PROVN OF ALLIED SERVICES FOR TOK PUMPS IN KERI AT RAJOURI UNDER GE 862 EWS

Amount

Schedule 'A' Part-I (Building supply Work)

Total amount of Sch 'A' Part-I (Building & Internal water supply work) brought forward from srl page No-21.

Schedule 'A' Part-II (Internal Electrification works)

Total amount of Sch 'A' Part-II (Internal Electrification works) brought forward from srl page No-23

Schedule 'A' Part-III (Lightening protection Works)

Total amount of Sch 'A' Part-III(Lightening protection Works) brought forward from srl page No-24

Schedule 'A' Part-IV (Site clearance Works)

Total amount of Sch 'A' Part-IV(Site clearance Works) brought forward from srl page No-25

Schedule 'A'Part-V (Road / Path / Hardstanding Works)

Total amount of Sch 'A' Part-V(Road / Path / Hardstanding Works) brought forward from srl page No-26

Schedule 'A'Part-VI(Security wall/fencing/gate Works)

Total amount of Sch 'A' Part-VI(ecurity wall/fencing/gate Works) brought forward from srl page No-30

Schedule 'A'Part-VII(Area drainage Works)

Total amount of Sch 'A' Part-VII(Area drainagel Works) brought forward from srl page No-32

Schedule 'A'Part-VIII(External Electric supply Works)

Total amount of Sch 'A' Part-VIII(External Electric supply Works) brought forward from srl page No-36

Schedule 'A'Part-XIII (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only. B/R Portion:-

Supply, laying and fixing of galvanised punched tape concertina coil, complete having galvanised spring steel core wire 2.5mm dia cold drawn steel, galvanised, punched of low carbon steel having series of sharp barbs uniformly punched alongwith its length 550 Nos , bars on periphery per revolution , crimped on steel spring core wire weight 7.00-8.00 kg each coil, complete all as specified and directed by Engineer in Charge.

E/M Portion

Decorative Tube light fitting LED 20W tube Rod made out of basic all purpose surface and wall mounted LED batten with aluminum housing & integrated electronic driver. complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and directed. Make:-Havells Cat Part No:-LUMILINEPLUSBS20WLED865SPCSS or Equivalent cat part of make:-Wipro / Crompton / Bajaj

Surface mounted, decorative hexagon bulk head Back-lit LED luminaire comprising of high brightness LEDs. with & including 10W LED lamp and making connection with copper flexible cable of suitable size to light fitting fixed in repairs, complete all as specified and directed. Make: Havells Cat Part No HEXAFT10WLED857SSYMBOPC or Equivalent cat part of make:-Wipro / Crompton / Bajaj.

LED lamp CDL 10 watt with holder base (B22) type & 5 star rating, complete all as specified. Make of LED lamp:- Havells cat part No LHLDEUEBML8Z010 or Equivalent cat part of make:-Wipro / Crompton / Bajaj / cropmpton

LED street light fittings 25W made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 complete with hosing with all accessories pre wired with and including 32mm dia GI pipe bracket of 1.2 mtr made to shape as required fixed on wall or pole with FI clamp of required shap & 40x6mm siize, nut, bolts, washers and making connection with three core copper flexible cable of suitable size to light fitting fixed in repairs, complete all as specified and directed. Make:-Havells Cat Part No:-ENDURAPEARLSL25WLED757SASYTOPCMP or Equivalent cat part of make:-Wipro / Crompton / Bajaj.'.

Supply, installation, testing and commissioning complete of OEM manufactured, static silent (sound proof enclosure) diesel Engine Driven generating set capable of delivering 20 KVA, Water cooled, 415 volts (AC three phase, 4 wire system of supply) 50 Hz at power factor 0.8 minimum. Engine as per IS:10001/ 10002 and Alternator as per IS: 13364 complete with relay panel and switch gears for automatic starting on main failure.The DG set shall consists of diesel engine coupled to a matching alternator, through flexible coupling and mounted on common base frame and complete with control panel standardised by manufacturer, fuel tank with mounting arrangements and inlet, outlet, return and inlet oil arrangement, exhaust pipe complete and suitable for conditions prevalent at Rajouri (J&K) (capacity of Engine, alternators shall be worked out taking all derating factors into consideration) including PCC foundation (of suitable size leaving at least 0.5 M all around for easy of movement and 0.5 M height) anti vibration pads, including all features to complete with latest CPCB guidelines and comprising of following :-

(i) ENGINE (Prime Mover) : Diesel Engine 1500 RPM, direct injection, type four stroke, confirming to ISO 3046 / BS 5514, Air cooled, naturally turbo charged, capable of giving adequate BHP to drive alternator capable of delivering 20 KVA at outdoor atmospheric conditions at Rajouri (J&K), ( Taking all derating factor into consideration), Dry cell battery to be provided as per manufacturer recommendations, electric battery start, complete with flywheel all standard fittings / fixtures as per manufacturer and including suitable panel with tachometer, lub oil, temperature, pressure gauge and frequency meters and also including self starter system, dynamo, fuel electric control panel with electronic speed governor (ECPG) and engine protection system (shut down, High water temperature, low lub oil, oil pressure, over speed etc) fuel tank, emergency stop button and first fill of lub oil and other consumables including Diesel for commisioning test by IEM etc.

(V) ACCOUSTIC ENCLOSURE :- Sheet metal fabricated cope type silent enclosure manufactured on CNC machines as per CPCB norms and powder coated after seven tank process, the enclosure shall be designed for reducing the sound level to 75 DB (A) at a distance of 1 M at 75% load under field condition and OX, 70 DB at 3 M from Gen set when DG set is working at full load alongwith testing conformance, labeling certification etc as laid down in GSR No 371 (E) dt 17 May 2002. (VI) Foundation / Plinth / Base : Shall be provided as per manufactures recommendations, however minimum 0.5 M space should be available all around the set and height of plinth shall not be less than 0.5 M. (VII) Diesel storage tank of capacity adequate for storage of diesel for 12 hrs operation of Gen Set. (VIII) MISC : Tool kit, operation and maintenance catalogue spare part list, overhauling manuals, guarantee card etc shall be provided as per manufacture standard practices.

M & L for SMC Junction Box of size 300mm x 200mm x 105 mm factory made powder coated consisting of Aluminum bus bar of size 20 x 3 mm - 04 Nos and MCB SP 10 Amps- 01 No complete all as specified and directed by Engr in-Charge.

Supply and fix in replacement of street light bracket made out of 32mm dia GI tubing medium grade made to shape 1.2 mtr long incl duly painted with synthetic aluminium paint over a coat of primer incl MS clamps and back plates fabricated from steel section including nuts, bolts, washers 02 set complete as directed

Supply and fixing factory made out door type LT Panel totally enclose and both side opening with locking arrangement of suitable size 415V 3 phase 4 wire having 400 Amp electrolytic Aluminium bus bar made out of fabrication of 3.15mm CRCA sheet thicknes duly powder coated with enamelled paint over a one coat of red oxide primer and varnishing water proof and suitable for fixing of following complete PCC work by providing 60 cm long angle iron of size 50x50x6mm above ground level welded on all the fuse corners duly comprising of the followings :- INCOMMING :- (a) MCCB 125Amp Four Pole 35KA.-01 No (b) Ammeter Digital type(0-100A) - 01 No (c) Voltmeter Digital type(0-500V) - 01 No (d) CT's - 03 Nos (e) Indicating lamp LED type - 03 Nos (f) On Load Changeover 125Amp FP-01 No OUTGOING :- (a) MCCB 63 Amp Four Pole 35KA.-03 No (b) MCCB 40 Amp Four Pole 35KA.-01 No (c) 32 Amp ,SPN MCB of 10 KA Rupturing capacity"C" Series-02 Nos

Supply & install Servo Voltage stabilizer (Outdoor type) for automatic operation Three phase naturally oil cooled indoor type & designed for input varition between 300 v to 480 v with output voltage stabilized at 415 V with accuracy ±2.5% and speed of correction 8 volts per second and of capacity 25 KVA. complete all as specified & directed. Note:-Voltage stabilizer shall be copper wounded.

Supply and fixing Environmental friendly, ultra modern, energy saving, surface mounted, decorative Post Top LED 15 , IP65 protection including connecting electricaly using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm, Make - Havells or equivalent in Bajaj/,Crompton Greaves

m/s vishkarma construction

MS RUKSANA KOUSER