Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.0 LAccepted-AOC 2 B KRISHNA NAGAR AMBALA CANTT | AMBALA | HARYANA | 133001 | L1 | Accepted-AOC Accepted being Lowest and reasonable one. | |
| 2 | L2₹35.4 L+₹3.1 L (9.54%)Rejected-Finance | L2 | Rejected-Finance Rejected being L2 | |
| 3 | L3₹37.5 L+₹5.2 L (16.0%)Rejected-Finance | L3 | Rejected-Finance Rejected being L3 | |
| 4 | L4₹37.5 L+₹5.2 L (16.1%)Rejected-Finance | L4 | Rejected-Finance Rejected being L4 | |
| 5 | L5₹41.3 L+₹9.0 L (27.9%)Rejected-Finance 33 A DURGA NAGAR AMBALA CANTT 133001 | AMBALA | HARYANA | 133001 | L5 | Rejected-Finance Rejected being L5 |
| Sl No | Description | Qty | Unit | AMIT LAMBA L4 | shiv const co L5 | Ashwani Kumar L6 | Swami Enterprises L3 | Puneet Sharma L1 | Parveen Kumar L2 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of cement concrete in floors and pavings not exceeding 15 cm thickness below or above ground level including disposal of unservieable rubbish outside cantt area, complete all as specified and directed. | 195 | CUBIC METER | 90 ₹17,550 | 50 ₹9,750 Lowest | 145 ₹28,275 | 60 ₹11,700 | 50 ₹9,750 Lowest | 52 ₹10,140 |
| 2.00 | Material and labour for 100mm thick plain cement concrete 1:4:8 type D2 using 40 mm graded mechanically crushed stone aggregate as in foundation filling or mass concrete complete all as specified and as directed. | 200 | SQUARE METER | 150 ₹30,000 | 200 ₹40,000 | 145 ₹29,000 | 121 ₹24,200 Lowest | 150 ₹30,000 | 160 ₹32,000 |
| 3.00 | Material and labour for 50 mm thick plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floors/hardstanding laid in panels and finishing the surface even and smooth without using extra cement, complete all as specified and directed. | 500 | SQUARE METER | 100 ₹50,000 | 130 ₹65,000 | 325 ₹1,62,500 | 250 ₹1,25,000 | 60 ₹30,000 Lowest | 205 ₹1,02,500 |
| 4.00 | Material and labour for glass dividing strips, 1.5 mm thick and 38mm width of strip and inserted in position, conform to design complete all as specified and directed. | 200 | RUNNING METER | 30 ₹6,000 | 40 ₹8,000 | 20 ₹4,000 | 16 ₹3,200 | 25 ₹5,000 | 10.6 ₹2,120 Lowest |
| 5.00 | Material and labour for 75 mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed. | 2,000 | SQUARE METER | 100 ₹2,00,000 Lowest | 200 ₹4,00,000 | 135 ₹2,70,000 | 121 ₹2,42,000 | 100 ₹2,00,000 Lowest | 106 ₹2,12,000 |
| 6.00 | Material and labour for heavy duty tiles (coloured), good grip series, size 300 mm x 300 mm x 10 mm thick, pattern as approved by Engineer-in-Charge, set, jointed and pointed in neat cement slurry @ 3.00 kg/square metre, laid over and including 20 mm thick (average thickness) cement mortor (1:4) bed, including dismantling of floor or wall tiling including cement mortar bedding and removing the rubbish outside the defence land complete all as specified and directed. | 1,200 | SQUARE METER | 579 ₹6,94,800 | 530 ₹6,36,000 | 525 ₹6,30,000 | 542 ₹6,50,400 | 450 ₹5,40,000 Lowest | 527 ₹6,32,400 |
| 7.00 | Material and labour for factory made PVC moulded, dark red/yellow coloured , glossy finished, vibrated machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed by Engineer-in-charge. | 800 | SQUARE METER | 600 ₹4,80,000 | 530 ₹4,24,000 | 550 ₹4,40,000 | 601 ₹4,80,800 | 400 ₹3,20,000 Lowest | 507 ₹4,05,600 |
| 8.00 | Material and labour for plain cement concrete 1:2:4 type B-1 (using 20 mm graded mechanically crushed stone aggregate) as in coping, roof kerbs or mud stops and the like, rounded or chamfered on edges complete all as specified and directed. | 4.5 | CUBIC METER | 2,500 ₹11,250 Lowest | 4,500 ₹20,250 | 4,800 ₹21,600 | 6,000 ₹27,000 | 4,000 ₹18,000 | 3,700 ₹16,650 |
| 9.00 | Material and labour for routine maintenance of rolling shutter area of shutter not exceeding 10.00 Sqm each(Max height. 3.50 M) :-
(a) Taking down hood covers for carrying out routine maintenance and refixing the same.
(b) Dismantling the MS and CI works of any description such as sheets, shafts, cost iron wheels, lath etc and taking down helical springs, rollers and other accessories etc.
(c) Refixing the serviceable accessories such as shafts, helical springs, rollers lath sheets, cast iron wheels etc.
(d) Cleaning, oiling, greasing etc complete of all movable parts all as required at site.
(e) Gear box and helical spring shall be measured and paid separately. | 20 | EACH | 1,000 ₹20,000 | 1,000 ₹20,000 | 1,980 ₹39,600 | 800 ₹16,000 | 500 ₹10,000 Lowest | 700 ₹14,000 |
| 10.00 | Supply and fixing of 1.25mm thick steel rolling shutters, with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type including taking down old rolling shutter complete all as specified and directed. | 40 | SQUARE METER | 800 ₹32,000 | 2,500 ₹1,00,000 | 3,380 ₹1,35,200 | 2,300 ₹92,000 | 1,450 ₹58,000 | 770 ₹30,800 Lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
11 Jul 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SHRI ABHINANDAN KUMAR MISHRA, EE(SG), IDSE
GE (SOUTH) AMBALA CANTT
CERTAIN MISC REPAIRS OF MARRIED AND OTM ACCN OF B2 SECTOR MAHESH NAGAR AND ADJOINING AREA OF AGE B R II (SOUTH) AMBALA UNDER GE (SOUTH) AMBALA CANTT
2025_MES_714204_1
GE(SOUTH)/AMB-20/2025-2026
Open Tender
Civil Works
Item Rate
180 days
GE (SOUTH) AMBALA CANTT
AS PER NIT
9 documents required · 9 mandatory
₹500
GE (SOUTH) AMBALA CANTT
₹80,000
Yes
1 Sept 2025
13 Jun 2025
14 Jul 2025
13 Jun 2025
11 Jul 2025
28 Jun 2025
13 Jun 2025 - 27 Jun 2025
Amount
Demolition of cement concrete in floors and pavings not exceeding 15 cm thickness below or above ground level including disposal of unservieable rubbish outside cantt area, complete all as specified and directed.
Material and labour for 100mm thick plain cement concrete 1:4:8 type D2 using 40 mm graded mechanically crushed stone aggregate as in foundation filling or mass concrete complete all as specified and as directed.
Material and labour for 50 mm thick plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floors/hardstanding laid in panels and finishing the surface even and smooth without using extra cement, complete all as specified and directed.
Material and labour for glass dividing strips, 1.5 mm thick and 38mm width of strip and inserted in position, conform to design complete all as specified and directed.
Material and labour for 75 mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.
Material and labour for heavy duty tiles (coloured), good grip series, size 300 mm x 300 mm x 10 mm thick, pattern as approved by Engineer-in-Charge, set, jointed and pointed in neat cement slurry @ 3.00 kg/square metre, laid over and including 20 mm thick (average thickness) cement mortor (1:4) bed, including dismantling of floor or wall tiling including cement mortar bedding and removing the rubbish outside the defence land complete all as specified and directed.
Material and labour for factory made PVC moulded, dark red/yellow coloured , glossy finished, vibrated machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed by Engineer-in-charge.
Material and labour for plain cement concrete 1:2:4 type B-1 (using 20 mm graded mechanically crushed stone aggregate) as in coping, roof kerbs or mud stops and the like, rounded or chamfered on edges complete all as specified and directed.
Material and labour for routine maintenance of rolling shutter area of shutter not exceeding 10.00 Sqm each(Max height. 3.50 M) :- (a) Taking down hood covers for carrying out routine maintenance and refixing the same. (b) Dismantling the MS and CI works of any description such as sheets, shafts, cost iron wheels, lath etc and taking down helical springs, rollers and other accessories etc. (c) Refixing the serviceable accessories such as shafts, helical springs, rollers lath sheets, cast iron wheels etc. (d) Cleaning, oiling, greasing etc complete of all movable parts all as required at site. (e) Gear box and helical spring shall be measured and paid separately.
Supply and fixing of 1.25mm thick steel rolling shutters, with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type including taking down old rolling shutter complete all as specified and directed.
Dismantling for disturbed or detorated fencing barbed wire from swan neck angle post of any type over existing fencing complete all as specified and directed.
Supply and fixing of Razor Tape Concertina Coil not less than 2.5mm thick of 600mm dia meter with uniform sapcing 8-9 inches tied with using binding wire between the embeded angle post all as specified and directed
Material and labour for removing blockage from WC's traps (P trap/floor trap/nahani trap/gully trap etc) inside the building at any floor including cleaning and flusing the pipes upto fist manhole complete all as secified and directed. NOTE : - Above job includes cleaning of each trap and pipe of toilet/bathroom/kitchen block irrespective of length of pipe involved upto first man hole and altogethe shall be taken as one job for payment purpose
Material and labour for rodding and cleaning of sewer line from gully trap to first manhole including gully trap and first manhole of any depth and removing sludge/waste and disposal in low laying area upto 200 mtr of any type by means of using rodding inclduing desludging, descaling and clear the chocking all as specifiea and directed. NOTE : - Any damage made during rodding and cleaning will be made good with no extra cost.
Supply and fixing in repair of PVC (SWR) floor trap 75mm dia plain with PVC grating including jointing with solvent cement complete all as specified and directed.
Supply and fixing of PVC (SWR) Gully trap 125/110mm, plain with grating including seting and jointing with solvent cement complete fixed in repair all as specified and directed.
Supply and fixing of 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor etc including taking down existing pipe of any description complete all as specified and directed.
Supply and fixing of 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor etc including taking down existing pipe of any description complete all as specified and directed.
Supply and fixing in repair of PVC (SWR) bends 75 mm bore complete all as specified and as directed.
Supply and fixing in repair of PVC (SWR) bends 110 mm bore complete all as specified and as directed.
Supply and fixing in repair of PVC (SWR) junction single, (Single T) 110mm bore equal or unequal fitted with access door complete all as specified and directed.
Supply and fixing in repair of 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed.
Supply and fixing in repair of 75 mm bore PVC (SWR) vent cowl complete all as specified and as directed.
Demolition of RCC manhole covers including RCC slab set in cement mortar complete all as specified and as directed.
Material and labour for pre-cast RCC 1:2:4 type B-1 (using 20mm graded mechanically crushed stone aggregate) as in cover slabs (for manhole, drain etc) and simililar articles with plain faces including necessary form work etc, set in cement mortar 1:4 complete all as specified and directed. NOTE : - Reinforcement shall be measured and paid separately under respective items of BOQ.
Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all directed
Material and labour for PCC 1:2:4 type B-1 (Using 20 mm graded mechanically crushed stone aggregate) as in surface channel and drain including necessary use and waste of form work including demolition of existing old cement concrete of any description complete all as specified and directed.
Demolition of brick work built in cement mortar or cement lime mortar including all piller, quoins etc, complete all as specified and directed.
Material and labour for brick work with sub class ‘B’ bricks, straight or curved on plain exceeding 6 metre mean radius in cement mortar (1:6) including demolition of brick work built in cement mortar etc complete all as specified and directed.
Material and labour for brick work (except bricks) straight or curved on plan exceeding 6 metre mean radius built in CM 1:6 (old size brick) etc complete all as specified and directed. NOTE : - Old serviceable brick obtained from demolition shall be reused. The rate quoted against this item is inclusive of necessary cleaning and stacking of bricks before incorporation in the work.
Material and labour for brick work with Sub Class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:6) etc complete all as specified and directed.
Taking down cement plaster of any description and in any position including raking out joints, hacking for key, scrubbing down with water etc of any thickness complete all as specified and as directed.
Material and labour for 15mm thick rendering in cement mortar 1:6 on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement complete all as specified and as directed.
Material and labour for rough cast plaster with and including 15mm thick rendering in CM 1:3 on brick wall or concrete surface as specified in clause 14.22 of SSR Part-I complete all as specified and directed. NOTE : - (i) After applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even. (ii) The mix of cement and sand shall be made slightly loose/wetter than normal for rendering to ensure that larger aggregates are thoroughly covered. (iii) Contractor's quoted rate shall include all above provisions and no extra shall be admissible on this account.
Material and labour for preparation of new plastered surfaces of walls and applying three coats of white wash on wall, complete all as specified and directed.
Material and labour for precast cement concrete louvers and jallies or louvers, 40mm thick (measured solid) 1:2:4 Type B-0 (using 12.5 mm thick graded mechanically crushed stone aggregate), set in cement mortar 1:4 including all mouldings alongwith dismantling existing jallies etc complete all as specified and directed.
Dismantling fencing wire mesh/chain link fencing of any description complete all as specified and directed.
Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in natural ground including taking out embedded portion and making good disturbed ground complete all as specified and directed.
Excavation in post holes (or similar holes) each not exceeding 0.5 cum and getting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering & removing surplus soil to a distance not exceeding 50m & making good surface in soft/loose soil complete all as specified and directed.
Material and labour for PCC 1:4:8 type D-2 (using 40 mm graded mechanically crushed stone aggregates) as in foundation, sub base/post complete all as specified and directed.
Supply and fixed of mild steel, rolled sections (channel, angle or tee sections) fixed independently cut to ordinary length as in post or struts in fencing,ladder etc. including cutting tops to shape as required , drilling holes, notching for wire etc. including flat iron fillets with nuts and bolts for securing chain link fencing including all necessary drilling, bolting or riveting etc conforming to Fe-290 (Gde E-165), complete all as specified and as directed.
Supply only galvanised chain link fencing 4 mm dia & 100x100/75x75 mesh including line wires complete all as specified and directed.
Fixing only chain link fencing including line wires any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed
Supply and fixing of size as directed as in fixing clamps or support to chain link fencing stifners etc fixed with nut and bolts including making necessary holes complete all as specified and as directed.
Material and labour for mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips confirming Fe-410-W (Gde-E-250) quality-A or Fe 290 (Gde - E-165) complete all specified and directed
Supply and fixing of mild steel screw bolts (machine made) dia of neck 5 to 10mm with hexagonal or square head at one end and screwed the other head or screwed both end, each screw end to fitted with 3mm thick MS washers and one hexagonal or square nuts, length of bolt exceeding 5cm but not exceeding 10 cm long complete all as specified and directed.
Supply and fixing of galvanized 2 strand, steel barbed wire, 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with & provision of galvanized mild steel wire, staples or steel pins etc (each line of wire to be measured), including dismantling of deterioted barbed wire fencing complete all as specified.
Dismantling wrought iron or mild steel work of any description not otherwise provided for in any position of unframed/ framed work complete all as specified and directed.
Supply and fixing of mild steel, framed work such as ornamental intricate design grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing framed work of water tanks and similar work including pintal hinges, stops hand made sliding bolts etc conforming to Fe-290 Gde E-165 including taking down existing mild steel work any type complete all as specified and directed.
Supply and fixing in repair fiber glass reinforced translucent plain sheeting 2mm thick with coach screw and washer as in wall cladding including dismantling old unserviceable sheeting complete all as specified and as directed.
Material and labour for 18 to 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, skirting, on vertical surface and like in 10mm thick rendering in CM (1:3) and jointed with grey cement slurry @ 3 Kg/Sqm, and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding, moulding on edges etc and polishing etc including dismantling of existing stone /tiles etc including cement mortar bedding and rubbish off the premises complete all as specified and directed.
Dismantling timber scantling 40 Sq. cm and over in section, in any position of unframed/ framed work complete all as specified and as directed.
Supply and fixing of mild steel, rolled section Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc confirming to Fe 290 (Gde E-165) complete all as specified and directed.
Supply and fixing of mild steel, rolled sections as in main or cross beams, hip and jack rafters, purlin where connected to comman rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates conforming to grade Fe-410(Gde 250), complete all as specified and directed.
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified.
Supply and fixing of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa tensile strength as in roof covering/cladding to wall, fixed with self tapping screws or J type hooks including rubber washer etc complete all as specified and as directed.
Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Material and labour for cleaning of surface drain of girth not exceeding 30cm and depth not exceeding 45cm including removal of waste, vegitation, silt etc outside MOD for free flow of water complete all as specified and directed.
Material and labour for cleaning of surface drain of girth exceeding 30cm and depth exceeding 45cm including removal of waste, vegitation, silt etc outside MOD for free flow of water complete all as specified and directed.
NOTE:- Amount of credit of Rs. 1,29,995.00 for retrieved materials is mentioned in Schedule of Credit Page No 19 of tender documents in pdf form which will be deducted offline while acceptance of tender.
Parveen Kumar (BID ID -3355591)
Swami Enterprises (BID ID -3355527)
AMIT LAMBA (BID ID -3344720)
shiv const co (BID ID -3345786)
Ashwani Kumar (BID ID -3353817)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .