PERIODICAL SERVICES OF CERTAIN OTM/MD ACCNS OTHER THAN OFFRs AND DHARAMPORE COLONY AT MIL STN KANCHRAPARA UNDER GE BARRACKPORE

Amount

Taking down cement plaster of any description on brick or stone or concrete surface of wall etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Removing plant including roots by dismantling of brick work/PCC/RCC including necessary scaffolding any type in any location/position i.e. roof, parapet wall near pipes etc and applying concentrated hydrochloric or sulphuric acid after removing roots for preventing the regrowth and making good of disturbed portion using PCC (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) complete all as specified and directed.

S&F of 3mm thick ACP (Aluminium composite panel) conforming to IS-736, size 350mm x 250mm, covered with high intensity grade (Class C, Type VIII, IX, XI) retro reflective sheeting of green colour as per IRC standard meeting on one side with computer cut letters on high intensity grade retro reflective sheet (white colour) marking Bldg Nos and fixed with stainless steel screws on four corners to walls using PVC plugs complete all as specified and directed. (Make of ACP board : Alex/Panel/Eurobond/Alstrong. Make of retro reflective sheet : 3M/Darkeye/Avery)

M&L for rendering 15mm thick in cement mortar (1:6) on brick work or concrete surfaces of wall, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick in cement mortar (1:3) on ceiling, chajja etc surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for cleaning vertical and horizontal surfaces of unplastered masonry wall and concrete surfaces for loose materials/dust and applying two coats of epoxy resin component (Dr. Fixit DAMPGUARD or equivalent) solution/mix using nylon brush pouring Base part in appropriate container followed by the Hardner part and mix thoroughly to attain homogeneous smooth paste and dilute the mixed compound with water in ratio 1 part Base : 1 part Hardner:1 part water by slow addition and mix thoroughly until a brushable consistency is obtained, first coat will be allowed to dry for 6 to 8 hrs before application of second/final coat) including curing treated surface for 24 hrs complete all as specified and as directed.

M&L for 3mm thick wall care putty on wall surfaces complete all as specified and directed.

M&L complete removal of existing treatment & levelling of wall surface using MECHANICAL/ ELECTRICAL OPERATED SANDING/SCRAPING MACHINE WITH INBUILT VACCUM SUCTION system to such the existing treatment as retrieved by scrapping/sanding etc for obtaining smooth paintable surface complete all as specified and directed.

M&L for applying one coat of cement base paint after preparation of old surfaces of wall complete all as specified and directed.

M&L for preparation of old surfaces (plastered or unplastered) of ceiling including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash complete all as specified and directed.

Material & Labour for applying two coats of 100% Premium acrylic emulsion paint(using AIR-LESS PAINT SPRAYER) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall surfaces by using AIR-LESS PAINT PRIMER SPRAYER including preparation/levelling of old surface of wall using manual sand papers(where reqd) of approved grade complete all as specified and as directed.

Ditto item No. 12.00 here-in-before but applying 01 coat of 100% Premium acrylic emulsion paint on old surface of wall complete all as specified and as directed.

M&L for two coats of Oil bound distemper over prepared surface of wall over a coat of primer using AUTO-ROLLER and AIR-LESS PAINT SPRAYER complete all as specified and directed.

Ditto as per item No. 14.00 here-in-before but 01 coat of oil bound distemper on existing surface of wall complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint (1st grade quality) after preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm in width or girth complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint (1st grade quality) after preparation of old painted steel surfaces of any description, over 10cm in width or girth, not otherwise described complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint (1st grade quality) after preparation of old painted steel surfaces of any description, not exceeding 10cm in width or girth, not otherwise described complete all as specified and directed.

M&L for painting lines, dashes, arrows, letters etc. On roads, pavements, kerbs, parapets etc in adequate nos of coat as directed to obtain bright finishes colour/texture and the like exceeding 10cm wide with road marking paint, white or golden yellow complete all as specified and directed.

N C DUTTA (BID ID -3119691)

PUNAM ENTERPRISE (BID ID -3119403)

S S ENTERPRISE (BID ID -3119357)

R.S. COMPANY (BID ID -3119569)

M/s S K SHARMA (BID ID -3118425)

TAMALIKA ENTERPRISE (BID ID -3119428)

Kiran Traders (BID ID -3119480)