SPECIAL REPAIR TO MARRIED ACCN BLDG NO P 68 AT PRC RAMGARH CANTT

Taking down existing roof treatment any thickness including plastering, leaping plaster of any thickness cuting & up rooting tree roots/vegitable growth & removing the debris from the premises upto 500m from the MOD land including cleaning/washing down and keeping surfaces clean complete all as specified and as directed.

M & L for brushing neat cement slurry (@ 3 Kg of cement per Sqm) mixed with water proofing compound in the proportion ,water proofing compound, water and cement (1:4:7) or as per manufacturer's instructions for bonding of old concrete surface to new concrete, complete all as specified and as directed. Note:Water proofing compound shall be measured and paid seprerately under respective item of "BoQ"

M & L for PCC (1:2:4) ,type B-0 (using 12.5mm graded crushed stone aggregate) mixed with integral water proofing chemical compound, mixed in proportion 200 milli litre per 50 Kg of cement as in padding, benching, sunken portion etc.,on roof surface for correcting/ making proper slope on roof, etc.,complete all as specified and directed. Note:Water proofing compound shall be measured and paid seprerately under respective item of "BoQ"

M & L for cutting 75 mm wide and 65 deep in brick wall/PCC block/RCC surface any location shaping horizontal face groove filled with PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) with and including chemical compound mixed in proportion 200 mili litre per 50 Kg of cement or as per manufacturer's instructions laid when concrete is still green, complete all as specified and as directed.(Note:Water proofing compound will be measured and paid seprerately under respective item of "BoQ")

M & L for application of water proofing treatment using APP modified roof membrane over non accessible/ non approachable RCC roof slab / chajjah / canopy / parapet wall( horizontal/vertical surface) to be executed through approved applicator of the membrane manufacturer/authorized applicator of the manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly with wire brush & apply 10 mm thick plaster /rendering in cement mortar (1:3) mixed with liquid water proofing compound @ 200 ml/50 Kg of cement or as per manufacturer's instructions (b) Applying approved bituminous based primer( conforming to IS: 3384-1995) @ 0.50 litre / Sqm manufactured by the same agency as that of APP membrane with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface (c) Laying not less than 3mm thick APP (Atactic polypropylene Polymer modified prefabricated membrane) modified water proofing membrane weighing not less than 3.00 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gms/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Physical property of membrane shall be as under :- (i) Membrane weight not less than 3.00 Kg/Sqm. (ii) Non woven polyester weight not less than 160 gms/Sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 150 Kg / Sqcm and transverse not less than 450 Kg /Sq.cm at 230 degree Celsius. (v) Tear strength - longitudinal not less than 300 N & transverse not less than 250N. (vi) Elongation of reinforcement not less than 30%. (vii) Impermeability under water pressure not less than 3 Kg/Sqcm. (d) APP modified polymeric membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Applying two coat of bituminious based Aluminium Paint @ 0.3 Kg /sqm over APP Membrane.

M & L for application of water proofing treatment using APP modified roof membrane over accessible/ approachable RCC roof slab / chajjah / canopy / parapet wall( horizontal/vertical surface) to be executed through approved applicator of the membrane manufacturer /authorized applicator of the manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly & apply 10 mm thick plaster /rendering in cement mortar (1:3) with WPC as per manufactures instructions (b) Applying approved bituminous based primer( conforming to IS: 3384-1995) @ 0.30 litre / Sqm manufactured by the same agency as that of APP membrane with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface er . (c) Laying not less than 3mm thick APP (Atactic polypropylene Polymer modified prefabricated membrane) modified water proofing membrane weighing not less than 3.00 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gms/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Physical property of membrane shall be as under :- (i) Membrane weight not less than 3.00 Kg/Sqm. (ii) Non woven polyester weight not less than 160 gms/Sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 150 Kg / Sqcm and transverse not less than 450 Kg /Sq.cm at 230 degree Celsius. (v) Tear strength - longitudinal not less than 300 N & transverse not less than 250N. (vi) Elongation of reinforcement not less than 30%. (vii) Impermeability under water pressure not less than 3 Kg/Sqcm. (d) APP modified polymeric membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Applying two coat of hot air blown grade bitumen of grade 85/25 @ 1.20 Kg /sqm over APP Membrane complete all as specified and directed

S&F Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick screed bed /cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner complete all as specified and as directed.

M& L for applying evenly a tack coat of industrial bitumen 85/25 grade at the rate of 1.20 kg per sqm in sunken portion including cleaning of surfaces complete.after treatment the same shall be tested for leakage/seepage/dampness by ponding with water for 72 complete all as specified and as directed.

S &F in repair 50mm bore tubes light grade galvanised with all fittings laid in floor as in spout pipe, for protection of LT UG cables for crossing roads/on wall/poles etc including GI clamps nut bolts and washer etc complete if any all as directed and specified

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exceeding 1.50 sqm each and removing from site and making good disturbed surface of walls in cement mortar (1:3) complete all as specified & directed.

Taking down chowkats or frames with shutters exceeding 1.5 Sqm sqm but not exceeding 4.00 sqm each (without taking off shutters from the frames) etc including builders hardware etc and removing from site and making good disturbed surface of walls in cement mortar (1:3) complete all as specified & directed.

Taking down shutters of any description not exceeding 1.0 sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description exceeding1 sqm and not exceeding 2 sq m each and removing from site complete all as specified and directed.

S&F for 1.25 mm thick pressed steel frames of size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including plain cement concrete 1:3:6, type C-0 (using 12.5 mm graded crushed stone aggregate) as in filling in pressed steel door with inserting hold fast/lugs complete all as specified and directed. Note: The quoted unit rate under this item shall deemed to be included (i) one shop coat of primer (ii) a coat of bitumen paint of inner side of pressed steel door frame before filling of PCC.

S&F for 1.25 mm thick pressed steel frames of size 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including plain cement concrete 1:3:6, type C-0 (using 12.5 mm graded crushed stone aggregate) as in filling in pressed steel door with inserting hold fast/lugs complete all as specified and directed. Note: The quoted unit rate under this item shall deemed to be included (i) one shop coat of primer (ii) a coat of bitumen paint of inner side of pressed steel door frame before filling of PCC.

S& F 30 mm thick,factory made flush shutters factory made, kiln seasoned and ASCU treated solid core construction, with block board core and ply wood face panels, commercial type on both sides decorative face with lipping/ frame complete all as specified and directed.

S & F 35 mm thick, factory made, IInd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (divided into squares with plain, chamfered or rounded, mitred and rebated sash bars any number size of members), beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a); kiln seasoned & chemically pressure treated etc complete all as specified and directed . (Note:- (i)Glass / wire cloth shall be measured & paid separately.(ii) Sample of shutter in sample room of GE office.) .

M&L for framed work such as grills,gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railing; framework of water tanks and similar work conforming to Fe 290 Gd E-165 for portions framed and hung as gates, including pintle hinges, stops,hand-made sliding bolts, etc. complete all as specified and as directed

S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tubes suppyling & fixing in opening as per specification & drawing complete all as spcefied and directed by Engineer-in-Charge.

S & F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. mild steel framed shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail &bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS framed welded/sealed to stiles & rails with suitable PVC sheet beading & joined together with solvent cement complete all as fixing in the frame at site as per specification and drawing complete all as specified and as directed.

S & F in repair for 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination for cupboard shutter, shelf,aluminium frame work etc,, fixed with screws & favicol complete all as specified and directed.

S&F mild steel cupboard shutter with frame, Godrage pattern, made out 22 guage mild steel sheet including chromium plated MS handle with proper locking arragements ( brass mortice lock, vertical type, size 65mm, 4 livers with escutcheon plates & two keys ) with and including two coats of spray painting with synthetic enamel of approved tint over a coat of red oxide primer including fixing with 6 Nos 12mm dia bolts 150mm long grouted in brick wall/ concrete including making good the disturbed surface as original complete all as specified and directed by Engr-in-Charge. Make :- Godrej/ Harrison/ Link or equivalent.

S&F 30mm width of flaps (when open) continues piano hinges mild steel bright finish or elec-trogalvanised complete all as specified and directed.

S&F 40mm dia cupboard knobs fixed with nut, screw and washer of mild steel with brass polish,bright finish complete all as specified and directed

S&F ball catcher with 8mm dia steel ball and brass body and striking plate including letting and fixed complete all as specified and directed

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified & directed.

M & L for 3mm thick plain sheet glass ordinary quality and glazing with oil putty not exceeding 0.50 Sqm in each pane,complete all as specified and as directed by Engineer-in-Charge .

S&F 3.0 mm thick frosted glass pin headed type in squares/ rectangular exceeding 0.5 Sqm in each pane glazing with oil putty or aluminium frame/shutters with rubber neoprene beading complete all as specified & directed.

S&F 125 mm size of hasp and staple safety type aluminium anodized hinges pin including bolt to hinges plate complete etc all as specified & directed.

S & F 75 mm size Butt hinges medium weight cold rolled mild steel and fixed complete all as specified & directed.

M&L for Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

Material & Labour for providing and fixing stainless steel (Grade 304) hollow pipe framed work for built in writing table ,necessary hinges etc for folding parallel to wall & similar work made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the frame with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the wall or the side of waist slab with suitable arrangement complete all as directed by Engineer-in-Charge

S&F powder coated (with coating layer of minimum 50 micron thick) aluminium work for doors, windows, ventilators shutters(fixed/ sliding track two or three track) and partitions frames with extruded built up standard sections of approved make fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions with sealent with wall, i.e. at top, bottom and sides including cleat angle, C.P. brass/ stainless steel screws, all complete all as specified and directed.

S&F powder coated (with coating layer of minimum 50 micron thick)aluminium doors shutters ,aluminium section ( min weighing 1.10 kg/m) including necessary joining cleats glazing clips rubber packing anodised aluminium,snap beading screws, powder coated aluminium fittings such as peg stays 150mm long (1No.),100mm long hinges type B-21 (2Nos), suitable handle(02 Nos.) in each door top rail guide rail etc. complete all as specified and directed.

S & F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long complete all as specified & directed.

S & F Aluminium anodised barrel tower bolts of extruded section and fixed 125 mm long complete all as specified & directed.

S & F Aluminium anodised handles of extruded section and fixed 150 mm long complete all as specified & directed.

S&F 250 mm long aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repair mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.

S & F 150 mm (overall length of cover plate) floor door stopper with rubber shoes aluminium alloy body and tongue, anodised ,with hard drawn steel spring,fixed in floor complete all as specified and directed.

S & F in repair Harrison rails, mild steel, chromium plated with fixing in bracket etc complete all as spd and directed by Engr-In- Charge

S & F in repair fancy type bracket for curtain rod, suitable for 20 mm dia curtain rod of any approved colour and design complete all as specified and as directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing broken tiles and removing the all rubbish off from the premises complete all as specified and directed.

Dismatling stone slabs of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar, and removal of debries from site complete all as specified and directed.

M&L for mirror polish machine cut kota stone slab flooring 20mm -25 mm thick( size not less than 575 mm X 575 mm), laid & jointed with grey cement slurry @ 2 Kg per square mixed with pigment to match the shade of the slab including grinding, rubbing with beeswax polishing into mirror finish over & including 20 mm thick screed bed in CM (1:4) complete all as specifed & directed.

M&L for machine cut kota stone slab in skirtings,riser of steps ,dado & pillar 18 to 20 mm thick, laid and jointed with grey cement slurry pointed with cloured cement to match the shade of the slab including grinding rubbing & polishing with Bee wax polish, over 10 mm thick backing coat in CM (1:4) etc complete all as specifed & directed.

M&L for 18 to 20 mm thick granite slab (or any type) table rubbed and pre mirror polished in steps,jambs, pillar,window cill,cooking platforms and like, set & jointed in neat cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over & including 15 mm thick rendering in cement mortar(1:4) etc complete all as specifed and as directed.

M & L glazed ceramic coloured tiles of size 375 mm x 250 mm x7mm thick / 450 mm x 300 mm x7mm thick ,as in vertical surface such as dado/skirting etc ,set and jointed in neat cement slurry and pointed in colour cement to match the tiles, over & including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc., over & including 15mm thick screed bed in cement mortar 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.

M&L for 10 mm thick virtrified ceramic (Light shade) tiles polished area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 20 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for 10mm thick vitrified ceramic ( Light shade) tiles polished area of each tiles not exceeding 0.36sqm, laid in vertical surface as in dado/skirting etc over & including 10 mm thick rendering in CM 1:3,set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

Demolition of plain cement concrete(un-reinforced) of any description and in any position of not exceeding 15 cm thickness (below or above ground level) and removal of rubbish off from site complete all as directed by Engr-in-Charge.

M & L for 75 mm thick plain cement concrete (1:3:6) mix, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection, finishing the surfaces even and fair without using extra cement, including 10 mm wide, 75mm deep joints made at 3.00 m in length and filled with bitumen 85/25 grade and sand in the ratio 1:3 including necessary form work , complete all as specified and directed.

M& L for plain cement concrete(PCC) 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in sub base/levelling of floor and finish rough surface complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) as in kerb/benching/copings including weathering, slightly rounded or chamfered angle and throating including use & waste of necessary form work etc complete all as specified and directed

M & L for PCC (1:5:10), type E-2 (using 40 mm graded brick aggregate) as in sunken portion, sub-base, etc., complete all as specified and as directed.

Demolition of cement concrete reinforced as in chullah hoods, shelves, cover slab and platform, etc,including removal of rubbish out off MOD land etc complete all as specified and directed

M&L for precast reinforced cement concrete 1:2:4 ,type B-0 (using 12.5 mm graded crushed stone aggregate) as in kitchen platform, shelves ,man hole cover slab, etc. including necessary formwork complete all as specified and directed. Note : Reinforcement will be measured & paid seperately under respective item of BOQ.

M&L for mild steel TMT bars 8 to 10 mm dia and over grade Fe-500D, cut to length, bent to shape required, including cranking bending spirally for hooping for column,, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete etc all as specified and directed.

M&L machine cut cudappah stone slab 20-25 mm thick,laid over & including 15 mm thick cement screed base in CM 1:4, laid & jointed with gray cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L rounding of edges of kota/cudappa stone slabs one edge , such as in steps, cooking plateform, and other similar situation complete all as specified and directed.

Taking up or down steel tubing and connections of 15 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed.

Taking up or down steel tubing and connections of 20 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed.

Taking up or down steel tubing and connections of 25 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed.

S&F for GI water tubing medium grade, ISI marked, galvanised, 15 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors including cutting chases for brick walls and making good the surface in cement mortar 1:3 complete all as specified & directed.

S&F for GI water tubing medium grade, ISI marked, galvanised, 20 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors including cutting chases for brick walls and making good the surface in cement mortar 1:3 complete all as specified & directed.

S&F for GI water tubing medium grade, ISI marked, galvanised, 25 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors including cutting chases for brick walls and making good the surface in cement mortar 1:3 complete all as specified & directed.

Refixing/re-laying for 15 mm bore old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.)including all fitting as socket, elbow, nipple,union etc complete all as specified and directed .Note :G I Pipe obtained from item No.63 here-in -before.

Refixing/re-laying for for 20 mm bore old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.)including all fitting as socket, elbow, nipple,union etc complete all as specified and directed .Note :G I Pipe obtained from item No, 64 here-in -before.

Refixing/re-laying for for 25 mm bore old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.)including all fitting as socket, elbow, nipple,union etc complete all as specified and directed .Note :G I Pipe obtained from item No.65 here-in -before.

S&F rotational moulded polythene water storage tank of capacity 1000 ltrs (Cylindrical/vertical with closed type), triple layer construction, ISI marked, hoisted and fixed in position including 20 mm bore GI nipple and 25 mm bore ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) including taking down/dismantling of existing tank complete all as specified and directed.

S & F vitreous China wash basin, any colour, flat back size 550 mm X 400 mm including 32mm brass chromium plated waste coupling , 32 mm bore PVC waste pipe, chromium plated Grating including cutting for & pinning in ends of bracket or errecting bracket ,fixing of pillar tap & PCC 1:2:4 ,type B-1(using 20 mm graded crushed stone aggregate) for embedding brackets & making good disturbed surface with CM 1:3 complete all as specified and directed. Note : Pillar tap as supply only will be measured & paid seperately under respective item of BOQ.

S&F WC squatting pan " Orissa Pattern" of size 580 mm X 440 mm white with integral foot rest including cast iron "P" or "S" trap, front or back inlet and making connection to trap & to flushing cistern complete including taking down existing pan & making good disturbed surface complete all as specified & directed.

M&L vitreous China wash down water closet (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including connection to drain (or outgoing pipe, and to flushing pipe & antisyphonage pipe etc with aluminium hinging device including plastic seat cover & taking down existing pan & making good disturbed surface complete all as specified & directed.

S & F in repair PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including ball valve float and handle, PVC flush pipe 32 mm bore & PVC connection 15 mm bore 450 mm long with PTMT nuts and brackets complete set & making good disturbed surface with CM 1:3 complete all as specified and directed.

S&F for PVC connection 15 mm dia size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair stop valve 15mm bore chromium plated fancy type with long shank fancy type cast copper alloy, screwed down high pressure, screwed both ends for iron pipe or for brass ferrule fixed concealed in wall etc complete all as specified and directed.

S&F in repair stop valve/angle cock 15mm bore chromium plated fancy type with long shank fancy type cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule fixed in wall etc complete all as specified and directed

S & F 15mm bore bib taps ( weight not less than 400 gm) cast copper alloy, chromium plated fancy type(half/ quarter turn, with mini capstain headhandle screwed down, screwed for iron pipe and fixed to 15mm bore ipe after taking down of lod bib tap complete all as specified and directed.

S&F in repair 15mm bore long body (weight not less than 400 gm)bib tap, cast copper alloy, CP fancy type with crutch or butterfly handle, screw down, screwed for iron pipe or for brass ferrule including flange complete all as specified and directed.

S & F in repair 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F in repair 15 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F in repairs brass chromium plated shower rose with swivel joints, 125 mm size in square with chromium plated long shank arm including fixing to steel pipe or union complete all as specifed & as directed.

S & F in repairs shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300 gms), complete all as specified and as directed.

S&F in repairs stainless steel sink with drainage board made out of 1.0 mm thick sheet for kitchen with plug washers, waste pipe including bedding in cement mortar on dwarf wall or including cast iron cantiliver brackets connecting union overall size 915 x 460mm with bowl size 410 x 352 x178mm or 405x355x178mm complete all as specified and directed.

S & F in repair kitchen plate rack made of stainless steel 1 mm thick with plugs washers as overall size of 24" x 36" x 10" including fixing to wall and all accessories complete all as specified and directed.

S&F towel rail brass chromium plated towel rail , 20 mm dia ,D-type 600 mm long between flanges fixed with and including chromium plated brass screw & wooden /plastic cleats complete set all as specified and directed.

S&F in repairs bevelled edge mirror 600 mm x 450 mm x 5mm thick of any size mounted on commercial type plywood or AC sheets and fixed to wooden plugs with chromium plated screws including PVC beading ( wood finish colour) complete all as specified and directed.

S & F in repair for 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed.

S & F in repair for 75 mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed.

S&F in repair PVC (SWR) bends 110 mm dia PVC pipes with rubber ring joints complete all as specified & directed.

S&F in repair PVC (SWR) bends 75mm dia PVC pipes with rubber ring joints complete all as specified & directed.

S&F in repair PVC (SWR) junction single (single-T) equal or unequal 110mm bore provided with access door complete all as specified & directed.

S&F in repair PVC (SWR) junction single (single-T) equal or unequal 75 mm bore provided with access door complete all as specified & directed.

S&F in repair 110 mm bore PVC (SWR) vent cowl complete all as specified & directed.

S & F in repair for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement with chromium plated grating with or without hole complete all as specified and directed.

S & F in repair 110 mm dia PVC(SWR) WC connector with lip ring, complete all as directed and as specified.

Taking down cement plaster on brick wall or concrete surface etc including raking out joints hacking for key scrubbing down with water etc & removing the debris from the premises upto 500 m from the MOD land complete all as specified and directed

Demolition of brick work of any description and in any position built in cement or cement lime mortar including all quoins, arches, pillars including segregation of serviceable bricks for reuse & removal of rubbish out off from site etc complete all as specified and directed.

M&L for Brick work with sub class bricks old size , straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 etc complete all as specified & directed.

M&L for rendering 15 mm thick on face of brick masonry/concrete surface etc., in cement mortar 1:4, surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick cement plastering on fair face of brick masonry/concrete surface etc in cement mortar (1:6) surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for 5 mm thick cement plastering in cement mortar 1:4 on concrete ceiling surfaces finished even & smooth without using extra cement omplete all as specifed and as directed.

M&L for repair and rendering 10mm thick in cement mortar 1:3 on chajjas not exceeding 60cm width after removing cracked plaster and concrete including cleaning of viisible reinforcement and treating with cement slurry also necessary repair to cracked concrete, if any with cement concrete 1:2:4 Type B-0(using 12.5 mm graded crushed stone aggregate) including necessary scafolding work for double/single storey bldgs complete all as specified and direct.

M&L for prepartion of new or previously untreated wooden surface of any description , not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed.

M&L for prepartion of old painted of wooden surface of any description , not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint (ordinary tint) any colour on old wooden painted surface complete all as specified & directed

M&L for prepartion of new or previously untreated steel surface of any description , not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chromate primer complete all as specified & directed.

M&L for prepatation of newly plastered surfaces of wall and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for complete removal of existing treatment from ceilings(any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with preparation of plastered surfaces and applying two coats of cement based paint over a coat of alkali resistant primer (from same manufacturer of OBD) complete all as specified and directed.

M&L for preparation of newely plastered surfaces of ceilingl and applying three coats of white wash on ceiling surface complete all as specified & directed.

M&L for preparation of old decorated surfaces of ceiling including cornices, by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc including filling the cracks and depressions with putty and applying one coat of white wash (lime) on ceiling surface at any height complete all as specified and directed.Note :Quoted rate shall be deemed to be included for work in building/structure( like stair case, mummty ,Over head tank(OHT),sump etc of any height including necessary scaffolding )

M&L for prepatation of new plaster surface and applying two coats of distemper oil emulsion (OBD) any shade over a coat of chalk whitening primer and a layer of wall care putty (not less than 2.0 mm thick) to make entire surface free from undulations complete all as specified and directed

M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with preparation of plastered surfaces and applying two coats of distemper oil emulsion (OBD) any shade over a coat of chalk whitening primer and a layer of wall care putty (not less than 2.0 mm thick) to make entire surface free from undulations complete all as specified and directed

M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base of flooring, foundations,filling & mass concrete for fencing posts, foundation of pole ,struts & stay assembly etc complete all as specified and directed.

M&L for 80 mm thick factory made glazed machine pressed chamfered edge pre-cast concrete coloured (yellow & red) interlocking paver block of approved shade, design & pattern , laid as in footpath, light traffic parking etc, made by table vibratory method using PU mould of any shape and size conforming to IS-15658-2006 of M-40 grade laid over & including 50mm thick compacted bed over fine sand, compacting and proper embedding/ laying by vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed.

Taking down ceiling fan/exhaust fan of any sweep after disconnecting all necessary electrical connctions from ceiling rose to fan, fan blades and deposit to MES Store yard of AGE E/M Ramgarh complete all as specified and directed.

M&L for point wiring for one light/fan/exhaust fan point/ wall fan point controlled by one 5 Amp switch with using 1100 volt FRLSH PVC insulated PVC unsheathed electric cable conforming to IS:694, 1100V grade AC, single core having multi stranded copper conductor of size 1.5 Sq.mm nominal cross sectional area for phase & neutral and including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system & 1.5 Sqmm green PVC insulated unsheathed multistranded copper conductor as a earth wire connected to earth dolly by providing lugs including sunken type anodized pressed steel sheet terminal box (normal & modular type) made out of 1.6mm thick of suitable size, for mounting fittings/junction boxes including PVC board with bakelite sheet 2.8 mm thick laminated cover make sheet for housing/ fixing switches etc., including cutting holes for switches,sockets,regulators etc as per requirement including fixing with machine screw,washer etc complete all as specified and directed. Note: Proper colour coding to be adopted.

All as per item No. 119 here-in-before but one bell/buzzer point controlled by one push button on independent board with cables

All as per item No. 119 here-in-before but one 5 Amps socket outlet on same board.

All as per item No. 119 here-in-before but one 5 Amps socket outlet on independent board.

M & L for point wiring for 15 Amp power point controlled by one 15 Amp switch with 1100 volt grade PVC insulated-unsheathed 2.5 Sqmm FRLSH multi stranded copper conductor cable with continuous earth wire of 2.5 sqmm FRLSH multi stranded copper conductor cable PVC insulated-usheathed, drawn in & including concealed rigid non metallic PVC conduit medium grade with fittings (ISI marked) not less than 25 mm dia & sunken anodized pressed steel sheet boxes made out of not less than 1.6 mm thick sheet, covered with 2.8 mm thick laminated insulated cover make sheet for housing/fixing switches etc complete all as specified and directed. Note : proper colour coding to be adopted.

S & F switch piano flush button single pole one way 5 Amp, complete all as specified and as directed.

S & F Switch socket combination 2 in 1, 3 pin, 5 and 15Amp flush type, universal, complete all as specified & as directed

S & F Switch socket combination 2 in 1, 3 pin, 5Amp flush type, universal, complete all as specified & as directed

S & F socket 2 in 1, 3 pin, 5 Amp flush type, universal, complete all as specified & as directed

S&F bell push flush type 5 amp AC, 230 volts, single pole complete all as specified complete all as specified and as directed.

S&F in repair electric Bell, Ding Dong AC 230 Volts, single pole complete all as specified and as directed.

S&F Stepped type electronic fan regulator on the existing phenolic laminated sheet complete all as specified and as directed.

S&F ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body complete all as specified and as directed. .

S&F Lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings (ISI marked) complete all as specified and directed.

S &F LED bulb of capacity 15 watts lumen out put (500 lm) length 102 mm and 56 mm dia, base cap B22, 3 star, (ISI marked) complete with all accessories base (ISI marked) all as specified & directed by Engineer-in-Charge.

S & F retro type LED tube light fitting 1 x 20watt , 220 V, AC, decorative box type with driver ,holder including LED tube light surface and wall mounted LED batten PVC housing with polycarbonate diffuserand integrated electronic driver complete with all accessories ,driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting, complete all as specified and as directed by Engineer-in-Charge.

S&F LED light fitting with high out put diffuser 2 feet, 10 watt 220 V AC waith driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge

S & F LED light fitting 1 x 9W/1x10watt ,bulkhead luminaires inlcuding LED light driver, holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F new generation energy saving and environmental friendly long life versatile pressure dec cost aluminium IP 65/66 protection with fish power LED bldg security light of capacity 25/35W 230volt AC outdoor type with pre wired and necessary mounting arrangements ans provision of 2.5 sqmm three core flexible copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as specified and directed.

Labour only for refixing the ceiling fan/Exhaust fan obtained from item No. 118 above with replacement of unserviceable 3 core PVC insulated PVC sheathed 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans/ exhaust fans complete with two coats of synthetic enamel paint by spraying including filling cavities with filler after cleaining all dust etc and writing the MES Number with synthetic enamel paint complete all as specified and directed.

S & F sheet metal enclosures powder coated for DBs when MCBs to used single pole and neutral (SPN) double door 240 volts, 8 way with fixed on wall with suitable amp bus bar and neutral link (ISI marked) EARTH BAR & DIN RAIL confirm to IS:13032-1991 DB including taking down carefully existing unserveciable /old main switches, DBS along with MCBs complete all as specified and directed.

S & F amp rating 240V, 10 kA 'B' Curve miniature circuit breaker (MCB) of single poles and neutral and current carrying capacity 32 Amp in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 Amp to 32 Amp in the MCB DB Complete with connection testing and commissioning.

M & L Sub main wiring with two runs of single core 6.0 Sqmm PVC insulated FRLSH multistanderd copper conductor cable and one run of 6.0 Sqmm PVC insulated unsheathed FRLSH multi stranded copper conductor cable for earth wire drawn in & including concealed rigid non metallic PVC conduit medium grade with fittings (ISI marked) not less than 25 mm dia/appropriate dia with accessories & fittings complete and making good disturbed surface wall including taking down existing sub main wiring complete all as specified and as directed. Note : - Two runs of 6.0 Sqmm cable and one run of earth wire 6.0 sqmm & conduit shall be measured as one unit length and extra length of cable required for connection to MCBs shall be deemed to be include in unit rate quoted by bidder.