SPECIAL REPAIR TO BLDG NO 258 IN CR CAMP AND BLDG NO EW 176 MT COLONY AT IMA DEHRADUN

Amount

Cutting chases, pining in, making good to facings where reqd and pointing in cement motor (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintels, etc, and cutting chases for concealed water tubing or concilled conduit wiring, etc and making good exceed 20 cm girth in brick walls complete all specified and directed

15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.

20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.

500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed.

15mm bore stop valve chromium plated male end screwed both end for iron pipe fixed in repair complete all as specified and directed. Make- Jaguar ESSCO cat part No MQT-513AKN or equivalent of cera/Hindware

Ball valve 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms fixed in repair complete all as specified and directed.

20mm bore gun metal globe/gate valves, with iron wheel head, screwed both ends for iron/GI pipe fixed in repair complete all as directed.

Taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Rendering 5mm thick plaster in CM (1:3) on concrete surface of ceiling finished even & smooth without using extra cement complete all as specifiied and directed.

Rendering 15mm thick plaster on other than fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Rendering 15mm thick plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement and mixed with water proofing compound as per manufactures instructions, complete all as specified and directed Note- WPC will be measured paid as supply only under respective items separetely.

Complete removing of existing treatment from wall / ceilling by using machinary complete all as specified and directed. (work to be carried upto a height of 7.50m hig

Prepration of scrapped surface of wall / ceilling and applying 2mm thick Asian acrylic damp proof wall care putty in two coats as per manufactur instruction complete all as specified and directed. (work to be carried upto a height of 7.5m).

Preparation of puttyied / new surface of wall /ceiling and applying one coat of alkalai resistant primer complete all as specied and directed.

Prepration of primed surfaces of wall / ceiling and applying two coats of Appex paint ( Weather coat exterior paint) complete all as specified and directed. (work to be carried upto a height of 7.5m) .

Prepration of primed surfaces of wall / ceiling and applying two coats of oil bound emulsion distemper complete all as specified and directed.

Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on walls complete all as specified and directed.

Preparation of old plastered surfaces of ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

Preparation of new plastered/ cement plain board surfaces of ceiling and applying three coats of white wash complete all as directed.

Vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including replacement of 'P' or 'S' CI, concrete bedding and making good existing floor fixed in repair complete all as specified and directed.

100mm bore for cast-iron soil waste and vent spun pipe in any length with or without ears with cement joint fixed walls/floors including taking down complete all as specified and directed.

75mm bore cast-iron soil/waste spun pipe 75mm bore in any length without ears, with cement joints fixed in walls/floors including taking down complete all as specified and directed.

100mm bore cast-iron bends (any radius) disminishing pieces or tapers (larger bore measured) fixed in repair complete all as specified and directed.

75mm bore cast-iron bends (any radius) disminishing pieces or tapers (larger bore measured) fixed in repair complete all as specified and directed.

100mm CI branch pieces, single (equal/unequal) ordinary or inverted (spigot or socket type) or with parallel branches fixed in repair complete al as specified and directed.

100mm CI branch pieces, double (equal/unequal) ordinary or inverted (spigot or socket type) or with parallel branches fixed in repair complete al as specified and directed.

Stack clamps made out of 50mm by 5mm flat iron and 16nmm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm bore pipes fixed in repair complete all as specified and directed.

Stack clamps made out of 50mm by 5mm flat iron and 16nmm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm bore pipes fixed in repair complete all as specified and directed.

25mm thick PCC 1:2:4 type B-1 (using 20mm graded agg) used as sub floor to receive to tiles including demolition of existing old cement concrete floors etc complete all as directed.

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, as in vertical surface such as skirting dado and riser to step floor etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 10 mm thick backing in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

Glazed ceramic coloured tiles of size 300 mm x 200 mm x 7mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

75 mm thick PCC 1;3:6 type C-2 using 40mm graded stone aggregate as in plinth protection or similar places and finishing the surface even & smooth with out using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meter and every change of direction and filling the same with mixture of bitumen & sand in ratio (1:1) by weight including necessary form work etc and including demolition of existing old cement concrete, complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified & directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm each complete all as specified & directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as specified & directed

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each complete all as specified & directed

Rolled mild steel work in joist, channel, angles or tee section fixed independently without connecting plates etc complete all as specified and directed.

Powder coated aluminium anodised windows/ventilators with side hung shutter and frame made with aluminium section with and including glass (as specified below) Aluminium section shall be of size:- Frame 65 x 40mm x 1.98mm thick, Top/bottom and side style/rails of Shutter - 44 x 47mm x 1.98mm thick, Glass : 5mm thick tinted glass fixed with rubber gasket with aluminium beading. Aluminium fitting such as peg stay, aluminium hinges, aluminium handle 100mm long, aluminium tower bolt 100mm long and including taking down existing and making good of wall surface with matching to existing surfaces complete all as specified and directed.

5.5mm thick frosted glass fixed in aluminium door/window/partition fixed with rubber gasket and aluminium beading complete all as directed.

Decorative aluminium grill 3.13 Kg/Sqm (without frame) and 20x20mm aluminium cleat, screwed to main frame/fixed to wall with screws fixed in repair complete all as specified and directed by EIC.

Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks, galvanized wire of staples complete all as specified & directed.

35mm thick 2nd class H.W. glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc(with sash bars) divided into squars, with plain chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed

35 mm thick flush shutter, ISI marked, solid core construction, with block board core and ply wood face panel commercial type on both side as approved complete all as specified & directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube & edges will be painted to match with printed sheets complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails ms frame shall be covered with heat moulded plain colour PVC "C" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2010 etc complete all as directed

Steel window factory made with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded as per Drg No TD 032 Sh 1/10 to 10/10 complete all as specified and directed.

Steel window factory made with side hung shutter including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded as per Drg No TD 032 Sh 1/10 to 10/10 complete all as specified and directed.

MS work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles complete all as specified and directed.

Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing framed work of water tanks and similar work including pintal hinges, stops hand made sliding bolts etc complete all as specified and directed.

Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks, galvanized wire of staples fixed in repair complete all as specified & directed.

Hacking out old broken glass pane of any thickness and size from wooden/metal frame including punching or drilling and glazing pins etc complete all as directed.

3mm thick sheet glass ordinary quality type & glazing with wooden beads in squares not exc 0.5 Sqm in each pan, complete all as directed..

Preparation of new or previously untreated wooden surfaces of any description, over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer complete all as directedq

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.

Butt hinges, mild steel 100mm long, medium weight, cold rolled complete all as directed

250mm long aluminium anosized sliding door bolt with hasp staple (bolt type) and fixing clips to sheet cast or extruded section of cast aluminium complete all as directed.

200mm long aluminium anodized barrel tower bolt of extruded section complete all as directed.

150mm long aluminium anodized handle cast complete all as directed.

15mm bore short body bib tap chromium plated with wall flange and aerator fixed in repair complete all as specified and directed. Make- Jaguar ESSCO cat part No SQT-511KN or equivalent of Cera/Hindware

15mm dia chromium plated concealed stop cock, heavy body with cap fixed in repair complete all as specified and directed. Make: ESSCO (Jaquar) cat No.SQT-514AKN or equivalent of cera/Hindware

Chromium plated basin inlet connection (angles valve) 15mm dia screwed for iron pipe or brass ferrule, complete all as specified and directed Make: ESSCO (Jaquar) cat No.SOT-526KN or equivalent of Make cera/Hindware

PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as specified and directed.

PVC connection 15 mm size with PTMT nuts of length 450 mm fixed in repair complete all as specified and directed.

Mild steel 300mm, ordinary rat tailrod pattern springs incl roller androller plate complete fixed in repair complete all as specified and directed.

Vitreous china wash basin, white, flat back, size 630x450mm including bracket fixed in repair complete all as directed.

Chromium plated pillar cock rocket type with areator 15mm dia screwed for iron pipe or brass ferrule, fixed in repair complete all as specified and directed. Make- ESSCO (Jaquar) SQT-507KN or equivalent make of cera/Hindware

Preparation of old painted wooden surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.

Preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.

Stainless steel plate rack of size 31 inch X 36 inch X 10 inch fixed in repair complete all as directed. Make :- Make:- Prayag Cat part No.P-348 or equivalent in Blue star/Nirali.

Udaipur green marble work 18 to 20 mm thick (table rubbed and polished) as in flooring, steps, cooking platform and like with and including 20 mm thick cement screed bed in CM 1:6 and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of slab including rounding of edges of udaipur green stone and demolition of existing stone slab or tiles with screed bed of any description and in any position complete all as specified and directed.

Rubberised chequered cement concrete coloured tiles 25 cm X 25cm X 20 mm thick, set, jointed & pointed in neat cement slurry in floor with grey cement & pigment to match the surface of tiles over & including 15 mm thick screed bed in CM 1:6 complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed.

Supply and fixed in repair hat peg solid body 125mm to 175mm of brass as approved.

Brass chromium plated towel rail 600mm long fixed in repair complete all as directed. Make : ESSCO (Jaquar) Cat No. AEC-1111 or equivalent of make Cera/Hindware

S & F in repair chromium plated, soap dish (pholy carbide) complete all as specified and directed. Make : ESSCO (Jaquar) Cat No. AEC-1133 or equivalent of make Cera/Hindware

Preparing surfaces holding the members in true position and welding in reparis n. exc 2.5 cm in length, thickness of metal to be welded exc 6 mm but n. exc 9 mm complete all as directed.

Overhead shower round shape 100mm dia round shape singlei flow (ABS body chrome plated with grey face plate) with with rubit cleaning system with including 115 mm long shower arm fixed in repair complete all as directed. Make:-ESSCO (Jaquar) Cat No. EOS-542N or equivalent of Cera/Hindware

Supply and fixed in repair CP grating 100 mm dia complete all as specified and directed.

Drapery rod in any length, high strength MS pipe with corrugated PVC extrusion having outer dia 28mm with plastic ring of ABS plastic of dia 56 to 58mm, a pair of brackets, fixed in repair complete all as specified and directed.

Sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter on to dwarf wall or inclulding fixing cantilver brackets and connecting union to pipe overall size 405mm x 460mm x 203 mm bowl size 405 mm x354mm x 203mm fixed in repair complete all as specified and directed. Make :- Make:- Prayag Cat part No.1216DM or equivalent in Blue star/Nirali.

Sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter on to dwarf wall or inclulding fixing cantilver brackets and connecting union to pipe overall size 914 mm x 460x 203 mm bowl size 405 mm x 354 mm x 203mm complete all as specified and directed. Make :- Make:- Prayag Cat part No.1239DM or equivalent in Blue star/Nirali.

Marble work 18 to 20 mm thick (table rubbed and polished) as in vertical surface, Steps Jambs, Pillars, window cill, and like over and including 15 mm thick rendering in CM 1:4 and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of slab including rounding of edges of marble stone and demolition of existing stone slab or tiles with screed bed of any description and in any position complete all as specified and directed.

Rubberised chequered cement concrete coloured tiles 30 cm X 30cm X 25 mm thick, set, jointed & pointed in neat cement slurry in floor with grey cement & pigment to match the surface of tiles over & including 15 mm thick screed bed in CM 1:6 complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed.

PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in coping, benching, holdfast etc including weathering sliglitely rounded or chamfered including necessary use and waste of form work including demolition of existing old cement concrete (unreinforced) of any description and in any position for complete all as specified and directed.

Mild steel TMT bars 8mm dia and over cut to length bent to length bent to shape required including cranking bending spirally for hooping for columns hocking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

75 mm cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) using 20mm graded crushed stone aggregate complete fixed in repair all as directed.

PCC 1;5;10 type D-2, using 40 mm graded stone agg as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete complete all as specified and directed

MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing including dismantling existing framed work complete all as directed.

RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including demolition of existing RCC slabs of any description and position complete all as specified and directed.

Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces of concrete complete all as specified and directed.

Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in CM (1:6) including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed.

Brick work with sub class ‘B’ bricks (old size), straight or curved on plan to any radius in half brick thick walls built in CM 1:4 including demolition of brick work/stone masonary built in cement mortar complete all as specified and directed.

3mm thick frosted glass and glazing with oil putty or fixed with wooden beads in square n. exc 0.50sqm each pane complete all as specified and directed.

2nd class hard wood plain fillets, sectional area 6 sq cm & not exceeding 13 Sq cm, square, rectangular or triangular in section, clean sawn, secured with nails or brads, fixed in repair complete all as specified & directed.

Pre- painted colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as directed including dismantling existing sheet.

Pre- painted colour galvalume aluminium Zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges fixed with self tapping screws etc complete all as directed including dismantling existing sheet.

4 mm thick cement plain building boards fixed in ceiling to timber framework with screws with and including all accessories and two coats of white wash including dismantling existing boards etc complete all as specified and directed. Note- Work to be carried upto a height of 7.5 m

2nd class hard wood scantling clean swan 40 sqcm and over in section fixed with nails in framed work in any position including dismantling existing timber scantling complete all as specified and directed.

Mild Steel work as in angle/Tee/ hollow/ tubular section as in vertical post, rafter, purlin etc including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to I.S 1161 Gde st 240 complete all as specified and directed.

Taking down carefully existing aluminum/copper surface/concealed point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces in CM 1:3 of walls, floors, ceiling etc including distempering to match with existing surfaces complete all specified and as directed

Point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLS having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area drawn in and including concealed non metallic rigid PVC conduit not less than 20 mm dia with all fitting and fixing accessories and 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable FRLS as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes 1.6mm thick, 60mm deep of required size factory made for mounting switch, regulators etc with and including 3mm thick plastic hylam laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches, sockets etc complete for the following:- Note:- (i) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using PVC rawl plugs. (ii) Point wiring & earth wire shall be connected to each & every sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.

One light point controlled by one, one way 6 Amp switchs

One fan/exhaust fan point controlled by one, one way 6 Amp switchs

One 5 pin 5/6 Amps socket outlet point on the same board with other switchs.

One 5 pin 5/6 Amps socket outlet point on independent board controlled by one, one way switchs.

One bell point controlled by two way 6 Amp button switch.

Description all as per item No 103 here in before but point wiring with 2.5 sqmm multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm PVC insulated multi strand copper conductor cable as continous earth wire.

Sub main wiring with two single core PVC insulated unsheathed FRLS cable 1100 Volt grade, 6 Sqmm size with multi stranded copper conductor drawing into and including 20mm dia rigid PVC conduit in surface as required including one run single core PVC insulated unsheathed 6 Sqmm FRLS cable with multi stranded copper conductor colour code as a earth continuity and connected upto DB including taking down old unserviceable submain wiring etc complete all specified and as directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit. (ii) The quoted rates shall be deemed to be inclusive for fixing the conduits to surface with using PVC rawl plugs etc.

Sub main wiring with two single core PVC insulated unsheathed FRLS cable 1100 Volt grade, 4 Sqmm size with multi stranded copper conductor drawing into and including 20mm dia rigid PVC conduit in surface as required including one run single core PVC insulated unsheathed 4 Sqmm FRLS cable with multi stranded copper conductor colour code as a earth continuity and connected upto DB including taking down old unserviceable submain wiring etc complete all specified and as directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit. (ii) The quoted rates shall be deemed to be inclusive for fixing the conduits to surface with using PVC rawl plugs etc.

Sub main wiring with two single core PVC insulated unsheathed FRLS cable 1100 Volt grade, 2.50 Sqmm size with multi stranded copper conductor drawing into and including 20mm dia rigid PVC conduit in surface as required including one run single core PVC insulated unsheathed 2.50 Sqmm FRLS cable with multi stranded copper conductor colour code as a earth continuity and connected upto DB including taking down old unserviceable submain wiring etc complete all specified and as directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit. (ii) The quoted rates shall be deemed to be inclusive for fixing the conduits to surface with using PVC rawl plugs etc.

Switch piano, flush type, single pole one way, 5/6 Amp complete all specified and as directed

Switch piano, flush type, single pole one way, 15/16 Amp complete all specified and as directed

Socket outlet, multipurpose, 2 in 1, 5 pin, 5/6 Amp complete all specified and as directed

Socket outlet, multipurpose, 2 in 1, 5 pin, 15/16 Amp complete all specified and as directed

Bell push flush type, 5/6 Amps complete all specified and as directed

Ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate /isolated body complete all specified and as directed.

Exhaust fan 300mm sweep, single phase, heavy duty, 1400 RPM and connecting up including provision of cable form ceiling rose to fan, inluding making suitable hole and fixing arrnagement etc with and including box type louvers complete including taking down usnerviceable complete all as directed. Make- Havels Model No TURBOJET SP or equivalent of Khaitan/Crompton Greaves/Usha

Electronic step rotary type fan regulator 100W, 230 volts AC 50Hz complete all as specified and directed

Distribution boards epoxy powder coated TP & N 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 250 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP-MCCB 100/125 Amps as incomer and 24 SP MCBs or 4/8/ 12 TP MCBs (or any combination of SP/TP MCBs) outgoings complete including disconnecting and taking down existing DB complete all as specified and directed. Make : Legrand CAT PART No 507750 or equivalent of, L&T, ABB, Schneider. Note- Suitable MCCB and outgoing MCB's will be mearued and paid separately under relevent item of this schedule

MCCB, 125 Amps, 4 pole, 415 volts with rupturing capacity 16 KA with thermal magnetic release and adjustable overload setting having including taking out existing unserviceable MCCB complete all as specified and directed

MCB DB, sheet metal enclosures double door SPN 8 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter (METAL DOOR) type with blanking plates where required and IP 43 degree protection fixed in repair complete all as specified and directed

MCB SP 6 to 32 Amps, 240 volts 'C' Curve 10 KA, including connection with suitable size copper lugs complete all as specified and directed.

MCB ISOLATER SPN 40 to 63 Amps, 240 volts 'C' Curve 10 KA, including connection with suitable size copper lugs complete all as specified and directed.

Wall mounted LED batten fitting 22W LED 230 volts AC, cool white not less than 1200 x 108 x 62 mm extruded aluminium heat sink provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver with and including 22W LED tube rod complete and connected the same with using PVC sheathed and insulated three core flexible23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to walls complete all as specified and directed. Make:- Havells cat part nos ENDURALINEARNEOBS22WLED830SPCHW or equivellent of /Philips/Wipro.

25Watt LED cool white, energy saving IP66, environment friendly, long life, LED street light made up of pressure die-cast aluminium housing with high power LEDs as lighting source and lens embedded PC cover having top opening seperate driver compartment suitable for pole dia 43mm (max) including suitable size of bracket bent in shape including 2 Nos clamps, nut, bolts etc and fixing on walls etc complete all as specified and directed. Make:- Havells cat part No ENDURAPEARLSL25WLED 757 SASYTOPCMP or equivellent to Philips/Wipro

Wall mounted LED batten extruded aluminium housing provided for efficient heat dissipation with poly carbonate diffuser and integrated elctronic driver including 10 W LED tube rod etc and connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to walls including taking down existing fitting complete all as specified and directed Make: Havells Cat part No. ENDURALINEAR NEOBS10WLED865SPCWH or equivalent to Philips/Wipro

Surface and wall mounted LED batten extruded aluminium housing provided for efficient heat dissipation with poly carbonate diffuser and integrated elctronic driver with and including 20 W LED tube rod complete and connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to walls including taking down existing fitting complete all as directed. Make: Havells Cat part No. ENDURALINEAR NEO BS 20WLED 865SPCWH or equivalent to Philips/Wipro.

Batten holder PVC/polycarbonate type with back plate suitable for batten fitting fixed in repairs complete all as specified and directed.

Earthing complete with galvanized iron earth plate electrode 600mm x 600mm x 6mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI light grade earth lead protection pipe etc complete all as specified and directed. NOTE: (i) Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item. (ii) Any joints in earth lead from earth electrode to test point shall not be allowed/permitted. (iii) If the desired earth resistance is not found within permissible limit shall be re done by contractor at no extra cost.

JAIN BUILDERS

M/s RK ENTERPRISES

M/S S P BUILDERS

M/S RAJESH KUMAR GOYAL

Aron Water Proofing and Pest Control

M/S P K ARORA

Meher enterprises

M/S C S AITHANI