles, cast type, anodised, complete all as specified and as directed.
S&F in repair 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified & directed.
S&F 100mm long Aluminium anodised, barrel tower bolts of extruded section and fixed
S&F for Aluminium alloy, anodised,150mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed
S&F in repair Curtain rod, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified & directed.
Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, all as specified and as directed.
M&L for rendering 15 mm thick in cement mortar 1:4 on stone masonary /brick/ concrete surfaces of wall and surface finished even and smooth .complete all as specified and directed Note:- Quoted rate deemed to carryout wk at height upto 5.00 m
S &F for fibre glass mesh of 145 gsm for plastering wk etc complete all as spd all directed
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/ old surfaces walls/fins/facia/soffit etc complete all as specified and directed Note:- Quoted rate deemed to carryout wk at height upto 5.00 m
M&L for rendering 15 mm thick in cement mortar 1:6 on fa stone masonary /brick/ concrete surfaces of wall and surface finished even and smooth without using extra cement.complete all as specified and directed
M&L for preparation of newly plastered wall surface and applying 2mm thick wall care putty for making smooth surface and applying two coat distemper oil emulsion over a coat of alkali resistant primer complete all as specified.
M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of concrete surfaces in ceiling, facia roof projection etc and surface finished even and smooth.complete all as specified and directed Note:- Quoted rate deemed to carryout wk at height upto 5.00 m
M&L for preparation of newly plastered ceiling surface and applying 2mm thick wall care putty for making smooth surface and applying two coat distemper oil emulsion primer complete all as specified.
M&L for preparation of old distempered/ decorated surfaces of walls washing, rubbing down and stopping of distempered and painted surface and applying two coat distemper oil emulsion over smooth surface of wall complete all as specified.
M&L for preparation of old distempered/ decorated surfaces of ceiling washing, rubbing down and stopping of distempered and painted surface and applying two coat distemper oil emulsion over smooth surface of wall by applying 2mm thick wall care putty complete all as specified.
Dismantling of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debries to a distance exc 1.5 km but n.exc 2 Km complete all as spd and directed.
M&L Rendering 10mm thick in CM 1:4 on on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing for skirting/dado etc complete all as spd and directed
M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as spd and directed
M&L for coloured glazed ceramic white tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as spd and directed
M&L for Non skid, coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc laid over and pointed with coloured cement to match the tiles complete all as spd and directed
M&L for virified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all specified and as directed.
M&L Green Marble work 15 to 18 mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as spd and directed
M&L 18 -20mm thick granite stone slab of any type (cut, table rubbed and polished)in steps, jambs, pillars, window cills, cooking platforms and like , bedded & jointed with grey cement slurry & pointing with coloured cement using marble dust with admixture of pigment to match with marble shade; laid over complete.
S&F in repairs sinks with drainage board made of stainless steel lmm thick, kitchen or laboratory, with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete as specified and directed.
Dismantling water tanks exc 250 ltr and n.exc 500 ltr and removing to store complete all as spd and directed
S&F 500 ltrs capacity double layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position over existing PCC platform incl all fitting such as connection pieces with GI tank nipple for inlet, outlet, etc complete all as specified and directed
Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal from site complete all as spd and directed
Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal from site complete all as spd and directed
Cutting chases, pinning in, making good to facings on stone concrete, block or slab wall, where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as spd and directed
S&F 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed
S&F 32mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed
S&F in repair 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed
S&F CPVC ball valves for 32mm outer dia pipe complete all as specified and directed by Engineer-in-Charge
Demolition of cement concrete ( unreinforced) in ground floor and pavings not exc 15cm thickness below or above ground level, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km.
M&L for 75 mm thick plain cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in plinth protection, flooring, etc including finished even and smooth without using extra cement and all as directed by Engr-in-charge.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out hard/ dense soil complete all as specified and directed.
Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge.
M&L for 100 mm thick plain cement concrete 1:4:8 type B2, using 40 mm graded stone aggregate, as in sub base to floors and paving etc all complete all as directed.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.
M&L for Rubber moulded chequered cement concrete tile with white cement and pigment (of approved tint) of size 30 cm x 30 cm x 25 mm thick , set, jointed and pointed in neat cement slurry complete.
Demolition of Reinforced cement concrete of any descrition such as chajja, shelves, OHT Tanks,Pilar,wall, column.beam etc and in any position not other wise specially provided for complete all as specified and directed by Engineer in Charge (reinforcement cut as required to facilitate demolition)
M&L for Reinforcemed cement concrete (nominal mix) type B1 1:2:4 using 20mm aggregate as in slab supported on walls beams and columns in floor, roof, landing and in shelves, chajja, lintel and similar wks complete all as specified and directed by Engineer-in-Charge
S&F mild steel TMT bar 10mm dia and over cut to length bent to shape required including cranking bending spirally and binding with and including mild steel wise (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-Charge
S&F mild steel TMT bar 6mm to 8mm dia and over cut to length bent to shape required including cranking bending spirally and binding with and including mild steel wise (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-Charge
Form work to sofits of suspended slab such as roof slab, floor slab , landing, chajjas, lintel and similar work for rough finish surface, complete all as specified and directed by Engineer-in-Charge
S&F in repair vitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling and including waste fitting and union complete all as specified and directed by Engineer-in-Charge
S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; complete all as spd and directed
S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimumweight 60gms) incl. all accessories / fittings etc complete all as specified and directed by Engineer-in-Charge
S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed by Engineer-in-Charge
S&F in repair vitreous china wash down water closet pan (pedestal pattern) white with CI 'P' or 'S' trap incl water closet seat cover of plastic,jet etc.complete incl necessary PVC waste pipe fitting, complete all as specified and directed by Engineer-in-Charge
S&F health faucet with 1 meter long easy flex tube in chrome finish & wall hook, complete all as specified
S&F in repair 10 Litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and PVC flush pipe, fixed in position and connecting complete all as spd and directed
M&L for 32mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed
S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed
S & F in repair Low density polyethylene pipes (LDPE) 32mm of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc
S&F PVC waste pipe flexible type suitable for couplings 32 / 40 mm dia and 750 mm long complete all as specified and directed..
S&F for 32mm waste coupling of PTMT (half or full threaded) (Minimum weight 32mm 45gms/40mm-60 gms) but suitable for urinals, complete all as specified and as directed.
S&F 15mm size angular Stop valves but fancy type, chromium plated , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as spd and directed
S&F in repairs two way angle valve brass chromium plated, fancy type complete all as specified and as directed.
S&F 15mm dia size chromium plated fancy Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as spd and directed
S&F 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated fancy type , screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as spd and directed
S & F in repair Tubular towel rail, 20mm dia, D type, 600mm long between flanges chromium plated complete all as spd and directed
S&F in repair chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge
Dismantling and disconnecting of existing cast iron or reinforced concrete drain pipes, jointed in cement mortar 75/100 mm dia bore fixed to wall,laid in trenches complete all as specified and directed Engineer-in-Charge
S&F PVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed
S & F 75 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes provided with access door in repair complete all as specified and directed by Engineer-in-Charge
M&L for 75 mm dia of PVC (SWR) floor trap plain with grating incluing jointing with solvent cement in repair complete all as specified and directed by Engineer-in-Charge
S&F in repair PVC (SWR) 75mm multi floor trap with grating including jointing with solvent cement, complete all as specified and as directed.
S&F PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed on walls including clamp complete all as specified and directed
S&F PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed
S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes in repair complete all as specified and directed by Engineer-in-Charge
S & F 110 mm bore of pipe PVC (SWR) junction single,(Single T) equal or unequal fixed to PVC pipes with access door in repair complete all as specified and directed by Engineer-in-Charge
S & F 110 mm bore of pipe PVC vent cowl fixed to PVC pipes in repair complete all as specified and directed by Engineer-in-Charge
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.
M&L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete, all as specified and directed.
S&F for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed by Engr-in-Charge.
S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and as directed.
Taking down carefully any aluminum /copper point wiring (light,fan,socket or power) complete including conduits/casing caping including fixture and fittings such as switches,ceiling rose pendants,regulator sockets light fittings etc removing material/debris for taking credit and making good the disturbed surface of walls & floors etc to match with the original existing finish complete all as specified and as directed.
Taking down carefully any aluminum /copper point wiring (light,fan,socket or power) complete including conduits/casing caping and removing material/debris for taking credit and making good the disturbed surface of walls & floors etc to match with the original existing finish complete all as specified and as directed.
Taking down sub main wiring of three core PVC cable PVC insulated 2.5 Sqmm / 4 Sqmm / 6 sqmm / 10 Sqmm including casing & caping or wooden batten and remove from the site of work and making good the disturbed surfaces of wall or floor etc. as directed and specified by Engineer-in-Charge.
Material & Labour for point wiring with 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable 1100 volts grade ISI marked drawn and including PVC casing caping, including all accessories like bend, tees, junction boxes etc. including 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable as a earth wire connected to common earth dolly, etc excluding sheet metal flush box suitable for modular switches complete for following:
One Light point /Fan point controlled by one switch
One 3 pin socket out let 5 Amps on the same board.
One 3 pin socket out let 5 Amps on the independent board.
All as per item No.120 about but with 4.0 sqmm multistranded copper multistranded conductor FRLS cable with4 sqmm earth wire for one 6 pin socket outlet 15 Amps on independent board.
All as per item No 120 above but One bell /Buzzer point controlled by one push button independent
S & F switcht 6 Amps , flush button type, SP, one way, 230 Volts, AC
S & F in repairs switcht 6 Amps , flush button type, SP, one way, 230 Volts, AC
S & F switch socket comb 6 Amps , flush button type, SP, one way, 230 Volts, AC
S & F in repairs switch socket comb 6 Amps , flush button type, SP, one way, 230 Volts, AC
S & F switch socket comb 16 Amps , flush type, multipurpose, 230 / 250 volts , AC with ISI marked
S&F in repairs ceiling rose polycarbonate body 6 Amps, 250 volts AC three Terminals complete all as specified.
Supply and fix in repair sheet metal enclosure MCB DB, triple pole and neutral,8 ways double door 415 volts having 200 Amps double door rated bus bar with blanking plates wherever required and degree of protection I.P 43 -IK 09 with acrylic cover as including all connectionsas directed by engineer in charge
Supply and fix in repair sheet metal enclosure MCB DB, single pole and neutral, 12 ways double door 240 volts having 200 Amps rated bus bar with balnking plates wherever required and degree of protection I.P 43 -IK 09 with acrylic cover as including all connectionsas directed by engineer in charge
Supply and fix in repair MCB single pole 240 volts 6 to 32 Amps (to be fixed as per load requirement) 220V with 'C' curve complete as including all connectionsas directed by engineer in charge
Supply and fix in repair MCB Single pole Neutral 240 volts 40- 63 Amps (to be fixed as per load requirement) 220V with 'C' curve complete as including all connectionsas directed by engineer in charge
Supply and fix in repair MCB’s triple pole & neutral, 63 Amps, 415 volts with ‘C’ curve, fixed in sheet metal board complete including connecting items as directed by engineer in charge
Supply & Fix energy efficient LED tube light fitting with built in LED & integral LED driver 20 watt, channel housing & diffuser of length 1200 mm (approx) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge
Supply and fix industrial Exhaust Fan 230V Single Pole 450 mm 1400 RPM sweep with louvers metal body fixed as per manufacturer instruction connecting with and including 1.5 Sqmm copper conductor,PVC insulated and PVC seathed 3 core cable including making suitable size hole in brick/PCC block masonary wall built in CM and making good disturbed surface complete. Make: Havells or equivalent of make Bajaj/crompton/usha.
M&L for sub main wiring with four runs (3 Phase + 1 Neutral) of single core PVC casing caping fixed unsheathed 1100V grade multistranded copper conductor cable 10 Sqmm size inclusive fixed in wall incl two runs of 6 Sqmm PVC insulated unsheathed copper conductor cable as earth wire complete all as specified and as directed.
M & L for sub main wiring with two single core PVC insulated and unsheathed cable 6 sqmm with multi stranded copper conductor , FRLS type cable drawn through and including casing and caping complete with all accessories alongwith provn of 6 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire and connecting to tbe BD with proper size of lugs/thimbles etc comnplete all as specified and directed.
Material & Labour for sub main wiring with 2 run single core multistranded copper conductor cable, of size 4 Sqmm, PVC insulated, unsheathed, fire retardant low smoke, drawn through and including PVC casing caping not less then 25 mm wide with all necessary fitting and including one run single core multistranded copper conductor cable, of size 4 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling, complete all as specified and directed.
Material and labour in replacement for provision of earthing complete with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m deep below normal ground connected to galvanised earth lead 4mm dia by means of bolts, nuts, check nuts and washer of galvanized steel, watering pipe of 20 mm bore galvanised iron medium grade and 40 mm bore galvanised iron light grade for earth strip protection including.....
.....all excavation, earth work in any type of soil, PCC pit in PCC 1:2:4 type B-1 and RCC 1:2:4, type B1 for precast chamber cover 50 mm thick, reinforced with welded steel wire fabric or XPM Jali (weight not less than 4.00 Kg / sqm), with charcoal, salt, funnel complete all as shown in the electrical plate No 3 of SSR part –I and testing on completion. Note : (i)Earth result after installation completely should be less than 5 Ohm . (ii)Quoted rates shall be deemed to include for earth lead wire of 4.00mm dia with protection pipe of 7.5 M length.
Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of rating 20 amps.
Supply and fix in repair Energy Efficient recessed mounted 36 watt LED luminarie 600mm x 600mm false celing light complete including connection. Make Phillips complete or equivalent in Wipro/Crompton
Taking down carefully by unscrewing from fitting and fixtures as switches,ceiling roses, pendents,regulators,bells, sockets, tube light fittings,DB,MCB etc, for reuse at site or carrying to the store( To be found measured only when found serviceable ) and refixing the same in all respect for reuse all as specified and as directed
S & F electronic fan stepped regulator flush type 6 Amps , flush type 2 in 1, 230 / 250 volts , AC with ISI marked
M & L ceiling rose polycarbonate body 6 Amps, 230/250 volts AC three Terminals complete all as specified.
S&F Bell ding dong, AC, 230 volts, single pole including connecting complete.
S&F Bell push 5 Amp, AC, 230 volts, single pole including connecting complete.
Supply and fix in repair sheet metal enclosure MCB DB, triple pole and neutral,4 ways double door 415 volts having 200 Amps double door rated bus bar with blanking plates wherever required and degree of protection I.P 43 -IK 09 with acrylic cover as including all connectionsas directed by engineer in charge
Supply and fix in repair sheet metal enclosure MCB DB, triple pole and neutral,6 ways double door 415 volts having 200 Amps double door rated bus bar with blanking plates wherever required and degree of protection I.P 43 -IK 09 with acrylic cover as including all connectionsas directed by engineer in charge
Supply & Fix energy efficient LED tube light fitting with built in LED & integral LED drive 10 watt, channel housing & diffuser of length 800 mm (approx) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge.
Supply and fix plastic body Exhaust Fan 230V Single Pole 250 mm 1400 RPM sweep with louvers plasticl body fixed as per manufacturer instruction connecting with and including 1.5 Sqmm copper conductor,PVC insulated and PVC seathed 3 core cable including making suitable size hole in brick/PCC block masonary wall built in CM and making good disturbed surface complete. Make: Havells or equivalent of make Bajaj/crompton/usha.
S&F in repair LED building security light fitting 35 Watt, system efficiency not less than 100 lumen / Watt, IP66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment , Heat resistance toughened glass fitted in cast aluminium housing with SS screws, pipe, bracket on building,
M & L for sub main wiring with two single core PVC insulated and unsheathed cable 2.50 sqmm with multi stranded copper conductor , FRLS type cable drawn through and including PVC conduit 25 mm complete with all accessories along with provn of 2.50 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire and connecting to tbe BD with proper size of lugs/thimbles etc comnplete all as specified and directed.
M&L for taking out Disconnecting ,re-routing and re-fixing of existing LTcable any size on wall or floors with suitable clamps and reconnecting and testing complete as directed by engineer in charge
Supply and fix in repair Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of rating 20 amps.
Taking down Ceilling fan/exhaust fan with cover plate , sealing cable end, dismantling blades and removing fan and blad for painting of ceiling fan/Exhaust fan complete with synthetic enamel paint black/ white by spraying including filling of cavities with filler, one coat after cleaning all rust and dust etc complete and refixing the same with 0.5 sqmm , flexible ,three core wire, copper conductor cable all as directed by Engineer-In-Charge. all as specified and directed.
Supply, Installation & testing of 02 TR capacity 3 star BEE rating split type AC Unit with Inverter base Technology complete with indoor & outdoor unit, with copper tubing, electric driven 240 volt, single phase, charged with Eco Friendly non CFC Refrigerant with Antibacterial / Dust Filter and all connected accessories and copper tubing from indoor to outdoor unit with rubber insulation, MS stand / bracket of suitable size to withstand and for fixing outdoor unit on wall, copper wiring of 4 Sqmm PVC insulated 3 core from indoor to outdoor unit, PVC drain pipe from indoor unit to outside of wall up to plinth protection of building complete as per manufacture instruction & as directed .
Supply & fix Voltage stabilizer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 170V to 270V with out put voltage stabilized at 230V with accuracy of ±2.5% and of capacity 5 KVA, including connection complete.
Sagathiya Builders (BID ID -3130893)
Prashiv Enterprise (BID ID -3137356)
Jagdamba Engineering (BID ID -3137549)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .