Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.9 LAccepted-AOC MES COLONY KUMBHIGRAM AIRPORT CACHAR ASSAM 788109 | KUMBHIGRAM | CACHAR | ASSAM | 788109 | L1 | Accepted-AOC L1 | |
| 2 | L2₹18.2 L+₹29,284.28 (1.63%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹20.0 L+₹2.0 L (11.2%)Rejected-Finance | L3 | Rejected-Finance L3 | |
| 4 | L4₹20.3 L+₹2.3 L (12.8%)Rejected-Finance | L4 | Rejected-Finance L4 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
17 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I AF Kumbhirgram
AGE I AF Kumbhirgram Military Engineer Services PO Kumbhirgram Assam Pin 788109 Tele 03841282376
COMPREHENSIVE MAINTENANCE OF CERTAIN MD ACCN IN DOMESTIC AREA AT AFS KUMBHIRGRAM
2023_MES_573798_2
8436/2022-23/E8
Open Tender
Civil Works
Item Rate
180 days
AF STATION KUMBHIRGRAM
As per NIT
8 documents required · 8 mandatory
₹500
Yes
AGE I AF Kumbhirgram
₹40,000
Yes
3 Apr 2023
28 Feb 2023
20 Mar 2023
28 Feb 2023
17 Mar 2023
3 Mar 2023
Amount
Taking down chowkats or frames exceeding 1.5 SQM but not exceeding 4 SQM in each (without taking off shutters from the frame) complete all as specified and directed.
Taking down chowkats or frames exceeding 1.5 SQM but not exceeding 4 SQM in each complete all as specified and directed.
Taking down shutter of any description exc 1 sqm but not exc 2 sqm each complete all as specified and directed.
Refixing in the same opening shutters of ay description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.
S&F 30mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge with sash bars etc with plain, chamfered or rounded, mitred beads for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (b) complete all as specified and directed.
M&L for MS framed work such as grills, grating etc with ends of bars shouldered and or riveted or forged in to spikes, framed guard bars, barred iron doors, ladders and similar works complete all as specified and directed.
M&L for preparation of new steel surface over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F 105mmx60mm pressed steel frame for doors with one or more rebates made out of MS sheet 1.25mm thick including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and directed.
S&F 125mmx60mm pressed steel frame for doors with one or more rebates made out of MS sheet 1.25mm thick including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and directed.
M&L for PCC (1:2:4) type B0 using 12.5 mm graded crushed stone aggregate as in bed blocks for fixing hold fast, lugs, filling hollow spaces of pressed steel door frame etc including weathering slightly rounded for chamfered angles and throating and form work complete all as specified and directed.
S&F factory made 30 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F 150mm in size aluminium handles, cast type, anodised complete all as specified and directed.
S&F 150mm long aluminium anodised barrel tower bolts 12 mm dia of extruded section complete all as specified and directed.
S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed length of bolt 250 mm complete all as specified and as directed.
S&F 100 mm butt hinges medium weight cold rolled mild steel complete all as specified and directed.
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
S&F in repair vitreous china squatting pan “Orissa pattern of size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including lime concrete bedding complete all as specified and directed.
S&F in repair PVC low level flushing cistern, white, 10 ltrs capacity, valveless, syphonic action type including all fittings and flush pipe, PVC connection pipe all as specified and directed.
Supply and fix in repair vitreous china wash down water closet pan (semi-pedestal pattern, anglo-Indian type), white, including fixing bolts, plastic seat but excluding flushing cistern and flush pipe, complete all as specified and directed.
S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed .
Taking up or down 15 mm bore GI tubing and connections including cleaning for re-fixing or removal from site complete all as directed.
S&F GI tubing 15 mm bore, medium grade with all fittings such as bends, elbows, nipples, sockets, tees, unions, short pieces etc. and fixed to walls and ceilings or laid in floors complete all as specified and directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing and making good, cutting not exc 10cm girth complete all as specified and directed.
S & F pre - painted galvalume aluminium zinc coating (AZ 150) GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws as specified and as directed.
S & F pre - painted galvalume aluminium zinc coating (AZ 150) GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in ridge fixed with self tapping screws as specified and as directed.
Dismantling of plain or corrugated steel sheeting any gauge/thickness in roof or wall covering complete all as specified and directed.
S&F plain galvanized steel sheeting 0.63mm thick ( 275 gram galvanization per Sqm) as in ridges, hips and valley gutters complete all as specified and directed.
S&F Corrugated galvanized steel sheeting 0.63mm thick ( 275 gram galvanization per Sqm) with two corrugation side laps and fixed with L type or J type hooks or cranked hook bolts and washers in roof/wall etc complete all as specified and directed.
Taking down tarfelt with tiles and cement plaster from roof surfaces and lowering and removing the same to a distance exc. 50 m and n. exc. 100m including roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust complete all as directed.
M&L for 15 mm thick screed bed or bedding layers in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces for laying APP based polymeric membrane, finished even and smooth without using extra cement complete all as specified and as directed. (NOTE : Polymeric membrane shall be measured and paid separately under relevant item ).
M&L for PCC (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in roof kerbs, slightly rounded or chamfered on edges, mixed with water proofing compound @ 3% by weight of cement or as per manufacturer instructions finished even and smooth on exposed concrete surface without using extra cement complete all as specified and directed. (Note: Water proofing compound shall be measured and paid perarately under relevant item as supply only).
Supply only integral water proofing compound ISI marked complete all as specified and directed.
M&L for water proofing treatrment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top :- (a) Applying bitumenous primer @ 0.25 ltrs per Sqm over plastered surfaces of roof incl parapet surface. (Note :- Bituminuous primer shall be "TANK MASTIC" manufactured by "EMUFALTE" manufactured by M/s Texsa India Ltd./STP) (b) Over the priming coat laying one layer APP based polymembric membrane of approved manufacturer 3 mm thick weight not less than 3.6 Kgs per Sqm reinforced with non woven polyester febric weight not less than 150 gms per Sqm. Polymeric membrane shall be taken to a height of 60cm (min) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (Note :- (i) Laying APP bassed polymenic membrane shall be done torch on methed or as per manufacturer's instructions. (ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturer's instruction. (iii) APP bassed polymeric membrane shall be "MOPLY FP 3MM" manufactured by M/S Texsa India Limited/STP/Sika India Pvt. Ltd. (iv) Applying two coats of Aluminium paint over APP membrane.)
Dismantling floor, hearth and wall tiling including cement mortar bedding (but excluding backing), removing rubbish off the premises complete all as specified and directed.
M&L for glazed ceramic coloured/printed tiles of size 350x250/450X350- 7 mm thick as in vertical surfaces such as skirting, dados 10 mm thick screed in cement mortar (1: 4) complete all as specified and directed.
M&L for non skid ceramic joint free coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 15 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.
M&L for preparation of old decorated plastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc including cornices and pilasters etc and applying one coat of oil emulsion distemper complete all as specified and directed.
M&L for complete removal of existing treatment on walls including brooming down , applying two coats of oil emulsion distemper over and including one coat of cement primer and 1mm thick wall care putty complete all as specified and directed .
M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
S&F 110mm dia PVC (SWR) pipes, Type 'A' single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.
S&F 110 mm dia PVC (SWR) bends with access door of any radius complete all as specified and directed.
S&F 110 mm dia PVC (SWR) branch piece, single (single Y) eqial or unequal complete all as specified and directed.
S&F 110 mm dia PVC (SWR) junction single, (single T) equal or unequal complete all as specified and directed.
Cutting holes into or through brick walls built in cement mortar of area not exc 150 sq. cm and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required, complete all as specified and directed .
Demolition of brick/stone massonry work built in cement mortar as in wall including all quoins, arches, pillars etc complete all as specified and directed.
M&L for half brick thick wall with old size, sub class ‘B’ bricks (locally available best quality) straight or curved on plan to any radius built in cement mortar (1:4) complete all as specified and directed.
M&L for brick work with old size, sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
M&L for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick in two layers in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) including mixing of WPC (LW+)@200ml/50kg of cement in second layercomplete all as specified and directed. Note:-Liquid water proofing compound (LW+)shall be measured and paid separately.
Supply only liquid water proofing compound(LW+) ISI marked.Make: Dr Fixit of M/s Pidilite Industries or equivalent.
M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M/S PIJUSH BHATTACHARJEE
M/S M P Sharma
M/S Goutam Chakraborty
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .