THE MODERNIZATION WORK AT KOLLAM

Amount

e-tender for Modernization works at Kollam For more details refer tender documents

False Ceilings Work Providing and fixing Gyboard M/F suspended ceiling system consisting of True steel materials wall angels fixed all around the wall by screws at intervals not more than 70 cm C/C distance. GI Section 45 cm distance. Main G.I Manners suspended from ceiling at not more than 1220mm intervals by GI. Straphanger in one direction G.I. Cross Channels at intervals not more than 600C/C with Screws at intervals not more than300mm approximately 12.5 mm Gyproc Saint Gobain Boardof tapered edge fixed to the underside of ceiling using suitable dry wall screws at 0mm centers taped and filled to give a smooth and seamless surface.ceiling height shall be 2.75 m from FFL The job includes applying of 2 coats of plastic emulsion painintg with all putty and all

False Flooring/Dias Platform Erection of raised dias platform (4.45M long and 3M wide), entire platform and structure made 0f 19mm BWR grade plywood, Supporting strucure made of 19 mm ply at 60 cm c/c fixed both ways screwed and fixed properly to the floor ,

Conferance Tables (22 seating- convert existing table) Completely dismantle and reset existing U shape table to new shape for 22 occupancy as per the agreed design submitted (layout drawing SIDCO-KLM-008/2022) with front paneling using new and existing teak wood (Table size 1.6mx 0.6m x 0.75m - total 8 nos, 2.7mx0.6m x0.75m - 1no, and dias tabe 3mx 0.6mx 0.75m 1 no) Unit rate derived from below break down 1-SQFT Unit rate of new teak wood table with panelling = 2350 2-Cost of removal and dismantling of existing table - rs 24500 3-Cost of teak wood used from existing tables 0.592m3

Hard Wood Arm Chair Hard wood cushion chair Special Type

Wall Panelling Providing and fixing wall panelling at full height through all four sides of the hall , 8mm MR303 grade plywood fixed plywood on to wall by nails , (Panelling surface to be made flat to ensure even surface of panelling by applying adeqaute cement putty wokrs or any other means), ,Final finish shall be 3mm th.wood veneer as per design of approved shade over the plywood panel using suitable adhesive. , veneer surface to be neatly finished in matt polish.,

Curtain Works Supplying,& fixing in position coloured 0.33mm thickness acrylic coated cleanable/ washable ZEBRA blinds inclusive of all recommended accessories colour pattern etc.,

Name Board 8/6 inch height SS 3D hollow lettering of block

Provision of Floor Carpets Carpet (rib type) to be laid complete floor area permenantly fixed to the floor using adequate bonding agent.

Installation of Public System Adress PA Conferencing audio system , supply consisting of following items including installation and commissionng. AHUJA CHAIRMAN UNIT-CMC 4100 - 1 no (gooseneck type) AHUJA DELEGATE UNIT - CMD 4200 - 13 nos (gooseneck type) FEEDBACK TERMINATOR - AFT 24 F2M - 1 no 20W WALL SPEAKER –STUDIO MASTER - ARC 20 - 2 nos Audio cabling/accessories (aprox 115 m) Work includes consealed audio cable laying and termination between each units through floor / Falce floor/ Ceiling CENTRAL MIXER AMPLIFIER CMA 4400 - 1 no.

Projector Projection System: 3LCD, Native Resolution: 1024 x 768 (XGA), Color Brightness: 4100 lumens, Wireless projection , 2x HDMI digital connectivity

Projector Screen 6'x4' motorized scree with remote, 4:3 aspect ratio

Ceiling Mount Kit Installation charge , ceiling mounting kit, 10, long VGA and HDMI cables

Electrification Work Supply and installation of 12.5 to 18W LED 5700K -6500K recess mounted down lighter with electronic driver complete as required, similar make bajaj, havells, luker, crompton or philips/ EQUIVALENT

Electrification Work Supply, installation,testing and commissioning of 6A/16A socket and switch with moulded front plate and other associated accessories required as per site condition, (Make Havells,/Crabtree /Legrand)EQUIVALENT

Wall Fan Installation Supply ,installation,testing and commissioning of heavy duty wall fan similar made of crompton/orient/havells/usha/khaitanEQUIVALENT

Electrification Electrical wiring point including labour for the above electrical items using adequate number of metal box, 20mm rigid PVC condiut and all associated fittings, fixed the conduit through wall, floor , celing, false floor and partition(all concealed) cables are PVC insulated coper conductor , using 1sq for Lighting point , 1.5 for plug point (this item includes labour cost for entire electrical works, cost of cable, pvc conduits and other fittings required for wiring works)

New Grand Furniture