Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.1 LAccepted-AOC VILL SILPATA POST OFFICE PITHORAGARH DISTT PITHORAGARH UTTARAKHAND 262501 | PITHORAGARH | PITHORAGARH | UTTARAKHAND | 262501 | ₹4.1 L Quoted ₹4.2 L | L1 | Accepted-AOC being L1 and reasonable |
| 2 | L2₹5.0 LRejected-Finance | ₹5.0 L | L2 | Rejected-Finance being other than L1 |
| Sl No | Description | Qty | Unit | m/s RC punetha L1 | m/s MD pandey sons L2 |
|---|---|---|---|---|---|
| .05DESCRIPTION OF ITEMS | |||||
| 1.00 | REPAIR TO BED HARD MAP FD-E6/MAP/08 (R )
(a) Taking out unserviceable ply wood top from bed hard plywood top and s & f 12 mm thick plywood top BWR grade make Archid/Century ply/Green ply with 10 Nos. new nut & bolts of size 5mmx65mm/5mmx100mm and 2mm thick washers including tightening/assembling of loose frames/componenet ncluding tightening/assembling of loose frames/componenet and including fixing 4 nos hard rubber shoes to be provided on the legs of charpoy complete all as specified and directed | 28 | Each | 1,500 ₹42,000 | 1,700 ₹47,600 |
| 1.10 | (b) All joints welding & fixing shall be done in accordance with the standard work manshop/specification the welding joints shall be filled smooth before application complete all as specified and directed | 10 | Each | 40 ₹400 | 60 ₹600 |
| 1.20 | (c) paint painting shall be done with two coats of snthetic enamel colour black with spray gun over two coat red oxide primer complete all as specified and directed | 28 | Each | 120 ₹3,360 | 115 ₹3,220 |
| 1.30 | (d) 6 Nos of MS Plate of size 25x60MMx6mm MS Cleat welded frame to support ply | 40 | Each | 15 ₹600 | 10 ₹400 |
| 1.40 | (e) S & F in replacement 6mm thick check nuts as approved by GE complete all as specified and directed | 40 | Each | 15 ₹600 | 30 ₹1,200 |
| 2.00 | REPAIR TO RACK SHOE STEEL FD-E6/MAP
(a) paint painting shall be done with two coats of synthetic enamel colour black with spray gun over two coat red oxide primer complete all as specified and directed | 150 | Each | 100 ₹15,000 | 120 ₹18,000 |
| 3.00 | REPAIR TO TABLE WITH DRAWAR STEEL 900X600X760MM FD-1008
(a) Removing of preparation the old painted surface of table with drawar steel 900x600x760, esternally and intrnally by redusting the cleaning oily/greasy spots patches by kerosene oil, scrapping and sanding flacky surfaces, and primer on visible depression and repainting of one coat of synthetic enamel paint (OG)/Smoke grey/silver with spray machine complete all as specified and directed | 25 | Each | 50 ₹1,250 | 60 ₹1,500 |
| 4.00 | REPAIR TO TABLE OFFICE CLK STEEL/OFFCER STEEL 1200X600 FD-84.
(a) Removing of preparation the old painted surface of table clk steel 1200x600 as per drawing no. FD-84 esternally by redusting the cleaning oily/greasy spots patches by kerosene oil, scrapping and sanding flacky surfaces, and primer on visible depression and repainting of one coat of synthetic enamel paint (OG)/Smoke grey/silver with spray machine complete all as specified and directed | 100 | Each | 140 ₹14,000 | 130 ₹13,000 |
| 5.00 | REPAIR TO CHAIR SCHOOL WITH HAND BOARD FD/E6/MAP/05
a) Removing of old U/S hand board S & F and New MDF with all round teak wood beading | 100 | Each | 150 ₹15,000 | 120 ₹12,000 |
Updated dates
Tender Value
₹5 L
EMD Value
₹10,000
Closing Date
19 Feb 2026, 6:00 pmClosed
GE Pithoragarh
GE Pithoragarh Post - Bharkatiya Pithoragarh - 262520
GE/PGH/89 of 2025-26
2026_MES_748888_1
8746/PGH/E8
Open Tender
Civil Works
180 days
Dharchula
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE Pithoragarh
₹10,000
Yes
26 Mar 2026
16 Jan 2026
26 Feb 2026
16 Jan 2026
19 Feb 2026
31 Jan 2026
19 Jan 2026 - 23 Jan 2026
DESCRIPTION OF ITEMS
REPAIR TO BED HARD MAP FD-E6/MAP/08 (R ) (a) Taking out unserviceable ply wood top from bed hard plywood top and s & f 12 mm thick plywood top BWR grade make Archid/Century ply/Green ply with 10 Nos. new nut & bolts of size 5mmx65mm/5mmx100mm and 2mm thick washers including tightening/assembling of loose frames/componenet ncluding tightening/assembling of loose frames/componenet and including fixing 4 nos hard rubber shoes to be provided on the legs of charpoy complete all as specified and directed
(b) All joints welding & fixing shall be done in accordance with the standard work manshop/specification the welding joints shall be filled smooth before application complete all as specified and directed
(c) paint painting shall be done with two coats of snthetic enamel colour black with spray gun over two coat red oxide primer complete all as specified and directed
(d) 6 Nos of MS Plate of size 25x60MMx6mm MS Cleat welded frame to support ply
(e) S & F in replacement 6mm thick check nuts as approved by GE complete all as specified and directed
REPAIR TO RACK SHOE STEEL FD-E6/MAP (a) paint painting shall be done with two coats of synthetic enamel colour black with spray gun over two coat red oxide primer complete all as specified and directed
REPAIR TO TABLE WITH DRAWAR STEEL 900X600X760MM FD-1008 (a) Removing of preparation the old painted surface of table with drawar steel 900x600x760, esternally and intrnally by redusting the cleaning oily/greasy spots patches by kerosene oil, scrapping and sanding flacky surfaces, and primer on visible depression and repainting of one coat of synthetic enamel paint (OG)/Smoke grey/silver with spray machine complete all as specified and directed
REPAIR TO TABLE OFFICE CLK STEEL/OFFCER STEEL 1200X600 FD-84. (a) Removing of preparation the old painted surface of table clk steel 1200x600 as per drawing no. FD-84 esternally by redusting the cleaning oily/greasy spots patches by kerosene oil, scrapping and sanding flacky surfaces, and primer on visible depression and repainting of one coat of synthetic enamel paint (OG)/Smoke grey/silver with spray machine complete all as specified and directed
REPAIR TO CHAIR SCHOOL WITH HAND BOARD FD/E6/MAP/05 a) Removing of old U/S hand board S & F and New MDF with all round teak wood beading
b) Removing of old U/S PVC seats & Back S & F New seats and back .
(c) paint painting shall be done with two coats of snthetic enamel colour black with spray gun over two coat red oxide primer complete all as specified and directed
REPAIR TO TABLE 90x60 CM WITH DRAWER FD- 283 (a) S & F new table top of size 90x60 cm made of MDF board 18/19 mm thick exterior grade in teak finish duly covered with half round PVC edging in black or approved colour on open ends/all around as in replacement of unserviceable/broken
(b) M & L for repolishing of complete exposed surface of table after preparation of surface with french polish complete all as specified and directed
REPAIR TO TABLE WRITING FD- 275 (a) S & F new table top of size 1145mm long, 600mm wide and 760mm high made of MDF board 18/19 mm thick exterior grade in teak finish duly covered with half round PVC edging in black or approved colour on open ends/all around as in replacement of unserviceable/broken
(b) M & L for repolishing of complete exposed surface of table after preparation of surface with french polish complete all as specified and directed
REPAIR TO TABLE DINING 120x90 CM FD MAP-II/03 (a) S & F new table top for dining 120x90cm made of pre laminated MDF Board 18/19mm thick exterior grade in teak finish duly covered with half round PVC edgining in black colour or approved colour on open ends/all round/all around the table top irrespective of whatever is shown on drawing as in replacement of unserviceable/broken top complete all as specified, shown on drawing.
(b) S & F new leg of table dining 120x90cm made of shisham wood of size and shape/pattern as in replacement of unserviceable/broken leg complete all as specified shown on drawing and directed
(c) S & F new front/rear rail of table dining120x90 cm made of shisham wood of size and shape/pattern as in replacement of unserviceable / broken rail complete all as specified shown on drawing and directed
(d) S & F new side rail of table dining 120x90 cm made of shisham wood of size and shape/pattern as in replacement of unserviceable/broken side rail complete all as specified shown on drawing and directed
(e) M & L for repolishing of complete exposed surfaces of table dining after preparation of surfaces with one coat of french polish complete all as specified and directed.
CHAIR CB STEEL WITHOUT ARMS FD-75 (a) Removing existing unserviceable seat of chair CB steel with out arms. Cleaning rebated portion and welding wherever required, smoothing with emery paper and painting with one or more coat required with synthetic enamel paint OG to steel frame
(b) Supply and fixing of new seat of chair CB steel with out arms made out of 2nd class hardwood (Shisham) duly painted and canning with cane plastic 1.8mm thick Godrej pattern and border with 3.5 mm cane plastic and fixing the same with appropriate size of nuts & bolts to steel frame as shown on drg and as directed
(c ) S & F New back rest frame for steel chair CB with out arms steel made of 2nd class hardwood of size 480x350mm/440x380mm/460x360mm duly painted
(d) S & F flat iron strip 500x25x3 mm two Nos under each seat fixed with running welding to steel frame duly providing holes for screws and all as directed
(e) S & F flat iron strip 500x25x3 mm two Nos back of chair fixed with running welding to steel frame duly providing holes for screws and all as directed
TRESTLE STORE ROOM STEEL FD-1043 Overall size shall be 2440mm long, 600mm wide a 300mm high and All Steel and iron work surfaces shall be painted with two coats of synthetic enamel paint (OG) over a coat of primer with spray machine after preparation of steel surfaces on exposed to view when placed in position.
REPAIR TO TABLE DRESSING LADIES WITH MIRROR FD-E6/MAP/07 a) Removing of old unserviceable ply wood and provision of new ply wood 6mm thick, commercial fixed on back side of dressing mirror, size as shown on drawing, ISI marked Complete all as shown in drgs and as directed.
b) Removing of old U/S top and bottom sides of table dressing ladies and S& F of new sides made of 18/19mm thick pre laminated MDF board all as shown on drg and as directed.
c) Removing of old U/S verticle sides of table dressing ladies and S& F of new sides made of 18/19mm thick pre laminated MDF board all as shown on drg and as directed.
d) Removing US looking mirror and S&F of new looking mirror 5mm thick complete including wooden frame fixed with 6mm plywood back side of frame provided all as shown on drawing and as directed.
e) S&F in repairs RAWL plugs of approved quality complete all as shown on drawing and as directed.
CHARPOY STEEL WITH PLY TOP (a) Taking out unserviceable ply wood top from charpoy plywood top and s & f 12 mm thick plywood top BWR grade make Archid/Century ply/Green ply with 10 Nos. new nut & bolts of size 5mmx65mm/5mmx100mm and 2mm thick washers including tightening/assembling of loose frames/componenet ncluding tightening/assembling of loose frames/componenet and including fixing 4 nos hard rubber shoes to be provided on the legs of charpoy complete all as specified and directed
(b) All joints welding & fixing shall be done in accordance with the standard work manshop/specification the welding joints shall be filled smooth before application complete all as specified and directed
(c) paint painting shall be done with two coats of snthetic enamel colour black with spray gun over two coat red oxide primer complete all as specified and directed
(d) 6 Nos of MS Plate of size 25x60MMx6mm MS Cleat welded frame to support ply
(e) S & F in replacement 6mm thick check nuts as approved by GE complete all as specified and directed
Note : Tenderers may note that amount of credit Rs 2,338.50 will be deducted from the total amount arrived, at the time of Acceptance of contract.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.29 MB
tender_docs.pdf
Tender Documents • 1.27 MB
BOQ_838672.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid