State Plan 2022-23

Amount

Electrical Work

OD15650/2023-2024:1. Pump - Supply, erection, testing and commissioning of Kirlosker / KWA pre qualified reputed make Centrifugal pump sets with Bronze/SS impeller, SS shaft and CI pump casing with suitable type of base plate with coupling, coupling guard foundation bolts and nuts etc. complete suitable for coupling the pump and motor above the base plate etc complete including providing suitable concrete foundation including cost of cement, sand and metal etc complete. The duty condition is as follows- discharge- 140 lps-total head - 20 m, Speed -1480 rpm 2. Motor - supply , erection , testing and commissioning of KWA pre qualified reputed make horizontal solid shaft foot mounted TEFC squirrel cage induction motor suitable for the above pump working 3 phase 50HZ AC supply , working voltage 415 V / 3300 V . The motor shall confirm to EEFI / IS325 including providing suitable concrete foundation including cost of cement, sand and metal etc complete. Flexible coupling shall be used for coupling of pumps and motors 3. Starter -Supply ,erection testing and commissioning of suitable heavy duty Soft starter with all protections, digital type multifunction meters , indicators and shall be provided with a bypass contactor of suitable rating ,earthing ,busbar interconnections, control wiring complete as per standards.

OD15675/2023-2024:Dismantling existing cable connections, dismantling existing motor and pump set including structural base, dismantling existing sluice valve , NRV ,existing suction and delivery MS/CI pipe line including hire of tools, labour charges, etc. complete and stacking the dismantled items as per the direction of departmental officers

OD134097/2023-2024:Supply, laying, testing and commissioning of 1.1 KV grade 3.5Core x 185sq.mm Aluminium conductor armoured cables for the above pump set from panel board to starter

OD134096/2023-2024:Supply, laying, testing and commissioning of 3 runs 70 sq.mm PVC insulated copper cable through 63 mm PVC pipe, flexible hose and accessories from starter to motor considering energy conservation

OD134094/2023-2024:Supply, erection, testing and commissioning 25 KVAR of heavy duty APP capacitor for the above motor to get unity power factor . The capacitor shall confirm to IS 2834

OD134095/2023-2024:Supply of all material and providing duplicate earthing by 25 x 3 mm copper strip on wall /column/floor/ buried (Appx. 20 mtrs) in ground and giving double earthing to motor, starter, panel board etc. and connect with existing earthbus. As per IE standards

15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Mechanical Work

100.98.486:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 250mm.

100.98.433:Supply of CI Non Return Valve, Conforming to IS 5312 Part I - 1984, PN 1.0, Size 250mm.

100.31.2.6:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 250mm diameter, Class II.

100.37.8.1:In situ fabrication of M.S. pipes of size 250mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.

100.37.8.2:Fabricating M.S. flanges of diameter 250mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.8.3:Cutting 250mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.8.4:Welding 250mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.8.5:Grinding cut and weld edges of 250mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

18.30.6:Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:250 mm diameter pipe

OLFIN PAUL

Bidder Name

SRI ROYAL ELECTRICALS

OLFIN PAUL