REPAIRS AND DAY TO DAY MAINTENANCE WORKS TO FLOOR WALL ROOF SANITARY FITTINGS JOINERIES CLEANING OF OVERHEAD TANKS INTERNAL WATER SUPPLY AT SATELLITE AREA AND REPAIRS TO SEWAGE LINE IN DAD COMPLEX AT THEVARA

Amount

Dismantling floor or wall tiling including cement mortar bedding and removing rubbish outside MD land complete all as specified and directed

Material and labour for glazed coloured ceramic designed straight edge tiles 300mm X 450mm X 7mm / 300mm X 600mm X 7mm thick in vertical surfaces such as skirting or dado set and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of the tiles over and including a backing coat 10mm thick in CM 1:4 complete all as specified and directed Note: Quoted rate shall be inclusive of backing coat

Material and labour for non skid coloured ceramic tiles 7 to 8mm thick (Square or rectangular as directed by the Engineer in Charge) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor etc set and jointed in neat cement slurry and pointed in coloured or white cement to match the tiles over and including screed bed base 10mm thick in CM 1:6 complete all as specified and directed Note: Quoted rate shall be inclusive of screed bed

Material and labour for non skid coloured ceramic tiles 7 to 8mm thick (Square or rectangular as directed by the Engineer in Charge) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in coloured or white cement to match the tiles over and including screed bed base 10mm thick in CM 1:6 complete all as specified and directed Note: Quoted rate shall be inclusive of screed bed

Material and labour for vitrified tiles, light shade, 10 mm thick (square / rectangular), polished, area of each tile not exc 0.36 sqm, laid in floors using 3mm tile spacers set & jointed in neat cement slurry & pointed using epoxy tile joint filling to match, over and including 10 mm thick Screed bed or bedding layer in CM (1: 4 ) complete all as specified and as directed by Engineer-in-Charge. Note: Quoted rate shall be inclusive of screed bed

Material and labour for vitrified tiles, light shade, 10 mm thick (square / rectangular), polished, area of each tile not exc 0.36 sqm, laid on vertical surfaces/ skirting etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match vertical surfaces with backing coat of 10mm thick in CM (1:4) complete all as specified and as directed. Note: Quoted rate shall be inclusive of backing coat

Material and labour for minor mason work such as racking out joints of floor or wall tiles and making 3mm wide, 7 to 8mm deep joint grooves and filling with epoxy joint filling material to arrest the leakage/ seepage complete all as specified and directed

Material and labour for minor mason work such as racking out joints and filling with Dr fixit crack filler and refixing of loose existing tile if any in floor/wall tiles complete all as specified and directed

Day to day complaints for removal of blockages, replacing rubber washer, rectification of leakage of taps including taking down and refixing in the same position after carrying out the required repairs to bib taps, pillar taps , Angle valves, stop cocks , mixer valves, health faucet, PVC connections, float valves of flushing cistern etc complete NOTE: Complaint slips to be issued from AGE B/R office

Material and labour for PCC 1:2:4 , type B0 using 12.5mm graded stone aggregate as in levelling course to floors, 25mm thick complete all as specified and as directed.

Demolition of brick work, stone / boulder / PCC block masonry built in cement or cement lime mortar complete all as specified and directed

Material and labour for precast cement concrete block masonry with solid blocks exceeding 10 cm width type C1 1:3:6 using 20mm graded stone aggregate set in CM 1:6, complete all as specified and directed

Material and labour for precast cement concrete louvers and jallies, 50 mm thick, type B0 1:2:4 (12.5 mm graded stone aggregate) including all mouldings but excluding frame, set in CM 1:6 complete all as specified and directed

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position above or below ground level removing rubbish outside MD land complete all as specified and directed

Demolition of concrete in ground floors and pavings n exc 15 cm thick (below or above ground level) complete all as specified and as directed.

Supply and fix in repairs white vitreous china wash down water closet (Pedestal pattern) complete including plastic seat cover white, flush pipe and trap, connection to drain, closed pattern with flat bottom, and cover with plastic hinges and connecting to existing outlet pipe complete all as specified and as directed

Supply and fix in repairs plastic water closet seat, any colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device including fixing bolts complete all as specified and as directed

Supply and fix in repair 10 litre capacity PVC valve less syphonic action type, flushing cistern, any colour, low level with inlet, ball valve, float &handle including brackets and connection to stop cock etc complete all as specified and as directed

Supply and fixing PVC connection pipe 15mm outer dia, 450mm long with brass coupling complete all as specified and directed

Supply and fix in repairs vitreous china wash hand basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and provision of fixing of brackets and placing of stand, chromium plated waste coupling with long screwed shank, fly nuts, flange, washers, waste pipe, brass unions complete all as specified and directed

Supply and fix in repairs 100 mm dia stainless steel grating complete all as specified and directed

Supply and fix in repair brass Chromium plated waste coupling 32 mm dia suitable to WHB/ sink complete all as specified and directed

Supply and fix in repair 32 mm dia size PVC waste pipe with cup head for Wash Hand Basin/ sink complete all as specified and directed

Supply and fix in repairs PVC(SWR) floor trap 75mm dia plain with grating including jointing to waste pipe fixed in cement solvent complete all as specified and as directed

Supply and fix in repairs Fancy type Pillar taps of bore 15 mm, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed

Supply and fix in repairs bib cock 15mm bore, fancy type, cast copper alloy with capstan heads chromium plated screwed down complete all as specified and as directed

Supply and fix in repairs Two way Bib cock, 15mm bore fancy type, cast copper alloy with capstan heads chromium plated screwed down fixed complete all as specified and as directed (Make : Jaguar Cat. Part No.CQT23041 or equivalent make from the list of makes)

Supply and fix in repairs 15mm dia concealed stop cock reduced body including CP exposed part, cast copper alloy with capstan heads chromium plated screwed down complete all as specified and as directed (Make : Jaguar Cat. Part No.CON-069FTK AND ALD-069FT or equivalent make from the list of makes)

Supply and fix in repairs stainless steel tubular towel rail 20mm dia , 600mm long, brass chromium plated complete all as specified and as directed (Make : Parry ware Cat. Part No.T6201A1 or equivalent make from the list of makes)

Supply and fix in repairs CP health faucet including flexible SS pipe of 1m length and fittings such as wall clamps etc complete all as specified and as directed (Make : Jaguar Cat. Part No. ALD 587 or equivalent make from the list of makes)

Material and labour for cutting, grinding of terrazzo tiles or kota stone floor etc with grinding machine after filling the pits and holes with matching cement and polishing with 3 step grinding stone complete on floor/ vertical surface of wall such as dado, skirting etc complete all as specified and directed

Supply and fix in repairs aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or re-fixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed

Supply and fix PVC (SWR) junction single (Single T) 110mm bore complete all as specified and as directed

Supply and fix 110 mm dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to wall with and including clamps complete as specified and directed

Supply and fix 75 mm dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to wall with and including clamps complete as specified and directed

Supply and fix 75 mm dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints laid in floor complete as specified and directed

Supply and fix 110 mm dia PVC (SWR) bends any radius with access door complete all as specified and directed

Supply and fix 75 mm dia PVC (SWR) bends any radius with access door complete all as specified and directed

Supply and fix PVC (SWR) branch piece, single (single Y) equal or unequal 75mm bore complete all as specified and as directed

Supply and fix PVC (SWR) branch piece, single (single Y) equal or unequal 110mm bore complete all as specified and as directed

Supply and fix PVC (SWR) junction single (Single T) 75mm bore complete all as specified and as directed

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exceeding. 1.5 Sqm each complete all as specified and directed

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed

Taking down shutters of any description area not exceeding 1 Sqm each complete all as specified and directed

Taking down shutters of any description area exceeding 1.00 Sqm and not exceeding 2.00 Sqm complete all as specified and directed

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed

Supply and fix 2nd class hard wood plain, solid, straight chowkat and frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed

Supply and fix 2nd class hard wood 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed

Supply and fix 2nd class hard wood 30mm thick glazed and skeleton shutter open rebated and prepared to receive glass, gauze etc without sash bars edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, gauze etc size of members of shutters as specified in SSR Part I, Section 8,clause 8.24(a) complete all as specified and directed

Supply and fix 2nd class hard wood 30mm thick glazed and skeleton window/ ventilator shutter open rebated and prepared to receive glass, gauze etc without sash bars edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, gauze etc size of members of shutters as specified in SSR Part I, Section 8,clause 8.24(b) complete all as specified and directed

Supply and fix 2nd class hard wood Flush shutters, 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

Hacking out old broken glass (any thickness size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fitted with beads complete all as specified and directed

Resecuring or easing & adjusting without taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed

Material and labour for 4 mm thick sheet glass one side frosted ordinary quality fixed with glazing with oil putty in square n.exc 0.50 sqm in each pane complete all as specified and as directed .

Material and labour for 4 mm thick plain sheet glass ordinary quality fixed with glazing with oil putty in square n.exc 0.50 sqm in each pane complete all as specified and as directed

Supply and fix stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed

Supply and fix in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed

Supply and fix Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed

Material and labour for repair to aluminium doors of size n.exc 2 Sqm and making good and functional including changing of pivot, repairs to lock,handle,rubber beadings etc complete all as specified and as directed Note: The quoted rate shall be inclusive of the cost of lock,handle,rubber beading etc

Material and labour for repair to aluminium window of SLIDING /OPENIBLE any size, pattern and any number of shutter & making good and functional including changing of pivot, replacement of rollers, friction hinges repairs to lock,handle,rubber beadings etc complete all as specified and as directed Note: The quoted rate shall be inclusive of the cost of lock,handle,rubber beading, rollers, friction hinges etc

Material and labour for PCC 1:2:4 , type B1 using 20mm graded stone aggregate for fixing holdfast, for coping or chamfered on edges including necessary form work, complete all as specified and as directed

Supply and fix Mild steel work as in holdfast and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed

Supply and fix Aluminium anodised barrel tower bolt extruded section of 200 mm long complete all as specified and as directed

Supply and fix Aluminium anodised barrel tower bolt extruded section of 100 mm long complete all as specified and as directed

Supply and fix 200mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed

Supply and fix extruded aluminium alloy handles fabricated type anodised 125 mm size complete all as specified and as directed

Supply and fix extruded aluminium alloy handles fabricated type anodised 100 mm size complete all as specified and as directed

Supply and fix stainless steel butt hinges 100mm size, medium weight complete all as specified and as directed

Supply and fix stainless steel butt hinges 75mm size, medium weight complete all as specified and as directed

Supply and fix Continuous (piano) hinges (30mm flap width), mild steel, bright finish or electrogalvanized complete all as specified and as directed

Supply and fix in repairs 375mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed

Supply and fix in repairs brass mortice lock vertical type 75 mm, 2 levers complete all as specified and as directed

Supply and fix in repairs 40mm dia, brass cupboard knobs fixed with nut, screw and washer, bright finished, polished complete all as specified and as directed

Supply and fix hasp and staple 100mm, safety type aluminium anodised with hinges including bolt to hinge plate and fixed with screws complete all as specified and as directed

Supply and fix door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring, fixed in floor, 140mm over length of cover plates complete all as specified and as directed

Supply and fix in repairs flushing cistern syphon set, complete internal for flush tank 10 litres capacity push button for single layer for PVC flush complete all as specified and directed

Taking down cement plaster on brick or stone wall surface etc including raking out joints ,hacking for key, scrubbing down with water etc complete all as specified and directed

Material and labour for rendering 10mm thick with CM 1:4 mixed with water proofing compound on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed (Note: water proofing compound shall be measured and paid separately. Dosage WPC shall be as per manufactureres instruction.)

Material and labour for rendering 10mm thick with CM 1:4 mixed with water proofing compound on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as neeru finish complete all as specified and as directed (Note: water proofing compound shall be measured and paid separately. Dosage WPC shall be as per manufactureres instruction.)

Material and labour for rendering 5mm thick in cement mortar 1:3 on ceiling, finished even and smooth without using extra cement complete all as specified and directed

Supply only liquid water proofing compound complete all as specified and as directed

Material and labour for preparing newly plastered surfaces of ceiling including cornices and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparing new wooden surfaces of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed

Material and labour for preparation of new decorated surfaces of walls (plastered or un-plastered) including cornices and applying two coats of cement base paint over a coat of priming complete all as specified and as directed

Removal of vegetation /shrubs on inaccessible roofs or projections etc and spraying of acid of required qty complete from any location of building and making good the disturbed surfaces with cement mortar 1:4 or with cement concrete type C1 1:3:6, using 20mm graded aggregate including necessary scaffolding complete all as specified and as directed

Resecuring or easing & adjusting without taking down Shutters of any description not exc 1 sq. m each complete all as specified and directed

Supply and fix in repair 2nd class hard wood, small fittings such as brackets of any type latch and hinge blocks, shaped door and window stops and the like including all necessary labours, articles not exceeding 200 Cu cm each complete all as specified and directed

Supply and fix in repairs 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed

Material and labour for 18 to 20 mm thick machine cut, polished granite 1st quality "black" stone slab over kitchen platform and similar places over and including 15mm thick screed bed in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match with existing surface including demolition of existing stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including grinding and moulding of exposed edges of granite complete all as specified and as directed Note: Quoted rate shall be inclusive of screed bed

Supply and fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing size 60cm long (with brass bracket) complete all as specified and directed

Supply and fix in repairs, corner glass shelf with brackets, single layer, chromium plated bracket and railings complete all as specified and as directed. Note: Make shall be of Jaguar cat part No CAN-1173 or equivalent make from the list of makes

Dismantling wall /ceiling board (Fibre pulp insulation) or insulation boards any thickness including grid frame complete all as specified and as directed.

Supply and fix Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.

Supply and fix Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed

Supply and fix 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed

Dismantling of plain or corrugated steel sheeting any gauge, thickness including nainital or similar pattern roof covering complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified.

Supply and fix prepainted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and as directed.

Supply and fix Roof trusses (framed) conforming to Fe 410W, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed

Material and labour in repairs 12mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nail to timber frame work complete all as specified and as directed

Supply and fix for powder coated anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

Supply and fix powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed

Supply and fix for powder coated anodised aluminium window and ventilator shutter powder coated side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and directed

Supply and fix in repairs 9 mm thick pre-laminated particle board, interior grade, pre-laminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed

Material and labour for 5.5 to 6 mm thick sheet glass, ordinary quality fixed with glazing clips/aluminium cleats in square n.exc 0.50 sqm in each pane all as specified complete all as specified and as directed

Supply and fix in repairs Fancy type Pillar taps of bore 15 mm, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed Make : Pillar Tap with aerator Parry ware Cat Part No.Crust T3102A1 or equivalent make from the list of makes

Material and labour for water proofing treatment by applying oil bound bituminous primer 0.20 kg/sqm, providing and laying 4 mm thick APP modified water proofing membrane weighing not less than 4 kg/sqm, reinforced with non-woven polyester matt not less than 160 g/sqm, having softening point not less than 1400 C longitudinal tensile strength not less than 650 N/Sqcm tearing strength of 180 N by torque application including minimum 10 cm side overlap and 15 cm end lap and applying a coat of blown grade hot bitumen 85/25 conforming to IS : 702 heated to a working temp of 180 degree and applied @1.2kg/Sqm finishing the surface with solar reflective bituminous aluminium paint @ 100 g/sqm, complete all as specified and as directed

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wire mesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fix in repairs aluminium (extruded section) Door closer hydraulically regulated, designation No.3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed with stainless steel screw complete all as specified and directed

Supply and fix in repairs Ball bearing runners 45 mm, 500 mm long telescopic ball bearing drawer channel full extension load capacity 50 kgs complete all as specified and directed

Supply and fix in repairs stainless steel auto closer counter sunk hinges complete all as directed and as directed

Supply and fix in repairs 100mm long stainless steel handle complete all as directed and as directed

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed

Material and labour for PCC 1:2:4 , type B0 using 12.5mm graded stone aggregate as in repairs to top surface of pavement and flooring etc finished even and smooth without using extra cement, 40mm thick complete all as specified and as directed

Material and labour for plain cement concrete 1:3:6 type C1, (20mm graded stone aggregate) 75 mm thick as in plinth protection and finished the surface even and fair without using extra cement complete all as specified and directed

Material and labour for plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate in foundation, filling and mass concrete complete all as specified and as directed

Material and labour for 100mm thick cement concrete type B2, 1:2:4 (using 40 mm graded stone aggregate) as in Path/Hard Standing finished even and smooth with out using extra cement complete all as specified and as directed

Supply and fix in repair sinks, made of stainless steel 1 mm thick kitchen sink with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including waste coupling and waste pipe complete all as specified and directed

Cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for damp proofing course, etc., and making good, cutting exc 20 cm girth complete all as specified and directed

Supply and fix in repair bib taps, cast copper alloy with crunch or butter fly handle copper alloy fancy type chromium plated screwed down for 15 mm bore complete all as specified and directed

Supply and fix in repair angle Stop valves, cast copper alloy chromium plated fancy type screwed down for 15 mm bore pipe complete all as specified and directed

Supply and fix in repairs PTMT gratings with provision to receive the waste water pipe and fixed with white cement alround, 100 mm dia with minimum weight 25 gms complete all as specified and directed

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store, 15mm dia complete all as specified and directed

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store, 20mm dia complete all as specified and directed

Material and labour for Kitchen utensil stand stainless steel of size 75 x 75 cm complete all as specified and directed

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store, 25mm/32mm dia complete all as specified and directed

Supply and fix on wall/ ceiling/ laying in floors or concealed on wall, high pressure CPVC pipes SDR-11 & plain CPVC SDR 11 fittings of dia 16mm including all necessary fittings, solvents complete all as specified and directed

Supply and fix on wall/ ceiling/ laying in floors or concealed on wall, high pressure CPVC pipes SDR-11 & plain CPVC SDR 11 fittings of dia 20mm including all necessary fittings, solvents complete all as specified and directed

Supply and fix on wall/ ceiling/ laying in floors or concealed on wall, high pressure CPVC pipes SDR-11 & plain CPVC SDR 11 fittings of dia 25mm including all necessary fittings, solvents complete all as specified and directed

Supply and fix in repairs, PVC bathroom cabinet (white) of size 420 x 300 x 100mm (approx.), with one single shutter and built in mirror in front of shutter complete all as specified and as directed

Material and labour for cleaning HDPE water storage tanks of capacity 750 to 1000 litres on roofs or at any position situated in different locations at satellite area by draining out entire water, removing sludge, mud, etc., brushing / rubbing with wire / nylon brush / mop to remove all algae / fungal growth and moss, etc entirely from walls, floors, ceilings, etc washing clean with fresh water by using water jets and then again washing and treating with anti-bacterial agents, disinfectants and bleaching powder and including writing the words " DATE OF CLEANING", "TANK CAPACITY and "MILITARY ENGINEER SERVICES" in capital letters of suitable size on outside visible place of tank with synthetic enamel paint(white/black) complete all as specified and as directed Note : Same tank may required to be cleaned several times during the contract period and each time shall be measured separately

All as per item No 134 here-in-before but for HDPE tank capacity 500 litres complete all as specified and directed Note : Same tank may required to be cleaned several times during the contract period and each time shall be measured separately

All as per item No 134 here-in-before but for HDPE tank capacity 250 to 300 litres complete all as specified and directed Note : Same tank may required to be cleaned several times during the contract period and each time shall be measured separately

Material and Labour for scrubbing, cleaning etc thoroughly, RCC OH service tank 1.5 to2.0 lakhs Ltr capacity situated in different locations at satellite area by draining out entire water, removing sludge, mud, etc., brushing / rubbing with wire / nylon brush / mop to remove all algae / fungal growth and moss, etc entirely from walls, floors, ceilings, etc washing clean with fresh water by using water jets and then again washing and treating with anti-bacterial agents, disinfectants and bleaching powder and including writing the words " MILITARY ENGINEER SERVICES, TANK CAPACITY AND DATE OF CLEANING" in capital letter of suitable height matching with the existing marking at outer wall with synthetic enamel black/white paint , all as specified and directed Note : Same tank may required to be cleaned several times during the contract period and each time shall be measured separately

All as per item No 137 here-in-before but for RCC OH tank capacity 20000 to 25000 litres complete all as specified and directed Note : Same tank may required to be cleaned several times during the contract period and each time shall be measured separately

All as per item No 137 here-in-before but for RCC OH tank capacity 10000 litres complete all as specified and directed Note : Same tank may required to be cleaned several times during the contract period and each time shall be measured separately

All as per item No 137 here-in-before but for RCC OH tank capacity 75000 to 100000 litres complete all as specified and directed Note : Same tank may required to be cleaned several times during the contract period and each time shall be measured separately

Supply and fix Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top),3 layered, white colour, hoisted & fixed in position of capacity 2000 litres including25 mm dia PTMT float valve and taking out u/s old tank complete all as specified and as directed

Material and labour for preparing the exposed outer surface of UG / AG sumps situated in different locations at satellite area ,by cleaning with wire brush, brooming etc & applying one coat of exterior weather coat antifungal paint complete all as specified and as directed

Material and labour for TMT (CRS) bars 5mm to 10mm dia cut to length bent to shape required including cranking, bending spirally for hooping column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed

Material and labour for (1:2:4) type B1 using 20mm graded stone aggregate in landings, cover slabs (for manholes etc) challah hoods, chajjas,water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 including necessary formwork complete all as specified and as directed Note: Reinforcement shall be measured and paid separately

Opening/Lifting of Man hole cover of septic tank/soak well and taking out waste soil, sludge, other sediments, solid waste, and liquid waste in any condition by pumping or any other mechanical means, and refix the man hole cover on completion of work, complete all as specified and as directed Notes:- (a) The night soil, other sediments, solid waste, and liquid waste in any condition removed from septic tank shall be taken away from respective vicinities/ Premises on closed containers/conveyance and disposed off out of defence land. The quoted rate shall be inclusive for the same. (b) Disposal of the same shall be the responsibility of the contractor with out any extra expenditure to government. Disposal of waste shall be made in accordance with the regulations of authorities concerned. c) The unit rate quoted shall be deemed to be inclusive of cleaning the neared MH & sewage line from that MH to septic tank

All as per item No 145 above but for manhole area not exc 1 Sqm and depth up to 1m complete all as specified and directed

All as per item No 145 above but for manhole area not exc 1 Sqm and depth 1m to 1.50 m complete all as specified and directed

Cleaning by roding or with bamboo and taking out waste soil , silt, sludge and other foreign materials from sewage lines/effluent drains below /above GL of 100mm dia ,removed all waste in sealed container as mentioned in item No 145 above complete all as specified and as directed

All as per item No 148 above but for 150mm dia sewage lines complete all as specified and directed

Cleaning of culverts and covered drains of any depth/width after removal of RCC cover slab and refixing the same in position after cleaning and removal of silt to outside the defence land complete all as specified and directed Note: Cleaning to be done pre monsoon and post monsoon as per site requirement and shall be measured separately all as specified and as directed by Engineer In Charge.

Labour only for removing blockage of WC Indian/European type urinal/bath or kitchen traps including cleaning of WC pan/floor traps/Nahani traps and removing blockage of down take pipes up to 1st manholes complete all as specified and directed

Material and labour for destruction of growth of weed plants with roots on the roof of bldgs or on the wall of bldgs at any height with 2.40 'D' oil mixed weedicides or mixed with veedol chemical solution and sprayed in and around roots and at places of possible growth of weeds complete all as specified and directed Notes:- (i) In case of plants that has trees like growth, the plant should be cut to avoid damages to roof/wall and rest to be treated with chemical solution (ii) The area after treatment shall be cleaned off all debris branches dead plant, (iii) Rate shall be inclusive of height upto 12 storey building including necessary scaffolding safety arrangements etc.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar and taking out of trenches and removing debris incl concrete bed haunching from the site to a distance n.exc 100 m complete all as specified and directed

Excavating in trenches not exceeding 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft / loose soil complete all as specified and as directed

Material and labour for plain cement concrete 1:3:6 type C2 (using 40mm graded aggregate) as in bed to drain pipe, 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested including necessary shuttering and supports to concrete complete all as specified and as directed

Supply and fix 150 mm dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints laid in trenches complete as specified and directed

Material and labour for plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in foundation, filling, mass concrete, surface channels and in drains complete all as specified and as directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred or stopped ends complete all as specified and as directed

Material and labour for brick work in CM 1:4 using sub class 'B' bricks straight or curved on plan exc.6 meters mean radius complete all as specified and as directed

Material and labour for rendering 15mm thick cement plaster in CM 1:4 on fair face of brick work including finishing the surface even and smooth without using extra cement complete all as specified and as directed

Supply and fix in repairs 100 mm dia cast iron branch piece single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches with cement joints upto 4th storey complete all as specified and as directed

Supply and fix in repairs 75 mm dia cast iron branch piece single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches with cement joints upto 4th storey complete all as specified and as directed

Supply and fix in repairs, 100 mm bore Cast Iron Soil, waste and vent pipes, in any length with or without ears, with cement joints , fixed on wall complete all as specified and as directed

Supply and fix in repairs, 75 mm bore Cast Iron Soil, waste and vent pipes, in any length with or without ears, with cement joints ,fixed on wall complete all as specified and as directed

Supply and fix in repairs PVC (SWR) junction single (Single T) 75mm bore equal or unequal provided with access door complete all as specified and as directed

Supply and fix repairs PVC (SWR) junction single (Single T) 110mm bore equal or unequal provided with access door complete all as specified and as directed

Supply and fix in repairs 75 mm dia PVC (SWR) bends any radius including jointing with solvent cement complete all as specified and directed

Supply and fix in repairs 110 mm dia PVC (SWR) bends any radius including jointing with solvent cement complete all as specified and directed

Supply and fix in repairs cast iron bends any radius 100 mm bore diminishing pieces or tapers (large bore measured) including jointing with solvent cement complete all as specified and directed

Supply and fix in repairs cast iron bends any radius 75 mm bore diminishing pieces or tapers (large bore measured) including jointing with solvent cement complete all as specified and directed

Supply and fix in repairs 100mm CI bend with oval access door with bolts and rubber gasket to make it water tight complete all as specified and directed

Supply and fix in repairs 75mm CI bend with oval access door with bolts and rubber gasket to make it water tight complete all as specified and directed

Supply and fix in repairs, 100 mm bore Cast Iron Soil, waste and vent pipes, in any length with or without ears, with cement joints ,laid in trenches or in floors complete all as specified and as directed

Supply and fix in repairs, 75 mm bore Cast Iron Soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and as directed

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required 150mm bore complete all as specified and as directed

Material and labour for PCC (1:2:4) type B-0 using 12.5 mm graded crushed stone aggregate as in benching, coping etc including necessary form work complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft/loose soil complete all as specified and as directed

Removing excavated material (soils) exc. 50m and not exc 100m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed

Material and labour for 75mm thick plain cement concrete 1:4:8 (40mm graded stone aggregate) type D2, as in sub base complete all as specified and directed

Material and labour for Machine pressed precast concrete interlocking paver block any shape and size as approved conforming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and pigment, over and including 50mm thick coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm Spreading and levelling in layers n exc. 25cm thick and add for well ramming including watering as required complete all as specified and as directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed

Material and labour for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments including screed bed or bedding layer in cement mortar 1:4, 20mm thick for laying floor finishes including dismantling of old tile complete all as specified and directed Note: Quoted rate shall be inclusive of screed bed

ST ANTONY CONSTRUCTIONS

Oriental Constructions