RECARPETING OF ROAD IN FRONT OF OFFR MESS AND PROVN OF ROAD FURNITURE AT ICGS OKHA UNDER GE I CG PORBANDAR

Amount

SCHEDULE 'A'

M&L preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the clean surface with air compressor to remove all loose dirt etc. complete all as specified and directed by Engr-In-Charge

M&L Applying Paving Bitumen evenly a priming/tack coats with paving bitumen primer @ 5 Kg per 10 sqm complete all as specified and directed by Engineer-in-Charge

Repair to pot holes any depth, n.exc 1 Sqm each incl sweeping free from dust and mud or water, scoring sunkened surfaces in roads, paths etc, cutting around edges to at least 25 mm in depth, making good by applying tack coat of bitumenous primer @ 5 Kg/10 sqm of binder and well rammed (incl supply of premix binder and chipping) complete all as specified and directed by Engr-In-Charge.

Supplying, laying spreading upto 75mm thick consolidated thickness of premix bitumeinous macadam carpet using design mix formula, single layers with using mechanical paver using bitumineous binder @ 4% by weight of total mix, rolled and rolled and consolidated to required camber and gradient with 8 to 10 tonne power roller to a unifirm smooth surface etc complete all as specified.

Supplying, laying, spreading 40mm consolidated thickness of semi dense asphaltic bituminous concrete premixed carpet with design mix formula with Paving bitumen not less than 5.5% using Sensor paver, rolled and consolidated to required camber and gradient with 8 to 12 tonne power roller to a uniform smooth surface etc complete all as specified..

M&L painting lines, dashes, arrowes, letters, marking erc of 2 mm thick on new surface or previoulsy treated road roads surface with hot applied retro reflective thermoplastic road making paint (white/golden yellow) conformig to MORT&H (Clause 803.4) all as specified with 8% glass beads using special applicator machine with heating arrangement upto 160 degree C including cleaning and drying the existing road surfaces to ensure dust, oil grease and moisture free surfaces before applying paint complete all as spcified and as directed.

S& F Reflecting road studs /cat eye (two way) size 100X100X25 mm through polycorbonate lens shield body component light weight ribbed structure on bedded in road surface using cut back bitumen emulsion complete all as specified and as directed by Engineer-in-Charge. (Make: Sinor infrastructure(DA-51) or equivalent in 3M/Dark Eye)

S&F Solar stud 125X125X25 mm (Model DA 110-DHRUV) aluminium alloy and construction solar powered by nionocrystal solar panel type of batery; one high capacity NI-CD rechargeble batery view distance Approximate 1000 mtrs LEDs- 010mm 3 pieces each side and total 6 pieces are used for high brightness of diffrenet colour back up 12 houres of continous lighting at night corner .red corner super quality duly fixed with Epoxy Make-Greenlite/Dark Eye/3M.

S&F Solar Delinator of 50 mm dia and 900 mm in height made of 16 gauge MS Pipe Powder coated having three deflective bands of different colour as required as white /red/green/yellow etc as approved by GE embedded in PCC 1;2;4 type B-1 using 20 mm graded stone aggregate size of block 30cmX30Xcm30cm complete all as specified and directed by Make -3 M/TATA BP Solar/SA Traffic Safety Kolkata /Bonus light PVT LTD Ahemdabad ASIN Control Mumbai

S& F ABS Plastic speed breaker size 750mmX75mmX250mm made of ABS material with Two high reflactive reflectors moulded in PMMA material are welded with ABS plate through ultrasonic welding process complete all as specified (Make ;sinor infrastructure(Model DA-1006) or equivalent in 3M/as approved by GE

S&F Road Traffic convex mirror 1000 mm dia made from long life poly carbonate with strong impact resistant and shutter proof with a sun shield or protective hood of colour as approved by GE and 75mm dia MS pipe of suitable length as directed including fixing in cement concrete (1:2;4) type B-1 using 20mm graded stone aggregate with size of block 450 x450 x 600 mm deep including necessary earthworkj and excavation complete.

M&L For Cleaning the surface by brushing with wire brushes for removing caked mud etc sweeping with compressor air blower to remove all loose dust and dirt etc/taking out dust existing material with compressed air and making the surface free from dust drying the surface and applying the Two coat of polymeric modified bitumen emulsion (PMBE) by using self propelled emulsion distribution uniformaly or toward emulsion pressure sprayer equipped for spraying the PMBE uniformaly and mopping the total undiluted PMBE @ 0.60 litre per sqm in one coat (diluted quantity 1.20 litre /sqm) dully diluted in ratio 3:2(PMBE 3 Litre : water 2 Litre) and ensure uniform finish of total area complete all as per manufracture instruction complete all as specified and directed Note-1 Actual quantity of PMBE for two coats shall be as per trial patch and approved by Eng-in-Charge and shall not be more than 1 litre (undilute PMBE) per sqm consumption of PMBE shall be jointly recorded in MB for record purpose Note-2 minus price adjustment as per pro rata of coated rate for 1 ltr(undilute PMBE) per sqm in onr coat shall be made if less quantity of PMBE as per trial patch and subsequently approved by Eng-In-Charge is used in work Note 3 Special care shall be taken to fill gape /crack with 6 mm to 2.36 mm size coarse sand as per manufracture instruction and quoted rates is included for repair of gapes/cracks Note-4 quoted rate shall be deemed to included for trial patch 15 mtrX15 mtr

M&L For Cleaning the surface by brushing with wire brushes for removing caked mud etc sweeping with compressor air blower to remove all loose dust and dirt etc/taking out dust existing material with compressed air and making the surface free from dust drying the surface and applying the Two coat of polymeric modified bitumen emulsion (PMBE) by using self propelled emulsion distribution uniformaly or toward emulsion pressure sprayer equipped for spraying the PMBE uniformaly and mopping the total undiluted PMBE @ 0.60 litre per sqm in one coat (diluted quantity 1.20 litre /sqm) dully diluted in ratio 3:2(PMBE 3Litre : water 2 Litre) and ensure uniform finish of total area complete all as per manufracture instruction complete all as specified and directed Note-1 Actual quantity of PMBE for two coats shall be as per trial patch and approved by Eng-in-Charge and shall not be more than 1 litre (undilute PMBE) per sqm consumption of PMBE shall be jointly recorded in MB for record purpose Note-2 minus price adjustment as per pro rata of coated rate for 1 ltr(undilute PMBE) per sqm in onr coat shall be made if less quantity of PMBE as per trial patch and subsequently approved by Eng-In-Charge is used in work Note 3 Special care shall be taken to fill gape /crack with 6 mm to 2.36 mm size coarse sand as per manufracture instruction and quoted rates is included for repair of gapes/cracks Note-4 quoted rate shall be deemed to included for trial patch 15 mtrX15 mtr

SURAJ ENTERPRISE

Harsh Infrastructure