Construction of Fgd Hut Balla Beat Shahpur Forest Range under Dharamshala Forest Division.

Excavation in soil in Hilly Area by mechanical means including cutting and trimmingslopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20Technical Specification Clause 1603.1.

Excavation in foundations, trenches etc., in earth work, lift up to 1.50 Meters stackingexcavated soil not more than 3 meters clear from the edge of the excavation and thenthe stacked soil in 15cm. layers, when required in to plinths sides of foundationsconsolidating each deposited layer by ramming and watering and then disposing of all surplusexcavated earth as directed with in a lead of 20 meters. :-Pick and Jumper Work.

Providing and laying cement concrete 1:6:12 (1 cement:6 sand : 12 graded stone aggregatemm nominal size) and curing complete excluding cost of centring and shuttering in:Foundation and plinth:

Random rubble masonry with hard stone in foundation and plinth including levellingcement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mmsize) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing form work with steel plates 3.15mm.thick welded with angle iron30x30x5mm. so as to give a fair finish including centring, shuutering, strutting andetc. with wooden battens and ballies, height of propping and centring below supporting floor toceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concreteconcrete work in:Lintels, beams, plinth beams, girders, bressumers and cantilevers

Providing and laying in position specified grade of reinforced cement concrete, excludingcost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:2:4cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placingposition and binding all complete upto plinth level:-Mild steel and Medium Tensile steel bars

Brick work with common burnt clay F.P.S. (non modular) bricks of class designationsuperstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar1:6 (1 cement : 6 coarse sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fasteners of required& length ( hold fast lugs or dash fastener shall be paid for separately).Sal wood

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dippedzinc coated sheet with top coat of regular modified polyster (RNP) organic coatingmicrons over 5 microns primer coating to back coat of polyster of 5 microns over 5primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre withprepainted limpet and rubber washers complete with all accesoriees as required as per thedirection of Engineer-in-charge.