PROVN OF UNIT RATION STORE AT ASC (SUP) AND GUARD ROOM FOR MES WATER SUPPLY TANKS AT RR HILL AND CERTAIN OTHER SANCTIONED WORKS AT MASIMPUR MIL STN UNDER GE SILCHAR

Amount

PART-I (B/R WORKS) Surface dressing n.exc. 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Surface excavation n.exc 30 cm deep and averaging 15cm deep ad getting out in soft/loose soil & removal of surplus soil upto 50 mtr complete all as specified and directed.

Excavation in trenches n.exc. 1.50 m deep and 1.50 m wide and getting out in soft/loose soil complete all as specified and directed.

Earh filling under floor incl spreading and levelling in layers n exc. 25 cm thick for well ramming including watering as required complete all as specified and directed. (Earth obtaianed from excavation shall be used for filling )

Returning filling in incl watering, ramming in layers n.exc. 25cm thick in soil complete all as specified and directed.

Removing excavated surplus soil to a distance n.exc. 50m and depositing where directed at level n.exc. 1.50m above the starting point complete all as specified and directed.

M&L for Hardcore of broken stone of gauge n exc 63mm deposited spread and levelled in layers n exc 15cm thick watered and rammed to a true surface complete all as specified and directed.

M&L sand filling under floors or in foundation including watering levelling and consoliation as directed complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40mm stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40mm stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Use and waste Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished flat surfaces of concrete complete all as specified and directed.

Use and waste of Form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete complete all as specified and directed.

Use and waste of form work to chullah hoods, chajjas, shelves troughs and similar items including edges, for rough finished flat surfaces of concrete complete all as specified and directed.

Use and waste of Form work to sides and soffits of floor or roof beams, beam hunching, girders, lintels, cantilevers, shelves including supports, etc for rough finished flat surfaces of concrete complete all as specified and directed.

Use and waste of Form work to Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and directed.

Use and waste ofFormwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs exc 10 cm but n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work e for rough finished flat surfaces of concrete complete all as specified and directed.

Use and waste ofFormwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs exc 5 cm but n exc 10 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work e for rough finished flat surfaces of concrete complete all as specified and directed.

Material and labour for providing Reinforced Cement Concrete M-25 (Design mix ) using 20 mm graded aggregate as in foundation including rafts, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and directed.

Material and labour for providing Reinforced Cement Concrete M-25 (Design mix ) using 20 mm graded aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed.

Material and labour for providing Reinforced Cement Concrete M-25 (Design mix ) using 20 mm graded aggregate as in beams, cantilever, lintels over 1.5 m complete all as specified and directed.

Material and labour for providing Reinforced Cement Concrete M-25 (Design mix ) using 20 mm graded aggregate as in Chajja etc complete all as specified and directed.

Material and labour for providing Reinforced Cement Concrete M-25 (Design mix ) using 20 mm graded aggregate as in beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and labour for 10mm dia and over TMT bars, cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

All as per item No. 23 above but 6mm to 8mm dia

All as per item No. 23 above but mild steel bar 5 mm and over up to 10 mm dia as in stirrups, spacers and binders complete all as specified and directed.

M&L Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for half brick work with sub class 'B' bricks straight or curved on plan to radius built in cement mortar 1:4 complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type C2 (40mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement laid shall be alternate panels and joints filled with bituminous 1 part and 3 part of sand complete all as specified and directed.

Material and labour for 40 mm thick Damp proof course to horizontal or vertical surfaces In cement concrete in PCC 1:2:4, type B-0 including necessary formwork incl applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square re and blinding with clean dry sand @ 0.05 cum / sqm complete all as specified and directed.

Material and labour for Polythene film, 50 micron thick, laid on floor complete all as specified and directed.

Material and labour for 75mm thick Plain Cement concrete type C-2, PCC (1:3:6) (40mm graded aggregate) as in subbase of floor (path) complete all as specified and directed.

M&L for cement concrete 1:3:6 type C2 (40mm graded aggregate) in surface channel and drain including formwork, complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

Material and labour for 100mm thick Plain Cement concrete type D2 1:4:8 (40mm graded aggregate) for base in floor fair and even complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7mm thick area exc 0.06 sqm but not exc 0.11 sqm each in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement te match including 15mm thick screed bed of CM 1:6 incl over & incl neat cement slurry @ 3KG/sqm complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7mm thick area exc 0.11 sqm but not exc 0.18 sqm each in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement te match including 15mm thick screed bed of CM 1:6 complete all as specified and directed.

All as per item No. 38 but as in skirting, dados and risers to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat of rendering with CM 1:4 complete all as specified and directed.

Material and labour for 40 mm thick Plain Cement concrete type B-1 1:2:4 (20mm graded aggregate) as in floor finished even & fair complete all as specified and directed.

M&L, machine cut kota stone slab flooring 20-25 mm thick jointed in grey cement slurry mixed with pigment to match the shade of the slab as in flooring incl rubbing and mirror finish polishing completeover & including 20mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L, machine cut kota stone slab flooring 20-25 mm thick jointed in grey cement slurry mixed with pigment to match the shade of the slab as in skirting dado incl rubbing and mirror finish polishing complete over & including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

Material and labour for reflective type rubber moulded chequered cement concrete tiles 300x300x25mm etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match the tile complete all as specified and directed.

M&L machine pressed precast concrete interlocking paver block (rubber moulded)any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade with proper jointing, pointed with grey cement and pigment complete all as specified and directed.

S&F compound girders and lattice girders and staging for water tanks and the like including capes, bases, splices etc built up from two or more beam or channel section or angles with plates incl att lattice bars, stiffeners, gusset plates etc complete all as specified ad directed.

S&F Steel tubular trusess, purlins, rafters including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS 1161-1998 grade St-240 complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinay and counter sunk) forming holes, without any attachment of Fe 410W (Gde-E -250) Quality 'A' complete all as specified and directed.

S&F Mild steel screw bolt (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends each exc 5cm but n.exc 10cm long dia 11 to 15mm necessary fitting complete all as specified and directed.

S&F Prepainted galvalume aluminium zinc coating steel based corrugated steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof coverings/ claddings to wall, fixed with self tapping screws complete all as specified and directed.

S&F Prepainted galvalume aluminium zinc coating steel based plain steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof coverings/ claddings to wall, fixed with self tapping screws complete all as specified and directed.

S&F Steel windows with side hung shutters including box type hinges with steel handles, 2 Nos steel tower bolts 100mm long peg stay complete with glazing bars, dovetailed or welded, including locking arrangements complete all as specified and directed.

All as per item No. 51 above but without glazing bars

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements, complete all as specified and directed.

S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and or riveted, or forged in to spikes; framed guard bars; similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

M&L Pressed steel frame for door with one or more rebates including necessary lugs, fixing lugs hinges, lock strike plate etc of size 125X60 mm and made of 1.25mm thick MS sheet, complete all as specified and directed.

S & F Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010) complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified and directed.

M&L Flush shutters, 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides including 6/8mm thick polished teak wood lipping around the door properly fixed complete all as specified and directed.

M&L 2nd class hard wood, 35 mm thick, glazed and skeleton shutter, divided into square, with plain, chamfered or rounded mitered and , any number of panels, prepared to receive glass, gauge etc. edges of frames chamfered or round size of numbers of shutters as specifed in SSR Part-I section clause 8.24 (a) complete all as specified and directed.

M&L for 10mm thick cement plaster in CM 1:6 on brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5mm thick cement plaster in CM 1:3 on concrete surfaces in ceiling finished fair and even complete all as specified and directed.

M&L for Rendering 15mm thick in two layers [base layer 10mm in 1: 4 & finishing layer 5mm thick in cement mortar (1:4)] using liquid water proofing compound in IInd layer only on brick work or concrete surfaces of wall, surfaces finished even and smooth using extra cement complete all as specified & directed. Note : WPC shall be measured and paid separately

Supply only WPC complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putting square n. exc 0.5 sqm in each pane complete all as specified and directed.

M&L Plain cement concrete 1:3:6 type C-0, (using 12.50 mm graded stone aggregate) as in back filling of pressed steel door frame & fixing hold fasts including necessary form work complete all as specified and directed.

M&L Plain cement concrete 1:2:4 type B-1, (using 20 mm graded stone aggregate) as in bed blocks, coping, cills, steps, kneelers, bed plates, apex stones kerbs benching and similar work including necessary form work complete all as specified and directed.

S&F 110mm bore PVC pipes single socketed, in any length with rubber ring joints, las in weep holes complete all as specified and directed.

S&F PVC (SWR) Pipe 110 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

S&F PVC (SWR) Pipe 75 mm bore single socketed in any length with rubber ring joints, fixed to walls with suitable size of clamps & nuts bolt complete all as specified and directed.

M&L MS work as in hold fasts, bands, wind ties straps, wall ties, plain angle cleats and similar articles including welding and all necessary labour conforming to Fe 250 Gde-E-165 complete all as specified and directed.

M&L 300 mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F door stopper of aluminium alloy body and tongue, anodised with hard drawn steel springs, fixed to door with over all length 150mm with rubber bush complete all as specified and directed.

S&F Galvanized mild steel wire cloth 0.46 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staple complete all as specified and directed.

S&F Mild steel 300mm size ordinary rat tail rod pattern springs including roller and roller plate complete including necessary fitting complete all as specified and directed.

S&F Aluminium handle cast type anodized of size 125mm complete all as specified and directed.

S&F Aluminium handle cast type anodized of size 150 mm complete all as specified and directed.

S&F Aluminium anodized barrel tower bolt of extruded section and fixed complete of size 200 mm long complete all as specified and directed.

S&F 20 mm bore stainless steel curtain rods with brackets, stops, roller etc. incl CP side end cap fancy type complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel, 100 mm size complete all as specified and directed.

S&F Butt hinges, stainless steel with steel screws 100 mm size complete all as specified and directed.

M&L for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement designer Board (E-Board Classic) in a grid of GI system duly suspended with 4mm dia GI bar hanger fixed with steel dash fasteners or iron purline from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts, sprinkler, smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid and painted with two coats of acrylic emulsion paint of approved shed /make over a coat of cement primer before installing it on the grid complete all as specified and directed.

Supply, lay and fix 25 mm bore galvanized iron water tubing medium grade including all fittings laid in trenches complete all as specified and directed.

Supply, lay and fix 20 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors or laid in trenches complete all as specified and directed.

Supply, lay and fix 15 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F gun metal globe, or gate valves of size 25mm bore with iron wheel head, screwed at both end for iron pipe and fixed complete all as specified and directed.

Supply and fix vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection & fixed in PCC complete all as specified and directed.

S&F PVC valve less syphonic action type of capacity 10 ltrs, low level flushing cistern, white with inlet, ball valve float and handle including brackets complete all as specified and directed.

Supply and fix vitreous china wash basin, white flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.

Supply and fix 15 mm bore bib taps,chromium plated, cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fix 15 mm bore pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe complete all as specified and directed.

Supply & fix soap dish, any type fixed to plugs with chromium plated brass screws complete all as specified and directed.

M&L for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Supply and fix tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated including brackets complete all as specified & directed

Supply and fix, stop valve fancy type, cast copper alloy, chromium plated, screwed down high pressure, with crutch or butterfly handles for 20 mm bore pipe or for unions complete all as specified & directed.

S&F 32 mm bore Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

S&F PVC connections 15mm dia & 450mm long with PTMT nuts complete all as specified and directed.

Cutting into existing manholes for connecting new drains of 150mm bore, making good to pipe & rending, dutting out existing benching for & forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed.

Preparation of new or untreated surfaces of wood or wood based surfaces of any description exc.10 cm. in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Preparation of new or untreated steel surface of any description exc. 10 cm. in width or girth and applying two coats of synthetic enamel paints, over a coat of red oxide primer, complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

Material and labour for complete two coats of exterior wheather coats (as per manufacturers instruction) (Apex Ultima) of M/s Asian make or equivalent of M/s Berger/ M/s Shalimar/ M/s Neroloc over & incl one coat of primer complete all as specified and directed.

M&L preparation and applying two coats of oil emulsion (distemper) over one coat of primer on new plastered surfaces of walls over & incl a coat of wall putty 3 mm thick including preparation of new surfaces complete all as specified and directed.

PART-II (E/M WORKS) M&L for Point wiring using FRLSH PVC insulated unsheathed multi stranded copper conductor cable 1.5 sqmm including 1.5 Sqmm FRLSH PVC insulated unsheathed multi stranded copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box , PVC box of suitable size etc, connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble of pin/u type etc for one light/fan/bell point complete all as specified and directed.

All as per item No. 105 above but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

All as per item No. 105 above but for One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

M&L for Point wiring using FRLSH PVC insulated unsheathed multi stranded copper conductor cable 2.5 sqmm including 2.5 Sqmm FRLSH PVC insulated unsheathed multi stranded copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box , PVC box of suitable size etc, connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble of pin/u type etc for one 15 amp socket/ switch socket complete all as specified and directed.

Supply and fix ceiling rose surface bakelite with three terminals complete all as specified and directed.

Supply and fix switch piano flush type button single pole one way 5 Amps complete all as specified and directed.

Supply and fix socket outlet 3/5 pin 5 Amps flush type complete all as specified and directed.

Supply and fix switch socket outlet 3 pin 5 amp and 3 pin 15 Amps 2 in 1 universal plate complete all as specified and directed.

S & F ceiling fan regulator socketed, step type, flush type heavy duty suitable to work on 230 volts AC supply complete all as specified and directed.

Supply and fix lamp Angular holder insulated body with back plate suitable for batten fittings complete all as specified and directed.

Supply and fix wall mounted LED batten box type 22 watt with LED tube rod, 22 watt prewired complete all as specified and directed. Make. Havells, Product Code : REGALBATTENT8UPTO1X22WDSBSWH & CRYSTAL1213T8DSTL20WLED865SGLASS or equivalent make of Philips/Bajaj/Wipro/Syska LED/Crompton Greaves/M/s Surya Roshni Limited /M/s Jaquar & Company Pvt Ltd

Supply and fix bulk head fitting LED type comprises of pressure die cast housing acrylic diffuser and frame complete of 10 watt complete all as specified and directed. Make:- Havells Cat No. RUGBYNEONFT10WLED760SSYMBOPC of Havells or equivalent to Bajaj/Philips/ Wipro/ Syska LED/ M/S Surya Roshni Limited/M/S Jaquar & Company Pvt Ltd/Crompton Greaves

Supply and fix street/bldg security light LED luminaire 20 watt IP 66 LED lamp, driver etc, with all accessories complete all as specified and directed. Make:- Havells type 20W LED, Cat No. ENDURAPEARLSL20WLED757SASYTOPCMP or equivalent make of Philips/Bajaj/Wipro/Syska LED/Crompton Greaves/M/s Surya Roshni Limited /M/s Jaquar & Company Pvt Ltd

Supply and fix ceiling fan complete with all accessories 230 V, 1200 mm sweep. BEE 5 star rated with regulator complete all as specified and directed. Make:- Usha Model : Energia 5 Star or equivalent make of Havells/Crompton Greaves/ Khaitan/Bajaj/Orient

S & F plastic body exhaust fan, AC single phase, 240 V of size 250 mm sweep with louvers including necessary connection and flexible copper cable from ceiling rose complete all as specified and directed. Make:- Bajaj Maxima DX 5 blade ( 250 mm) or equivalent in Crompton Greaves/ Khaitan/Havells/Orient

Supply and fix Geyser (water storage heater) of capacity 25 ltr, 5 star rating with 2KW heating element including fixing on the wall with 12 mm dia x 100 mm long GI fastner, nut and bolt by grouting at required position including testing on completion including making all necessary water supply and electric supply connections to water Geyser from existing point and also inclusive of making good to distrubed surface with existing surface complete all as specified and directed. Make :- Havells Cat Part No PURO TURBO 25 L or equivalent in Bajaj/ Crompton Greaves/ Venus

Supply and fix sheet metal enclosure powder coated single phase DB SPN for fixing of MCBs, 8 ways double door with bus bar including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed.

Supply and fix sheet metal enclosure powder coated single phase DB SPN for fixing of MCBs, 4 ways double door with bus bar including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed.

Supply and fix MCB SP 240 volts, 50 Hz capacity 6-32 Amps complete all as specified and directed.

Supply and fix MCB SPN 240 volts, 50 Hz of capacity 40 Amps complete all as specified and directed.

Material and labour for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth lead wire 4 mm dia by means of galvanized iron or steel bolts, nuts, check nuts and washers, and connected to equipments as directed, including funnel with GI medium grade watering pipe 20 mm bore &15 mm bore GI light grade protection pipe , wire mesh, charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with concrete pit in PCC 1:3:6 type C1, 50 mm thick pre cast RCC 1:2:4 type B1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar, GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance not exceeding 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES Schedule 2009, Part-I complete all as specified and directed.

Supply and laying connecting and testing XLPE insulated PVC sheathed armoured LT electric power UG cable (heavy duty with stranded aluminium conductor) of size 25 sqmm 3.5 core,1100 volts (Earthed) grade, conforming to IS 7098 (Part-II) laid thorught duct/pipe in trenches etc with cable glands & suitable size of aluminium lugs complete all as specified and directed.

Supply and laying connecting and testing XLPE insulated PVC sheathed armoured LT electric power UG cable (heavy duty with stranded aluminium conductor) of size 16 sqmm 4 core,1100 volts (Earthed) grade, conforming to IS 7098 (Part-II) laid thorught duct/pipe in trenches etc with cable glands & suitable size of aluminium lugs complete all as specified and directed.

Supply and spread dry sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. Note : Thickness of sand cushion after punning down will be measured and paid.

Material and labour for laying of bricks locally available sub-class 'B' brick (old size) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the directon of cable complete all as specified and directed.

Supply and laying GI tube light grade 40mm bore with fitting laid in trenches of for road crossing for protection of LT underground cables complete all as specified and directed.

SURANA CORPORATION

M/S TAPAN KUMAR RAY