Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹19.2 Cr
EMD Value
₹19.2 L
Closing Date
3 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Superintending Engineer, Project Implementation Unit, Health & Family Welfare Department.
Emergency service at Sub-District Hospitals by augmenting the existing number of 10 beds hospital and New Construction of Staff Quartes at SDH Rajula, Dist. Amreli.
363618
2026-27/110/03
Open
Civil Works
Works
Gandhinagar
1 document required · 1 mandatory
₹18,000
PIU-General Fund A/c 11-114
₹19.2 L
5 Nov 2026
5 Nov 2026
5 Nov 2026
3 Dec 2026
5 Nov 2026
120 days
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
1 1775.74 Excavation for foundation upto 1.5 m depth including sorting out and stacking of 157.16 Rupees One Hundred Cmt
useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Fifty Seven And Paise
Dance & hard soil Sixteen Only
2 1046.11 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out 287.21 Rupees Two Hundred Cmt
and stacking of useful materials and disposing off the excavated stuff upto 50 Eighty Seven And Paise
Meter lead.(A) Hard murrum Twenty One Only
3 176.79 Providing and laying rubble for appron (each stone weighting not less than 1067.08 Rupees One Thousand Cmt
40Kg.) including and packing and filing in the interestices with quarry-spalls. Sixty Seven And Paise
4 183.40 Providing and laying cement concrete 1:2:4 (1-Cement : 2- Coarse sand : 4- 3805.29 Rupees Three Thousand Cmt
graded stone aggregates 20 mm nominal size) and curing complete excluding Eight Hundred Five And
cost of formwork in (A) Foundation and Plinth Paise Twenty Nine Only
5 205.22 Providing and laying cement concrete 1:3:6 (1 Cement :3-coarse sand :6-hand 3095.25 Rupees Three Thousand Cmt
broken stone aggregates 40 mmnominal size) and curing complete excluding Ninety Five And Paise
cost of formwork in (A)Foundation and Plinth Twenty Five Only
6 529.55 Providing & laying controlled cement concrete M - 300 RCC work with curing etc. 4836.89 Rupees Four Thousand Cmt
complete including the cost of form work but excluding the cost of Eight Hundred Thirty Six
reinforcement for R.C.C. Work in Raft /strip /Base foundation with all lead and And Paise Eighty Nine
lift as directed by engineer in charge. Raft /strip /Base foundation Only
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
7 19.15 Providing & laying controlled cement concrete M - 300 RCC work with curing etc. 7108.38 Rupees Seven Thousand Cmt
complete including the cost of form work but excluding the cost of One Hundred Eight And
reinforcement for R.C.C. Work in column up to plinth level with all lead and lift Paise Thirty Eight Only
as directed by engineer in charge. R.C.C column up to plinth level
8 1930.69 Filling available excavated earth (excluding rock) in trenches. plinth, sides of 136.92 Rupees One Hundred Cmt
foundations etc. in layers not exceeding 20cm. In depth consolidating each Thirty Six And Paise
disposited layer by ramming and watering. Ninety Two Only
9 74.65 Filling in plinth with sand under floors including watering ramming, 481.80 Rupees Four Hundred Cmt
consolidating and dressing complete Eighty One And Paise
10 136.80 Filling in foundation and plinth with murrum or selected soil in layers of 20cm. 301.78 Rupees Three Hundred Cmt
thickness including watering, ramming and consolidating etc. complete. One And Paise Seventy
11 108.98 Providing and laying controlled cement concrete M:300 RCC and curing 5995.11 Rupees Five Thousand Cmt
complete including the cost of form work but excluding the reinforcement for Nine Hundred Ninety
reinforced concrete work in tie beam , ground beam with all lead and lift as Five And Paise Eleven
directed by engineer in charge. R.C.C tie beam , ground beam Only
12 54.49 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. 5304.52 Rupees Five Thousand Cmt
complete including the cost of form work but excluding the cost of Three Hundred Four And
reinforcement for R.C.C. Work in wall at ground floor with all lead and lift as Paise Fifty Two Only
directed by engineer in charge. R.C.C Wall at ground floor
13 14.48 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. 5346.11 Rupees Five Thousand Cmt
complete including the cost of form work but excluding the cost of Three Hundred Forty Six
reinforcement for R.C.C. Work in wall at 1st floor with all lead and lift as And Paise Eleven Only
directed by engineer in charge. R.C.C Wall at 1st floor
14 14.45 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. 5387.70 Rupees Five Thousand Cmt
complete including the cost of form work but excluding the cost of Three Hundred Eighty
reinforcement for R.C.C. Work in wall at 2nd floor with all lead and lift as Seven And Paise Seventy
directed by engineer in charge. R.C.C Wall at 2nd floor Only
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
15 14.45 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. 5429.30 Rupees Five Thousand Cmt
complete including the cost of form work but excluding the cost of Four Hundred Twenty
reinforcement for R.C.C. Work in wall at 3rd floor with all lead and lift as Nine And Paise Thirty
directed by engineer in charge. R.C.C Wall at 3rd floor Only
16 18.84 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. 5470.89 Rupees Five Thousand Cmt
complete including the cost of form work but excluding the cost of Four Hundred Seventy
reinforcement for R.C.C. Work in wall at 4th floor with all lead and lift as And Paise Eighty Nine
directed by engineer in charge. R.C.C Wall at 4th floor Only
17 6.67 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. 5512.48 Rupees Five Thousand Cmt
complete including the cost of form work but excluding the cost of Five Hundred Twelve
reinforcement for R.C.C. Work in wall at 5th floor with all lead and lift as And Paise Forty Eight
directed by engineer in charge. R.C.C Wall at 5th floor Only
18 6.67 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. 5554.07 Rupees Five Thousand Cmt
complete including the cost of form work but excluding the cost of Five Hundred Fifty Four
reinforcement for R.C.C. Work in wall at 6th floor with all lead and lift as And Paise Seven Only
directed by engineer in charge. R.C.C Wall at 6th floor
19 10.48 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. 5595.66 Rupees Five Thousand Cmt
complete including the cost of form work but excluding the cost of Five Hundred Ninety Five
reinforcement for R.C.C. Work in wall at stair cabin with all lead and lift as And Paise Sixty Six Only
directed by engineer in charge. R.C.C Wall at stair cabin
20 63.73 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. 7308.36 Rupees Seven Thousand Cmt
complete including the cost of form work but excluding the cost of Three Hundred Eight
reinforcement for R.C.C. Work in column with any lead and lift at ground And Paise Thirty Six Only
21 65.22 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. 7349.95 Rupees Seven Thousand Cmt
complete including the cost of form work but excluding the cost of Three Hundred Forty
reinforcement for R.C.C. Work in column with any lead and lift R.C.C. Column Nine And Paise Ninety
at 1st floor Five Only
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
22 65.22 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. 7391.54 Rupees Seven Thousand Cmt
complete including the cost of form work but excluding the cost of Three Hundred Ninety
reinforcement for R.C.C. Work in column with any lead and lift R.C.C. Column One And Paise Fifty Four
at 2nd floor Only
23 65.21 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. 7433.14 Rupees Seven Thousand Cmt
complete including the cost of form work but excluding the cost of Four Hundred Thirty
reinforcement for R.C.C. Work in column with any lead and lift R.C.C. Column Three And Paise
at 3rd floor Fourteen Only
24 36.59 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. 7474.73 Rupees Seven Thousand Cmt
complete including the cost of form work but excluding the cost of Four Hundred Seventy
reinforcement for R.C.C. Work in column with any lead and lift R.C.C. Column Four And Paise Seventy
at 4th floor Three Only
25 31.19 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. 7516.32 Rupees Seven Thousand Cmt
complete including the cost of form work but excluding the cost of Five Hundred Sixteen
reinforcement for R.C.C. Work in column with any lead and lift R.C.C column And Paise Thirty Two
at 5th floor Only
26 31.19 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. 7557.91 Rupees Seven Thousand Cmt
complete including the cost of form work but excluding the cost of Five Hundred Fifty Seven
reinforcement for R.C.C. Work in column with any lead and lift R.C.C. Column And Paise Ninety One
at 6th floor Only
27 4.86 Providing & laying controlled cement concrete M - 250 RCC work with curing etc. 7599.50 Rupees Seven Thousand Cmt
complete including the cost of form work but excluding the cost of Five Hundred Ninety
reinforcement for R.C.C. Work in column with any lead and lift at stair cabin Nine And Paise Fifty Only
28 19.60 Providing and laying controlled cement concrete M:250 RCC and curing 4856.08 Rupees Four Thousand Cmt
complete including the cost of form work but excluding the reinforcement for Eight Hundred Fifty Six
reinforced concrete work in coping/RCC bend with all lead and lift as directed And Paise Eight Only
by engineer in charge. R.C.C coping/RCC bend
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
29 78.98 Brick work using common burnt clay building bricks having crushing strength not 4245.09 Rupees Four Thousand Cmt
less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Two Hundred Forty Five
Cement : 5 -fine sand)(B) Conventional And Paise Nine Only
30 42.13 Providing and laying autoclave aerated concrete blocks masonry as per drawing 4598.92 Rupees Four Thousand Cmt
(Thickness above 150 to 350 mm) in single or multiple layers in cement mortar Five Hundred Ninety
1:5 (1 cement : 5 fine sand). Crushing strength of aerated concrete block/ bats Eight And Paise Ninety
shall not be less than 40 KG/sqcm, minimum density in oven dry condition Two Only
between 651 to 750 KG/CUM, thermal conductivity shall not exceed
W/make, fire resistant 4 hours, in true line level and plumb and cleaning the
surface with necessary tool tackles etc. at all floors, any heights, all depths, any
levels (in foundation and superstructure) and all places including curing,
scaffolding, racking / flush jointing etc complete, as per drawing / specification
and approved by architect and as directed by Engineer In charge for all civil,
plumbing, electrical & infrastructure works. at Ground floor level
31 125.93 Providing and laying autoclave aerated concrete blocks masonry as per drawing 4641.35 Rupees Four Thousand Cmt
(Thickness above 150 to 350 mm) in single or multiple layers in cement mortar Six Hundred Forty One
1:5 (1 cement : 5 fine sand). Crushing strength of aerated concrete block/ bats And Paise Thirty Five
shall not be less than 40 KG/sqcm, minimum density in oven dry condition Only
between 651 to 750 KG/CUM, thermal conductivity shall not exceed 0.3 W/m.k,
fire resistant 4 hours, in true line level and plumb and cleaning the surface with
necessary tool tackles etc. at all floors, any heights, all depths, any levels (in
foundation and superstructure) and all places including curing, scaffolding,
racking / flush jointing etc complete, as per drawing / specification and
approved by architect and as directed by Engineer In charge for all civil,
plumbing, electrical & infrastructure works. at 1st floor level
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
32 125.91 Providing and laying autoclave aerated concrete blocks masonry as per drawing 4683.78 Rupees Four Thousand Cmt
(Thickness above 150 to 350 mm) in single or multiple layers in cement mortar Six Hundred Eighty Three
1:5 (1 cement : 5 fine sand). Crushing strength of aerated concrete block/ bats And Paise Seventy Eight
shall not be less than 40 KG/sqcm, minimum density in oven dry condition Only
between 651 to 750 KG/CUM, thermal conductivity shall not exceed 0.3 W/m.k,
fire resistant 4 hours, in true line level and plumb and cleaning the surface with
necessary tool tackles etc. at all floors, any heights, all depths, any levels (in
foundation and superstructure) and all places including curing, scaffolding,
racking / flush jointing etc complete, as per drawing / specification and
approved by architect and as directed by Engineer In charge for all civil,
plumbing, electrical & infrastructure works. at 2nd floor level
33 125.91 Providing and laying autoclave aerated concrete blocks masonry as per drawing 4726.21 Rupees Four Thousand Cmt
(Thickness above 150 to 350 mm) in single or multiple layers in cement mortar Seven Hundred Twenty
1:5 (1 cement : 5 fine sand). Crushing strength of aerated concrete block/ bats Six And Paise Twenty
shall not be less than 40 KG/sqcm, minimum density in oven dry condition One Only
between 651 to 750 KG/CUM, thermal conductivity shall not exceed 0.3 W/m.k,
fire resistant 4 hours, in true line level and plumb and cleaning the surface with
necessary tool tackles etc. at all floors, any heights, all depths, any levels (in
foundation and superstructure) and all places including curing, scaffolding,
racking / flush jointing etc complete, as per drawing / specification and
approved by architect and as directed by Engineer In charge for all civil,
plumbing, electrical & infrastructure works. at 3rd floor level
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
34 97.99 Providing and laying autoclave aerated concrete blocks masonry as per drawing 4768.64 Rupees Four Thousand Cmt
(Thickness above 150 to 350 mm) in single or multiple layers in cement mortar Seven Hundred Sixty
1:5 (1 cement : 5 fine sand). Crushing strength of aerated concrete block/ bats Eight And Paise Sixty
shall not be less than 40 KG/sqcm, minimum density in oven dry condition Four Only
between 651 to 750 KG/CUM, thermal conductivity shall not exceed 0.3 W/m.k,
fire resistant 4 hours, in true line level and plumb and cleaning the surface with
necessary tool tackles etc. at all floors, any heights, all depths, any levels (in
foundation and superstructure) and all places including curing, scaffolding,
racking / flush jointing etc complete, as per drawing / specification and
approved by architect and as directed by Engineer In charge for all civil,
plumbing, electrical & infrastructure works. at 4th floor level
35 46.11 Providing and laying autoclave aerated concrete blocks masonry as per drawing 4811.07 Rupees Four Thousand Cmt
(Thickness above 150 to 350 mm) in single or multiple layers in cement mortar Eight Hundred Eleven
1:5 (1 cement : 5 fine sand). Crushing strength of aerated concrete block/ bats And Paise Seven Only
shall not be less than 40 KG/sqcm, minimum density in oven dry condition
between 651 to 750 KG/CUM, thermal conductivity shall not exceed 0.3 W/m.k,
fire resistant 4 hours, in true line level and plumb and cleaning the surface with
necessary tool tackles etc. at all floors, any heights, all depths, any levels (in
foundation and superstructure) and all places including curing, scaffolding,
racking / flush jointing etc complete, as per drawing / specification and
approved by architect and as directed by Engineer In charge for all civil,
plumbing, electrical & infrastructure works. at 5th floor level
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
36 46.11 Providing and laying autoclave aerated concrete blocks masonry as per drawing 4853.50 Rupees Four Thousand Cmt
(Thickness above 150 to 350 mm) in single or multiple layers in cement mortar Eight Hundred Fifty
1:5 (1 cement : 5 fine sand). Crushing strength of aerated concrete block/ bats Three And Paise Fifty
shall not be less than 40 KG/sqcm, minimum density in oven dry condition Only
between 651 to 750 KG/CUM, thermal conductivity shall not exceed 0.3 W/m.k,
fire resistant 4 hours, in true line level and plumb and cleaning the surface with
necessary tool tackles etc. at all floors, any heights, all depths, any levels (in
foundation and superstructure) and all places including curing, scaffolding,
racking / flush jointing etc complete, as per drawing / specification and
approved by architect and as directed by Engineer In charge for all civil,
plumbing, electrical & infrastructure works. at 6th floor level
37 37.52 Providing and laying autoclave aerated concrete blocks masonry as per drawing 4895.93 Rupees Four Thousand Cmt
(Thickness above 150 to 350 mm) in single or multiple layers in cement mortar Eight Hundred Ninety
1:5 (1 cement : 5 fine sand). Crushing strength of aerated concrete block/ bats Five And Paise Ninety
shall not be less than 40 KG/sqcm, minimum density in oven dry condition Three Only
between 651 to 750 KG/CUM, thermal conductivity shall not exceed 0.3 W/m.k,
fire resistant 4 hours, in true line level and plumb and cleaning the surface with
necessary tool tackles etc. at all floors, any heights, all depths, any levels (in
foundation and superstructure) and all places including curing, scaffolding,
racking / flush jointing etc complete, as per drawing / specification and
approved by architect and as directed by Engineer In charge for all civil,
plumbing, electrical & infrastructure works. at stair cabin level
38 330.53 Half brick masonry in common brunt clay building bricks having crushing 684.26 Rupees Six Hundred Smt
strength not less than 35 kg/Sq.cm in cement mortar 1 : 4 ( 1 cement : 4 coarse Eighty Four And Paise
sand ) in foundation and plinth. extra for half brick masonry in super structure at Twenty Six Only
1st floor. (B) conventional with all lead and lift as directed by engineer in
charge. at 1st floor.
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
39 330.52 Half brick masonry in common brunt clay building bricks having crushing 793.12 Rupees Seven Hundred Smt
strength not less than 35 kg/Sq.cm in cement mortar 1 : 4 ( 1 cement : 4 coarse Ninety Three And Paise
sand ) in foundation and plinth. extra for half brick masonry in super structure at Twelve Only
2nd floor. (B) conventional with all lead and lift as directed by engineer in
charge. at 2nd floor.
40 330.52 Half brick masonry in common brunt clay building bricks having crushing 847.55 Rupees Eight Hundred Smt
strength not less than 35 kg/Sq.cm in cement mortar 1 : 4 ( 1 cement : 4 coarse Forty Seven And Paise
sand ) in foundation and plinth. extra for half brick masonry in super structure at Fifty Five Only
3rd floor. (B) conventional with all lead and lift as directed by engineer in
charge. at 3rd floor.
41 141.79 Half brick masonry in common brunt clay building bricks having crushing 901.98 Rupees Nine Hundred Smt
strength not less than 35 kg/Sq.cm in cement mortar 1 : 4 ( 1 cement : 4 coarse One And Paise Ninety
sand ) in foundation and plinth. extra for half brick masonry in super structure at Eight Only
4th floor. (B) conventional with all lead and lift as directed by engineer in
charge. at 4th floor.
42 141.79 Half brick masonry in common brunt clay building bricks having crushing 956.41 Rupees Nine Hundred Smt
strength not less than 35 kg/Sq.cm in cement mortar 1 : 4 ( 1 cement : 4 coarse Fifty Six And Paise Forty
sand ) in foundation and plinth. extra for half brick masonry in super structure at One Only
5th floor. (B) conventional with all lead and lift as directed by engineer in
charge. at 5th floor.
43 141.79 Half brick masonry in common brunt clay building bricks having crushing 1010.84 Rupees One Thousand Smt
strength not less than 35 kg/Sq.cm in cement mortar 1 : 4 ( 1 cement : 4 coarse Ten And Paise Eighty
sand ) in foundation and plinth. extra for half brick masonry in super structure at Four Only
6th floor. (B) conventional with all lead and lift as directed by engineer in
charge. at 6th floor.
44 5.72 Providing and laying controlled cement concrete M:200 RCC and curing 7872.95 Rupees Seven Thousand Cmt
complete including the cost of form work but excluding the cost of Eight Hundred Seventy
reinforcement for reinforced concrete work in Lintel /sill Bend at Basement Two And Paise Ninety
level and ground floor level with all lead and lift as directed by engineer in Five Only
charge. R.C.C Lintel / Sill Bend at ground floor level
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
45 25.47 Providing and laying controlled cement concrete M:200 RCC and curing 7914.54 Rupees Seven Thousand Cmt
complete including the cost of form work but excluding the cost of Nine Hundred Fourteen
reinforcement for reinforced concrete work in Lintel / Sill Bend at 1st floor And Paise Fifty Four Only
with all lead and lift as directed by engineer in charge. R.C.C Lintel / Sill Bend
46 24.81 Providing and laying controlled cement concrete M:200 RCC and curing 7956.13 Rupees Seven Thousand Cmt
complete including the cost of form work but excluding the cost of Nine Hundred Fifty Six
reinforcement for reinforced concrete work in Lintel / Sill Bend at 2nd floor And Paise Thirteen Only
with all lead and lift as directed by engineer in charge. R.C.C Lintel / Sill Bend
47 24.81 Providing and laying controlled cement concrete M:200 RCC and curing 7997.73 Rupees Seven Thousand Cmt
complete including the cost of form work but excluding the cost of Nine Hundred Ninety
reinforcement for reinforced concrete work in Lintel / Sill Bend at 3rd floor Seven And Paise Seventy
with all lead and lift as directed by engineer in charge. R.C.C Lintel / Sill Bend Three Only
48 13.56 Providing and laying controlled cement concrete M:200 RCC and curing 8039.32 Rupees Eight Thousand Cmt
complete including the cost of form work but excluding the cost of Thirty Nine And Paise
reinforcement for reinforced concrete work in Lintel / Sill Bend at 4th floor Thirty Two Only
with all lead and lift as directed by engineer in charge. R.C.C Lintel / Sill Bend
49 11.66 Providing and laying controlled cement concrete M:200 RCC and curing 8080.91 Rupees Eight Thousand Cmt
complete including the cost of form work but excluding the cost of Eighty And Paise Ninety
reinforcement for reinforced concrete work in Lintel / Sill Bend at 5th floor One Only
with all lead and lift as directed by engineer in charge. R.C.C Lintel / Sill Bend
50 11.66 Providing and laying controlled cement concrete M:200 RCC and curing 8122.50 Rupees Eight Thousand Cmt
complete including the cost of form work but excluding the cost of One Hundred Twenty
reinforcement for reinforced concrete work in Lintel / Sill Bend at 6th floor Two And Paise Fifty Only
with all lead and lift as directed by engineer in charge. R.C.C Lintel / Sill Bend at
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
51 0.91 Providing and laying controlled cement concrete M:200 RCC and curing 8164.09 Rupees Eight Thousand Cmt
complete including the cost of form work but excluding the cost of One Hundred Sixty Four
reinforcement for reinforced concrete work in Lintel / Sill Bend at stair cabin And Paise Nine Only
with all lead and lift as directed by engineer in charge. R.C.C Lintel / Sill Bend
52 86.93 Providing and laying controlled cement concrete M:250 RCC and curing 6503.39 Rupees Six Thousand Cmt
complete including the cost of form work but excluding the reinforcement for Five Hundred Three And
reinforced concrete work in Slab level beam with all lead and lift as directed Paise Thirty Nine Only
by engineer incharge. at ground floor
53 121.02 Providing and laying controlled cement concrete M:250 RCC and curing 6544.98 Rupees Six Thousand Cmt
complete including the cost of form work but excluding the reinforcement for Five Hundred Forty Four
reinforced concrete work in Slab level beam with all lead and lift as directed And Paise Ninety Eight
by engineer incharge.at 1st floor Only
54 119.01 Providing and laying controlled cement concrete M:250 RCC and curing 6586.57 Rupees Six Thousand Cmt
complete including the cost of form work but excluding the reinforcement for Five Hundred Eighty Six
reinforced concrete work in Slab level beam with all lead and lift as directed And Paise Fifty Seven
by engineer incharge. at 2nd floor Only
55 119.01 Providing and laying controlled cement concrete M:250 RCC and curing 6628.17 Rupees Six Thousand Six Cmt
complete including the cost of form work but excluding the reinforcement for Hundred Twenty Eight
reinforced concrete work in Slab level beam with all lead and lift as directed And Paise Seventeen
by engineer incharge.at 3rd floor Only
56 48.34 Providing and laying controlled cement concrete M:250 RCC and curing 6669.76 Rupees Six Thousand Six Cmt
complete including the cost of form work but excluding the reinforcement for Hundred Sixty Nine And
reinforced concrete work in Slab level beam with all lead and lift as directed Paise Seventy Six Only
by engineer incharge. R.C.C Slab level beam at 4th floor
57 39.85 Providing and laying controlled cement concrete M:250 RCC and curing 6711.35 Rupees Six Thousand Cmt
complete including the cost of form work but excluding the reinforcement for Seven Hundred Eleven
reinforced concrete work in Slab level beam with all lead and lift as directed And Paise Thirty Five
by engineer incharge. R.C.C Slab level beam at 5th floor Only
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
58 39.85 Providing and laying controlled cement concrete M:250 RCC and curing 6752.94 Rupees Six Thousand Cmt
complete including the cost of form work but excluding the reinforcement for Seven Hundred Fifty Two
reinforced concrete work in Slab level beam with all lead and lift as directed And Paise Ninety Four
by engineer incharge. R.C.C Slab level beam at 6th floor Only
59 5.70 Providing and laying controlled cement concrete M:250 RCC and curing 6794.53 Rupees Six Thousand Cmt
complete including the cost of form work but excluding the reinforcement for Seven Hundred Ninety
reinforced concrete work in Slab level beam with all lead and lift as directed Four And Paise Fifty
by engineer incharge. R.C.C Slab level beam at Stair cabin floor Three Only
60 136.78 Providing and laying controlled cement concrete M:250 RCC and curing 6921.53 Rupees Six Thousand Cmt
complete including the cost of form work but excluding the reinforcement for Nine Hundred Twenty
reinforced concrete work in Slab with all lead and lift as directed by engineer One And Paise Fifty
incharge. At ground floor Three Only
61 122.14 Providing and laying controlled cement concrete M:250 RCC and curing 6963.12 Rupees Six Thousand Cmt
complete including the cost of form work but excluding the reinforcement for Nine Hundred Sixty
reinforced concrete work in Slab with all lead and lift as directed by engineer Three And Paise Twelve
incharge. At 1st Floor Only
62 118.14 Providing and laying controlled cement concrete M:250 RCC and curing 7004.71 Rupees Seven Thousand Cmt
complete including the cost of form work but excluding the reinforcement for Four And Paise Seventy
reinforced concrete work in Slab with all lead and lift as directed by engineer One Only
incharge. At 2nd floor
63 118.13 Providing and laying controlled cement concrete M:250 RCC and curing 7046.31 Rupees Seven Thousand Cmt
complete including the cost of form work but excluding the reinforcement for Forty Six And Paise
reinforced concrete work in Slab with all lead and lift as directed by engineer Thirty One Only
incharge. At 3rd floor
64 57.22 Providing and laying controlled cement concrete M:250 RCC and curing 7087.90 Rupees Seven Thousand Cmt
complete including the cost of form work but excluding the reinforcement for Eighty Seven And Paise
reinforced concrete work in Slab with all lead and lift as directed by engineer Ninety Only
incharge. At 4th floor
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
65 45.11 Providing and laying controlled cement concrete M:250 RCC and curing 7129.49 Rupees Seven Thousand Cmt
complete including the cost of form work but excluding the reinforcement for One Hundred Twenty
reinforced concrete work in Slab with all lead and lift as directed by engineer Nine And Paise Forty
incharge. At 5th floor Nine Only
66 45.11 Providing and laying controlled cement concrete M:250 RCC and curing 7171.08 Rupees Seven Thousand Cmt
complete including the cost of form work but excluding the reinforcement for One Hundred Seventy
reinforced concrete work in Slab with all lead and lift as directed by engineer One And Paise Eight Only
incharge. At 6th floor
67 7.40 Providing and laying controlled cement concrete M:250 RCC and curing 7212.67 Rupees Seven Thousand Cmt
complete including the cost of form work but excluding the reinforcement for Two Hundred Twelve
reinforced concrete work in Slab with all lead and lift as directed by engineer And Paise Sixty Seven
incharge. At stair cabin Only
68 0.17 Providing and laying controlled cement concrete M: 200 RCC and curing 6972.03 Rupees Six Thousand Cmt
complete including the cost of form work but excluding the reinforcement for Nine Hundred Seventy
reinforced concrete work in projection /Whether shed Cantilevers up to floor Two And Paise Three
two level with all lead and lift as directed by engineer incharge. at ground floor Only
69 6.49 Providing and laying controlled cement concrete M: 200 RCC and curing 7013.62 Rupees Seven Thousand Cmt
complete including the cost of form work but excluding the reinforcement for Thirteen And Paise Sixty
reinforced concrete work in projection /Whether shed Cantilevers up to floor Two Only
two level with all lead and lift as directed by engineer incharge. at 1st floor
70 6.06 Providing and laying controlled cement concrete M: 200 RCC and curing 7055.21 Rupees Seven Thousand Cmt
complete including the cost of form work but excluding the reinforcement for Fifty Five And Paise
reinforced concrete work in projection /Whether shed Cantilevers up to floor Twenty One Only
two level with all lead and lift as directed by engineer incharge at 2nd floor
71 6.06 Providing and laying controlled cement concrete M: 200 RCC and curing 7096.81 Rupees Seven Thousand Cmt
complete including the cost of form work but excluding the reinforcement for Ninety Six And Paise
reinforced concrete work in projection /Whether shed Cantilevers up to floor Eighty One Only
two level with all lead and lift as directed by engineer incharge at 3rd floor
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
72 0.77 Providing and laying controlled cement concrete M: 200 RCC and curing 7138.40 Rupees Seven Thousand Cmt
complete including the cost of form work but excluding the reinforcement for One Hundred Thirty
reinforced concrete work in projection /Whether shed Cantilevers up to floor Eight And Paise Forty
two level with all lead and lift as directed by engineer incharge at 4th floor Only
73 0.49 Providing and laying controlled cement concrete M: 200 RCC and curing 7179.99 Rupees Seven Thousand Cmt
complete including the cost of form work but excluding the reinforcement for One Hundred Seventy
reinforced concrete work in projection /Whether shed Cantilevers up to floor Nine And Paise Ninety
two level with all lead and lift as directed by engineer incharge at 5th floor Nine Only
74 0.49 Providing and laying controlled cement concrete M: 200 RCC and curing 7221.58 Rupees Seven Thousand Cmt
complete including the cost of form work but excluding the reinforcement for Two Hundred Twenty
reinforced concrete work in projection /Whether shed Cantilevers up to floor One And Paise Fifty Eight
two level with all lead and lift as directed by engineer incharge at 6th floor Only
75 0.14 Providing and laying controlled cement concrete M: 200 RCC and curing 7263.17 Rupees Seven Thousand Cmt
complete including the cost of form work but excluding the reinforcement for Two Hundred Sixty Three
reinforced concrete work in projection /Whether shed Cantilevers up to floor And Paise Seventeen
two level with all lead and lift as directed by engineer incharge at stair cabin Only
76 6.38 Providing and laying controlled cement concrete M: 250 RCC and curing 7943.98 Rupees Seven Thousand Cmt
complete including the cost of form work but excluding the reinforcement for Nine Hundred Forty
reinforced concrete work in RCC Staircase at ground floor level with all lead Three And Paise Ninety
and lift as directed by engineer in charge. at ground floor level Eight Only
77 6.35 Providing and laying controlled cement concrete M: 250 RCC and curing 7985.57 Rupees Seven Thousand Cmt
complete including the cost of form work but excluding the reinforcement for Nine Hundred Eighty
reinforced concrete work in RCC Staircase at 1st floor level with all lead and lift Five And Paise Fifty
as directed by engineer in charge. at 1st floor level Seven Only
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
78 6.35 Providing and laying controlled cement concrete M: 250 RCC and curing 8027.16 Rupees Eight Thousand Cmt
complete including the cost of form work but excluding the reinforcement for Twenty Seven And Paise
reinforced concrete work in RCC Staircase at 2ndfloor level with all lead and Sixteen Only
lift as directed by engineer in charge. at 2ndfloor level
79 6.35 Providing and laying controlled cement concrete M: 250 RCC and curing 8068.75 Rupees Eight Thousand Cmt
complete including the cost of form work but excluding the reinforcement for Sixty Eight And Paise
reinforced concrete work in RCC Staircase at 3rd floor level with all lead and Seventy Five Only
lift as directed by engineer in charge. at 3rd floor level
80 2.32 Providing and laying controlled cement concrete M: 250 RCC and curing 8110.34 Rupees Eight Thousand Cmt
complete including the cost of form work but excluding the reinforcement for One Hundred Ten And
reinforced concrete work in RCC Staircase at 4th floor level with all lead and Paise Thirty Four Only
lift as directed by engineer in charge. at 4th floor level
81 2.32 Providing and laying controlled cement concrete M: 250 RCC and curing 8151.94 Rupees Eight Thousand Cmt
complete including the cost of form work but excluding the reinforcement for One Hundred Fifty One
reinforced concrete work in RCC Staircase at 5th floor level with all lead and And Paise Ninety Four
lift as directed by engineer in charge. at 5th floor level Only
82 2.32 Providing and laying controlled cement concrete M: 250 RCC and curing 8193.53 Rupees Eight Thousand Cmt
complete including the cost of form work but excluding the reinforcement for One Hundred Ninety
reinforced concrete work in RCC Staircase at 6th floor level with all lead and Three And Paise Fifty
lift as directed by engineer in charge. at 6th floor level Three Only
83 118073.31 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, 77.29 Rupees Seventy Seven Kg
binding and placing in position complete upto floor two level And Paise Twenty Nine
84 53120.42 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, 78.34 Rupees Seventy Eight Kg
binding and placing in position complete first floor level. And Paise Thirty Four
85 53115.56 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, 79.39 Rupees Seventy Nine Kg
binding and placing in position complete second floor level. And Paise Thirty Nine
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
86 53776.10 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, 80.44 Rupees Eighty And Paise Kg
binding and placing in position complete third floor level. Forty Four Only
87 26309.98 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, 81.49 Rupees Eighty One And Kg
binding and placing in position complete fourth floor level. Paise Forty Nine Only
88 20670.95 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, 82.54 Rupees Eighty Two And Kg
binding and placing in position complete fifth floor level. Paise Fifty Four Only
89 20670.95 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, 83.59 Rupees Eighty Three And Kg
binding and placing in position complete sixth floor level. Paise Fifty Nine Only
90 4288.71 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, 84.64 Rupees Eighty Four And Kg
binding and placing in position complete. At Stair cabin level Paise Sixty Four Only
91 1279.32 Providing 15 mm thick Mala cement plaster in double coat mala cement plaster 296.42 Rupees Two Hundred Smt
on interior brick/concrete work/ AAC block wall for interior plastering upto floor Ninety Six And Paise
two level & finished even and smooth : (ii) C M 1:4 ( 1 cement 4 sand) (A) Forty Two Only
92 3201.66 Providing 15 mm thick Mala cement plaster in double coat mala cement plaster 323.65 Rupees Three Hundred Smt
on interior brick/concrete work/ AAC block wall for interior plastering upto floor Twenty Three And Paise
two level & finished even and smooth : (ii) C M 1:4 ( 1 cement 4 sand) First Sixty Five Only
93 3201.64 Providing 15 mm thick Mala cement plaster in double coat mala cement plaster 350.88 Rupees Three Hundred Smt
on interior brick/concrete work/ AAC block wall for interior plastering upto floor Fifty And Paise Eighty
two level & finished even and smooth : (ii) C M 1:4 ( 1 cement 4 sand) 2nd Floor Eight Only
94 3201.64 Providing 15 mm thick Mala cement plaster in double coat mala cement plaster 378.11 Rupees Three Hundred Smt
on interior brick/concrete work/ AAC block wall for interior plastering upto floor Seventy Eight And Paise
two level & finished even and smooth : (ii) C M 1:4 ( 1 cement 4 sand) At 3rd Eleven Only
95 2461.93 Providing 15 mm thick Mala cement plaster in double coat mala cement plaster 405.34 Rupees Four Hundred Smt
on interior brick/concrete work/ AAC block wall for interior plastering upto floor Five And Paise Thirty
two level & finished even and smooth : (ii) C M 1:4 ( 1 cement 4 sand) At 4th Four Only
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
96 1603.23 Providing 15 mm thick Mala cement plaster in double coat mala cement plaster 432.57 Rupees Four Hundred Smt
on interior brick/concrete work/ AAC block wall for interior plastering upto floor Thirty Two And Paise
two level & finished even and smooth : (ii) C M 1:4 ( 1 cement 4 sand) at 5th Fifty Seven Only
97 1603.23 Providing 15 mm thick Mala cement plaster in double coat mala cement plaster 459.80 Rupees Four Hundred Smt
on interior brick/concrete work/ AAC block wall for interior plastering upto floor Fifty Nine And Paise
two level & finished even and smooth : (ii) C M 1:4 ( 1 cement 4 sand) At 6th Eighty Only
98 453.24 Providing 15 mm thick Mala cement plaster in double coat mala cement plaster 487.03 Rupees Four Hundred Smt
on interior brick/concrete work/ AAC block wall for interior plastering upto floor Eighty Seven And Paise
two level & finished even and smooth : (ii) C M 1:4 ( 1 cement 4 sand) At Stair Three Only
99 1088.53 Providing 10 mm thick mala cement plaster in single coat on ceiling and soffits 155.35 Rupees One Hundred Smt
of stairs for interior plastering up to floor two level and finished even and Fifty Five And Paise
smooth in (ii)Cement mortar 1:4 (1cement :4 sand) mala plastering line , level Thirty Five Only
and plumb to developed even surface as per instruction of engineer in charge
etc complete. with all lead and lift as directed by engineer in charge. At Ground
100 959.41 Providing 10 mm thick mala cement plaster in single coat on ceiling and soffits 179.24 Rupees One Hundred Smt
of stairs for interior plastering up to floor two level and finished even and Seventy Nine And Paise
smooth in (ii)Cement mortar 1:4 (1cement :4 sand) mala plastering line , level Twenty Four Only
and plumb to developed even surface as per instruction of engineer in charge
etc complete. with all lead and lift as directed by engineer in charge. At 1st
101 959.41 Providing 10 mm thick mala cement plaster in single coat on ceiling and soffits 203.14 Rupees Two Hundred Smt
of stairs for interior plastering up to floor two level and finished even and Three And Paise
smooth in (ii)Cement mortar 1:4 (1cement :4 sand) mala plastering line , level Fourteen Only
and plumb to developed even surface as per instruction of engineer in charge
etc complete. with all lead and lift as directed by engineer in charge. At 2nd
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
102 959.41 Providing 10 mm thick mala cement plaster in single coat on ceiling and soffits 227.04 Rupees Two Hundred Smt
of stairs for interior plastering up to floor two level and finished even and Twenty Seven And Paise
smooth in (ii)Cement mortar 1:4 (1cement :4 sand) mala plastering line , level Four Only
and plumb to developed even surface as per instruction of engineer in charge
etc complete. with all lead and lift as directed by engineer in charge. r At 3rd
103 401.65 Providing 10 mm thick mala cement plaster in single coat on ceiling and soffits 250.93 Rupees Two Hundred Smt
of stairs for interior plastering up to floor two level and finished even and Fifty And Paise Ninety
smooth in (ii)Cement mortar 1:4 (1cement :4 sand) mala plastering line , level Three Only
and plumb to developed even surface as per instruction of engineer in charge
etc complete with all lead and lift as directed by engineer in charge. At 4th
104 306.69 Providing 10 mm thick mala cement plaster in single coat on ceiling and soffits 274.83 Rupees Two Hundred Smt
of stairs for interior plastering up to floor two level and finished even and Seventy Four And Paise
smooth in (ii)Cement mortar 1:4 (1cement :4 sand) mala plastering line , level Eighty Three Only
and plumb to developed even surface as per instruction of engineer in charge
etc complete. At 5th floor level with all lead and lift as directed by engineer in
charge. At 5th floor level
105 306.69 Providing 10 mm thick mala cement plaster in single coat on ceiling and soffits 298.73 Rupees Two Hundred Smt
of stairs for interior plastering up to floor two level and finished even and Ninety Eight And Paise
smooth in (ii)Cement mortar 1:4 (1cement :4 sand) mala plastering line , level Seventy Three Only
and plumb to developed even surface as per instruction of engineer in charge
etc complete. At 6th floor level with all lead and lift as directed by engineer
incharge.At 6th floor level
106 64.78 Providing 10 mm thick mala cement plaster in single coat on ceiling and soffits 322.62 Rupees Three Hundred Smt
of stairs for interior plastering up to floor two level and finished even and Twenty Two And Paise
smooth in (ii)Cement mortar 1:4 (1cement :4 sand) mala plastering line , level Sixty Two Only
and plumb to developed even surface as per instruction of engineer in charge
etc complete. At Stair cabin floor level with all lead and lift as directed by
engineer in charge. At Stair cabin floor level
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
107 6503.25 Providing and laying average 20 mm. thick Sand faced cement plaster on 444.40 Rupees Four Hundred Smt
masonry work/AAC Block / RCC wall upto all height & all lift above ground level Forty Four And Paise
and for all shapes consisting of first coat (backing coat) average 12 mm. thick Forty Only
with CM 1:3 (1 cement: 3 coarse sand) rough wired finish and second coat of
average 8 mm. thick uniform grained textured by using wooden Gutka in CM 1:1
(1 cement: 1 sand), including scaffolding, hacking to RCC surface, forming
grooves, drip moulds, pattas, curing etc. complete as directed by engineer-in-
108 173.60 Providing and applying external finish of average 2 to 2.5mm thick acrylic 888.80 Rupees Eight Hundred Smt
polymer based texture Heritage surface wall textures and pattern with standard Eighty Eight And Paise
tool and applicator as specified by manufacturer on exterior surfaces at all Eighty Only
heights including scaffolding to give even shades including thoroughly brushing
the surfaces free from mortar droping and other foreign matter and sand paper
smoothed etc. complete as per the manufacture specifications and up to the
satisfaction of Engineer in-charge/ Architect. The rate includes making of
grooves, pattas and finishing as directed by Architect/ EIC. Paint shall be
measured and paid in seperate tender item. (Item should be executed by
approved applicator only.)
109 934.20 Providing throating or plaster drip and molding to R.C.C. Chhajja. with up to all 43.05 Rupees Forty Three And Rmt
and any floor with all lead & lift etc complete. Paise Five Only
110 20902.95 Applying two coats of Birla or Asian acrylic lippy (putty) and two coats of primer 40.59 Rupees Forty And Paise Smt
of approved brand and manufacture on new wall surface to give an even shade Fifty Nine Only
including thoroughly brushing the surface free from mortar dropping and other
foreign matter and sand prepared smooth. with up to all and any floor with all
lead & lift etc complete.
111 17005.91 Wall Painting (three coats) with plastic emulation paint of approved brand and 125.40 Rupees One Hundred Smt
manufacture on undecorated wall surface to give an even shade including Twenty Five And Paise
thoroughly brushing the surface free from mortar droppings and other Forty Only
foreingnmatter and sand papered smooth extra every subsequent coat of wall
painting with plastic emulation paint of approved brand. with up to all and any
floor with all lead & lift etc complete.
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
112 4041.04 Ceiling painting (three coats) with plastic emulsion paint of approved brand and 130.93 Rupees One Hundred Smt
manufacture on undecorated wall surface to give an even shade including Thirty And Paise Ninety
thoroughly brushing the surface free from mortar droppings and other foreign Three Only
matter and sand papered smooth. with up to all and any floor with all lead & lift
113 7611.05 Finishing wall with weather proof Apex exterior emulsion paint on wall surface 120.26 Rupees One Hundred Smt
(Three coats) with Primer coat to give an required shape even shade after Twenty And Paise
thoroughly brushing the surface to remove all dirt, and remains of loose Twenty Six Only
powdered materials with up to all and any floor with all lead & lift etc complete.
114 144.09 Providing and laying Vitrified tiles 8 to 10 mm thick , 36''x 36'' in flooring treads 1531.82 Rupees One Thousand Smt
of steps and landing laid on abed of 12mm thick cement mortar 1:3 (1-cement : Five Hundred Thirty One
3-coarse sand ) finishing with flush pointing in white cement And Paise Eighty Two
115 2995.23 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads 1120.36 Rupees One Thousand Smt
of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : One Hundred Twenty
3-coarse sand ) finishing with flush pointing in white cement And Paise Thirty Six Only
116 338.70 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting risers of 1195.02 Rupees One Thousand Smt
steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) One Hundred Ninety Five
and jointed with white cement slurry And Paise Two Only
117 146.65 Providing and laying polished Kota stone slab flooring over 20mm (Average) 1019.39 Rupees One Thousand Smt
thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime Nineteen And Paise
putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed Thirty Nine Only
with pigment to match the shade of slab including rubbing and polishing etc.
complete. (A) 25mm thick
118 26.90 Providing and laying polished kota stone slab 25mm thick in risers of 1210.07 Rupees One Thousand Smt
teps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : Two Hundred Ten And
3 coarse sand) and jointed with gray cement slury mixed with pigment to match Paise Seven Only
the shade of slab including rubbing and polishing etc. complete.
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
119 425.70 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of 1467.72 Rupees One Thousand Smt
cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on Four Hundred Sixty
existing flooring by adhesive material including dismentaling of existing flooring Seven And Paise Seventy
and jointed with color cement slurry including finised with flush pointing & Two Only
cleaning the surface etc. complete for antiskit
120 2748.21 Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm / 1488.24 Rupees One Thousand Smt
300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on 10 mm. thick Four Hundred Eighty
cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement slurry Eight And Paise Twenty
121 67.16 Providing & lying Pavit Exterior paving tilessquare rasso /beige series 300mm 1456.42 Rupees One Thousand Smt
x300mm and 10 mm thick In floor tiles with first quality only on a bed of 25 Four Hundred Fifty Six
mm thick cement mortar 1:6 ( 1 cement : 6 coarse sand finished bed with flush And Paise Forty Two Only
pointing in white cement ) pointing in white cement and jointed jointed with
matching pigment ,adhesive white cement & other bounding material. Laying of
tiles in line and level & camber complete laid as per design , pattern , different
shape & colour combination as per detail design or instruction of architect and
as directed by engineer in charge etc complete with up to all and any floor with
all lead & lift etc complete.
122 1111.30 Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 779.70 Rupees Seven Hundred Smt
mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or Seventy Nine And Paise
slope and to be tempered to bring mortar creme out upto surface using white Seventy Only
cement including rounding off junctions and extending them upto 15 cm along
the wall,clearing with water and oxalic acid etc. as directed
123 1085.80 Providing and laying cement concrete flooring 1:2:4(1-cement :2-coarses and : 4- 339.08 Rupees Three Hundred Smt
graded stone aggregate 20mm nominal size) laidinone layerand finished with a Thirty Nine And Paise
floating coat of neat cement. (B) 50mm thick. Eight Only
124 678.50 Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 24.28 Rupees Twenty Four And Rmt
including neat cement finishing, watering etc. complete. Paise Twenty Eight Only
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
125 341.00 Providing and fixing on wall face un plasticized Rigid PVC 110 mm diameter rain 353.50 Rupees Three Hundred Rmt
water pipes 10kg/smt conforming to IS : 13592 Type A, including jointing with Fifty Three And Paise
seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Fifty Only
Single socketed pipes of Approved brands only. etc complete up to all floor
level with all lead and lift as per instruction of engineer in charge.
126 28000.00 Providing erecting and fixing double coated ISI water tank of required capacity 3.95 Rupees Three And Paise Ltr
each with all necessary fittings and connection etc. complete on terrace Ninety Five Only
127 1521.00 Providing and laying APP (Atactic Polypropylene Polymer) modified 480.14 Rupees Four Hundred Smt
prefabricated five layer, 3 mm thick water proofing membrane, black finished Eighty And Paise
reinforced with glass fibre matt consisting of a coat of bitumen primer for Fourteen Only
bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of
density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer
coat the layer of membrane shall be laid using butane torch and sealing all joints
etc., and preparing the surface complete. The vital physical and chemical
parameters of the membrane shall be as under : Joint strength in longitudinal
and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in
longitudinal and transverse direction as 60/80N. Softening point of membrane
not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance
with ASTM, D - 5147. The laying of membrane shall be got done through the
authorized applicator of the manufacturer of membrane 3 mm thick as directed
by engineer in charge
128 127.72 Providing Filling in Sunk Portion with cinder of best approved quality including 360.57 Rupees Three Hundred Cmt
watering ,ramming consolidation and dressing etc. complete as directed in toilet Sixty And Paise Fifty
and bath sunken area at all floor up to all lead and lift. Seven Only
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
129 842.03 Providing and fixing of minimum 16 mm thick telephonic Black Granite stone 2687.61 Rupees Two Thousand Smt
slab for jambs of doors and window . Black Granite should be spotless ,without Six Hundred Eighty
any crack , vain or other damages joined with grey cement slurry and matching Seven And Paise Sixty
pigment in vertical and horizontal member , including rubbing and polishing One Only
and full round edge molding on both the sides( edge), Mirror polishing curing
of the Black Granite stone as per detail design and instruction. The door frame
should have sandwich type Jambs stone fitting to accommodate fixing of door
where required, the fixing of jambs with necessary binding wire tiles piece,
adhesive, clamp, fastener, white cement and matching pigment other
consumable, molding and polishing machinery other tools, tackles required to
complete the item and where two member vertical and horizontal meet it
should cut 45 degree angle etc up to all floor with all lead & lift etc complete.
The Black Granite stone size and quality should be as per sample approved by
architect and Engineer in charge.
130 119.72 Providing & laying sandwich platform comprising of a) Sandwich of 18 mm thick 6720.54 Rupees Six Thousand Smt
single side polish Granite of approved size, shade and sample on top and 30 mm Seven Hundred Twenty
thick polished kota in bottom with 25mm thick cement mortar (1:4) in between And Paise Fifty Four Only
b) At centre vertical sandwich supports of 30 mm thick two kota stone on sides
and 20mm CM (1:4) in between and at both end walls vertical supports of
mm thick double side granite. c) 75 mm raised platform at bottom with kota on
top and 50mm CM (1:4) at bottom, kota stone skirting as per design and
approved sample. The rate includes rounding, champhering and mirror polishing
of edges, facias of granite, MS support including necessary bonding adhesive (if
required). Rate shall be also inclusive of making holes & cutouts for SS sink, Oval
wash basin, Piller tap / Bib tap etc. as directed by engineer in charge. (Only plan
area shall be measured & paid for). Rate shall be included all kota & granite
mentioned in above.
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
131 36.40 Providing and fixing alluminium Panelled single/double door Partly Glazed & 6639.55 Rupees Six Thousand Six Smt
Partly with 12 mm thick both side pre laminated Particle Board with Frame Hundred Thirty Nine And
having extruded alluminium color anodized section frame main Frame size Paise Fifty Five Only
101.60 mm x 44.45 mm x 3.18mm ( of Section No.20011 @ wt. of 2.54 kg/mt
)unit providing shutters of bottom & Top rail- 114.30 mm x 25.40 mm x 3.18mm
(of Section No.19511 @ wt. of 2.65 kg/mt ) Shutter Middle rail = 150 mm x
x 2.65 mm (of Jindal Section No.20002 @ wt. of 2.79 kg/mt) Vertical member
Shutter style = 85.00 mm x 44 mm x 3.00(of Jindal Section No.19509 @ wt. of
1.51 kg/mt).with 12mmth. both side pre laminated particle board (novapan)
conforming to IS: 12823 Grade 1 Type II in panelling fixed in aluminium door
consisting of outer frame shutter as per design with two pairs of standard
handles, two pair of concealed shoot bolts 250mm long and pin type narrow
style lock and thumb turn from the other side, including all fixtures, fastening
etc. complete as directed and as per drawing and design. Rate including
hinges/Pivots and making provision for fixing of fitting wherver required
including the cost of EPDM rubber/neoprene gasket required Anodised
aluminium (work for all floors)
132 281.09 Providing and fixing threee treack alluminium Sliding shutter Cardinal series 9754.58 Rupees Nine Thousand Smt
CS25 base channel 3 In 1 Model having weight of 2.226 Kg/mtr 8mm Single Seven Hundred Fifty
Glass Shutter 0.835 kg/mr shutter INTERLOCK Universal Clip 0.393 kg/mtr TRACK Four And Paise Fifty
RAIL CAP 0.156 kg/mtr "V" Type with 8 mm thick transparent toughen float glass Eight Only
with powder coated aluminum fittings and fixtures handel , lock and othe
asscessories . The sliding door should be fix with transparent silicon sealant glass
fixing to frame as per details etc
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
133 240.20 Providing and fixing window having extruded aluminum Colour Powder Coated 1591.87 Rupees One Thousand Smt
section frame main outer size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt, Five Hundred Ninety One
horizontal Three track member size 92mm x 31.75mm x 1.30mm @ Wt.1.07 And Paise Eighty Seven
Kg/mt, vertical member of size 92mm x 31.75mm x 1.50mm ,@ Wt. 1.06 Kg/mt Only
with sliding shutters of horizontal member size 40 mmx18mm x1.29mm @ wt.of
0.456 Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm @ wt.of
0.456Kg/mt with 5 mm thick transparent bronze colour tinted float glass with
powder coated aluminum fittings and fixtures and transparent silicon sealant
glass fixing to frame as per details etc
134 176.63 Providing and fixing window having extruded aluminum Colour Powder Coated 1705.67 Rupees One Thousand Smt
section frame main outer size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, Seven Hundred Five And
horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm @ wt.of Paise Sixty Seven Only
0.695 Kg/mt, vertical member of size 61.85 mm x 31.75mm x 1.30 mm @ wt.of
0.0.659 Kg/mt with sliding shutters of horizontal member size 40mm x18mm x
1.29mm @ wt.of 0.456Kg/mt, vertical member of size 40mm x 18mm x 1.29mm
@ wt.of 0.456Kg/mt with 5mm thick transparent bronze colour tinted float glass
with powder coated aluminum fittings and fixtures and transparent silicon
sealant glass fixing to frame as per details etc complete for window
135 20.25 Providing and fixing standared extruded of alluminium section of size 63mm x 1175.56 Rupees One Thousand Smt
38.10mm x 1.2mm , @ Wt. 0.643 Kg/mt with colour Powder Coated alluminium One Hundred Seventy
frame for ventilation with 5 mm thick frosted glass as details etc complete for Five And Paise Fifty Six
Ventilation Only
136 6.49 Providing wood work in frames of Doors, windows cleare story windows and 61023.19 Rupees Sixty One Cmt
othersimilar works wrought, framede and fixed in position. (A) Indian Teak Wood Thousand Twenty Three
And Paise Nineteen Only
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
137 454.96 Provoding and fixing flush door shutters, solid core construction with frame of 1829.74 Rupees One Thousand Smt
first class hardwood with cross board and face veneer or plywood face Eight Hundred Twenty
panels,including anodised alluminium butt hinges with necessary screws. (B) Nine And Paise Seventy
Non-decorative type and block board core anodised alluminium butt hinges in Four Only
flush door shutters (2) 35 mm thick
138 151.88 Providing and fixing FRP frame size 125x65 mm and 35mm thick FRP shutter 2019.98 Rupees Two Thousand Smt
with wood grain raised panneled design finish shutter having extra Nineteen And Paise
reinforcement on sides & edges in Gel coat finish.The core of the shutter & Ninety Eight Only
frame is to be filed up with injected polyurethene foam done in situ along with
embedded wooden pieces for stiffening & also taking hinges & fintures. The
whole FRP frame & shutter is to be water proof weather proof, termite proof &
resistance to mild acid/alkali. Rates are to be inclusive of S.S hinges with
fastener sleeve & alluminium fixtures & fastenings
139 666.75 Providing and fixing of decorative stainless steel SS 304 Non magnetic best 402.99 Rupees Four Hundred Kg
quality Railing/Grill as per approved sample. The SS304 Railing/Grill shall be fix Two And Paise Ninety
on the edge or periphery of staircase & steps as per detail design and Nine Only
instruction . , The Providing and fixing of SS railing including cutting,
fabrication ,SS arc welding, grinding , erection , fixing with necessary machinery
tools, tackles, labor and required civil work as per detail design at specific
location The item includes buffing, polishing , assembling of the different unit of
SS pipe Railing/Grill and required civil work for the fixing of the SS
Railing/Grill up to all floor in perfect position etc complete as per approved
sample as directed by engineer in charge. As per attached Detail specification.
140 7278.33 Providing and fixing M.S. grills of required pattern to wooden frames of 111.10 Rupees One Hundred kg
windows etc. with M.S. flats at required spacings and frame alround, square or Eleven And Paise Ten
round bars with round headed bolts and nuts or by screws (A) Plain Grill. ( as Only
detail design with two coats of primer & Anticorrosive Coating Paint and color as
per instruction of architect etc complete.
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
141 369.23 Providing and fixing of minimum 16 to 18 mm thick Black Granite stone slab of 2406.83 Rupees Two Thousand Smt
full length approved quality for flooring over Bed of 20mm ( average) thick Four Hundred Six And
base of cement mortar 1:6 (1cement : 6 coarse sand) or lime mortar 1:1.5 laid Paise Eighty Three Only
and jointed with white cement slurry and matching pigment including rubbing
and polishing complete for flooring in steps . The fixing of Black Granite stone
slab 16 to 18 mm thick at the stair case steps up to all floor in raiser & tread
including full edge molding with nosing to flooring and two anti skid grooves as
per instruction of engineer in charge . The fixing of Black Granite stone as per
detail design and instruction, including necessary Mirror polishing , cutting of
the stone , adhesive , clamp , fastener , other consumable and labor and fixing
up to all floor with all lead & lift etc complete as directed by engineer in charge.
142 495.00 Providing and fixing minimum 50mm wide sand blasting on Black Granite for 93.93 Rupees Ninety Three Rmt
stair case steps with necessary tools tacjels , equipment plant as per detail And Paise Ninety Three
design upto all floor with all lead & lift etc complete as per instruction of Only
engineer in charge.
143 1271.76 Carrying out plinth treatment during conctruction by spraying chemical solution 59.46 Rupees Fifty Nine And Smt
for termite control treatment for all type of structure. The chemical used shall Paise Forty Six Only
be chloropyriphos(1:19) / Lindane emulsifiable as per latest IS code no
(Part II). Plinth area in plan at GF shall only be measured and paid. A guarantee
bond of 10 years shall be furnished. Rate shall be inclusive of material required
for Anti Termite Treatment and labour for applying.a) Bottom surface and the
sides of the excavation made for masonry/ RCC foundations at the rate of
liters/ of surface area (wherever applicable).b) At the rate of 7.5 liter/ Sqm of
surface area to the backfill at the depth of 500mm below the original ground
level. The soil in the immediate contact with the vertical surface of RCC column
shall be treated.c) As per attached Detail specification.
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
144 12170.88 Providing and fixing G.I. hexagonal chickenmesh of size 20mm x 20mm of 22 202.00 Rupees Two Hundred Smt
gauge at junction of concrete and brick work or between different materials Two Only
after making "V" grove between two different material surface and filled with
rich cement mortar and @ 100mm on each side of surfaces including necessary
"U" nails / screws / washers with cleats for fixing, overlaps, scaffolding at all
floors / all levels / all heights / all shapes etc. complete as per drawing /
specifications and direction of Engineer-in-charge. For civil, plumbing, electrical
& infrastructure works.
145 187.36 Providing & laying Controlled cement concrete M 250 grade in Trimix flooring 4539.95 Rupees Four Thousand Cmt
/road for average 150 mm thick wearing coat in RCC Road without fly ash with Five Hundred Thirty Nine
lead of 10 Km from plant site including all other taxes octroi, transportation, And Paise Ninety Five
pumping, pouring, curing of concrete etc. complete including cost of metallic C Only
channel from work but excluding the cost of reinforcement in R.C.C. M
Trimix flooring work having average 150 mm thick wearing coat in RCC Road laid
as detail design & directed. The item of M 250 grade in Trimix flooring including
plant , machinery , tamping vibrating finishing curing for 21 days , creating
expansion joint and filling in joints with bitumen or other material as specified
etc complete with all lead and lift as directed by engineer in charge .
(Minimum cement level as per IS 456-2000 shall be adopted for concrete grade)
(C)Concrete Grade M-250
146 1094.76 Dewatering of TRI MIX M-250 floor concrete by means of vacuum dewatering 57.57 Rupees Fifty Seven And Smt
using floater machine and other necessary equipment , plant and labour etc Paise Fifty Seven Only
complete as directed by engineer in chrge
147 228.00 Core Cutting in RCC wall, beam, columns and slab at specific locations up to all 833.25 Rupees Eight Hundred Each
height of required size & depth and refilling , repairing , making it good with RCC Thirty Three And Paise
M20 etc complete as directed by engineer in charge .Size 100mm to 200mm Twenty Five Only
dia (average depth 150 mm to 450 mm)
148 42.00 Providing and fixing wsh down water closet (European type, W.C. Pan) with 1356.81 Rupees One Thousand Each
integral P or S trap including jointing the trap with soil pipe in Cement Mortar Three Hundred Fifty Six
1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid for And Paise Eighty One
separately)(A) vitreous China Pattern :(i) in white colour Only
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
149 36.00 Providing and fixing vitreous china dual purpose closet suitable for use as 10140.79 Rupees Ten Thousand Each
squatting pan or European type water closet (Anglo Indian W.C pan) with seat & One Hundred Forty And
lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing Paise Seventy Nine Only
cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with
specials of standard make and mosquito proof coupling of approved municipal
design complete, including painting of fittings and brackets, cutting and making
good the walls and floors wherever required: White vitreous china dual purpose
WC pan with white solid plastic seat and lid with white vitreous china flushing
cistern and C.P. flush bend etc complete
150 78.00 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. 2592.67 Rupees Two Thousand Each
brackets painted white including fixed with single 15 mm C.P. brass pillar cock , Five Hundred Ninety
32 mm dia C.P. brass waste coupling, 40 mm waste pipe, 15 mm dia flexible pipe Two And Paise Sixty
and 15 mm dia angle valve with all connection .(A) Vitreous China: (ii) Flat Back Seven Only
washbasin 550 mm x 400mm size. (i) In white colour.
151 42.00 Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white 2326.66 Rupees Two Thousand Each
including cutting holes in walls and making good the same but excluding fittings. Three Hundred Twenty
(C) Vitreous China Sink.(i) 600mm x 450mm x 150mm size Six And Paise Sixty Six
152 78.00 Providing and fixing chromium plated brass half turn flush cock of approved 263.77 Rupees Two Hundred Each
quality inc. fixing in pipeline complete. 25 mm Dia Sixty Three And Paise
Seventy Seven Only
153 114.00 Providing & fixing C.P. Brass screw down bib tap at all floor levels,polished 186.83 Rupees One Hundred Each
bright etc. comp. (A) 15mm dia. For all floors Eighty Six And Paise
Eighty Three Only
154 114.00 Providing and fixing pillar tap, capstan head, screw down high pressure with 308.73 Rupees Three Hundred Each
screws, shanks and back nuts. (i) 15mm dia Eight And Paise Seventy
155 72.00 Providing and fixing 15mm dia. brass screw down stop tap of approved quality 205.83 Rupees Two Hundred Each
including fixing in pipeline etc. complete as directed by Engineer In charge. Five And Paise Eighty
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
156 78.00 Providing and fixing chromium plated, bottle trap with necessary couplings of 295.80 Rupees Two Hundred Each
approved quality for wash basin Ninety Five And Paise
157 114.00 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar 104.34 Rupees One Hundred Each
and bush of approved quality and colour Four And Paise Thirty
158 78.00 Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia 67.91 Rupees Sixty Seven And Each
Paise Ninety One Only
159 78.00 Providing and fixing brass screw down stop tap.(B) 20mm dia. 223.81 Rupees Two Hundred Each
Twenty Three And Paise
Eighty One Only
160 78.00 Providing and fixing 600 mm x 450 mm beveled edge mirror of superior glass 859.41 Rupees Eight Hundred Each
mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs Fifty Nine And Paise
with C.P. brass screws and washers. Forty One Only
161 78.00 Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed 616.42 Rupees Six Hundred Each
to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size Sixteen And Paise Forty
162 78.00 Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 282.16 Rupees Two Hundred Each
100mm dia. Eighty Two And Paise
163 78.00 Providing and fixing 600mm x 120mm glass shelf with C.P. brass bracket and 542.84 Rupees Five Hundred Each
guard rail complete mixed to wooden plug with C.P. brass screws Forty Two And Paise
Eighty Four Only
164 150.00 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter 586.27 Rupees Five Hundred Each
with jali of the following nominal diameter of self cleansing design with C.I Eighty Six And Paise
scread down or hinged grating including the cost of cutting and making good the Twenty Seven Only
165 64.00 Providing and fixing S.W.gully trap with C.I.grating brick masonry chamber and 1292.19 Rupees One Thousand Each
water tight c.i. cover with frame of 300 mm x 300 mm size (inside )with standard Two Hundred Ninety
weight. (I) square month traps.150 mm x 100 mm size p with all lead and lift etc. Two And Paise Nineteen
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
166 34.00 constructing brick masonry chamber for under ground c.I. Inspection chamber 2932.93 Rupees Two Thousand Each
and band with bricks having crushing strength not less than 35 kg/cm2 in cm Nine Hundred Thirty Two
1:5. c.i. cover with frame (light duty) 455 mm x 610 mm internal dimension, And Paise Ninety Three
total weight of cover with frame to be not lass then 38 kg.weight of cover Only
23kg and wt. of frame 15 kg ) r.c.c top slab with 1:2:4 mix (1 cement:2 sand:4
aggregates 20 mm size) foundation concrete 1:5:10 ,in side plaster 15 mm thick
with cement mortar 1:3 finished smooth with a floating coat of neat cement on
walls and bed concrete etc. complete.) in side dimension 455 mm x 610 mm and
450 mm deep for single pipe.
167 22.00 Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand 19349.63 Rupees Nineteen Each
: 4-graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix Thousand Three
(1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm Hundred Forty Nine And
thick with Cement Mortar 1:5 (1-Cement : 5-coarse sand) finished with a floating Paise Sixty Three Only
coat of neat cement and making channels in cement concrete 1:2:4 mix (1-
Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth
complete including curing and festing (i) Inside size 900mm x 1200mm and
1.5M. deep including C.I. cover with frame size 560mm diameter total weight of
cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of
frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick having
crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1-
Cement: 5-Coarse sand) (2) B type depth 1.50 Metre for 150mm diameter
168 12.00 (II) Extra rate for constructing B.B. masonry for every additional depth of 0.1M. 397.19 Rupees Three Hundred Each
GR Part thereof over item No.24.27 (I) for depth from 1.50M. to 2.25M. Ninety Seven And Paise
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
169 324.00 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 72.65 Rupees Seventy Two And Rmt
40) for cold water including fittings as approved by Engineer In Charge. Pipe Paise Sixty Five Only
shall be fixed on the wall with the help of clamp at every two metre C/C or shall
be concelled as directed including necessary fittings etc. including testing of pipe
and joints and fixing the same with adhesive solvent, including cost of all
materials with all lead and lift etc.(A) 15 mm dia.
170 600.00 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 91.84 Rupees Ninety One And Rmt
40) for cold water including fittings as approved by Engineer In Charge. Pipe Paise Eighty Four Only
shall be fixed on the wall with the help of clamp at every two metre C/C or shall
be concelled as directed including necessary fittings etc. including testing of pipe
and joints and fixing the same with adhesive solvent, including cost of all
materials with all lead and lift etc. (c) 25 mm dia
171 850.00 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 148.12 Rupees One Hundred Rmt
40) for cold water including fittings as approved by Engineer In Charge. Pipe Forty Eight And Paise
shall be fixed on the wall with the help of clamp at every two metre C/C or shall Twelve Only
be concelled as directed including necessary fittings etc. including testing of pipe
and joints and fixing the same with adhesive solvent, including cost of all
materials with all lead and lift etc. (E) 40 mm dia.
172 600.00 providing & fixing to wall ceiling and floor 10 kg/f/cum working pressure 280.23 Rupees Two Hundred Rmt
polyethylene pipes of the following outside diameter ,low density complete with Eighty And Paise Twenty
special flange compression type fittings ,wall clamped making good wall ,cling Three Only
and floor with all lead and lift etc. - 75 mm dia
173 450.00 providing & fixing to wall ceiling and floor 10kg/f/cum working pressure 339.05 Rupees Three Hundred Rmt
polyethylene pipes of the following outside diameter ,low density complete with Thirty Nine And Paise
special flange compression type fittings ,wall clamped making good wall ,cling Five Only
and floor with all lead and lift etc. 110 mm dia
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
174 230.00 Providing and fixing to wall ceiling and floor galvanized mild steel tubes 921.68 Rupees Nine Hundred Rmt
(medium grade) of the following nominal bore , tube fitting and clamps Twenty One And Paise
including making good the wall ceiling and floor G I pipe80mm up to all floors Sixty Eight Only
with all lead and lift as directed by engineer in charge
175 60.00 Providing and fixing to wall ceiling and floor galvanized mild steel tubes 725.71 Rupees Seven Hundred Rmt
(medium grade) of the following nominal bore , tube fitting and clamps Twenty Five And Paise
including making good the wall ceiling and floor G I pipe 65 mm up to all floors Seventy One Only
with all lead and lift as directed by engineer in charge
176 108.00 Providing and fixing to wall ceiling and floor galvanized mild steel tubes 426.40 Rupees Four Hundred Rmt
(medium grade) of the following nominal bore , tube fitting and clamps Twenty Six And Paise
including making good the wall ceiling and floor G I pipe 40mm dia meter up to Forty Only
all floors with all lead and lift as directed by engineer in charge
177 108.00 Providing and fixing to wall ceiling and floor galvanized mild steel tubes 282.98 Rupees Two Hundred Rmt
(medium grade) of the following nominal bore , tube fitting and clamps Eighty Two And Paise
including making good the wall ceiling and floor G I pipe 25 mm dia meter up to Ninety Eight Only
all floors with all lead and lift as directed by engineer in charge
178 8.00 (B) Providing sock pit of 50 Cu.M. Volume including excavating and filling 34572.70 Rupees Thirty Four Each
brickbats with dry masonry work at top for 45cm. height including covering Thousand Five Hundred
the top with stone including providing vatas in C.M. 1:3 with finishing curing etc. Seventy Two And Paise
complete as directed. Seventy Only
179 115.20 Providing and laying (two level or slopes) and jointing with stiff mixture of 222.15 Rupees Two Hundred Rmt
cement mortar in proportion 1:1 ,salt glazed stone ware pipe following nominal Twenty Two And Paise
internal diameter including testing of pipes and joints etc. complete.with all lead Fifteen Only
and lift etc. (A) 100 mm dia.
180 115.20 Providing and laying (two level or slopes) and jointing with stiff mixture of 317.47 Rupees Three Hundred Rmt
cement mortar in proportion 1:1 ,salt glazed stone ware pipe following nominal Seventeen And Paise
internal diameter including testing of pipes and joints etc .complete with all lead Forty Seven Only
and lift etc. (B)150 mm dia
181 8.00 Providing and fixing Gun metal check or non-return fullway wheel valve with all 663.43 Rupees Six Hundred Sixty Each
lead and lift etc.(E) 40mm dia. Three And Paise Forty
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
182 8.00 Providing and fixing ball cock of approved. quality as directed with all lead and 189.84 Rupees One Hundred Each
lift etc.(B) Copper metal 50mm Eighty Nine And Paise
Eighty Four Only
183 24.00 Providing and fixing in position cowel went to pipes with all lead and lift etc. 495.91 Rupees Four Hundred Each
100mm Ninety Five And Paise
Ninety One Only
184 3.00 Making connection of galvanized Mild steel distribution branch with galvanized 933.69 Rupees Nine Hundred Each
mild steel main 50mm to 80mm nominal bore by providing and fixing tee Thirty Three And Paise
including cutting and threading the pipes complete. Sixty Nine Only
185 90.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 170.36 Rupees One Hundred Rmt
13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of Seventy And Paise Thirty
following dia. nominal bore tube fittings and clamps including making good the Six Only
wall, ceiling and floor etc. complete with all lead and lift etc..[A] 15 mm..
186 90.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 253.82 Rupees Two Hundred Rmt
13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of Fifty Three And Paise
following dia. nominal bore tube fittings and clamps including making good the Eighty Two Only
wall, ceiling and floor etc. complete.with all lead and lift etc. [C] 25 mm.
187 150.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 447.72 Rupees Four Hundred Rmt
13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of Forty Seven And Paise
following dia. nominal bore tube fittings and clamps including making good the Seventy Two Only
wall, ceiling and floor etc. complete. with all lead and lift etc. [E] 40mm.
188 72.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 660.58 Rupees Six Hundred Sixty Rmt
13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of And Paise Fifty Eight Only
following dia. nominal bore tube fittings and clamps including making good the
wall, ceiling and floor etc. complete. with all lead and lift etc. [F] 50 mm.
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
189 6.00 Construction Septic tank inside dimention of 3.00 m in length &1.50 m in width 47296.99 Rupees Forty Seven Each
& 2.25 m depth including excavating any type of soil as shown and mentioned in Thousand Two Hundred
the drawing,providing and laying 0.10 m thick plain cement concrete 1:4:8 ( 1 Ninety Six And Paise
cement : 4 coarse sand : 8 graded stone agg.) 40 mm thick IPS flooring at bottom Ninety Nine Only
with brick masonary 0.23 m thick walls CM 1:6 ( 1 cement : 6 coarse sand ) and
intermediate half brick masonary CM 1:4 & RCC Top slabs 0.12 m thick in 1:2:4
(1 cement : 2 coarse sand : 4 graded stone agg) including reinforcement as per
design and 15 mm thick cement plaster in CM 1:3 with floating coat of neat
cement slurry inside, top and around tank below 15 cm on ground level, Also
provide Two nos SFRC (Steel Fibre Reinforced concrete) cover with frame
(Medium duty) 455mm x 610mm internal dimensions etc complete as per
direction of Engineer in charge.
190 378.14 Pro. And fixing single layer waterproof gypsum board 12.5mm thick sections 606.95 Rupees Six Hundred Six Smt
using waterpro of board of size 1220mm x 1830mm x 8.0mm suspended by GI And Paise Ninety Five
suspender channel of size25 mm x 3 mm with inter mediate channelog size Only
18mm x 40mm x 0.8 mm at 1220mm center to center ceiling section of size
mm x 35 mm x 0.55mm at 457mm c/c and perimeter channel A of size 20mm x
27mm x 30mm x 0.5mm at edges & drops incl.paper tap sand sofit cleat, anchor
fastener, scoch bolt connecting cleat, joining compound top coat on ceiling incl.
makingnecy. opening for light fitting, diffuser etc. comp. as per detail drawing as
0 0.00 Campus Development 0.00 Rupees Nil 0 -
191 648.00 Providing and fixing decorative entrance gate made out of cast iron and various 207.05 Rupees Two Hundred Kg
mild steel tabular section combination . The Ornamental entrance gate should Seven And Paise Five
be fixed at compound wall including pattern and die making , cutting, welding, Only
grinding , fabrication ,fixing in position at compound wall with necessary
pedestal , bearing block and other locking arrangement . The entrance gate
should be painted with two coats of priming coat of paint, and two coat of oil
paint including minior civil work etc. complete. The decorative entrance gate
shall be as per detail design and instruction of engineer incharge.
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
192 97.29 Providing and laying Granular sub base 250mm thk. in required layer by 1199.88 Rupees One Thousand Cm t
providing coarse graded material Grading - I using B.T. M.C. metal 53 mm to One Hundred Ninety
26.5 mm at 35%, aggregate 26.5 to 4.75 mm at 45% and coarse sand at 20% Nine And Paise Eighty
[1.28 times loose volume / Cmt. of compacted volume], (CBR more than 30%) as Eight Only
per Table 400-2 of MORT&H gradation including conveying the material at site
of work, mixing and spreading in to grade and camber, watering and
consolidating at OMC with vibratory roller including the cost of materials,
labours etc. complete.
193 32.87 Providing and fixing pre-cast Rubber Dye /steel Dye interlocking concrete block 706.93 Rupees Seven Hundred Smt
60mm thick with grade of concrete M300 pnumatic compressed/ vibrated Six And Paise Ninety
mechanically and as per approved design Confirming to IS 15658 :2006 including Three Only
35mm Sand layer for levelling and filling the joint with sand inproper line and
level as per guidlines of IRC : SP 63-2018 etc. Complete.
194 918.62 Providing and fixing pre-cast concrete kerb stone of gray cement based concrete 374.92 Rupees Three Hundred Rmt
block 30cm length,30cm height and 15cm thick of M250 grade concret as per Seventy Four And Paise
approved design and including excavation for fixing inproper line and level,filling Ninety Two Only
the joint with C:M 1:3(1cement:3fine sand) etc complete.
195 93.45 Mixing and spreading of goods oil and mannure- Mixing earth and sludge or 31.28 Rupees Thirty One And Cmt
manure in the required proportion specified or directed by the Officer-in-charge Paise Twenty Eight Only
196 80.10 Good garden soil Supplying and stackingof good earth at siteincluding royalty 441.32 Rupees Four Hundred Cmt
and carriage up to 5km complete (earth measured in stacks will be reduced by Forty One And Paise
20% for payment Thirty Two Only
197 13.35 Cowdungmanure Supplying and stacking of well decayed cattle manure at site 211.84 Rupees Two Hundred Cmt
including royalty and carriage up to 5k.m. lead complete (cattle manure Eleven And Paise Eighty
measured in stacks will reduced by 8% for Payment). Four Only
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
198 100.00 Treeplantation: Digging holes in ordinary soil and refilling the same with the 37.45 Rupees Thirty Seven And Each
excavated earth mixedwith manure or sludge in the ratio of 2:1 by volume (2 Paise Forty Five Only
parts of stacked volume of earth after reduction by 20%: 1 part of stacked
volume of manure after reduction by 8%) flooding with water, dressing including
removal of rubbish and surplus earth, ifany,with all lead sand lifts (cost of
manure, sludge or extra good earth if needed to be paid for separately) 2.14.3
Holes 60 cm dia, and 60 cm deep
199 2.67 Preparation of beds for hedging and shrubbery by excavating 60 cm deep and 190.74 Rupees One Hundred Cmt
trenching the excavated base to a further depth of 30cm, refilling the excavated Ninety And Paise
earth after breaking clods andmixing with sludge or manure in the ratio of 8:1 (8 Seventy Four Only
parts of stacked volume of earth after reduction by 20 %: one part of stacked
volume of sludge or manure after reductionby 8%), flooding with water, filling
with earth if necessary,watering and finally fine dressing, leveling etc. including
stacking and disposal of materials declared unserviceable and surplus earth by
spreadingand leveling as directed,with in a lead of 50m, lift up to 1.5 m
complete (cost of sludge, manure or extra earth to be paid for separately
200 267.00 Providing & laying Selection no. 1 doob grass turf with earth 50mm to 60mm 74.89 Rupees Seventy Four Smt
thickness of existing ground prepared with proper level and ramming with And Paise Eighty Nine
required tools wooden and than rolling the surface with light roller make the Only
surface smoothen and light watering the same maintenance for 30 days or more
till the grass establish properly,as per direction of officer in charge
201 50.00 Plantation of Trees at site i/c watering and removal of unserveiceable material’s 6.25 Rupees Six And Paise Each
as per direction of officer in charge (excluding cast of plant & water) Twenty Five Only
202 50.00 Plantation of Shrubs, at site i/c watering and removal of unserveiceable 3.12 Rupees Three And Paise Smt
material’s as per direction of officer in charge (excluding cast of plant & water) Twelve Only
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
203 67.50 Providing laying (to level or slopes) and jointing reinforced concrete Light duty 192.91 Rupees One Hundred Rmt
non-pressure pipes I.S. class NP2 of the following internal diameter with collars Ninety Two And Paise
and butt ends prepared for collar joints including testing of joints complete.with Ninety One Only
all lead and lift etc. with all lead and lift etc.(B) 150mm
204 45.00 Providing laying (to level or slopes) and jointing reinforced concrete Light duty 462.58 Rupees Four Hundred Rmt
non-pressure pipes I.S. class NP2 of the following internal diameter with collars Sixty Two And Paise Fifty
and butt ends prepared for collar joints including testing of joints complete.with Eight Only
all lead and lift etc. with all lead and lift etc.(C) 300mm
0 0.00 U.G Tank 0.00 Rupees Nil 0 -
205 15.00 Painting Two coats over & including a priming coat on new steel and other metal 36.74 Rupees Thirty Six And Smt
surfaces with enamel paint, brushing interior to give an even shade including Paise Seventy Four Only
cleaning the surface of all dirt, dust and other foreign matter.
206 17.00 Painting Two coats (excluding priming coat) on new steel and other metal 92.20 Rupees Ninety Two And Smt
surfaces with enamel paint, brushing interior to give an even shade including Paise Twenty Only
cleaning the surface of all dirt, dust and other foreign matter.
207 4.30 Steel work, welded in built up sections framed work including cutting, hoisting, 5889.50 Rupees Five Thousand Qntl
fixing in position and applying a priming coat of read lead paint. (A)In beams and Eight Hundred Eighty
joists, channels angles Tees, flats, with connecting plates or angle cleats as in Nine And Paise Fifty Only
main and cross beams. Hip and jack rafters, purlins conneted to common rafters
208 64.00 Providing and laying white glazed tiles 6mm thick in flooring treads of steps and 868.55 Rupees Eight Hundred Smt
landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse Sixty Eight And Paise
sand ) finishing with flush pointing in white cement. Fifty Five Only
209 245.00 Providing and laying white glazed tiles 6mm thick in skrting risers of steps and 900.29 Rupees Nine Hundred Smt
dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed And Paise Twenty Nine
with white cement slurry Only
0 0.00 Percolation well 0.00 Rupees Nil 0 -
210 10.60 Providing & laying weep hole in Aburtments, and returns by using A.C. pipe of 56.13 Rupees Fifty Six And Rmt
100mm including laying in proper grede and jointing the completed as per Paise Thirteen Only
detailed specification
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
211 2.48 Providing and laying rubble for apron (each stone weighting not less than 40Kg.) 1083.81 Rupees One Thousand Cmt
including and packing and filing in the interstices with quarry-spalls. Eighty Three And Paise
Eighty One Only
212 1.98 Providing and laying - Fitter Media 600mm thick directed at the back of 1239.35 Rupees One Thousand cmt
abutments, returns and wing walls as per detailed specifications. Two Hundred Thirty Nine
And Paise Thirty Five
213 40.00 (a) Drilling of pilot bore hole 250/ 300 mm dia(b) Reaming of 250 mm dia pilot 847.39 Rupees Eight Hundred Rmt
bore to 550 mm dia bore hole Forty Seven And Paise
Thirty Nine Only
214 40.00 (b) Reaming of 250 mm dia pilot bore to 550 mm dia bore hole including 521.16 Rupees Five Hundred Rmt
assembling lowering housing casing, strainer pipes with gravel packing, clay Twenty One And Paise
balls packing etc. Sixteen Only
215 1.00 (c) Cement sealing by means of mud pump without cost of cement. 15014.66 Rupees Fifteen Job
Thousand Fourteen And
Paise Sixty Six Only
216 1.00 (d-a) Development of each water bearing zone coming across the depth of tube 25118.70 Rupees Twenty Five Job
well by lowering 100 mm dia drop line & 32 mm dia GI air line with suitable Thousand One Hundred
capacity air compressor for min. 06 running hours till the availability of sand free Eighteen And Paise
discharge Seventy Only
217 1.00 (d-b) Charges of air compressor of 900 cfm / 200 psi capacity for minimum 6 30916.10 Rupees Thirty Thousand Job
running hours. 06 running hours. Nine Hundred Sixteen
And Paise Ten Only
218 30.00 (a) Supply of 250 mm dia ERW blank pipes as per IS 4270 of min. 6.89 mm 1870.52 Rupees One Thousand Rmt
thickness . Eight Hundred Seventy
And Paise Fifty Two Only
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
219 10.00 (b) Supply of 250 mm dia cage type "V" wire wound low carbon galvanised 2133.12 Rupees Two Thousand Rmt
screen pipe. ( i ) Having size of 1.0 mm (Heavy Grade) One Hundred Thirty
Three And Paise Twelve
220 1.00 (c) Supply of misc. bore materials.1. M. S. bore clamps with 03 holes on either 2440.16 Rupees Two Thousand Pair
side with nuts & bolts of std. make and of suitable size. 900 mm x 100 mm x 16 Four Hundred Forty And
mm Paise Sixteen Only
221 1.00 2. Bore plug having 100 mm height made from 5 mm thick MS plate with 3 705.99 Rupees Seven Hundred No
holes at equal distance on circumference for nut bolts type locking arrangement Five And Paise Ninety
with nut bolts & lock nuts of std. make complete. Nine Only
222 1.00 3. M. S. bail plug having length of 0.45 mts from medium class pipe as per IS. 907.99 Rupees Nine Hundred No
Seven And Paise Ninety
223 1.00 4. Steel bent plates suitable to 250 mm diapipe of size 200 mm x 150 mm x 6 97.97 Rupees Ninety Seven No
mm. And Paise Ninety Seven
224 1.00 Supply of ISI mark cement 7128.58 Rupees Seven Thousand Tonn
One Hundred Twenty
Eight And Paise Fifty
225 9.35 Supply of well sorted "Sevaliya" gravels of size 4 mm to 6 mm including carting, 2295.73 Rupees Two Thousand Cmt
loading,unloading & stacking at site of work Two Hundred Ninety
Five And Paise Seventy
226 4.68 Supply of clay ball having size of 25 mm to 50 mm. 849.41 Rupees Eight Hundred Cmt
Forty Nine And Paise
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
227 1.00 Electro logging of bore hole. 14140.00 Rupees Fourteen Job
Thousand One Hundred
0 0.00 Borewell 0.00 Rupees Nil 0 -
228 120.00 (a) Drilling of pilot bore hole in all strata by mud flush DR Rig 250/ 300 mm dia. 865.57 Rupees Eight Hundred mtr.
Sixty Five And Paise Fifty
229 120.00 (b) Reaming of 250 mm dia pilot bore to 550 mm dia bore hole including 535.30 Rupees Five Hundred mtr.
assembling lowering housing casing, strainer pipes with gravel packing, clay Thirty Five And Paise
balls packing etc. Thirty Only
230 1.00 (c) Cement sealing by means of mud pump without cost of cement. 13405.73 Rupees Thirteen job
Thousand Four Hundred
Five And Paise Seventy
231 1.00 (d-a) Development of each water bearing zone coming across the depth of tube 28054.77 Rupees Twenty Eight job
well by lowering 100 mm dia drop line & 32 mm dia GI air line with suitable Thousand Fifty Four And
capacity air compressor for min. 06 running hours till the availability of sand free Paise Seventy Seven Only
232 1.00 (d-b) Charges of air compressor of 900 cfm / 200 psi capacity for minimum 6 27603.30 Rupees Twenty Seven job
running hours. 06 running hours. Thousand Six Hundred
Three And Paise Thirty
233 80.00 supply and delivery of ISI marked ERW M.S.pipes conforming to IS: 4270/2001 3605.70 Rupees Three Thousand mtr.
with latest amendment 250 mm dia (Min.7.10 mm thickness) Six Hundred Five And
Paise Seventy Only
234 40.00 supply and delivery of cage type Trapezoidal shape ( ' V ') wire wound low 3088.58 Rupees Three Thousand mtr.
carbon, Galvanized screen pipe and Stainless Steel Screen pipes, confirming IS: Eighty Eight And Paise
8110 Low carbon, Galvanized screen pipe 250 mm dia HEAVY ) 1.00mm Slot Fifty Eight Only
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
235 4.00 Clamp made from M.S. plate with 3 holes on either side with nuts & bolts of Std. 2287.92 Rupees Two Thousand Pair
Make and suitable size.900 mm X 100 mm X 16 mm flat suitable for 300 mm Two Hundred Eighty
dia.P Seven And Paise Ninety
236 2.00 Bore plug having 100 mm height made from M.S. plate with 3holes at equal 1161.62 Rupees One Thousand No.
distance on circumference for nut-bolts type,locking arrangement with nuts- One Hundred Sixty One
bolts & lock nuts of std. Make complete. Suitable for 250 mm dia pipe. And Paise Sixty Two Only
237 2.00 3. M. S. bail plug having length of 0.45 mts from medium class pipe as per IS. 1065.02 Rupees One Thousand No.
Sixty Five And Paise Two
238 2.00 4. Steel bent plates suitable to 250 mm diapipe of size 200 mm x 150 mm x 6 91.71 Rupees Ninety One And No.
mm. Paise Seventy One Only
239 1.10 Supply of ISI mark cement. 6365.02 Rupees Six Thousand Ton.
Three Hundred Sixty Five
And Paise Two Only
240 11.30 Supply of well sorted "Sevaliya" gravels of size 4 mm to 6 mm including carting, 2049.29 Rupees Two Thousand Cu.mt.
loading,unloading & stacking at site of work. Forty Nine And Paise
Twenty Nine Only
241 11.30 Supply of clay ball having size of 25 mm to 50 mm. 758.51 Rupees Seven Hundred CMT
Fifty Eight And Paise
242 1.00 Electro logging of bore hole. 18180.00 Rupees Eighteen job
Thousand One Hundred
243 1.00 Chemical analysis charges of water sample. 1010.00 Rupees One Thousand job
0 0.00 submersible pump set in borewell 0.00 Rupees Nil 0 -
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
244 2.00 Providing electric motor driven submersible pump set conforming to IS 8034- 44740.98 Rupees Forty Four No
1981 withmotor conforming to IS 9283-1979 workingat 3 phase, 400/440 volts, Thousand Seven
50 Hertz AC supply and 2900 rpm.Category : 6.1 Discharge : 510 LPM, Head : Hundred Forty And Paise
123 Mtrs, HP : 25 Category : 7.2 Ninety Eight Only
245 1.00 Providing ATS control panel board for 15 hp subnercible pump detail 24518.76 Rupees Twenty Four No
specification as per GWSSB R/C : ATS (A. T. S. from 21 to 30 HP) Thousand Five Hundred
Eighteen And Paise
Seventy Six Only
246 150.00 Providing flat PVC submersible cable of Size : 1 x 3 x 35 square mm copper cable 463.59 Rupees Four Hundred MTR
Sixty Three And Paise
Fifty Nine Only
247 120.00 Providing heavy duty GI column pipe threaded at both ends of 3 meters length 709.02 Rupees Seven Hundred MTR
conforming to IS 1239 (part-1) with coupling at one end and thread protector at Nine And Paise Two Only
other end. including all taxes, insurance, transportation, freight charges, octroi,
inspection charges, loading, unloading,( GWSSB CIVIL SOR) conveyance to
departmental stores, stacking etc. complete. Size 80 mm .
248 2.00 Providing support clamps of size 4450 mm X 65 mm X 10 mm flat suitable to 547.42 Rupees Five Hundred Pair
65/80 mmdia.Pipe Forty Seven And Paise
249 4.00 Providing following specials.(1) Heavy duty G. I. coupling of 100 mm length and 238.36 Rupees Two Hundred No
8 mm thickness and 8 TPI threaded as per IS with G. I. nipple 8 TPI threaded at Thirty Eight And Paise
one end & 11 TPI threaded at other end of 125mm length suitable to 80 mm dia. Thirty Six Only
250 2.00 bore plug 100 mm height made out of M S plate with 3 holes at equal distance 530.25 Rupees Five Hundred No
on cercrunferance for nut bolt type ;ocking arrangement with nuts bolt & lock Thirty And Paise Twenty
nut of standrand make from 5 mm thick M S plate suitble for 200 mm dia pipe Five Only
251 4.00 (3) Heavy duty 90 degree G. I. bend suitable to 80 mm dia. Pipe. 858.50 Rupees Eight Hundred No
Fifty Eight And Paise
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
252 1.00 Lowering of sub pump with required nos. and size of column pipes by means of 2222.00 Rupees Two Thousand No
proper chain pulley block and pipe wrenches after checking threads of each pipe Two Hundred Twenty
with coupling to take load of pump set and pipe assembly filled with water Two Only
Above 90 metersdepth including lead jointing.
0 0.00 horizontal mono sub pump set with associated accessories etc in Sump 0.00 Rupees Nil 0 -
253 2.00 Providing and fixing of horizontal monoser submersible pump set 3 phase 28257.78 Rupees Twenty Eight Set.
400/440, 50c/s A C supply & 2900 RPM category SM 4.5 ,12.5 HP of 1600 LPM Thousand Two Hundred
discharge & 26 mts. Head with necessary elecrtical motor etc complete as Fifty Seven And Paise
directed by engineer in charge - 4.5. Seventy Eight Only
254 35.00 Providing ISI mark GI pipes with coupling of medium duty as per IS 1239 /1990 780.73 Rupees Seven Hundred MTR.
including carting, loading & unloading etc. of 100 mm size. Eighty And Paise Seventy
255 1.00 Providing control panel board for above sub pump with 5 KVAR capacitor Type & 11043.34 Rupees Eleven Thousand No.
Range : Star / Delta (11 HP to 15 HP) Forty Three And Paise
Thirty Four Only
256 50.00 Providing flat PVC submersible copper cable of Size : 1 x 3 x 4 square mm. 68.73 Rupees Sixty Eight And MTR.
Paise Seventy Three Only
257 2.00 Providing and supplying ISI mark CI D/F Sluice Valves , Butterfly Valves & Reflux 2696.70 Rupees Two Thousand Pair
Valves of following class and diameter including all taxes, insurance, Six Hundred Ninety Six
transportation, freight charges, octroi, inspection charges, loading, unloading, And Paise Seventy Only
conveyance to departmental stores, stacking etc. complete. Sluice valves with ISI
mark only PN-1 With hand wheel /cap operated (PD type short body)80mm dia
258 2.00 Providing and supplying ISI mark CI D/F Sluice Valves , Butterfly Valves & Reflux 2898.70 Rupees Two Thousand No.
Valves of following class and diameter including all taxes, insurance, Eight Hundred Ninety
transportation, freight charges, octroi, inspection charges, loading, unloading, Eight And Paise Seventy
conveyance to departmental stores, stacking etc. complete. Sluice valves with ISI Only
mark only PN-1 With hand wheel /cap operated (PD type short body)100 mm dia
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
259 1.00 Providing & fitting GI specials such as bends,flanges, reducer, nipple, MS 5555.00 Rupees Five Thousand Job
hardware, rubber packings etc. with required excavation & refilling for Five Hundred Fifty Five
connection to pipe line etc. complete. Only
260 1.00 Providing TPIC switch fuse unit withneutral link for 415 volts, erected on 4545.00 Rupees Four Thousand No.
polished wooden block of 60 x 60 x 2.5 cm size of min. 63 amperes capacity with Five Hundred Forty Five
rewirable fuse of category II. Only
261 2.00 Erection, testing & commissioning of mono submersible pump set complete 9090.00 Rupees Nine Thousand Job
with fitting of valves, laying of pipes, cable jointing etc.complete job. Ninety Only
262 1.00 Providing & erecting funnel type earthing having earth plate of following size 3833.96 Rupees Three Thousand Job
buried in specifically prepared earth pit 03 mts. below ground with40 Kg Eight Hundred Thirty
charcoal & salt with alternate layers of charcoal & salt, 20 mm dia GI pipe with Three And Paise Ninety
funnel with wire mesh for watering & bricks masonary block, CI cover complete Six Only
as per para 7.3 of IS 3043 with necessary length of double copper 6 SWG wire
bolted with lug to the plate and covered in 12 mm dia. GI pipe 2.5 mts. long
complete connected to the nearest switchgear with end socket as perdirection &
duly tested by earth tester as per drawing with following specifications with 30 x
30 x 0.35 cms CI earth plate
0 0.00 Electrical works 0.00 Rupees Nil 0 -
263 813.00 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 582.77 Rupees Five Hundred Pt
(Green) both are of ISI marked 1.1 kV grade FRLS PVC insulated multi strand Eighty Two And Paise
copper wires up to 10 mtr length , in below type of pipe erected with 6A Seventy Seven Only
Modular type switch / bell push & accessories and earth continuity of following
type, erected on PVC / Metallic/Wooden box, single mounting base frame
covered with textured/metallic/white front plate modules erected on / in wall /
ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /
H.D.Connector as directed.(f) with medium class Rigid PVC pipe and accessories
erected concealed in wall/ceiling complete CAT III
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
264 40.00 Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & 200.99 Rupees Two Hundred Pt
earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 kV grade FRLS PVC And Paise Ninety Nine
insulated multi strand copper wires, in below type of pipe to be erected Only
complete with earth continuity and necessary connection with primary light
with accessories erected on Metal / PVC / wooden box covered with 3 mm
thick PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with
necessary Lamp holder / ceiling rose / H.D.Connector as directed. (j) in existing
pipe erected concealed in wall/ceiling complete - Cat. III
265 238.00 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both 809.01 Rupees Eight Hundred Pt
are of .ISI marked 1.1 kV Grade FRLS PVC insulated multi strand copper wires up Nine And Paise One Only
to 10 mtr length, in below type of pipe erected with 6A Modular type switch
and hum free EME step type electronic fan regulator mounted and accessories
with earth continuity of following type erected on PVC / Metallic/Wooden box,
single mounting base frame covered with textured/metallic/white front plate
modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling
rose / H.D.Connector as directed.(f) with medium class Rigid PVC pipe and
accessories erected concealed in wall/ceiling completecat III
266 195.00 Providing following type of Modular Type Accessories mounted with PVC / 151.50 Rupees One Hundred Pt
metallic/Wooden box, single mounting base frame covered with textured / Fifty One And Paise Fifty
metallic/white front plate , modules erected with necessary connections as per Only
site situation directed by Engineer In charge.(1)One No. SP 6 Amp. Cat. III
267 195.00 Providing following type of Modular Type Accessories mounted with PVC / 151.50 Rupees One Hundred Pt
metallic/Wooden box, single mounting base frame covered with textured / Fifty One And Paise Fifty
metallic/white front plate , modules erected with necessary connections as per Only
site situation directed by Engineer In charge.(2) One No 5 pin plug. Cat. III
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
268 170.00 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are 1046.36 Rupees One Thousand Pt
of ISI marked 1.1 kV grade FRLS PVC insulated multi strand copper wires up to Forty Six And Paise
10 mtr length, in below type of pipe erected complete with Modular type Thirty Six Only
switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with
appropriate front plate modules erected on / in wall / ceiling as per pipe erected
with following type of accessories.[III] For 16A Plug and 16 amp switch with 2-4
sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing wire from mcb d b board. (f)
with medium class Rigid PVC pipe and accessories erected concealed in
wall/ceiling complete Cat. III
269 306.00 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin 309.06 Rupees Three Hundred Pt
socket erected on PVC / Metallic/Wooden box, single mounting base frame Nine And Paise Six Only
covered with textured / metallic/white front plate modules erected on / in wall
/ ceiling with following type accessories cat III
270 400.00 Providing following type of Modular Type Accessories mounted with pvc / 25.25 Rupees Twenty Five And Ea.
metallic box, single mounting base frame covered with textured / metallic front Paise Twenty Five Only
plate , modules erected with necessary connection. As desired by Engineer In
charge. (7) Blank Plate Single
271 1740.00 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 78.78 Rupees Seventy Eight Mtr
stranded Copper conductor wire in following type of pipe to be erected And Paise Seventy Eight
concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS Only
PVC insulated stranded wire of green colour for earth continuity of following
size (a) with medium class Rigid PVC pipe and accessories(a) 2 wire 1.5 sq. mm
272 4120.00 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 104.03 Rupees One Hundred Mtr
stranded Copper conductor wire in following type of pipe to be erected Four And Paise Three
concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS Only
PVC insulated stranded wire of green colour for earth continuity of following
size (a) with medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
273 690.00 providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 140.39 Rupees One Hundred Mtr
stranded Copper conductor wire in following type of pipe to be erected in / on Forty And Paise Thirty
wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded Nine Only
wire of green colour for earth continuity of following size (a) with medium class
Rigid PVC pipe and accessories.(a) 2 wire 4 sq. mm
274 1540.00 providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 184.83 Rupees One Hundred Mtr
stranded Copper conductor wire in following type of pipe to be erected in / on Eighty Four And Paise
wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded Eighty Three Only
wire of green colour for earth continuity of following size (a) with medium class
Rigid PVC pipe and accessories(b) 2 wire 6 sq. mm
275 2000.00 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size 33.33 Rupees Thirty Three And Mtr
complete to be erected on/in wall or ceiling erected with necessary PVC fittings Paise Thirty Three Only
& Junction boxes fixed with adhesive solution & Clamps with following dia of
pipes, in approved manner as directed. (b) 25 mm
276 1920.00 Providing & Erecting approved make following size of TV Co-axial flexible cable 39.39 Rupees Thirty Nine And Mtr
comprising inner conductor of solid bare copper insulated with Foam PE & Paise Thirty Nine Only
Secondary conductor made of poly - Aluminium film bonded Al. Braids @
suitable coverage overall sheathed with black PVC insulation. (b) RG-6
277 8.00 Providing and erecting Sheet Steel powder coated MCB distribution board - flush 1492.78 Rupees One Thousand Ea.
/ surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Four Hundred Ninety
Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate Two And Paise Seventy
nos. of MCBs.(The DBs should be used of same company of MCB to be used) Eight Only
suitable for (A) single phase incoming and horizontal single phase outgoing (b)
sheet steel double door (IP-43) (iv)12 way
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
278 8.00 Providing and erecting Sheet Steel powder coated MCB distribution board - flush 1152.41 Rupees One Thousand Ea.
/ surface mounted fitted with busbar, neutral link, earth bar and DIN rail, One Hundred Fifty Two
Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate And Paise Forty One Only
nos. of MCBs.(The DBs should be used of same company of MCB to be used)
suitable for (A) single phase incoming and horizontal single phase outgoing (b)
sheet steel double door (IP-43) (iii)8 way
279 26.00 Providing and erecting Sheet Steel powder coated MCB distribution board - flush 885.77 Rupees Eight Hundred Ea.
/ surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Eighty Five And Paise
Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate Seventy Seven Only
nos. of MCBs.(The DBs should be used of same company of MCB to be used)
suitable for (A) single phase incoming and horizontal single phase outgoing (b)
sheet steel double door (IP-43) (ii)6 way
280 42.00 providing and erecting Approved make RCCBs conforming to IS: 12640 and 2458.34 Rupees Two Thousand Ea.
having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and Four Hundred Fifty Eight
suitable for operation on single phase 240 V,50Hz. having characteristic of quick And Paise Thirty Four
action & tripping with all advance feature & do not incorporate any electronic Only
component. for following Max. rating erected as directed (ii) 40Amps. DP Cat. III
281 232.00 providing and erecting Miniature circuit breaker single pole 6A to 25A suitable 123.22 Rupees One Hundred Ea.
to operate on 240 V A.C. system and having breaking capacity 10 KA to be Twenty Three And Paise
erected in existing box. confirming to IS 8828/1996 with ISI Mark CAT III Twenty Two Only
282 42.00 Providing & erecting 240 V MCB double pole switch for motor & inductive load 362.59 Rupees Three Hundred Ea.
(C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box Sixty Two And Paise Fifty
having following capacity (B) 40 Amp. CAT III Nine Only
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
283 309.00 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 427.23 Rupees Four Hundred Ea.
Watt assembled on single MCPCB, with housing used as a heat sink shall be Twenty Seven And Paise
made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die Twenty Three Only
cast powder coated and high U.V. & corrosion resistance with diffuser housed
in aluminium casted body with company mark/name 160V to 270V,Power
Factor more than 0.95, THD < 15 %, CCT 3000 K to 6500K,Luminaire efficacy>
lumens/watt ,LED driver efficiency > 85 %( fitting required LM-79 & LM-80
Certificates)(NOTE: Below description have shown ranges of Wattage capacity of
LED fittings.The Engineer incharge may select any wattage capacity between the
ranges shown.) (A) Square/ Circular shaped Surface/Recessed Mount Downlight
with provision for spring loaded mounting clips complete.IP20 (ii) 11-15 watts,
Surge-2 KV CAT III
284 381.00 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 373.70 Rupees Three Hundred Ea.
Watt assembled on single MCPCB, with housing used as a heat sink shall be Seventy Three And Paise
made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast Seventy Only
powder coated and high U.V. & corrosion resistance with diffuser with
company mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%,
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt ,LED LED driver efficiency > 85 % ( fitting
required LM-79 & LM-80 Certificates)(NOTE: Below description have shown
ranges of Wattage capacity of LED fittings.The Engineer incharge may select any
wattage capacity between the ranges shown.) (A) Tube Light with integral driver
(iv) 22-24 Watts, Surge - 2kV,IP-20, conventional 4 feet CAT III
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
285 20.00 Supplying and erecting LED street light / Flood light fittings with High power 2843.15 Rupees Two Thousand Ea.
White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency Eight Hundred Forty
more than 130 lm/w and corrosion free High pressure die cast aluminum Three And Paise Fifteen
housing with smooth finish powder coated and heat sink extruded aluminium Only
with diffuser and Polycarbonate optics/ lenses, with toughened glass with
company mark/name engraved or embossed 160 to 270 V,Power Factor more
than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire
efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79
& LM-80 certificates)(NOTE: Below description have shown ranges of Wattage
capacity of LED fittings.The Engineer incharge may select any wattage capacity
between the ranges shown.)(A) Street Light (IP-65), Surge protection -4KV
integral and ,Light must have 440VAC line supply with over-voltage protection.
(i) 36 - 47 watts
286 30.00 Providing & Erecting PVC surface or pendent mounting LED bulk type 9 watt 787.80 Rupees Seven Hundred Ea.
lighting fitting with electronic driver. And lumen output from luminaire 720 lm, Eighty Seven And Paise
input voltage range 90-300VAC, 50 Hz cool white (3000 to 6500k), in-built driver, Eighty Only
-20 Degree to +60 Degree working temperature, AL frame with beam angle
287 240.00 Providing & erecting Approved make Power Saving 45 - 50 Watt Ceiling Fan with 1948.29 Rupees One Thousand Ea.
double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm Nine Hundred Forty
sweep complete having 3blades with aluminium blades with , canopy & 30 cm. Eight And Paise Twenty
down rod erected with earthing.(Make shall be approved by Engineer in charge)) Nine Only
288 240.00 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the 108.07 Rupees One Hundred Ea.
RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S. Eight And Paise Seven
box / Heavy Duty PVC box complete erected concealed in Ceiling with necessary Only
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
289 6.00 Providing and erecting busbar chamber confirming to IS-375 fabricated from 16 5731.75 Rupees Five Thousand RMTR
G.M.S. sheet, dust & vermin proof having hinged door with rubber gasket and Seven Hundred Thirty
necessary busbar supports with Aluminium busbar having current density not One And Paise Seventy
more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped Five Only
with colour insulation tape for phase sequence, three phase & neutral each
suitable for following current capacity with necessary painting mounted on wall
or pedestal frame of required size with necessary connections.(B) Suitable for
200 Amp. capacity
290 6.00 Providing Approved make Triple Pole Metal Clad Switch Fuse Unit 415/500 V. 5812.55 Rupees Five Thousand Ea.
with HRC fuse of suitable load and neutral link confirming to IS.(c) 100 A/125 A Eight Hundred Twelve
.Cat-III And Paise Fifty Five Only
291 500.00 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand 366.63 Rupees Three Hundred MTR
Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in Sixty Six And Paise Sixty
existing trench / pipe of following size of cables; (C) 2 core 6 Sq. mm Three Only
292 180.00 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand /Solid 648.42 Rupees Six Hundred MTR
Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in Forty Eight And Paise
existing trench / pipe of following size of cables (E) 3 1/2 core 120 Sq.mm (70 Forty Two Only
Sq.mm 1/2 core)
293 90.00 Making trench in soft soil of suitable width of 90 cms deep for laying cable or 55.55 Rupees Fifty Five And MTR
locating the fault all over the run and backfilling the same and making the Paise Fifty Five Only
surface as normal ground.
294 150.00 Providing & laying approved make Double walled corrugated pipes (DWC) of 62.62 Rupees Sixty Two And MTR
polyethylene(conforming to IS 14930 II )with necessary connecting accessories Paise Sixty Two Only
of same material at required depth for laying of cable. below ground / road
surface for enclosing cable and back filling the same to make ground as per
original. (A) 50 mm Dia
295 12.00 Providing and, fixing heavy duty flange type brass cable gland with rubber ring 38.38 Rupees Thirty Eight And Ea.
for PVC insulated armoured cable complete with out going tails, insulating tape Paise Thirty Eight Only
etc for following size of cables.(A) 2 To 4 Core 6 Sq mm
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
296 12.00 Providing and, fixing heavy duty flange type brass double compression type 140.39 Rupees One Hundred Ea.
cable gland with rubber ring for PVC insulated armoured cable complete with Forty And Paise Thirty
out going tails, insulating tape etc for following size of cables. (E) 3 & 1/2 core Nine Only
297 140.00 Solderless crimping type Copper lugs conforming to IS suitable for cable of 8.08 Rupees Eight And Paise Ea.
following size evenly crimped with high pressure tool & connected to switchgear Eight Only
terminals with brass/cadmium plated nut bolts in an approved manner. (A)
298 60.00 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of 45.45 Rupees Forty Five And Ea.
following size evenly crimped with high pressure tool & connected to switchgear Paise Forty Five Only
terminals with brass/cadmium plated nut bolts in an approved manner. (G)
299 8.00 Providing and erecting 18 G. M.S. termination box outdoor type suitable for- 1.1 907.99 Rupees Nine Hundred Ea.
KV PVC insulated armoured cable complete erected with clamp, bolts, nuts etc. Seven And Paise Ninety
suitable of following size of cables. (B) 3 core 120/150/185 Sq.mm Nine Only
300 9.00 Providing and erecting required size HOT deep Galvanised iron strip for earthing 77.77 Rupees Seventy Seven KG
of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using proper clamp. And Paise Seventy Seven
301 9.00 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 794.87 Rupees Seven Hundred Mtr
Ninety Four And Paise
Eighty Seven Only
302 9.00 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 77.77 Rupees Seventy Seven KG
And Paise Seventy Seven
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
303 15.00 Supplying & erecting in earthpit of minimum bore dia. 225mm size approved 7095.25 Rupees Seven Thousand Ea.
make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043- Ninety Five And Paise
1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 80 Twenty Five Only
mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250
Micron galvanising, connection terminal dia of 14 mm with constant ohmic
value surrounded by highly conductive compound with high charge dissipation
suitable for following type of applications with chamber and heavy duty cover
(A)(approved make OEM has to submit test certificate including value of earth
resistance of installation duly stamped and signed by agency and officer
Incharge has to ensure the value of earthing resistane mentioned in test
Certificate) & having back filling compound of (B) Inner chemical (CCM
Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage
drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill
Compound :- Earthing compound should be capable to retain moisture for long
time Necessary test report must be submitted by Agency.[B] For Electrical
installation up to 11 KV located in other than normal soil i.e. Soft Rock,
Marshy Soil etc.
-Length of Pipe : 2 mtr
-Back filling Compound :1 no. Bag of 25 Kg.
304 3.00 Providing & erecting open well horizontal mono block pump set with cast iron 28586.03 Rupees Twenty Eight Ea.
body, complete for three phase submersible motor having [E] For 7.5 HP 3 Thousand Five Hundred
phase open well horizontal mono block pump set suitable for 1550 LPM to 370 Eighty Six And Paise
LPM @ 13.5 Mtr to 42 Mtr head suitable for 65/75 mm dia delivery pipe CAT II Three Only
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
305 3.00 Supplying & erecting approved make 3 phase motor control cubical panel ( Star - 12993.65 Rupees Twelve Ea.
Delta) made from16 G. CRCA sheet duly painted with epoxy powder painted Thousand Nine Hundred
inside and outside with hinged doors and locking arrangement, consisting of Ninety Three And Paise
suitable size of ON- OFF isolator (AC - 3/23 duty) main fuses, single phasing Sixty Five Only
preventer cum water level. Guard (Complete unit), Toggle switch to by pass
Single phase preventer cum WLG, indicating lamps for R- Y- B phases, over load
relay, Automatic water level controller, Ammeter & Voltmeter each with two
way selector switch incoming wires duly socket Crimped, Panel to be erected
on angle iron frame grouted on wall as directed. Star Delta & main contactor,
overload relay, thermal / Electronic Star delta cutoff timer, start - stop push
buttons. The isolator overload relay & contactors of L& T, Siemens or Cuttler
Hamer make only. Panel to be erected on angle iron frame ground on wall. (A)
306 3.00 Supplying & erecting approved make Automatic liquid level controller 6A. as per 2355.32 Rupees Two Thousand Ea.
instruction of Engineer in charge on site complete with wiring connection with Three Hundred Fifty Five
existing wires , with copper conductor from pump to upper and lower tank. And Paise Thirty Two
307 20.00 SITC of Vertical Air Termination Solid aluminium with Base- 10 mm dia and 1000 9416.23 Rupees Nine Thousand Ea.
mm long. Air Termination Base tested for conditioning, Ageing Test & Lightning Four Hundred Sixteen
impulse current withstand test: 100 kA of 10/350µs waveform in an accredited And Paise Twenty Three
Third party laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol with MAST Only
34mm dia 3000 mm long- Cold Galvanized
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
308 600.00 SITC of 8 mm dia solid Aluminium Conductor for roof top mesh grid and tested 299.97 Rupees Two Hundred Mtr
as per IEC 62561- 2 conducted in the Govt. accredited thirty party laboratory to Ninety Nine And Paise
meet the requirement of IS/IEC 62305 with Required Accessories - Aluminium Ninety Seven Only
Holding clamp at every 1 mtr distance, Aluminium/SS cross splicer at every
crossing of Alu. conductor, Expansion piece with connectors at every 20 mtr
distance, Aluminium straight Splicer to connect conductors. All Accessories
should be tested as per IEC 62561-1 2018 Cl. 6.3 for conditioning & Ageing Test
& 6.4 for Lightning impulse current withstand test: 100 kA of 10/350µs
waveform(Ageing & Electrical test ) conducted in a sequence manner & tested in
the Govt. accredited Third party laboratory to meet the requirements of IS/IEC
309 200.00 SITC of Galvanized Steel Flat 25x6 mm thickness from earth electrode directly in 154.53 Rupees One Hundred Mtr
ground as required. Zinc coating: 500 g/m square (Approx:70 micron coating) Fifty Four And Paise Fifty
tested and used exclusively for lightning protection earthing system and ring Three Only
equipotential bonding.
310 2.00 Supplying, Erecting, Testing & Commissioning the passenger / stretcher lift 1522206.35 Rupees Fifteen Lakh(s) Ea.
having following main features: [1] GEAR LESS LIFT DRIVE (MRL) comprising of Twenty Two Thousand
High Starting torque Lift 3 phase 440 V A. C. Permanent Magnet Synchronous Two Hundred Six And
motor of proper rating with high efficiency shall be used.[2] Micro processor Paise Thirty Five Only
based / PLC, ACVVVF, vector control drive with encoder feedback closed loop
system shall be used for lift car and door operation which shall be full collective
selective operation hall call demand response, UP/DOWN hall stops, Main, Up/
Down Contactor with overload and phase reversal relay and safety controls.
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
0 0.00 [3] Car with M S platform with bracings of adequate size and to sustain the 0.00 Rupees Nil 0 -
impact load cabin + passenger with safety factor of fire for steel and side panels
of Stainless steel of sheet of grade 304 duty. Car ceiling will be S.S. finishes with
aesthetic appearance with LED ceiling lights. Car flooring shall be of s/s
chaker plate design sugeested of engineer in charge. of engineer in charge. Car
doors shall be of stainless steel grade 304, hairline finish with centre opening /
telescopic automatic doors. Car panel will also be S.S. 304 finished with
emergency stop device, mechanical door safety device, facility of auto/ attended
mode. All car panel buttons and all floor switches must be with brail language as
per lift act. [4] All landing doors must be fire rated for 2 hour shall be fully
automatic centre opening/ telescopic opening made of hairline finish steel grade
of 304 with key holes and infrared curtains with Unlocking facility from outside
[5] Appropriate battery operated emergency light in the car along with alarm
switch shall be provided. Also, Emergency Light & Fan should start immediately
without any Time Delay as soon as power fails.
[6] Digital scrolling indicator system for up-down arrow along with floor position
indicator shall be provided inside the car and at all floors.
[7] Full height infra red curtain with multiple cross / crossing light beams shall be
[8] Automatic Rescue Device (ARD) shall be provided accordingly of passenger
capacity with Manual Rescue Operation ( Manual Cranking Facility).
[9] Audio visual indication in the lift car showing over loading shall be provided
such that doors kept open till excess load is removed.
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
0 0.00 [10] Spring buffers/PU Buffers shall be provided. 0.00 Rupees Nil 0 -
[11] Car fan as per passenger capacity with automatic sleep timer shall be
[12] Voice annunciator with suitable music shall be provided in lift car.
[13] Self diagnostics system for operational and safety parameters shall be
provided in control panel.
[14] Mechanical over speed governor with governor calibration as per actual site
parameters and submission of calibration certificate submission, door key holes
in the floor doors, fireman switch shall be provided.
[15] Lift machine hoisting arrangement in the lift machine room and monkey
ladder for lift pit should be provided by the lift agency, along with the other
steel structure works, foundations for the machine etc…
[16] In the hoist way fascia plate shall be provided without any extra cost, where
ever required as / if directed by engineer in charge.
0 0.00 4/5/6 Passengers, Ground plus 6 upper floors with Rated Speed of 1.5 / 1.75 0.00 Rupees Nil 0 -
m/sec., (B) With General Specification attached herewith. Cat.III
311 2.00 4/5/6 Passengers, Ground plus 3 upper floors with Rated Speed of 1.0 m/sec., 1317217.76 Rupees Thirteen Lakh(s) Ea.
(B) With General Specification attached herewith. Cat.III Seventeen Thousand
Two Hundred Seventeen
And Paise Seventy Six
0 0.00 Block E 0.00 Rupees Nil 0 -
312 1.00 Connection charges for Electricity supplying company including necessary liaison 202000.00 Rupees Two Lakh(s) Two LS
work & paying of the other charges for getting the new connection at project Thousand Only
0 0.00 Fire work 0.00 Rupees Nil 0 -
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
313 1.00 FIRE FIGHTING PUMPS:- Supply, installation, testing & commissioning of electric 299080.69 Rupees Two Lakh(s) Set
driven Hydrant & Sprinkler Pump suitable for automatic operation consisting of Ninety Nine Thousand
the following:Horizontal end suction centrifugal pump complete with Eighty And Paise Sixty
mechanical seal and including necessary arrangement for testing of pump Nine Only
Squirrel cage induction motor suitable for 415 V, 50 Hz, AC supply of suitable
rating for the above pump with synchronous speed of 2900 RPM T.E.F.C. type
and conforming to IP:55 and flexible coupling and coupling guard with the
pump. Common bed plate of fabricated mild steel channel or cast iron type.
Suitable reinforced cement concrete pump foundation including cushy foot
mounting, foundation bolts, washers as required. Suitable reinforced cement
concrete pump foundation including cushy foot mounting, foundation bolts,
washers as required. The pump shall be of the following
specifications:Discharge-2280 lpm,Head - 56 mtr No. of stage preferred -
Single / Double Speed RPM - 2900 Material of construction a) Impeller -
Bronze b) Casing - C.I. c) Shaft & Shaft Sleeve - SS-410 d) Bearing - Grease
Lubicated e) Seal & Make - Mechanical Type of pump - End suction HP
:- 45HP ( 35 KW.) ( Make :- KBL / M & P / GROUNDFOS / KSB.)
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
314 1.00 Supply, installation, testing & commissioning of electric driven Jockey Pump 74555.97 Rupees Seventy Four Set
suitable for automatic operation consisting of the following: Horizontally Thousand Five Hundred
mounted centrifugal end suction pump complete with mechanical seal and Fifty Five And Paise
including necessary arrangement for testing of pump.Squirrel cage induction Ninety Seven Only
motor suitable for 4440 V, 50 Hz, AC supply of suitable rating for the above
pump with synchronous speed of 2900 RPM T.E.F.C. type and conforming to
IP:55 and flexible coupling and coupling guard with the pump.Common bed
plate of fabricated mild steel channel or cast iron type.Suitable reinforced
cement concrete pump foundation including cushy foot mounting, foundation
bolts, washers as required.The pump shall be of the following
specifications:Discharge - 180 lpm Head - 56 m No. of stage preferred -
Multistage Speed RPM - 2900 Mover - Electric Motor Driven
Material of construction a) Impeller - Bronze b) Casing - C.I. c) Shaft
& Shaft Sleeve - SS-410 d) Bearing - Grease Lubicated e) Seal & Make -
Mechanical Type of pump - End suction HP:- 4.0 HP ( 3 KW.) ( Make :- KBL / M
& P / GROUNDFOS / KSB.)
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
315 1.00 Supply, installation, testing & commissioning of diesel engine Hydrant Pump 547234.26 Rupees Five Lakh(s) Set
suitable for automatic operation consisting of the following: Horizontal split Forty Seven Thousand
casing centrifugal pump complete with mechanical seal and including necessary Two Hundred Thirty Four
arrangement for testing of pump Water cooled Diesel Engine developing And Paise Twenty Six
suitable BHP at 1500 RPM for the Pump, common bed plate for mounting of Only
engine and pump, RCC foundation and vibration damping arrangement by Cushy
Foot and engine panel provided by engine manufacturer, connection to Engine
Starting Panel as per item (4), sealed maintenance free batteries of 24 V, 88 AH.
Rate shall include Exhaust pipe of required length with asbestos lagging, muffler,
day oil tank of 400 lts with first charge and manual oil pump set.Flexible
coupling and coupling guard with the Pump,Common bed plate of fabricated
mild steel channel or cast iron type.Suitable reinforced cement concrete pump
foundation including cushy foot mounting, foundation bolts, washers as
required. Engine panel Sealed maintenance free batteries of 24 V, 88 AH --2
Nos. (1 working + 1 standby)Exhaust pipe of required length with asbestos
lagging, muffler Day oil tank G.I.-pipe Metal) of 400 lts with first charge and
manual oil pump set and necessary piping and structural work to place tank at
upper level from pump in pump room,Discharge -2280 lpm, Head - 56 m No. of
stage preferred - Single / Double Speed RPM - 1450 Mover - Diesel engine
driven Material of construction a) Impeller - Bronze b) Casing - C.I. c) Shaft &
Shaft Sleeve - SS-410 d) Bearing - Grease Lubicated e) Seal & Make -
Mechanical Type of pump - END SUCTION ( Make :- KBL / M & P / GROUNDFOS /
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
316 1.00 Supply, installation, testing & commissioning of electric driven automatic fire 78218.51 Rupees Seventy Eight Set
booster Pump suitable for automatic operation consisting of the following: Thousand Two Hundred
Horizontal end suction centrifugal pump complete with mechanical seal and Eighteen And Paise Fifty
including necessary arrangement for testing of pump. Squirrel cage induction One Only
motor suitable for 415 V, 50 Hz, AC supply of suitable rating for the above pump
with synchronous speed of 2900 RPM T.E.F.C. type and conforming to IP:55 and
flexible coupling and coupling guard with the pump. Common bed plate of
fabricated mild steel channel or cast iron type. Suitable reinforced cement
concrete pump foundation including cushy foot mounting, foundation bolts,
washers as required. The pump shall be of the following specifications:
Discharge-450 lpm, Head - 35 m No. of stage preferred - Single / Double
Speed RPM - 2900 Material of construction a) Impeller - Bronze b) Casing- C.I. c)
Shaft & Shaft Sleeve - SS-410 d) Bearing - Grease Lubicated e) Seal & Make -
Mechanical ,Type of pump - End suction f) H.P.- 7 HP ( 5 KW.) ( Make :- KBL / M
& P / GROUNDFOS / KSB.)
317 3.00 Providing and fixing air vessel for fire pumps as per following specifications: 16606.80 Rupees Sixteen Each
Diameter - 250mm, Shell thickness - 8mm, Dish ends - 10mm, Height - Thousand Six Hundred
1200mm Finishing - Two coats of Red enamel paint of first grade over one coat Six And Paise Eighty Only
of primer externally & two coats of epoxy coating inside Material of
Construction - M.S. Test Pressure - 15 Kg./sq.cm., drain arrangmenet with 25mm
dia. dia gun metal wheel valve with required accessories etc. comp )
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
318 1.00 Fire Fighting Panel :- Fabrication, supply, Insallation testing & commissioning of 219788.84 Rupees Two Lakh(s) Set
Electrical control panel of cubical construction, floor mounted type, fabricated Nineteen Thousand
out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, Seven Hundred Eighty
dust and vermin proof, powder coated of approved shade after 7 tank Eight And Paise Eighty
treatment process, cable alley, interconnection with suitable size copper Four Only
conductor cable/solid copper strip, having switchgears and accessories,
mountings and internal wiring, earth terminals, numbering etc. complete in all
respect, suitable for main fire pump, pressurisation pump & diesel pump set
complete as per CPWD specification with following in coming and Outgoings,
suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure
protection class IP 42 as required : Including feeders earthing and paint shade as
per Fire norms and as per specifications.out going motor feeders to have
start/stop on / off /trip indication and current in all the phases. All out going
terminals brought to cable alleys. This panel should be painted in Red shade as
per local Fire Officer's norms, if any. INCOMING
250A, 50kA 4 Pole MCCB, Ics=100% Icu rating
Digital Voltmeter 0-500V with selector switch
Digital Ammeter (0-250 A) with selector swtich & CTs etc.LED type RYB phase
indicating lamps, ON, OFF, trip indicating lamps
Set of Copper Bus Bar 300A( Make:- L & T, Siemens, Schinder, ABB)
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
0 0.00 Main Fire Pump 0.00 Rupees Nil 0 -
125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter
suitable for 60 HP pump with overload protection, current sensing type single
phase preventor complete with all acceessories and internal wiring required for
automatic operation, selector switch for local/remote, auto/manual/OFF
63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta
starter with overload protection, current sensing type single phase preventor
complete with all acceessories and internal wiring required for automatic
operation, selector switch for local/remote, auto/manual/OFF operation.
DIESEL ENGINE CONTROL
Control for diesel engine comprising -
Automatic/Manual selctor switch & 3 attempts starting device, timers and relays
as required, push buttons, start/stop in manual mode
Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on
Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch,
0-30 V DC volt meter, and 0- 20 A DC Ammeter
All standard relays and accessories for automatic operation of diesel engine
System Controller
Designing, Supply, Installation, Testing and commissioning of system controller
to control operation of main electric fire pump, diesel pump, Pressurization
pump, Terrace pump in sequence as per specification consisting of relays,
timers. Sensors, annunciation window for fault indication, complete as per
specification ( Make:- L & T, Siemens, Schinder, ABB)
319 25.00 Providing and laying the PVC insulated & sheathed FRLS Armoured cables of 1.1 389.86 Rupees Three Hundred Metre
K.V. Aluminium Conductor 3 core x 70 sq.mm ) Eighty Nine And Paise
Eighty Six Only
320 25.00 Providing and laying the PVC insulated & sheathed FRLS Armoured cables of 1.1 154.53 Rupees One Hundred Metre
K.V. Aluminium Conductor 3 core x 10 sq.mm (cable from pump room to Fifty Four And Paise Fifty
terrace for booster pump) Three Only
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
321 15.00 Providing and laying the PVC insulated & sheathed FRLS Armoured cables of 1.1 208.06 Rupees Two Hundred Metre
K.V. Aluminium Conductor 3 core x 16 sq.mm (cable for jockey pump) Eight And Paise Six Only
322 3.00 Providing and fixing in position cable end termination glands for above 545.40 Rupees Five Hundred Nos.
mentioned cables 3 core x 70 sq.mm Forty Five And Paise
323 3.00 Providing and fixing in position cable end termination glands for above 285.83 Rupees Two Hundred Nos.
mentioned cables 3 core x 10 sq.mm (cable from Booster Pump to terrace Eighty Five And Paise
Remort Panel ) Eighty Three Only
324 2.00 Providing and fixing in position cable end termination glands for above 208.06 Rupees Two Hundred Nos.
mentioned cables 3 core x 16 sq.mm (cable for jockey pump) Eight And Paise Six Only
325 1.00 Providing, installation, testing, & commissioning of Remote Panel for fire 25969.12 Rupees Twenty Five No.
fighting terrace pump with push buttons for manual operation (the remote Thousand Nine Hundred
panel shall be located at ground level) all complete.( Sixty Nine And Paise
326 25.00 Supplying, laying and connecting of following size 1.1 kV grade copper 87.87 Rupees Eighty Seven And Metre
conductor armoured control cable on wall or on existing cable tray with Paise Eighty Seven Only
clamping, dressing or drawn in existing ducts all as required (For remote panel
for fire fighting terrace pump). 3 core x 6 sq.mm
327 3.00 Providing, installation, testing, & commissioning of pressure switches for 1429.41 Rupees One Thousand Each
Hydrant, Sprinkler, Standby and Jockey pump including necessary wiring upto Four Hundred Twenty
control panel & other materials.. Nine And Paise Forty
328 5.00 Providing and fixing fire retardent / extinguishing electrical insulated synthetic 1765.48 Rupees One Thousand Metre
mat of 5mm thick ±10% conforming to latest BIS doc no.-ET-02(5440) meeting Seven Hundred Sixty Five
requirements of IS 3043 / IS 5216 (Part I, II & III), IS 8437 & IEC 479 suitable for And Paise Forty Eight
all voltages not exceeding 3.3 KV AC supply and having minimum width of Only
1000mm ± 20mm and including supply of required quantity of adhsive /
compound and fixing the same at site as per site requirement
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
329 25.00 Fabricating and installing following size of perforated G.I.-pipe cable trays 363.60 Rupees Three Hundred Metre
including horizontal and vertical bends, reducers, tees, cross members and Sixty Three And Paise
other accessories as required and duly suspended from the ceiling with M.S. Sixty Only
suspenders including painting, etc., as required. 150mm width x 50mm depth x
1.6 mm thickness.
330 25.00 Providing & fixing 25 mm x 5 mm G.I.-pipe Strip in on surface or in recess for 124.23 Rupees One Hundred Metre
connections etc as required. Twenty Four And Paise
Twenty Three Only
331 15.00 Providing & fixing 25 mm x 5 mm G.I.-pipe Strip in 40 mm dia GI pipe from 51.51 Rupees Fifty One And Metre
earth electrode as required Paise Fifty One Only
332 15.00 SUCTION AND DELIVERY PIPES AND VALVES FOR FIRE FIGHTING PUMPS:- 292.90 Rupees Two Hundred Metre
Providing and fixing G.I.-pipe -Class- B Medium Duty suction & delivery Ninety Two And Paise
headers / pipes for fire fighting pumps (IS. 1239 heavy duty) including all fittings Ninety Only
like couplings, bends, elbows, offsets, blind flanges, plugs, tees, flanges (flanges
as per table E), etc. threaded or welded (all type) joints as per detailed
specfications as required, cutting holes and chases in brick or RCC walls or
floors and making good complete alongwith painting G.I.-pipe pipe with coat
of Red Oxide primer and two or more coats of synthetic enamel paint of
approved colour and quality to give an even shade including surface
preparation. 15 mm nominal bore
333 25.00 Providing and fixing G.I.-pipe -Class- B Medium Duty suction & delivery 608.57 Rupees Six Hundred Metre
headers / pipes for fire fighting pumps (IS. 1239 heavy duty) including all fittings Eight And Paise Fifty
like couplings, bends, elbows, offsets, blind flanges, plugs, tees, flanges (flanges Seven Only
as per table E), etc. threaded or welded (all type) joints as per detailed
specfications as required, cutting holes and chases in brick or RCC walls or
floors and making good complete alongwith painting G.I.-pipe pipe with coat
of Red Oxide primer and two or more coats of synthetic enamel paint of
approved colour and quality to give an even shade including surface
preparation. 25 mm nominal bore
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
334 35.00 Providing and fixing G.I.-pipe -Class- B Medium Duty suction & delivery 1295.88 Rupees One Thousand Metre
headers / pipes for fire fighting pumps (IS. 1239 heavy duty) including all fittings Two Hundred Ninety
like couplings, bends, elbows, offsets, blind flanges, plugs, tees, flanges (flanges Five And Paise Eighty
as per table E), etc. threaded or welded (all type) joints as per detailed Eight Only
specfications as required, cutting holes and chases in brick or RCC walls or
floors and making good complete alongwith painting G.I.-pipe pipe with coat
of Red Oxide primer and two or more coats of synthetic enamel paint of
approved colour and quality to give an even shade including surface
preparation. 80 mm nominal bore
335 35.00 Providing and fixing G.I.-pipe -Class- B Medium Duty suction & delivery 1647.67 Rupees One Thousand Metre
headers / pipes for fire fighting pumps (IS. 1239 heavy duty) including all fittings Six Hundred Forty Seven
like couplings, bends, elbows, offsets, blind flanges, plugs, tees, flanges (flanges And Paise Sixty Seven
as per table E), etc. threaded or welded (all type) joints as per detailed Only
specfications as required, cutting holes and chases in brick or RCC walls or
floors and making good complete alongwith painting G.I.-pipe pipe with coat
of Red Oxide primer and two or more coats of synthetic enamel paint of
approved colour and quality to give an even shade including surface
preparation. 100 mm nominal bore
336 35.00 Providing and fixing G.I.-pipe -Class- B Medium Duty suction & delivery 2253.67 Rupees Two Thousand Metre
headers / pipes for fire fighting pumps (IS. 1239 heavy duty) including all fittings Two Hundred Fifty Three
like couplings, bends, elbows, offsets, blind flanges, plugs, tees, flanges (flanges And Paise Sixty Seven
as per table E), etc. threaded or welded (all type) joints as per detailed Only
specfications as required, cutting holes and chases in brick or RCC walls or
floors and making good complete alongwith painting G.I.-pipe pipe with coat
of Red Oxide primer and two or more coats of synthetic enamel paint of
approved colour and quality to give an even shade including surface
preparation. 150 mm nominal bore
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
337 1.00 Providing and fixing G.I.-pipe -Class- B Medium Duty suction & delivery 5666.27 Rupees Five Thousand Metre
headers / pipes for fire fighting pumps (IS. 1239 heavy duty) including all fittings Six Hundred Sixty Six
like couplings, bends, elbows, offsets, blind flanges, plugs, tees, flanges (flanges And Paise Twenty Seven
as per table E), etc. threaded or welded (all type) joints as per detailed Only
specfications as required, cutting holes and chases in brick or RCC walls or
floors and making good complete alongwith painting G.I.-pipe pipe with coat
of Red Oxide primer and two or more coats of synthetic enamel paint of
approved colour and quality to give an even shade including surface
preparation. 200 mm nominal bore (6.0 thick min.)
338 3.00 Providing and fixing cast iron wafer type Butterfly valve of the following size 4627.17 Rupees Four Thousand Nos.
complete with bolts, nuts, washers and neoprene gaskets as per specifications. Six Hundred Twenty
80 mm nominal bore Seven And Paise
339 7.00 Providing and fixing cast iron wafer type Butterfly valve of the following size 6223.48 Rupees Six Thousand Nos.
complete with bolts, nuts, washers and neoprene gaskets as per specifications. Two Hundred Twenty
100 mm nominal bore Three And Paise Forty
340 3.00 Providing and fixing cast iron wafer type Butterfly valve of the following size 8334.21 Rupees Eight Thousand Nos.
complete with bolts, nuts, washers and neoprene gaskets as per specifications. Three Hundred Thirty
150 mm nominal bore Four And Paise Twenty
341 1.00 Providing and fixing cast iron wafer type Butterfly valve of the following size 13907.19 Rupees Thirteen Nos.
complete with bolts, nuts, washers and neoprene gaskets as per specifications. Thousand Nine Hundred
200 mm nominal bore Seven And Paise
342 3.00 Providing, installation, testing and commissioning of non-return valve of 10145.36 Rupees Ten Thousand Nos.
following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, One Hundred Forty Five
nuts,washers etc.as required : 100 mm nominal bore And Paise Thirty Six Only
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
343 1.00 Providing, installation, testing and commissioning of non-return valve of 7065.72 Rupees Seven Thousand Nos.
following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, Sixty Five And Paise
nuts,washers etc.as required : 80 mm nominal bore Seventy Two Only
344 3.00 Providing, installation, testing and commissioning of non-return valve of 16163.42 Rupees Sixteen Nos.
following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, Thousand One Hundred
nuts,washers etc.as required : 150 mm nominal bore Sixty Three And Paise
345 1.00 Providing, installation, testing and commissioning of non-return valve of 26444.88 Rupees Twenty Six Nos.
following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, Thousand Four Hundred
nuts,washers etc.as required : 200 mm nominal bore Forty Four And Paise
Eighty Eight Only
346 1.00 Providing and fixing reinforced Neoprene flexible pipe connectors with all 4692.46 Rupees Four Thousand Each
accessories on all pumps delivery.Suitable for 20 Kg/cm2 80mm ( Six Hundred Ninety Two
And Paise Forty Six Only
347 2.00 Providing and fixing reinforced Neoprene flexible pipe connectors with all 6451.88 Rupees Six Thousand Each
accessories on all pumps delivery.Suitable for 20 Kg/cm2 150mm Four Hundred Fifty One
And Paise Eighty Eight
348 2.00 Providing and fixing of nickel plated brass / nonferrous alloy fullyway ball valve 1173.62 Rupees One Thousand NO.
(minimum working pressure of 20 bar ) with operating handle of approved One Hundred Seventy
make. 25 mm nominal bore (Make:- Audco, Kartaar, Zoloto) Three And Paise Sixty
349 2.00 Providing and fixing of nickel plated brass / nonferrous alloy fullyway ball valve 645.39 Rupees Six Hundred NO.
(minimum working pressure of 20 bar ) with operating handle of approved Forty Five And Paise
make.15 mm nominal bore Thirty Nine Only
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
350 25.00 FIRE HYDRANT SYSTEM(External & Internal) (All Fire Fighting Hardware Should 608.57 Rupees Six Hundred Meter
be ISI Mark) :-Providing, fixing, jointing and testing heavy quality 'B' class Eight And Paise Fifty
Medium duty G.I. Pipe conforming to IS 3589/IS 1239 for pipes upto 150 mm Seven Only
dia. including forged threaded/socked(weldable) i.e. tees, bends, elbows,
unions, reducers, draining arrangement, flange joints, rubber insertion, nuts &
bolts etc. as required including fixing of pipework on walls, slabs etc. with M. S.
supports (duly painted), adjustible hangers. Note: Joints for pipes and fitttings
upto 50 mm diameter shall be threaded joints using Teflon Tape or equivalent
bonding tape on the threads. Joints for pipe and fittings above 50 mm diameter
shall be welded joints.Above ground pipe-with a coat of red oxide primer and
two or more coats of synthetic enamel paint of approved colour and Quality to
give an even shade including surface preparation. :- 25 mm dia
351 75.00 Providing, fixing, jointing and testing heavy quality 'B' class Medium duty G.I. 1295.88 Rupees One Thousand Meter
Pipe conforming to IS 3589/IS 1239 for pipes upto 150 mm dia. including forged Two Hundred Ninety
threaded/socked(weldable) i.e. tees, bends, elbows, unions, reducers, draining Five And Paise Eighty
arrangement, flange joints, rubber insertion, nuts & bolts etc. as required Eight Only
including fixing of pipework on walls, slabs etc. with M. S. supports (duly
painted), adjustible hangers. Note: Joints for pipes and fitttings upto 50 mm
diameter shall be threaded joints using Teflon Tape or equivalent bonding tape
on the threads. Joints for pipe and fittings above 50 mm diameter shall be
welded joints.Above ground pipe -with a coat of red oxide primer and two or
more coats of synthetic enamel paint of approved colour and Quality to give
an even shade including surface preparation.:- 80 mm dia
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
352 150.00 Providing, fixing, jointing and testing heavy quality 'B' class Medium duty G.I. 1767.50 Rupees One Thousand Meter
Pipe conforming to IS 3589/IS 1239 for pipes upto 150 mm dia. including forged Seven Hundred Sixty
threaded/socked(weldable) i.e. tees, bends, elbows, unions, reducers, draining Seven And Paise Fifty
arrangement, flange joints, rubber insertion, nuts & bolts etc. as required Only
including fixing of pipework on walls, slabs etc. with M. S. supports (duly
painted), adjustible hangers. Note: Joints for pipes and fitttings upto 50 mm
diameter shall be threaded joints using Teflon Tape or equivalent bonding tape
on the threads. Joints for pipe and fittings above 50 mm diameter shall be
welded joints.Above ground pipe -with a coat of red oxide primer and two or
more coats of synthetic enamel paint of approved colour and Quality to give
an even shade including surface preparation.:- 100 mm dia
353 50.00 Providing, fixing, jointing and testing heavy quality 'B' class Medium duty G.I. 2253.67 Rupees Two Thousand Meter
Pipe conforming to IS 3589/IS 1239 for pipes upto 150 mm dia. including forged Two Hundred Fifty Three
threaded/socked(weldable) i.e. tees, bends, elbows, unions, reducers, draining And Paise Sixty Seven
arrangement, flange joints, rubber insertion, nuts & bolts etc. as required Only
including fixing of pipework on walls, slabs etc. with M. S. supports (duly
painted), adjustible hangers. Note: Joints for pipes and fitttings upto 50 mm
diameter shall be threaded joints using Teflon Tape or equivalent bonding tape
on the threads. Joints for pipe and fittings above 50 mm diameter shall be
welded joints.Above ground pipe-with a coat of red oxide primer and two or
more coats of synthetic enamel paint of approved colour and Quality to give
an even shade including surface preparation. :- 150 mm dia (Make:- TATA/
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
354 75.00 Providing and laying of 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 1295.88 Rupees One Thousand Meter
1239 including all GI/MS fittings like couplings, bends, elbows, offsets, blind Two Hundred Ninety
flanges, plugs, tees, flanges (flanges as per table E), etc. threaded or welded (all Five And Paise Eighty
type ) joints as per detailed specfications as required, cutting holes and chases Eight Only
in brick or RCC walls or floors and making good complete with one coat of
mm thick 'PYPKOTE' or COATEK anti rust pipe protection including approved
primer & surface preparation of pipes as per manufacturers specifications and
lap of 25 mm to make an impermeable layer on G.I. Pipes in trenches or
underground pipes below soil all complete.Under ground pipe-with a coat of red
oxide primer and two or more coats of synthetic enamel paint of approved
colour and Quality to give an even shade including surface preparation.
mm dia(UNDERGROUND)
355 100.00 Providing and laying of 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 1647.67 Rupees One Thousand Meter
1239 including all GI/MS fittings like couplings, bends, elbows, offsets, blind Six Hundred Forty Seven
flanges, plugs, tees, flanges (flanges as per table E), etc. threaded or welded (all And Paise Sixty Seven
type ) joints as per detailed specfications as required, cutting holes and chases Only
in brick or RCC walls or floors and making good complete with one coat of
mm thick 'PYPKOTE' or COATEK anti rust pipe protection including approved
primer & surface preparation of pipes as per manufacturers specifications and
lap of 25 mm to make an impermeable layer on G.I. Pipes in trenches or
underground pipes below soil all complete.Under ground pipe-with a coat of red
oxide primer and two or more coats of synthetic enamel paint of approved
colour and Quality to give an even shade including surface preparation.
mm dia(UNDERGROUND)
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
356 50.00 Providing and laying of 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 2253.67 Rupees Two Thousand Meter
1239 including all GI/MS fittings like couplings, bends, elbows, offsets, blind Two Hundred Fifty Three
flanges, plugs, tees, flanges (flanges as per table E), etc. threaded or welded (all And Paise Sixty Seven
type ) joints as per detailed specfications as required, cutting holes and chases Only
in brick or RCC walls or floors and making good complete with one coat of
mm thick 'PYPKOTE' or COATEK anti rust pipe protection including approved
primer & surface preparation of pipes as per manufacturers specifications and
lap of 25 mm to make an impermeable layer on G.I. Pipes in trenches or
underground pipes below soil all complete.Under ground pipe :- 150 mm
dia(UNDERGROUND)with a coat of red oxide primer and two or more coats of
synthetic enamel paint of approved colour and Quality to give an even shade
including surface preparation.
357 12.00 Providing and fixing S.S landing valve conforming to IS -5290 with 63 mm dia 5676.54 Rupees Five Thousand Each
instantaneous female coupling on the outlet with S.S. orifice flange 6 mm thick Six Hundred Seventy Six
as required to maintain 3.5 Kg/sq.cm., blank cap and chain, necessary And Paise Fifty Four Only
companion flanges ( as per table "E") nuts, bolts, washer and gasket complete
as per specification. (ISI marked) Single outlet (
358 12.00 Providing and fixing first aid fire hose reel drum wall mounting, swinging 8080.00 Rupees Eight Thousand Each
type fitted with 20 mm dia 30.0 m long high pressure hose to I.S. 5132 Eighty Only
with 25 mm outlet gunmetal nozzle with shut off valve (I.S. 884-1969). Name
of Manufacturer should be embossed on the drum.
359 12.00 Providing and fixing 63 mm dia 15m long EPDM lined fabric lined hose 3994.64 Rupees Three Thousand Each
including SS male and female instantaneous type coupling approved by fire Nine Hundred Ninety
authority, machine wound with copper wire complete in all respects.Hose shall Four And Paise Sixty
conform to IS 636 TypeII and coupling to IS 903 -1975 (ISI marked) Four Only
360 12.00 Providing and fixing standard short size SS branch pipe with gunmetal nozzle 20 2911.88 Rupees Two Thousand Each
mm dia outlet with standard instantaneoustype 63 mm dia coupling. (conform Nine Hundred Eleven
to IS-903). And Paise Eighty Eight
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
361 12.00 Providing and fixing standard fireman's axe ( tested for 20000 Volts) with heavy 1114.03 Rupees One Thousand Each
insulated rubber handle.( ISI marked)( One Hundred Fourteen
And Paise Three Only
362 8.00 Providing and fixing gunmetal single acting air release valve with screwed inlet 2463.39 Rupees Two Thousand Each
25 mm dia. . Four Hundred Sixty
Three And Paise Thirty
363 12.00 Providing and fixing brass ball valve (full bore type) with plastic coated lever and 1114.03 Rupees One Thousand Each
screwed female ends tested to 20 Kg/ cm2 of approved quality as One Hundred Fourteen
specified.20mm . And Paise Three Only
364 12.00 Providing and fixing brass ball valve (full bore type) with plastic coated lever and 1466.52 Rupees One Thousand Each
screwed female ends tested to 20 Kg/ cm2 of approved quality as specified. Four Hundred Sixty Six
25 mm dia . And Paise Fifty Two Only
365 12.00 Providing and fixing door with frame for all internal fire hydrants fabricated 13490.57 Rupees Thirteen Each
from 16 SWG Alumunim of size 750 x 1200 x2100 mm double door including 2 Thousand Four Hundred
nos allen key lock for locking along with padlock arrangement & fully glazed Ninety And Paise Fifty
with 4 mm thick float glass approved by local Fire Authority, stove enameled Seven Only
fire red finish with " fire hose' written on front suitable to house 15 mm long
four length of canvas hose with couplings,one no of branch pipe, one fire mans
axe and two numbers of portable extinguishers, first aid fire hose and supports
for hoses, branch pipes, Axe and hose reel. as per approved design including
necessary fixing arrangement for hoses & axe and branch pipe.) FOR INTERNAL.
366 12.00 Providing and fixing dial type pressure gauge with isolation cock and chrome 1173.62 Rupees One Thousand Each
coated copper pipe at hydrant station. Dial diameter 100 mm calebration 0-15 One Hundred Seventy
kg/ sq.cm.. Three And Paise Sixty
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
367 12.00 Providing and fixing cast iron wafer type Butterfly valve -PN-1.6-of the following 4627.17 Rupees Four Thousand Each
size complete with bolts, nuts, washers and neoprene gaskets as per Six Hundred Twenty
specifications. 80 mm dia Seven And Paise
368 2.00 Providing and fixing cast iron wafer type Butterfly valve-pn-1.6- of the following 8334.21 Rupees Eight Thousand Each
size complete with bolts, nuts, washers and neoprene gaskets as per Three Hundred Thirty
specifications. 150 mm dia Four And Paise Twenty
369 2.00 Providing and fixing cast iron dual plate wafer type non return valves. 150 mm 16163.42 Rupees Sixteen Each
dia Thousand One Hundred
Sixty Three And Paise
370 1.00 Providing and fixing gunmetal fire brigade inlet head as per IS:904 6215.78 Rupees Six Thousand No.
Specification tested for 20 Kg/cm2 with 63 mm dia instantaneous type inlet and Two Hundred Fifteen
150mm dia. flanged outlet with built-in check valve for fire brigade connection And Paise Seventy Eight
to under ground tanks and fire risers including campanion flanges as pertable " Only
E" including nuts, bolts & washers etc. Four way
371 1.00 Providing and fixing gunmetal fire brigade inlet head as per IS:904 12684.92 Rupees Twelve No.
Specification tested for 20 Kg/cm2 with 63 mm dia instantaneous type inlet and Thousand Six Hundred
150mm dia. flanged outlet with built-in check valve for fire brigade connection Eighty Four And Paise
to under ground tanks and fire risers including campanion flanges as pertable " Ninety Two Only
E" including nuts, bolts & washers etc. Two way (
372 1.00 Providing and fixing suction coupling for fire brigade drawl of water from tank 26395.34 Rupees Twenty Six Each
with 150 mm dia GI (Medium) pipe and foot valve . ) Thousand Three
Hundred Ninety Five And
Paise Thirty Four Only
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
373 4.00 Providing, fixing ,testing and commissioning external (yard) hydrant "STAND- 5676.54 Rupees Five Thousand Each
POST" type conforming to IS:908-1975 and comprising of stand post for single Six Hundred Seventy Six
outlet of hot diped class ' C' G.I.-pipe Pipe of 100 mm dia at the with And Paise Fifty Four Only
instantaneous spring lock type Stainless steel female coupling of 63 mm dia for
connecting to hose pipe, single headed SS valves conforming to type A of IS:
5290-1977, GI tee tapping from underground mains, flange riser and any other
accessories etc. as per specification complete as required. (
374 12.00 Providing and fixing fire hose cabinet fabricated from 16 gauge M.S.sheet with 5064.14 Rupees Five Thousand Each
locking arrangement and hanging arrangement for accessories painted "Fire Sixty Four And Paise
Red" with Stove enameled paint "Fire Hose" written on front including Fourteen Only
suitable supports to place 900 mm above ground level properly anchored,
approximately size 800 X 600 X 250 mm deep (to house two lengths of canvas
hose with couplings, branch pipe with nozzle for external hydrants) FOR
375 150.00 SPRINKLER SYSTEM :- Providing and fixing 'B' class Medium duty G.I. Pipe 608.57 Rupees Six Hundred Meter
conforming to IS 3589/IS 1239 complete with GI / MS fittings like couplings, Eight And Paise Fifty
bends, elbows, tees, offsets,reducers, flanges as per table 'E' etc. including Seven Only
cutting and making good the walls complete.Pipes upto 50 mm dia threaded
joint with holdtite, 65 mm dia and above should be welded joint (all type).with
one coat of red oxide primer and two or more coats of synthetic enamel paint of
approved colour to give an even shade including surface preparations. :- 25 mm
376 50.00 Providing and fixing 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 671.91 Rupees Six Hundred Meter
1239 complete with GI / MS fittings like couplings, bends, elbows, tees, Seventy One And Paise
offsets,reducers, flanges as per table 'E' etc. including cutting and making good Ninety One Only
the walls complete.Pipes upto 50 mm dia threaded joint with holdtite, 65 mm
dia and above should be welded joint (all type).with one coat of red oxide
primer and two or more coats of synthetic enamel paint of approved colour to
give an even shade including surface preparations. :-32 mm dia
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
377 75.00 Providing and fixing 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 826.83 Rupees Eight Hundred Meter
1239 complete with GI / MS fittings like couplings, bends, elbows, tees, Twenty Six And Paise
offsets,reducers, flanges as per table 'E' etc. including cutting and making good Eighty Three Only
the walls complete.Pipes upto 50 mm dia threaded joint with holdtite, 65 mm
dia and above should be welded joint (all type).with one coat of red oxide
primer and two or more coats of synthetic enamel paint of approved colour to
give an even shade including surface preparations. :-40 mm dia
378 50.00 Providing and fixing 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 912.42 Rupees Nine Hundred Meter
1239 complete with GI / MS fittings like couplings, bends, elbows, tees, Twelve And Paise Forty
offsets,reducers, flanges as per table 'E' etc. including cutting and making good Two Only
the walls complete.Pipes upto 50 mm dia threaded joint with holdtite, 65 mm
dia and above should be welded joint (all type).with one coat of red oxide
primer and two or more coats of synthetic enamel paint of approved colour to
give an even shade including surface preparations. :-50 mm dia
379 25.00 Providing and fixing 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 1138.39 Rupees One Thousand Meter
1239 complete with GI / MS fittings like couplings, bends, elbows, tees, One Hundred Thirty
offsets,reducers, flanges as per table 'E' etc. including cutting and making good Eight And Paise Thirty
the walls complete.Pipes upto 50 mm dia threaded joint with holdtite, 65 mm Nine Only
dia and above should be welded joint (all type).with one coat of red oxide
primer and two or more coats of synthetic enamel paint of approved colour to
give an even shade including surface preparations. :-65 mm dia
380 25.00 Providing and fixing 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 1295.88 Rupees One Thousand Meter
1239 complete with GI / MS fittings like couplings, bends, elbows, tees, Two Hundred Ninety
offsets,reducers, flanges as per table 'E' etc. including cutting and making good Five And Paise Eighty
the walls complete.Pipes upto 50 mm dia threaded joint with holdtite, 65 mm Eight Only
dia and above should be welded joint (all type).with one coat of red oxide
primer and two or more coats of synthetic enamel paint of approved colour to
give an even shade including surface preparations. :-80 mm dia
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
381 25.00 Providing and fixing 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 1647.67 Rupees One Thousand Meter
1239 complete with GI / MS fittings like couplings, bends, elbows, tees, Six Hundred Forty Seven
offsets,reducers, flanges as per table 'E' etc. including cutting and making good And Paise Sixty Seven
the walls complete.Pipes upto 50 mm dia threaded joint with holdtite, 65 mm Only
dia and above should be welded joint (all type).with one coat of red oxide
primer and two or more coats of synthetic enamel paint of approved colour to
give an even shade including surface preparations. :-100 mm dia
382 1.00 Providing and fixing 'B' class Medium duty G.I. Pipe conforming to IS 3589/IS 2253.67 Rupees Two Thousand Meter
1239 complete with GI / MS fittings like couplings, bends, elbows, tees, Two Hundred Fifty Three
offsets,reducers, flanges as per table 'E' etc. including cutting and making good And Paise Sixty Seven
the walls complete.Pipes upto 50 mm dia threaded joint with holdtite, 65 mm Only
dia and above should be welded joint (all type).with one coat of red oxide
primer and two or more coats of synthetic enamel paint of approved colour to
give an even shade including surface preparations. :-150 mm dia
383 25.00 Providing and fixing 15 mm gunmetal sprinkler head with quartz bulb and set 512.70 Rupees Five Hundred Nos
to operate at specified temperature pendent/ upright/ side wall as per Twelve And Paise
instruction and fixing with loctite. Pendent Type 68 C Seventy Only
384 5.00 Providing and fixing 15 mm gunmetal sprinkler head with quartz bulb and set 598.30 Rupees Five Hundred Nos
to operate at specified temperature pendent/ upright/ side wall as per Ninety Eight And Paise
instruction and fixing with loctite. Side Wall Type 68 C Thirty Only
385 5.00 Providing and fixing 15 mm gunmetal sprinkler head with quartz bulb and set 512.70 Rupees Five Hundred Nos
to operate at specified temperature pendent/ upright/ side wall as per Twelve And Paise
instruction and fixing with loctite. Upright Type 68 C Seventy Only
386 26.00 Rossete Plate:-Providing, installation, testing & commissioning of 225.97 Rupees Two Hundred Nos
adjustable rosette plate for 15mm dia in white finish UL Twenty Five And Paise
Listed or FM approved complete as required. Ninety Seven Only
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
387 5.00 Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL 1540.68 Rupees One Thousand Nos
Listed) of stainless steel complete with 15 NPT on reducer thread with maximum Five Hundred Forty And
working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line Paise Sixty Eight Only
(Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female
thread with reducer, nipple, 2 side brackets, center bracket, stockbar of
following sizes complete as required.1200mm
388 1.00 Providing & fixing 25mm dia gunmetal inspecting & testing assembly with ball 3636.00 Rupees Three Thousand Each
valve(3 nos.), gunmetal sight glass, by pass valve & connected to drain line. ( Six Hundred Thirty Six
389 2.00 Providing and fixing brass ball valve full bore type with plastic coated lever 4105.65 Rupees Four Thousand Each
approved quality, tested to 20 Kg.cm.sq. 40 mm dia One Hundred Five And
Paise Sixty Five Only
390 2.00 Providing and fixing brass ball valve full bore type with plastic coated lever 4458.14 Rupees Four Thousand Each
approved quality, tested to 20 Kg.cm.sq. 50 mm dia ( Four Hundred Fifty Eight
And Paise Fourteen Only
391 5.00 Providing and fixing cast iron wafer type Butterfly valve-PN-1.6- of the following 6223.48 Rupees Six Thousand Each
size complete with bolts, nuts, washers and neoprene gaskets as per Two Hundred Twenty
specifications. :- 100 mm nominal bore ( Three And Paise Forty
392 2.00 Providing and fixing cast iron wafer type Butterfly valve -PN-1.6-of the following 4033.15 Rupees Four Thousand Each
size complete with bolts, nuts, washers and neoprene gaskets as per Thirty Three And Paise
specifications. :- 65 mm nominal bore ( Fifteen Only
393 1.00 Providing and fixing electricaly operated flow indicating switches model 6906.52 Rupees Six Thousand Each
System Sensor in sprinkler branch line on each floor with necessary junction box Nine Hundred Six And
installed in accessible place (Wiring from switches to panel and stair case Paise Fifty Two Only
pressurisation not included) :- 100 mm dia
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
394 2.00 Providing and fixing dial type pressure gauge with isolation cock and copper 1173.62 Rupees One Thousand Each
pipe on main header Dial diameter 100 mm celebration 0-15 / sq. cm. One Hundred Seventy
Three And Paise Sixty
395 2.00 Providing and fixing 25 mm dia single acting air release valve with screwed inlet.. 2463.39 Rupees Two Thousand Each
Four Hundred Sixty
Three And Paise Thirty
396 1.00 Providing and fixing cast iron dual plate wafer type non return valves. :- 150 mm 16163.42 Rupees Sixteen Each
dia . Thousand One Hundred
Sixty Three And Paise
397 2.00 Providing and fixing cast iron dual plate wafer type non return valves.:- 100 mm 10145.36 Rupees Ten Thousand Each
dia . One Hundred Forty Five
And Paise Thirty Six Only
398 1.00 Providing, Installation, testing and commissioning of Control Valve inclusive of: - 43485.64 Rupees Forty Three Each
150 mm dia butterfly Valve,Alarm Valve with Water Motor Gong, Pressure Thousand Four Hundred
gauge and other miscellaneous Valves and fittings as required. Eighty Five And Paise
Sixty Four Only
399 2.00 Fire Resistant Door Double Leaf Hinge Type (2 Hour Fire Rated) 1.00 mm thick GI 25138.90 Rupees Twenty Five No
Sheet cladded 40mm thick shutter complete with GI frame (Single Ribet – Frame Thousand One Hundred
Profile 100 x 57mm) made from 1.20mm thick GI Sheet & Fixing arrangements Thirty Eight And Paise
AS PER BS 476 PART- 20 & 22 & IS: 3614 Part - II for Integrity, Stability.Door Size: Ninety Only
2000mm (W) x 2100mm (H) Including below Accessories S.S. Ball Bearing Hinges-
6 Nos Vision Panel with Fire Glass of Size: 200 x 300mm - 2 Nos Heavy Duty
Door Closer - 2 Nos Heavy Duty Door Closer - 2 Nos Panic Exit Device for Double
Leaf Door - 1 No. External Trim Bar (Panic Latch) - 1 No.
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
400 15.00 HAND APPLIANCES :- Providing and fixing ABC type fire extinguishers consisting 5279.27 Rupees Five Thousand Each
of welded MS cylindrical body, squeeze lever discharge valve fitted with Two Hundred Seventy
pressure indicating gauge internal discharge tube, 30 cms long high pressure Nine And Paise Twenty
discharge hose, discharge nozzle, suspension bracket, conforming to ISI finished Seven Only
externally with red enamel paint and fixed to wall with brackets complete with
internal charge. Capacity 6.0 kg. I.S.I. Marked.(
401 1.00 Providing and fixing Trolley type foam fire extinguishers cap. 50 liters. 50 litres 16101.42 Rupees Sixteen Each
capacity Thousand One Hundred
One And Paise Forty Two
402 15.00 Providing and fixing in position Co2 gas type fire extinguishers of 4.5 kg. capacity 6451.88 Rupees Six Thousand Nos.
each.( Four Hundred Fifty One
And Paise Eighty Eight
403 1.00 Providing and fixing Trolley type Co2 gas fire extinguishers cap. 9 liters will be 7625.50 Rupees Seven Thousand Nos.
provided for transformer area.( Six Hundred Twenty Five
And Paise Fifty Only
404 12.00 Providing and keeping in position standard sand buckets filled with clean sand 935.26 Rupees Nine Hundred Nos.
and painted red from outside at various places.( Thirty Five And Paise
Twenty Six Only
405 12.00 Providian’s Escape Sigane:- Photoluminescent rigid plastic, 2mm thickness, 2545.20 Rupees Two Thousand Nos.
printed on high quality glass paint with UV resistance, 5 year warranty, material Five Hundred Forty Five
used-non radioactive, non-phophorous, non toxic and lead free. Available in And Paise Twenty Only
different types & sizes, time after removing the light source (in minutes):-
minutes, luminescent intensity(milicandelas*per square meter-mcd/sqm):30
mcd/sqm. Luminescent intensity greater than 0.32 mcd/sqm, period of light
decay* (in minutes) :3100 (1) “Fire Exits” ( Size 365 x 119 x 84 mm or nearest )
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
406 12.00 (2)Fire exit signs of standard size ( Size 450 x 200 x 84 mm or nearest ) 4675.29 Rupees Four Thousand Nos.
(photoluminous type.(glowing in dark type)Providing and fixing portable fire Six Hundred Seventy Five
extinguishers of approved make ISI marked of following Capacity at the places And Paise Twenty Nine
shown on Drawing & mentioned in CFO letter . Only
407 12.00 Providing, fixing, testing and commissioning of below Auto Glow Signages. In 935.26 Rupees Nine Hundred Nos.
Case of Fire do not use Lift ,Use Staircase 8"x 8" Thirty Five And Paise
Twenty Six Only
408 10.00 ADDITIONAL WORK:- Core Cutting in RCC wall, beam, columns and roof as 675.69 Rupees Six Hundred Nos.
required locations of required size & depth and repairing , making it goods Seventy Five And Paise
complete . Size 40mm to 80mm dia ( avarge depth 200) Sixty Nine Only
409 5.00 Core Cutting in RCC wall, beam, columns and roof as required locations of 1297.85 Rupees One Thousand Nos.
required size & depth and repairing , making it goods complete :- Size 100mm Two Hundred Ninety
to 200mm dia ( avarge depth 200) Seven And Paise Eighty
410 2.00 Providing and fixing cast iron following size complete with bolts, nuts, washers 6222.63 Rupees Six Thousand Nos.
and neoprene gaskets as per specifications. 100mm dia y strainer in main Two Hundred Twenty
suction header Two And Paise Sixty
411 2.00 Supply & fixing of testing and commissioning of stainless steel Y-strainer 9999.00 Rupees Nine Thousand Nos.
fabricated out of 1.6mm thickness steel, grade 304, sheet with 3mm dia holes Nine Hundred Ninety
with stainless steel flange. 150mm dia. Size Nine Only
412 12.00 Supply & fixing of testing and commissioning of Orifice plate made out of 6mm 1229.12 Rupees One Thousand Nos.
thick stainless steel Grade-304, with orifice of required size to be fitted between Two Hundred Twenty
flange & landing valve of external & internal hydrants to reduce pressure at the Nine And Paise Twelve
outlet to the level of 3.5 kg. cm2 complete as required. Only
413 3.00 Earthing with G.I.-pipe earth pipe 4.5 metre long, 40 mm dia including 7011.42 Rupees Seven Thousand Nos.
accessories, and providing masonry enclosure with cover plate having locking Eleven And Paise Forty
arrangement and watering pipe etc. with charcoal/ coke and salt as required. Two Only
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
414 3.00 Earthing with G.I.-pipe earth plate 600 mm X 600 mm X 6 mm thick including 11427.14 Rupees Eleven Thousand Nos.
accessories, and providing masonry enclosure with cover plate having locking Four Hundred Twenty
arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and Seven And Paise
salt as required. Fourteen Only
415 1.00 Costing for Liasion work with authority and obtaining Pre & Final NOC and all 117311.50 Rupees One Lakh(s) Lot
relevant applicable approvals including required drawing work. Seventeen Thousand
Three Hundred Eleven
And Paise Fifty Only
0 0.00 CHC 0.00 Rupees Nil 0 -
0 0.00 E1 - CIVIL WORK 0.00 Rupees Nil 0 -
416 1013.00 Excavation for foundation upto 1.5 m depth including sorting out and stacking of 122.94 Rupees One Hundred CMT
useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Twenty Two And Paise
Loose or soft soil Ninety Four Only
417 648.00 Excavation for foundationFor depth from 1.5 m to 3.0m including sorting out 170.50 Rupees One Hundred CMT
and stacking of useful materials and disposing off the excavated stuff upto 50 Seventy And Paise Fifty
Meter lead.(B) Dense or Hard soil Only
418 324.00 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting 287.21 Rupees Two Hundred CMT
out and stacking of useful materials and disposing off the excavated stuff Eighty Seven And Paise
upto 50 Meter lead.(C) Hard Murrum. Twenty One Only
419 1618.00 Filling available excavated earth (excluding rock)in trenches, plinth,sides of 136.92 Rupees One Hundred CMT
foundations etc. in layers not exceeding 20 cm. in depth consolidation each Thirty Six And Paise
deposited layer by ramming and watering. Ninety Two Only
420 58.00 Filling in plinth with chhara under floors including watering, ramming, 621.46 Rupees Six Hundred CMT
consolidating and dressing etc. completed Twenty One And Paise
421 432.00 Filling in foundation and plinth with murrum or selected soil in layers of 20cm 301.78 Rupees Three Hundred CMT
thickness including watering ramming and consolidating etc. complete One And Paise Seventy
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
422 576.00 Applying general insecticide pest control treatment to floors, cupboards etc 39.09 Rupees Thirty Nine And SMT
including labour materials etc. complete. Using Imidacloprid 30.5 SCas Per IS Paise Nine Only
6313 part -II( (0.075% concentration by mass) is recommended 10.5ml chemical
diluted with 5 liters of water application 0.5 litre chemical /Sqm of surface is
recommended as per I.S.
423 38.00 Provdg. & laying cement concrete 1:2:4 (1cement:2 corse sand :4 hand broken 3805.29 Rupees Three Thousand CMT
stone aggregate 20 mm nominal size) and curing complete including cost of Eight Hundred Five And
form work in (A) Foundation and plinth Paise Twenty Nine Only
424 110.00 Providing and laying design mix controlled cement concreteM-30 and curing 6010.51 Rupees Six Thousand CMT
complete excluding the cost of formwork and reinforcement for reinforced Ten And Paise Fifty One
concrete work in (A) Foundations, footings, Base of columns and Mass Only
425 307.00 Providing and laying design mix controlled cement concrete M-25 and curing 6383.98 Rupees Six Thousand CMT
complete including the cost of form work but excluding reinforcement for Three Hundred Eighty
reinforced concrete work in: (C)Floor beam up to 3rd floor level. Three And Paise Ninety
426 131.00 Providing and laying design mix controlled cement concrete M-25 and curing 7791.92 Rupees Seven Thousand CMT
complete including the cost of form work but excluding reinforcement for Seven Hundred Ninety
reinforced concrete work in: (A) COLUMN up to 3rd floor level. One And Paise Ninety
427 25.00 Providing and laying design mix controlled cement concrete M-25 and curing 6109.26 Rupees Six Thousand CMT
complete including the cost of form work but excluding reinforcement for One Hundred Nine And
reinforced concrete work in: (B) COPING up to 3rd floor level. Paise Twenty Six Only
428 25.00 Providing and laying design mix controlled cement concrete M-25 and curing 6109.26 Rupees Six Thousand CMT
complete including the cost of form work but excluding reinforcement for One Hundred Nine And
reinforced concrete work in: (B) LINTEL BEAM Lintel up to 3rd floor level. Paise Twenty Six Only
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
429 10.00 Providing and laying design mix controlled cement concrete M-25 and curing 6159.76 Rupees Six Thousand CMT
complete including the cost of form work but excluding reinforcement for One Hundred Fifty Nine
reinforced concrete work in: (C) Whether shade up to 3rd floor level. And Paise Seventy Six
430 394.00 Providing and laying Design Mix controlled cement concrete M-25 and curing 7590.93 Rupees Seven Thousand CMT
complete including the cost of form work but excluding reinforcement for Five Hundred Ninety And
reinforced concrete work in: (D) R.C.C. slab up to 3rd floor level. Paise Ninety Three Only
431 31.00 Providing and laying controlled cement concrete M-25 and curing complete 5628.91 Rupees Five Thousand CMT
including the cost of form work but excluding reinforcement for reinforced Six Hundred Twenty
concrete work in: (E) Stair case up to 3rd floor level. Eight And Paise Ninety
432 107.00 Providing, laying controlled cement concrete M-25 and curing complete 6886.96 Rupees Six Thousand CMT
including the cost of form work but excluding reinforcement for reinforced Eight Hundred Eighty Six
concrete work in: RCC wall up to 3rd floor level. And Paise Ninety Six Only
433 197850.00 Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including 78.86 Rupees Seventy Eight Kg.
bending, binding and placing in position complete upto any floor any height And Paise Eighty Six Only
434 534.88 Masonary work using Aerated light weight concrete block having crushing 4598.92 Rupees Four Thousand CMT
strength not less than 35 kg/sqcm for super structure above plinth level upto Five Hundred Ninety
floor two level in cement mortar 1:5 ( 1 cement : 5 fine sand ) complete as per Eight And Paise Ninety
Technical Specification Two Only
435 167.00 Half Masonary work using Aerated light weight concrete block having crushing 4598.92 Rupees Four Thousand CMT
strength not less than 35 kg/sqcm for super structure above plinth level upto Five Hundred Ninety
floor two level in cement mortar 1:5 ( 1 cement : 5 fine sand ) complete as per Eight And Paise Ninety
Technical Specification Two Only
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
436 6074.00 Providing 15 mm thick mala cement plaster on interior brick / concrete work for 227.21 Rupees Two Hundred SMT
plastering comprising of base coat of 12 mm thick cement plaster in cement Twenty Seven And Paise
mortar (1 Cement : 3 coarse sand) in rough finishing and 3 mm thick top Twenty One Only
coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel
including scaffolding curing etc. complete.
437 1783.35 Providing 10 mm. Thick cement plaster in single coat for plastering on ceiling 182.08 Rupees One Hundred SMT
and soffits of stairs and finished even and smooth in : (I) Cement mortar 1:4 (1 Eighty Two And Paise
cement : 4 sand) etc. complete. Eight Only
438 1916.00 20 mm thick sand faced cement plaster (Gutaka) on walls up to 3rd floor level 364.30 Rupees Three Hundred SMT
above ground level consisting of 12 mm thick backing coat of CM 1:3 (1 cement : Sixty Four And Paise
3 sand) and 8 mm thick finishing coat of CM 1:1 (1 cement : 1 sand) etc. Thirty Only
439 97.00 Providing throating or plaster drip and moulding to R.C.C. chhajja 43.05 Rupees Forty Three And RMT
Paise Five Only
440 122.00 Providing & Fixing the Chikenmesh - 20 guage(Crimp Jali) of approved size 297.95 Rupees Two Hundred SMT
applying between the RCC and masonry junction in proper line, level and plumb Ninety Seven And Paise
with all material, labour, tools, tackles and equipment. Including providing and Ninety Five Only
fixing the jali with nails, etc complete as directed by the site-in-charge.
441 6450.00 Applying two coats of Birla or Asian acrylic lapy ( putty) & two coats of primer of 40.59 Rupees Forty And Paise SMT
approved brand and manufacture on new wall surface to give an even shade Fifty Nine Only
including thoroughly brushing the surface free from mortar dropping and other
foreign matter and sand papered smooth.
442 6445.00 Providing and applying Wall painting (three coats) with plastic emulsion paint of 82.85 Rupees Eighty Two And SMT
approved brand and manufacture on under coated wall surface to give and even Paise Eighty Five Only
shade including throughly brushing the surface free from mortor droppings and
other foreign matter and sand paperd smooth on new work to give an even
shade.for all height
443 1916.00 Finishing wall with weather proof exterior emulsion paint on wall surface (two 120.26 Rupees One Hundred SMT
coats) to give an required shape even shade after thoroughly brushing the Twenty And Paise
surface to remove all dirt, and remains of loose powdered materials.etc Twenty Six Only
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
444 81.00 Providing 20 mm thick water proof cement plaster using water proofing powder 280.78 Rupees Two Hundred SMT
1Kg/1bag of cement for all floors on brick / concrete wall work using water Eighty And Paise Seventy
proofing materials in C M 1: 4 ( 1 cement 4 coasrse sand) including finishing with Eight Only
a flooting coat of neat cement slurry etc complete for all floor. and shall be
guaranteed for minimum period of 10 years after handing over the completed
building by the main contractor to be finished as directed. Stamp paper
guarantee 10 years to be furnished before receiving any payment from the
445 387.00 Providing and laying 18 mm thick polished granite stone machine cut in single 2858.30 Rupees Two Thousand SMT
piece (Max. available) in sill and jambs of Door, window, Ventilation frame laid Eight Hundred Fifty Eight
over 10 mm thick cement mortar 1 : 3 (1 cement : 3 coarse sand) and jointed And Paise Thirty Only
with grey cement slurry with matching pigment incl. rubbing and polishing half
rounding edge etc. complete colour and shed as approved by architect engineer
446 954.28 P & L 60x120 cm. Matt vitrified Tiles flooring 8 & 10mm Thick Tiles flooring over 1264.41 Rupees One Thousand SMT
20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new Two Hundred Sixty Four
surface or fixing on existing flooring by adhesive material including dismentaling And Paise Forty One Only
of existing flooring and jointed 3 MM EPOXY GROOVE with color cement slurry
including finised with flush pointing & cleaning the surface etc. complete and
Colour Shade approved by Engineer-In-Charge
447 605.00 Providing and laying polished Kota stone slab flooring over 20mm (Average) 1019.39 Rupees One Thousand SMT
thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime Nineteen And Paise
putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed Thirty Nine Only
with pigment to match the shade of slab including rubbing and polishing etc.
complete. (A) 20-25mm thick
448 116.00 Providing and laying Ceramic flooring tiles 600mm x 600mm in flooring treads of 992.15 Rupees Nine Hundred SMT
steps and landings laid on a Bed of 12 mm. Thick cement mortar 1:3 (1 cement : Ninety Two And Paise
3 coarse sand) pointing in white ceand jointed with white cement slurry. Fifteen Only
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
449 1413.00 Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm / 1488.24 Rupees One Thousand SMT
300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on 10 mm. thick Four Hundred Eighty
cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement Eight And Paise Twenty
slurry. Four Only
450 400.00 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 706.93 Rupees Seven Hundred SMT
60mm thick with grade of concrete M300 pnumatic compressed / vibrated Six And Paise Ninety
mechanically and as per approved design Confirming to IS 15658 : 2006 Three Only
including 35 mm Sand layer for levelling and filling the joint with sand in proper
line and level as per guidlines of IRC : SP 63-2018 etc. Complete.
451 27.00 Providing and laying Tactile flooring tiles 300mm x 300mm in flooring 12 mm. 808.00 Rupees Eight Hundred SMT
Thick cement mortar 1:3 (1 cement : 3 coarse sand) pointing in white ceand Eight Only
jointed with white cement slurry.
452 133.00 Providing and laying polished Granite slab flooring over 20 mm (average) base 1994.55 Rupees One Thousand SMT
of cement mortar 1:6 (1 cement : 6 coarse sand) laid and jointed with grey Nine Hundred Ninety
cement slurry including rubbing and polishing complete.18 mm thick Four And Paise Fifty Five
453 82.00 Providing and fixing Three Track Domal window having extruded aluminum 7635.60 Rupees Seven Thousand SMT
Colour anodized 60 micron Sliding section outer frame size 80 mm x 45 mm Six Hundred Thirty Five
weight 1.555 kg/m (Jindal Section code: 21376) and shutter frame 27 mm x 65 And Paise Sixty Only
mm weight 0.851 kg/m (Jindal Section code: 21490) and Section inner patti size
38.70 mm x 28.50 mm weight 0.303 kg/m (Jindal Section code 19453), mosquito
jali channel - 9 mm x 15 mm x1.20 mmx1.20 mm weight.118 kg/m (jindal
section code 15784) with 5 mm clear Frosted Glass (Modi or Saint Gobain) and
including all accesible accesories complete etc. or as directed Engineer in charge.
454 7.00 Providing and fixing standared extruded of alluminium section of size 63.50 x 1301.82 Rupees One Thousand SMT
38.10 x 1.95 mm(of Jindal Section no:4605, @ Wt 1.094Kg / RMT with colour Three Hundred One And
anodized alluminium frame with 5 mm thick transparent bronze colour tinted Paise Eighty Two Only
float glass with colour anodized alluminium frame for ventilation with 5 mm
thick frosted glass as details etc complete for.window
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
455 588.00 Providing and fixing M.S. grill of required pattern of windows etc. with M.S.. 106.23 Rupees One Hundred Six Kg.
flats at required spacing and frame alround square or round headed bolts and And Paise Twenty Three
nuts or by screws.including applying a priming coat of red lead paint and two Only
coats of oil painting etc complete (A)Plain grill
456 72.00 Providing and fixing 35mm thick both side laminated water proof flush door 2813.86 Rupees Two Thousand SMT
shuttersof archid/anchor/green ply make including firstclass hardwood and Eight Hundred Thirteen
cross band,block board core with plywood face panels,12mm thick batten And Paise Eighty Six Only
pattiall around the shutter,1mm thick. Door skin laminate sheet on both side
including (A) SS finish fixtures1) S.S. Hinges (4" x 1")-4NO (2) SS stoper 20 cm
long -1no (3) S.S. Aldrops 25 cm long -1nos (4) fancy SS Handle 15 cm-2nos . (All
nos of fixtures are for one shutter )& Fevicol, screw, nail, tap,including providing
and applying prime coat Asian /Berger make and two coats of oil painting of
Asian /Berger make to the edges etc.complete as per detail drawings and as
directed by E.I.C
457 72.00 Providing & fixing in position alluminium pivoted Single Shutter door & partition 3840.02 Rupees Three Thousand SMT
with alluminium anodized hollow section frame of approved shade Eight Hundred Forty And
fabricated from alluminium standard section for outer frame size 101 mm x Paise Two Only
44.5 mm (of app. wt. 1.30 kg/RMT) and door styles and top rial of alluminium
section size 47.5mm x 44.5 mm (of app. wt. 1.14 kg/RMT) bottom rail & lock
rail for door size 114mm x 44.5mm (of app. wt. 1.7kg/RMT) and providing
rubber gasket and glazing clips around the glass all over including providing
heavy handle, heavy lock, bracket, stoppers. 5 mm thick sheet ground glass
(frosted or obscured on one side in Top panel) fixed with transparent silicon
gasket & 12 mm thick particle board fixed clits including all required materials
labours and equipments as per detailed drawing as directed.
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
458 41.00 Providing and fixing factory made single extruded WPC (Wood Polymer 3958.59 Rupees Three Thousand SMT
Composite) solid plain flush door shutter of required size comprising of virgin Nine Hundred Fifty Eight
polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural And Paise Fifty Nine Only
fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum
toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and
screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum
compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and
resistance to spread of flame of Class A category with property of being
termite/borer proof, water/moisture proof and fire retardant and fixing with
stainless steel butt hinges of required size with necessary full body threaded star
headed counter sunk S.S screws, all as per direction of Engineer-In Charge.
459 20.00 Providing and fixing bright finish brass hydraulic door closer of approved model 1423.09 Rupees One Thousand Each
and make with necessary screws and finishing etc. complete. Four Hundred Twenty
Three And Paise Nine
460 583.09 Providing and laying white glazed tiles equal size pieces for CHINA MOSAIC 765.98 Rupees Seven Hundred SMT
WATER PROOFING TREATMENT WITH BRICK BET BASE to terrace including Sixty Five And Paise
cleaning the surface opening the creaks in " V " grooves pattened filling the Ninety Eight Only
same water proof cement mortar 1:1(1 Cement : 1 sand ) including BRICK BAT
as directed to have proper slope over a layer of C.M. 1:1 (1 Cement : 1 sand)
including finishing the top surface with 15mm thick water proof cement plaster
in C.M. (1:3) (1 Cement : 3 sand) and finishing with a floating coat of neat
cement slurry using chemical water proofing compound as per manufactures
specifications and standard specifications as per indian Water proofing or
equivalent including curing at specified period as directed including finishing the
top surface with equal size white glazed tiles pieces including round shape vata
100mm x 100mm size with filling white cement in joints, using chemical water
proofing as per mfg., specification & standards with cleaning top surface using
acid including drip moulding at the junction of vata & plaster etc..complete as
directed by E.I.C.
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
461 55.00 Fabricating, supplying and fixing in position SS railing for staircase and balcony 2057.37 Rupees Two Thousand RMT
with brush finish and 304 grade as per Indian Standrd and detailed drawing Fifty Seven And Paise
including grinding, cleaning and filling the welded spots with SS finish (Only Thirty Seven Only
Length will be paid for payment heigth max.1.0 mt.). The Work to be executed
as per consultant drawing .
462 55.00 Fabricating, supplying and fixing in position SS daso for staircase and balcony 1313.00 Rupees One Thousand RMT
with brush finish and 304 grade as per Indian Standrd and detailed drawing Three Hundred Thirteen
including grinding, cleaning and filling the welded spots with SS finish (Only Only
Length will be paid for payment ). The Work to be executed as per consultant
463 12.00 Providing and fixing Sand which type Granite platform including supplying and 3397.64 Rupees Three Thousand SMT
fixing granite stone 18 mm thick mirror polished 1st quality Granite stones in Three Hundred Ninety
top and side posiition and vertical strip at front over 25 mm thick polished Seven And Paise Sixty
kotah stone platform fixing in top and sides and itermediates supports fixing Four Only
with cement mortar and adhesivee and finishing including cutting for fixing of
sink any size (as directed by engineer incharge) at required position etc
464 6.00 Providing and fixing in position collapsible steel shutters with vertical channels 6116.59 Rupees Six Thousand SMT
20 x 10 x 2 mm braced with flat iron diagonals 20 x 5 mm size with top & bottom One Hundred Sixteen
rails of T iron 40 x 40 x 6 mm with 38 mm dia steel pulleys complete with bolts, And Paise Fifty Nine Only
nuts, locking arrangements, stoppers handles including applying a priming coat
with red lead paint & Two Coat of oil paint etc. complete
465 114.00 Providing and fixing Flexible Homogeneous Vinyl Flooring of With treatment of 1893.75 Rupees One Thousand SMT.
Plyurethane Reinforced Surface, Densely Compacted, Anti-Bactaril and Eight Hundred Ninety
fungicidal and Antistatic havng thickness of 2.00mm With weight of 3150 g/m2 Three And Paise Seventy
with levelling, chemical adhasive for fixing, corner junction. Five Only
466 218.00 Wall Painting (two coats) with antibacterial polyrethane epoxy paint approved 454.50 Rupees Four Hundred SMT.
brand and manufacture on internal walls to give an even and smooth surface. Fifty Four And Paise Fifty
Thoroughly brushing the surface free from mortar dropings and other forein Only
matter and sand prepared smooth.
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
467 160.00 Providing & applying two Componant ,non slumping ,non-sagging, thixotropic 575.70 Rupees Five Hundred RMT
epoxy bedding compond & adhesive compatible with for tiles for coving at Seventy Five And Paise
radius of 25 mm or as directed by the architect's / Engineer-in-charge make it fit Seventy Only
for tiles inclusive of Labour, material and Equipment etc. for all heights, location,
shape & size as directed by the architect/Bank engineer incharge. (Actual Length
shall be measured for payment.)
468 958.00 Providing and applying 2mm thick Texture Plaster Terre Palette (Earthen 351.48 Rupees Three Hundred SMT
Textures, Spectrum, Coral or equivalent) incorporating fine filaments made of Fifty One And Paise Forty
polymer and aggregating natural stone powder with making grooves on existing Eight Only
base coat of 18 mm thick smooth mala plaster etc. Complete Colour and shade
as approved by Architect/ Engineer in charge for all floor all height.
469 95.00 Painting two coats (excluding priming coat) on new steel and other metal 92.20 Rupees Ninety Two And SMT.
surface with enamel paint, brushing, interior to give an even shade including Paise Twenty Only
cleaning the surface an even shade including cleanicn the surface of all dirt, dust
and other foreign matter.
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
470 712.64 Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles 1674.15 Rupees One Thousand SMT
having Tegular edge & 15 mm Thick Densified edges on the Tile Periphery for Six Hundred Seventy
Extra Strength The Light weight calcium silicate ceiling tiles shall have , light Four And Paise Fifteen
reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity Only
resistance and also having thermal conductivity0.043° w/m KC.for the best
thermal Insulation . The Light weight calcium Silicate tile shall be of approved
texture Fine fissured/ Spintone/Cosmos having NRC value of 0.5 & Globe having
NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be laid on true
horizontal level suspended inter locking metal grid of hot dipped galvanized
steel sections (galvanizing @120 grams per sqm including both side) consisting
of main ‘T’ runner suitably spaced at joints to get required length and size of
24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to
centre, and cross ‘T’ of size 24X28mm made out of 0.33mm (Minimum) sheet
spaced 1200mm along spaced between main ‘T’ at 600mm centre to centre to
form agrid of 1200X600mm and secondary cross ’T’ of length 600mm and size
24x28mm made of 0.30 mm thick (Minimum) sheet to be interlocked at middle
of the 1200X600mm panel to form grid of size 600X600mm resting on periphery
walls/partitions on a perimeter wall angle pre-coated steel of size
(24X24X3000mm made of 0.40mm thick (minimum) sheet with the help of rawl
plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm
interval and laying 15mm thick Densified edges light weight calcium silicate
ceiling tiles of approved texture (Fine Fissured/Cosmos/Spintone) in the grid
including, cutting /making opening for services like diffusers, grills, light fittings,
fixtures, smoke detectors etc., wherever required, Main ‘T’ runners to be
suspended from ceiling using G.I. slotted cleats of size 25X35X1.6mm fixed to
ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm G.I. adjustable
rods with galvanized steel level clips of size 85X30X0.8mm, spaced at 1200mm
471 200.00 centre
ceiling to centre
will be main ‘T’ bottom
measured exposed
from wall to wall.with
No 24mm of allshall
deduction T-sections
for 266.64 Rupees Two Hundred RMT
exposed frames/opening (cut outs) having area less than 0.30 sqm. The calcium Sixty Six And Paise Sixty
silicate ceiling tiles shall have NRC. Value of 0.50 (Minimum) for Fine Four Only
fissured/Spintone/Cosmos and 0.75 NRC for Globe, light reflection 85% non-
combustible as per B.S. 476 part IV, 100% humidity resistance and also having
thermal conductivity. 0.043° w/m KC.for the best thermal Insulation
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
472 15.00 Providing and Supplying Of 175mm Normal Dia.UPVC Casing Pipe. 531.47 Rupees Five Hundred RMT
Thirty One And Paise
Forty Seven Only
473 1.00 Providing & Fitting Of 200mm Dia. Cap Plug. 752.27 Rupees Seven Hundred NO
Fifty Two And Paise
Twenty Seven Only
474 200.00 Providing & Fixing HDPE Pipe For Bore Well.(I) 32MM Dia 55.55 Rupees Fifty Five And RMT
Paise Fifty Five Only
475 39.00 FLUSH PARTITION (laminate finish) : 2639.14 Rupees Two Thousand SMT
Providing & fixing flush partition up to false ceiling ht (thickness of partition is Six Hundred Thirty Nine
75 mm) having 12 mm thick Marin plywood IS 710 both side on aluminum And Paise Fourteen Only
framing. Aluminum framing size for vertical & horizontal support is 50 mm x
mm. All exposed surfaces finished with 1 mm thick laminate of approved shade
without any air gap and grooving as per design. Necessary framing to be
erected above false ceiling. No extra cost to be paid for the same. Before
installation, make hole/face plate for conduit pipes of electrical / networking
cables with open able stud from partition Including all materials and labor etc.
Make necessary grooves as per shown in drawing. All bottom ends are covered
with Ghana teak bidding Patti finished with laminate Complete with all
necessary hardware & adhesives as per details given in drawing and as per
instructions of Architect/ consultant /Engineer In charge. Contractor has to
provide all necessary cut outs (race ways.) for Electrical works & no extra
payment shall be made for it.
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
476 39.00 Partly glazed partition: Providing & fixing full height partly laminated & partly 4956.06 Rupees Four Thousand SMT
glazed partition (up to false ceiling ht ) using 12 mm thick marin plywood IS Nine Hundred Fifty Six
710 both side on aluminum framing of guage 16 . Aluminum framing size for And Paise Six Only
vertical & horizontal support is 50 mm x 25 mm .Grid of aluminum framing is
600 mm x 600 mm. All exposed surfaces finished with 1 mm thick laminate of
approved shade without any air gap and grooving as per design. . Necessary
framing to be erected above false ceiling (up to beam and slab height.) No extra
cost to be paid for the same. Before installation, make hole/face plate for
conduit pipes of electrical / networking cables with open able stud from
partition Including all materials and labour etc. For glazing Using of 12 mm thick
toughen clear glass with proper crystal edges & with suggested frosted films on
glass. Frosted film material rate is provided extra as per given cost in tender
item. All joints are covered with Ghana teak bidding Patti finished with laminate.
Complete with all necessary hardware & adhesives as per details given in
drawing and as per instruction of Architect/consultant/Engineer In charge.
477 9.00 STORAGE BELOW PANTRY COUNTER :Providing & fixing full ht storage having 4292.50 Rupees Four Thousand SMT
size as per detail drawing , having depth of 600 mm, having skirting of 75 mm, Two Hundred Ninety
with proper locks. 5 nos of vertical supports & 3 no of horizontal shelves made Two And Paise Fifty Only
by 19 mm thick Marin ply, having shutters of 9 mm thick double sandwich ply
with using 12 mm thick Marin ply for framing. All complete with proper Burma
teak biding. Back ply is 12 mm Marin ply. All exposed & internal surfaces are
covered with 1 mm thick laminate. External & internal joints covered with
bidding Patti complete with laminate finish. All complete with proper hardware
like locks, S.S. Screws, MS Nails, Magnets, table chains, cable manager SS
Handles of 250 mm and 100 mm dia etc. All Details as per shown in detail
drawings & as per instructions of architect/consultant / in charge engineer
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
478 8.00 Lead Lined Doors:Providing and fixing Lead Lined Door of Navair make, 22725.00 Rupees Twenty Two SMT
comprising of Hardwood Frames, interlayered with specified thickness of lead Thousand Seven
sheet and shutter comprising with approved material as per manufacturer Hundred Twenty Five
specification, the whole system shall be in accordance to AERB norms. The lead Only
sheet Overlaps in frame & edge to edge lead lining in shutters must be
considered as approved by EIC.Door Frame: The Door Frames shall be hardwood
red merandi Frame, The Frame Shall be fully lead lined of 2 MM lead Sheet with
99% purity and as defined by AERB. Frames should be fixed by anchor fasteners
for installation on a finished plastered masonry wall opening. The size of frame
shall be min. 120 X 70 mm or as per approved manufacturer standard, with
layered specified thickness of Lead Line Sheets (in door type) being overlapped
from either side, the finish of frame etc. shall be as per direction of Engineer in
Charge. Frame rebate shall be as per manufacturer standard, the finish of the
door frame shall be wooden primer finish as per EIC. The door frame shall be
fixed with anchor fastener / dash fasteners or as per manufacturer and as
approved by EIC. Shutter: Door leaf shall be 44 mm thick with commercial ply &
laminate both side with or without vision lite.incase vision lite is required it shall
be only Lead Glass as recomomnded by AERB/DRC . The internal construction of
the door should be rigid with lead line of 2mm thick all across the inside of the
exposed surface. Shutter shall be made with 6mm commercial borad and 35mm
commercial board sandwitch between 2mm lead sheet. All doors should be
factory prepped for receiving appropriate hardware and provided with
necessary reinforcement for hinges, locks, and door closers as per ANSI
Standard , the shutter shall be finished with approved 1mm thick laminate both
Hardware: The hardware shall be fire rated hardware in accordance with
requirement of doors and as specified in the door type in the BOQ. The
479 45.00 necessary reinforcement
Providing and fixing 3 mmto be taken
thick PVCcare if required
sheets while and
as signange placement
displayofof health 785.78 Rupees Seven Hundred NOS
signs/information of required size having retro reflective letters/design as per Eighty Five And Paise
requiement, fixing the same through approved adhesive etc. complete work Seventy Eight Only
shall e carried out as per instruction of Engineer-in-charge (Approved make PVC
foamed sheet only) (45 x 15 cms.)
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
480 200.00 Supply & Installation of Cubicle/ Privacy Curtains for Hospital Track Material 2201.80 Rupees Two Thousand RMT
Made of Aluminium alloy (6063-T6), with corrosion resistanceproperties and Two Hundred One And
Standard white powder coatingTrack Size (Approximate)Gauge 1.7mm Height Paise Eighty Only
25mm Width 20mm Runner type Wheel or Glider Type Runner material Made of
Nylon of PVC Hooks Stainless Steel 202 or more Bends Tracks are bendable to a
radium of 300 mm at 90 degree to cover the whole bed Track height As per site
requirement Track roof suspenders Made of aluminium pipe of at least 12 mm
diameter and the Upper Circular Plate made of aluminium with at least 50 mm
diameter.These should be white powder Coated and fixed with the ceiling is
with anchors, bolts, screws etc.Track wall supports Aluminium white Powder
coated Tack bridge clamp Aluminium white Powder coated Curtain Removal
Point Optional : Curtain runner removal point for loading and unloading of
runners Curtain Material Polyester Blended Standard Curtain Size Height At least
84 inch or more Width At least 46 inch or more Mesh(Net) Size At least 18 inch
or more from top of the curtain and made of nylon Curtains Type:Stain
Retardant Cubicle Curtains These Curtains should be made up of fabrics with
inherent antibacterial and flame retardant properties.These curtains should be
wrinkle free and shrink proof with Anti odour and Anti-fungal properties.It
should meet the international Antimicrobial Test JISL 1902/ISO20743These
Curtains should have Dire retardent,stain retardant qualities with water
repellent quality with rust proof SS grommets 6" on centers. Designs and
Colours should be approved by the user department.
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
481 4500.00 Providing, supplying, fabricating and erecting in position the structural steel for 116.15 Rupees One Hundred Kg.
colums, grill, bars, truss, purlins, runners, cleats, insert plate, base plate etc for Sixteen And Paise Fifteen
all structural elements as per detail, made up from closed structural steel hollow Only
sections (RHS/SHS including rolled section ) as per IS 4923 of grade Yst 310 mpa -
weather resistant of Tata Structural / sections or an approved equivalent as per
details / drawings/instructions including cutting, bending, jointing, connecting,
welding and / bolting and / riveting and fabricating and erecting in position etc
complete for all levels as directed. The rate to include all necessary fixtures,
fastening including welding rods of standard approvded quality etc for complete
the job. The rate shall also include the one coat of red lead paint, epoxy coat &
necessary scaffolding etc. complete as directed
482 90.00 Providing & fixing colouron galvaniced steel, zinc / aluminium alloys coated 734.19 Rupees Seven Hundred SMT
sheet 0.5 mm. thick roofing fixed with gslvanised grom J or L hook bolts and bolt Thirty Four And Paise
8mm dia with bituman and impet washer filled with white lead etc. Excluding Nineteen Only
the cost of purlins rafter and trusses.
483 26.00 LOUVERS: Supplying and Installation of GI 84C powder coated louvers etc 2460.36 Rupees Two Thousand SMT
complete as per drawing& selection as directed by Architect/Engineer incharge. Four Hundred Sixty And
Paise Thirty Six Only
484 82.00 Providing and fixng curtain For Door/Window using Fire retardent Material 2121.00 Rupees Two Thousand SMT
including necessary hanging attachments like hooks/ rings, 25mm SS rod/ One Hundred Twenty
alluminium channel/ Socket on rod ends/ middle supporting sockets including 1 One Only
inch Adjustable Curtain S.S. Rod up to 12 ft long with best quality Curtain Knobs
and bracket or socket (2 nos 1 set) etc. complete
485 353.00 Providing and fixing high fencing with Y shape long M.S. Angle posts 40mm x 40 610.81 Rupees Six Hundred Ten Rmt
mm x6 mm (0.60 H X 0.60 W ) and oil painting 3 coats fixed at 2.5 Mt,C/c. with And Paise Eighty One
3layer of barbed wire and on Y shape Concertina Coil Diameter 900 mm, Razor Only
Type Single Razor GSM 40 GSM, Length 100 m, Material Iron, Surface
Treatment, Galvanized Etc Complete
0 0.00 E2 - PLUMBING WORK (WATER SUPPLY & DRAINAGE) 0.00 Rupees Nil 0 -
0 0.00 Part A - WATER SUPPLY PLUMBING & SANITARY FITTING 0.00 Rupees Nil 0 -
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
486 40.00 Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2 working pressure 82.85 Rupees Eighty Two And Rmt
poluthene pipes of the following outside Dia. Low densidy, complete with Paise Eighty Five Only
special falnge compression type fittings, wall clipsetc. including making good the
wall ceiling and floor.(A) 20mm
487 40.00 Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2 working pressure 106.57 Rupees One Hundred Six Rmt
poluthene pipes of the following outside Dia. Low densidy, complete with And Paise Fifty Seven
special falnge compression type fittings, wall clipsetc. including making good the Only
wall ceiling and floor.(B) 25mm
488 50.00 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure 123.44 Rupees One Hundred Rmt
poluthene pipes of the following outside Dia. Low densidy, complete with Twenty Three And Paise
special falnge compression type fittings, wall clipsetc. including making good the Forty Four Only
wall ceiling and floor.(C) 32mm
489 60.00 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure 131.96 Rupees One Hundred Rmt
poluthene pipes of the following outside Dia. Low densidy, complete with Thirty One And Paise
special falnge compression type fittings, wall clipsetc. including making good the Ninety Six Only
wall ceiling and floor.(D) 40mm
490 160.00 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure 173.71 Rupees One Hundred Rmt
poluthene pipes of the following outside Dia. Low densidy, complete with Seventy Three And Paise
special falnge compression type fittings, wall clipsetc. including making good the Seventy One Only
wall ceiling and floor.(E) 50mm
491 2.00 Providing and fixing in position cowel went to pipes.(B) 75mm dia. 393.04 Rupees Three Hundred Each
Ninety Three And Paise
492 30.00 Providing and fixing in position cowel went to pipes.(C) 100mm dia 505.17 Rupees Five Hundred Each
493 5.00 Providing and fixing screw down bib taps of following size.(B) Brass chromium 186.83 Rupees One Hundred Each
plated screws down Bib Tap. (i) 15mm dia. Eighty Six And Paise
Eighty Three Only
494 5.00 Providing and fixing Gun metal check or non-return 186.83 Rupees One Hundred Each
fullway wheel valve.(A) 15mm dia. Eighty Six And Paise
Eighty Three Only
Sr. Estimated Description of Item Rate In Rate In words Unit Amount
495 6.00 Providing and fixing Gun metal check or non-return 203.82 Rupees Two Hundred Each
fullway wheel valve.(B) 20mm dia. Three And Paise Eighty
496 9.00 Providing and fixing Gun metal check or non-return 420.63 Rupees Four Hundred Each
fullway wheel valve.(C) 25mm dia. Twenty And Paise Sixty
497 3.00 Providing and fixing Gun metal check or non-return fullway wheel valve.(D) 314.73 Rupees Three Hundred Each
32mm dia. Fourteen And Paise
Seventy Three Only
498 5.00 Providing and fixing Gun metal check or non-return 663.43 Rupees Six Hundred Sixty Each
fullway wheel valve.(E) 40mm dia. Three And Paise Forty
499 1.00 Providing and fixing ball cock of approved. quality as 137.89 Rupees One Hundred Each
directed.(B) Abonite (ii) 50mm dia. Thirty Seven And Paise
Eighty Nine Only
500 15.00 Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm. length. 101.91 Rupees One Hundred Each
One And Paise Ninety
501 46.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 170.36 Rupees One Hundred Rmt
13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of Seventy And Paise Thirty
following dia. nominal bore tube fittings and clamps including making good the Six Only
wall, ceiling and floor etc. complete.[A] 15 mm.
502 40.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 208.74 Rupees Two Hundred Rmt
13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of Eight And Paise Seventy
following dia. nominal bore tube fittings and clamps including making good the Four Only
wall, ceiling and floor etc. complete. [B] 20 mm.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Building-Specification.pdf
GRs and Conditions-11-06-24.pdf
Insurance Clause-03-11-2025.pdf
Standard Specification for Electrical Work.pdf
Performance Bond and Bitumen date.pdf
20-Special Conditions-27-05-2026.pdf
DWG-RAJULA_Part1.pdf
DWG-RAJULA_Part2.pdf
R SBD Staff Quarters 5 NOV 26.pdf
SCHDEULE B FOR RAJULA 5 NOV 26.pdf
Tender Details-110-03.pdf
Make List Dt-15-10-25-6680_Part1.pdf
Make List Dt-15-10-25-6680_Part2.pdf
Make List Dt-15-10-25-6680_Part3.pdf
01.4-Revised-SBD.pdf
CORRIGENDUM
01.3-Revised-SCHDEULE-B.pdf
CORRIGENDUM
01.2-Revised-Tender Details-110-03.pdf
CORRIGENDUM
01.1-Corrigendum-01.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .