PROVN OF HARSTANDING NEAR DV BR HQ UB AREA, BOUNDRY WALL NEAR RA LINES AT HQ UB AREA, 02x STEEL GATE AND GUARD POST OF LOKHART LINE, ADDN/ALTN AT BLDG NO RA 3 OF HQ UB AREA, CAR PARKING AND B/WALL NEAR JAG BR TO STN HQ CELL UNDER GE (WEST) BAREILLY.

Amount

Surface excavation in soft/loose soil not exc 30 cm deep and average 15cm deep and getting out complete all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5m depth and n.exc 1.5m width for foundation etc and getting out complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed.

Removing excavated material (soil) to a distance not exceeding 50m and deposited where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

Returning filling in soft/loose soil in trenches after laying pipes, construction of manholes etc incl spreading, leveling and watering and well ramming in 25cm thick layers complete all as specified and directed.

M&L brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed.

M&L 15mm thick cement plaster on brick surfaces or concrete surfaces (on external surface) in cm (1:4) on newly fair face surface even and smooth without using extra cement and necessary scaffolding complete all as specified and directed.

M&L 15mm thick cement plaster on brick surfaces or concrete surfaces (on external surface) in cm (1:4) on newly surface other than fair faces without using extra cement and necessary scaffolding complete all as specified and directed.

M&L two coats of cement base paint on new plastered wall surfaces over a coat of primer of any description including preparation of surfaces, complete all as specified and directed.

M & L formwork to sides and soffits of lintels,lintel bend, beams floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, finished rough surfaces of concrete complete all as specified and directed.

M & L formwork to sides of pillars, posts, struts, piers, columns and stanchions square, rectangular finishes rough surfaces of concrete.etc finished rough surfaces of concrete complete all as specified and directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than .9mm dia. complete all as specified and directed.

M & L for providing reinforced cement concrete 1:2:4 (Nominal Mix) type B-0, using 12.5 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, base of columns and the like complete all as specified and directed.

M & L for providing reinforced cement concrete 1:2:4 (Nominal Mix) type B-0, using 12.5 mm graded stone aggregate, as in beams, cantilevers, bressummers, lintels over 1.50 m span and the like complete all as specified and directed.

S & F of rolled mild steel joist, channel, angle, flat iron or Tee sections, fixed independently without connecting plates etc. (cut to ordinary length i.e. within 20 mm of length) confirming to Fe-290 Grade E-165 complete all as specified and directed

M&L applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.

M&L for framed work as in doors or ornamental and intricate design gates of angle or other section with gusset plates, rails, braces, including pintal etc. complete, drilled for fixing of steel sheeting or othercovering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe-410- W(Gde- E-250) quality- B complete all as specified and directed.

S&F razor wire 2.24mm dia with 20mm wide and 0.50mm thick razor strip fixed with clamps in rows and angle iron bracket/frame over boundary wall etc complete all as specified and directed by Engre in charge (Note : Each Razor wire and angle iron frame/bracket shall be measured and paid separetely.)

S& F diamond shape high strength steel punched tape concertina coil 600mm dia (in specific stretched posion) hot dip galvanised coated with CLR anti corrosive paint by making diamond shape with the help of dove tail clips (18 SWG) fixed over razor with the help of hog rings (14 SWG) in angle iron bracket/frame over boundry wall etc complete all as specificed and directed. (Note : Razor wire and angle iron frame/bracket shall be measured and paid separetely.)

M&L for RCC 1:2:4 nominal Mixed Type B1 (20 mm graded aggregate) for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for use & waste of flat and rough surface formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L For RCC 1:2:4 Nominal Mixed type B1 (20 mm graded aggregate) for Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L For RCC 1:2:4 Nominal Mixed type B1 (20 mm graded aggregate) for Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc and the like complete all as specified and directed.

M&L for RCC 1:2:4 Nominal Mixed type B1 (20 mm graded aggregate) for Chajjas, slab etc complete all as specified and directed.

M&L for use & waste of flat and rough surface of formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

M&L cement concrete 75mm thick type B-0, 1:2:4 (12.50mm graded aggregate) as in floor complete all as specified and directed.

M & L for non-skid ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match of tiles and screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

All as per serial item No 28 as above but as in vertical surfaces of tiles and rendering 10 mm thick in cement mortar 1:4, complete all as specified and directed.

M&L rendering 12mm thick in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces complete all as specified and directed.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1 : 4 mixed with WPC @ 3 % by the weight of cement used and finishing even and smooth without using extra cement complete all as specified.

Supply only Water proofing compounding complete all as specified and directed.

M&L preparation and necessary cleaning of surface free from dust ,loose paint etc by skilled labour and applying two coat Oil Bound Distemper on wall over one coat of cement putty of 1.5mm thickness complete all as specified and directed.

M&L preparation and necessary cleaning of surface free from dust ,loose paint etc by skilled labour and applying two cement base paint on wall complete all as specified and directed.

M & L for plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection 75 mm thick finished even and smooth without using extra cement including forming 10 mm wide joints at not exceeding 3 m distance between adjoining slabs shall not exceed 10 mm in thickness and shall be filled with bitumen mastic i.e. bitumen and sand in proportion 1:2 all as specified or as directed.

S&F mild steel framed work as in window guard bars, grills, grating, chowkhat. bar or forged into spikes, framed balusters, walkway railing etc and similar work including welding complete FE-290 grade E-165 complete all as specified and directed.

S&F 0.63mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

M&L RCC 1:2:4 Nominal Mixed type B1 (20 mm graded aggregate) for Beams, cantilevers, bressummers, lintels any span complete all as specified and directed.

M & L plain cement concrete type C2 1:3:6 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M & L for hard core broken bricks of gauge not exc. 63mm, deposited, spread and levelled in layerfs not exc. 15 cm thick watered and rammed to a true surface of broken stone or boulders etc.

M&L two coats of cement base paint on new plastered wall surfaces over a coat of white cement wash of any description including preparation of surfaces, complete all as specified and directed.

Excavation in post holes (or similar holes) each n. exc. 0.50 CUM and getting out, returning filling in and ramming earth in layers n. exc. 25 cm watering and removing surplus soil and making good disturb surface in soft/loose soil complete all as specified and directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters;purlins where connected tocommon rafters and running railsand guides for sliding doors;fixed with angle cleats or other connecting plates complete all as specified and directed.

S & F prepainted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / clading to wall, fixed with self tapping screws Complete all as spd and directed.

S & F prepainted galvatume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / clading to wall, fixed with self tapping screws Complete all as spd and directed.

Dismantling of Asbestos cement corrugated or semi corrugated etc sheets in roof covering complete all as specified and directed.

S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed

M&L for Vitrified tiles coloured ceramic tiles light shade 8-10mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm and not exc 1.00 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement and with 15mm thick screed bed 1:6 cement mortar including dismantling of existing flooring complete all as specified and directed.

All as per serial item No 52 above but as in vertical surfaces including dismantling of tiles and rendering 10 mm thick in cement mortar 1:4, as in backing layer complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not excediding 0.38 sqm, in wall , skirting & dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick plastering of cement mortar 1:6 at any storey of bldg complete all as specified and directed.

M&L for 7 to 8 mm thick (Glazed ceramic tiles in vertical surface 600X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering/backing layer in cement mortar 1:4 at any storey of bldg complete all as specified and directed.

M & L for machine cut kota stone slab flooring 18-20 mm thick over and including 20mm cement screed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed.

M & L for machine cut kota stone 18-20 mm thick slab for skirting, dado, riser etc over and including 10mm thick rendering in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing all as specified and directed.

Taking down cement plaster from wall of any description including terrazzo tiles, skirting/dado on brick or stone walls etc including raking out joints, hacking for key and scrubbing down with water etc.all as specified and directed.

M&L Aluminium partition frame work anodized powder coated frame of size 62.5 mm x 37 mm x 2.5 mm thick with bottom & middle rail of section 62.50 mm x 37 mm x 2.5 mm thick and styles, top rail of section 62.50 x 37 x 2.5 mm thick including jointing cleats, fixing of glazing with 5.5 thick ordinary plain glass or 5 mm aluminium composit panel including taking down old existing partition work including necessary fittings fixtures complete all as specified and directed.

S&F powder coated aluminium sliding windows three track frame with movable shutter ( sliding on minimum two PVC roller of best quality) for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick tinted glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below, and following items deemed to include- (i) Window frame :68.4x38mm X 1.15 mm thick for three tracks. (ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over (iii) Aluminium beading - 0.7mm thick (iv) Aluminium grill with Bulb height 4.5 mm square shape fixed on frame including necessary fixing arrangement like U-clip, flat Aluminium section maching with window & dia of grill as directed by Engr-in-Charge. (v) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (vi) Aluminium fittings such aluminium suitable handle with auto interlock cap with suitable size . (vii) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.

S& F powder coated aluminium grill of approved design/pattern, with approved standard section of apprature size min 75mm x75mm size and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, including powder coated Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples all complete as per requirement and direction of Engineer -in-charge

S&F 15 mm dia bib tap fancy type chromium plated with flange quarter turn incl all necessary fittings complete all as specified and directed. Model : Cera model No F1014151, Kerovit Cat Part No KB 2111004, Asian Paints Cat Part No MABC101.

S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain including jointing to waste pipe fixed in cement concrete (1:2:4), type B-1 complete all as specified and as directed.

S&F PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and as directed.

S&F PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and as directed.

S&F 110mm bore PVC bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door

S&F 75mm bore PVC bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door

M&L for 100 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and jointes including concrete bed to drain 150 mm bore NP-2 pipe, in plain Cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) including packing under, and haunching against the sides of pipes after they are laid and tested complete complete all as specified and directed.

S&F for 15mm bore galvanised steel water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors complete all as specified or as directed.

S&F for 20mm bore galvanised steel water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors complete all as specified or as directed.

S&F 15mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete all as specified or as directed.

S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified or as directed.

M&L providing cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in benching, coping, bed blocks including necessary form work, weathering slightly rounded or chamfered angles and throating, complete all as specified and directed by Engineer-in-charge.

Internal E/M & External E/M

Material and labour for point wiring with single core FRLS 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, with all conduit accessories, screws (concealed conduit wiring in walls and casing capping on ceiling or roof) including metal box suitable for modular fittings and covered with modular plate and cover of suitable size with new brass screws for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for:- (a) One light / fan/ exhaust fan point controlled by one switch.

All as Srl Item No 78 above but for One 5 pin 5 Amp switch socket out let point on an independent board.

All as Srl Item No 78 above but for One 5 pin 5 Amp socket out let point controlled by one switch on same board.

All as per item 78 here in before but for one 15 Amp 6 Pin switch socket out let independent with 2.5 Sqmm FRLS (Nominal Area) PVC unsheathed copper conductor single core multistranded incl 2.5 sq mm FRLS PVC copper conductor single core used as earth continuity conductoe complete all as specified.complete all as specified.

S & F Modular switch one way 6 A, 1 Module complete all as specified and directed by the Engr-in-Charge.

S & F Modular switch one way 16 A, 1 Module complete all as specified and directed by the Engr-in-Charge.

S & F Modular Socket 6 Amp, 2/3 Pin combined 2 Module complete all as specified and directed by the Engr-in-Charge.

S & F Modular Socket 6/16 Amp, 2/3 Pin combined 2 Module complete all as specified and directed by the Engr-in-Charge.

S & F Modular fan regulator Step up type, 120 Watt, 2 Module complete all as specified and directed by the Engr-in-Charge.

Supply and Fixing ceiling rose PVC / Poly carbonate, Isolated body, three terminal AC 230 volts complete all as specified and directed.

S&F LED mirror light fitting of 1 x 20 watt LED batten with aluminium housing with all accessories prewired suitable for wall /surface mounting complete with connection all as specified and directed.

S&F LED light fitting, high lumens housed in extruded from powder coated aluminium, 2x2 36 watt for soft diffuser lighting with and including lamp and connecting up complete with white PVC insulated and PVC sheathed round flexible three core copper conductor cable of suitable size and testing on completion all as specified and directed.

Supply & Fixing Bldg security light fitting, LED type, 25 Watt, 6000 K, pressure die cast housing with prismatic polycarbonate diffuser & indvl LEDs as light source with integrated electronic driver complete with M&L GI pipe mounting bracket of size 25/32 mm dia and 1.20 m long fixed to wall with and including nut, bolts and GI clamps of size 50 x 6 mm as required including two coats of synthetic enameled paint over a coat of primer and making connection with three core 23/.0076 rubber insulated copper cable from ceiling rose to connector of street light complete all as specified and directed.

M&L for sub main wiring with 2 single core 2.5 Sqmm (FRLS) copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 2.5 Sqmm (FRLS) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. ( Note :- Two runs of 2.5 sqmm (FRLS) and one run of 2.5 sqmm (FRLS) copper conductor and one run of PVC Conduit shall be measured as one unit length.)

Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F MCB SPN 6 to 32 Amp 240 volt complete all as specified and directed by the Engr-in-Charge.

S&F MCB single pole 6 to 32 Amp 240 Volt 'B' curve 10 KA complete all as specified and directed by the Engr-in-Charge.

Supply and fix flush sheet metal enclosure SPN DB 4 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links complete including taking down old unsv all as specified and directed.

Material & Labour for earthing complete including taking out old unsv and replace with galvanised steel earth plate 600x600x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate using 4 mm dia GI wire as earth wire electrode moulded and rivetted to earth plate at one end and connected to main switch/ control switches of buildings at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto main switch board of building including 20 dia bore GI pipe 'light grade' as water pipe from earth chamber and including excavation and earth work, PCC 1:3:6 type C1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced complete all as specified and directed.

Supply and laying & testing UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 4 sq mm, 2 core complete all as specified and directed.

M&L for sand cushioning laid in trenches for laying of LT UG cables complete all as specified and directed.

M&L Modular bricks common burnt clay building bricks, sub-class ‘B’ designation-75 for LT UG cable protection complete all as specified and directed.

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

Supply and install hi wall split units indoor/ outdoor complete with cordless remote control unit and with cooling and heating function electric driven, single phase of capacity of 1.5 TR, 3 star rated complete all as specified and directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 3.0 KVA complete all as specified and directed.

S & F Room Window Type Air Conditioner electric driven (single phase) cooling capacity 4500 Kcal per hour (1.5 Ton) 3 star rated complete all as specified and directed.

M&L for sub main wiring with 2 single core 2.5 Sqmm (FRLS) copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 4.0 Sqmm (FRLS) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. ( Note :- Two runs of 4.0 sqmm (FRLS) and one run of 4.0 sqmm (FRLS) copper conductor and one run of PVC Conduit shall be measured as one unit length.)

S&F, miniature circuit breakers, type curve ‘B’ , 10 KA, SP, 6 to 32 Amps complete all as specified and directed.

S & F wall fans complete with blades, with 3 speed regulator, accessories, 230 V, 450mm sweep, Min air delivery 210 CFM with service value 6.00 BEE 5 star rated complete all as specified and directed.

S &F sheet metal enclouser with socket plug top and MCBs Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps complete all as specified and directed.

Supply and laying & testing UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm, 4 core complete all as specified and directed.

Notes:- Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender.

Mohit Enterprises (BID ID -3507946)

Builders Harpal (BID ID -3502102)