REPAIR AND MAINT OF ELECTRICAL SUPPLY LT PANEL, MCCB, CABLES AND CONNECTED WORKS INCLUDING REPAIR AND MAINT OF WATER SUPPLY RISING AND DISTRIBUTION LINE, INCLUDING ALL ACCESSORIES AND CHLORINATION OF WATER SUPPLY ATMIL STN NAHAN UNDER GE CHANDIGARH

Amount

Disconnecting and taking down unserviceable Service cable of any size from LT Pole to existing distribution board complete all as directed.

Dismentling of ACSR conductor sizes from Poles complete all as directed. Note : T&P for Srl item No 01 & 02 will be provided by the Contractor.No extra payment will be made for it.

Excavation in trenches n exc 1.5 mtr wide and n exc 1.5 meter in depth and forming bottom surfaces to the required gradient and slope for laying of cable, pole etc and getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge.

Returning, filling, in including spreading, levelling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested, all as specified.

Removing excavated surplus (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as specified.

M&L for Brick protection for LT cable with sub class "B" bricks laid dry and flat abutting each other with gaps between adjacent bricks not exceeding 10mm with width equal to length complete all as specified and directed by Engr-in-Charge

Supply and laying dry river sand to be laid in 8 cms before laying of cable and 15 cms above cable in trenche as cable cushioning and covering complete all as specified and directed. Note: for payment purpose punned thickness shall be measured

Supply and laying double wall corrugated pipe (DWC) confirming to IS 14930 Part-I of size 120 mm outer dia and 103.5 mm inner dia all as directed.

Ditto- all as per item 08 but of size 90 mm outer dia and 76 mm inner dia all as directed.

Ditto- all as per item 08 but of size 77 mm outer dia and 63 mm inner dia all as directed.

Ditto- all as per item 08 but of size 63 mm outer dia and 50 mm inner dia all as directed.

Supply, laying ,jointing and testing LT XLPE insulated cable screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of cross-sectional area 10 sq mm, 2 core making all incoming and out going connections through the lugs/thimbles after taking out of old unservicable under ground cable from trenches/road/alongwalls/ pipe/ poles complete all as specified and directed . Note :- Excavation & earth work shall be measured & paid separately under respective item of this schedule

Ditto- all as per item 12 but size 16 sq mm 2 core

Ditto- all as per item 12 but size 16 sq mm 4 core

Ditto- all as per item 12 but size 25 sq mm 4 core

Ditto- all as per item 12 but size 35 sq mm 4 core

Ditto- all as per item 12 but size 50 sq mm 3.5 core

Ditto- all as per item 12 but size 70 sq mm 3.5 core

Ditto- all as per item 12 but size 95 sq mm 3.5 core

Ditto- all as per item 12 but size 185 sq mm 3.5 core

M&L in replacement cast iron LT cable route indicator of size 100mm dia round plate 2mm thick with stand of angle iron approx 75mm long duly marked with LT/MES embedd in concrete block in PCC 1:2:4 complete all as specified and directed.

All as per Item No: 22 here in before but the following accessories are inbuilt in this items:-(As a Junction Panel) (i) MCCBs TP, 415 Volts grade, 200 Amps rating and 36 KA rupturing capacity with Microprocessor release : 01 No

Supply and fixing in replacement of cubical out door type feeder pillar box for housing Busbar chamber etc, of suitable size made out of CRCA Sheet 3.2 mm thick, duly powder coated from inside and outside, dust, vermin and weather proof, having front openable door with cam locking arrangement, 2mm thick MS gland plate for cable entry provided at bottom, foamed-in PU gasket around doors & gland plates, earthing straps, complete panel fixed on 40 x 40 x 3 mm angle iron 04 leg frame duly grouted in PCC (1:2:4) (Each leg 50 cm grouted in ground/floor and 40 cm above floor level) with inbuilt of TPN 4 way, 415 volts with bus bar rating 100 Amps, dust and vermin proof and IP 43 - IK 09 protection - 01 No including making electrical connection of incoming supply and all out going electric circuit,through proper lugs/thimbles complete all as directed.

Material and labour cutting road/path way (concrete) any type including excavation returning in spreading, leveling , well ramming in layers, soiling with stones, WBM 7.5 CM thick and laying premix carpet 25mm thick using ready mix patch mate material, including rolling and compection of path work complete all as directed.

M&L for Earthing complete with Galvanised steel earth plate electrode of size 60cmx 60cm x 6mm thick electrode buried directly in ground (earth pit not less than 2.25 meters deep below the normal ground level) with top edge of the plate not less than 1.5 m below normal Ground Level connected to GI earth wire 4 mm dia by means of bolts, nuts, check nuts and washers and earth lead protected by 15mm dia GI pipe medium grade connected to main distribution board/ earthing test point all as shown on electrical plate No-03 of SSR Part-1 and all as specified including testing on completion. Note: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bars @ 150mm c/c both ways , GI funnel with watering pipe 20 mm dia, wire mesh, salt and charcoal, protection pipe for earth lead upto 7.50m long complete earthing, specified in SSR part-II.

Excatation in river bed/bank or side of river to digging of boulder stone, earth with the help of earth moving maching like JCB for making a un lined channel having length exc 400 mtrs but not more than 500 meter, width equal to 2.0 mtr approx and depth should be 2.30 mtr including arranging stones/boulders in bunds fashions etc The slope of this channel should be from upstream river to towards MES pump house stage I at Markanda at times ,So that surface river water shall colected in RCC chamber, the work should be executed as per the direction of Engineer-in-Charge as and when required and should completed with in stipuated time limit (Not more than 12 hrs) in all respect. NOTE : The quoted rates are including of men, material, machinery and CP any other expenditure occured by contractor.

M&L for Cleaning of Mild steel tank ( Stage II Pump House) of capacity 10000 gallons staged on more than 10 metre height staging after draining out the water from the tank including complete removal of silt, sludge, fungus, dirt deposited on the internal surfaces of tank by scrapping with wire brush and removing vegetation if any,incl removal of debris/sludge to a distance exc 250 mtrs but n.exc 500 mtrs, washing internal surfaces including ceiling with clean water mixed with bleaching powder twice in inner surface,day after applying two coats of synthetic enamel paint (colour will be decided by Engr-in-Charge) over one coat of red oxide zinc chrome primer of inner and oute side of the Mild steel OHT tank after complete removal of existing paint , corrosion etc including removing of existing unserviceable corroded steel angle section by applying two coats of synthetic enamel paint over a coat of red oxide complete inner and out side of the MS angle section etc including writing, cleaning date/due date for cleaning with white enamel paint on black colour surface complete all as specified and as directed by Engineer-in-charge.Note:- The replaced steel member will be measured and paid for separately in respective items.

M&L for Cleaning of RCC over head reservoir (Near Stage III filteration plant) of capacity 100000 gallons and 6 mtr depth staged on more than 18 metre height staging after draining out the water from the tank including complete removal of silt, sludge, fungus, dirt deposited on the internal surfaces of tank by scrapping with wire brush and removing vegetation if any,incl removal of debris/sludge to a distance exc 250 mtrs but n.exc 500 mtrs, washing internal surfaces including ceiling with clean water mixed with bleaching powder twice in inner surface, and applying two coats of cement base paint to internal surface including ceilings & wall complete etc including writing, cleaning date/due date for cleaning with white enamel paint on black colour surface including applying one coat of exterior emulsion weather proof paint over a coat of primer for complete outside of the over head tank and applying two coats of synthetic enamel paint (black) over one coat of red oxide zinc chrome primer including removing of existing unserviceable corroded stairs for complete steps ( MS angle section) incl S& F in replacement of Aviation obstruction light complete all as specified and as directed by Engineer-in-charge..Note:- The replaced steel member will be measured and paid for separately in respective items.

Dismantling and Taking out existing unserviceable MS Header and M & L for MS header of size 250 mm dia made out of MS pipe 250 mm dia heavy duty having a length of 8 to 9 mtr with 4 Nos flanged tee of size 250x250x150mm, including necessary welding work for fixing of existing water supply main line of size 150 mm dia, 3 Nos and 2 Nos 150 mm dia distribution lines on either side of the MS header using suitable size MS reducer including making good on disturbed surfaces by applying two coats of synthetic enamel paint over a coat of red oxide primer complete as directed by Engineer-in-Charge

Dewatering / de-silting including cleaning with wire brushes bottom and side walls to the extent surfaces is clearly visible and all deposits etc removed including M&L for one coat of thick cement wash with cement slurry @ 3 Kgs/Sqm to achieve the finish with distempering brush for under- ground reservoir of capacity 30000 Gallons and 3.5 mtrs deep at Stage-II and removal of sludge/silt to a distance exc 250 mtrs but n.exc 500 mtrs and depositing where directed complete all as specified and directed by Engineer-in-Charge. Note : The rates are inclusive of mionor B/R repair of side wall/botom or top surface of tank and cleaning with bleaching powder as well,contractor also needs to put the date of each cleaning and next sch date of clean of tank with visible paint at location complete all spcified and directed.

Dewatering / de-silting including cleaning with wire brushes bottom and side walls to the extent surfaces is clearly visible and all deposits etc removed including M&L for one coat of thick cement wash with cement slurry @ 3 Kgs/Sqm to achieve the finish with distempering brush for L shape under- ground filtration tank of capacity 10000 Gallons and 2.5 mtrs deep at Stage-II and removal of sludge/silt to a distance exc 250 mtrs but n.exc 500 mtrs and depositing where directed complete all as specified and directed by Engineer-in-Charge. Note : The rates are inclusive of mionor B/R repair of side wall/botom or top surface of tank and cleaning withbleaching powder as well,contractor also needs to put the date of each cleaning and next sch date of clean of tank with visible paint at location complete all spcified and directed.

Dewatering / de-silting including cleaning with wire brushes bottom and side walls to the extent surfaces is clearly visible and all deposits etc removed including M&L for one coat of thick cement wash with cement slurry @ 3 Kgs/Sqm to achieve the finish with distempering brush for L shape under- ground reservoir of capacity 2x50000 Gallons and 3.5 mtrs deep at Stage-III and removal of sludge/silt to a distance exc 250 mtrs but n.exc 500 mtrs and depositing where directed complete all as specified and directed by Engineer-in-Charge. Note : The rates are inclusive of mionor B/R repair of side wall/botom or top surface of tank and cleaning withbleaching powder as well,contractor also needs to put the date of each cleaning and next sch date of clean of tank with visible paint at location complete all spcified and directed.

Dewatering / desilting including cleaning with wire brushes bottom & side wall of the extent surface is clearly visible etc removed incl M&L for one coat of thick cement wash with cement slurry @ 3kg/Sqm to achieve the finish with distempering for sedimentation tank of 8 metre x 7 metre x 6 metre including channels and painting of steel channels( Steel angle section) / other member with one coat of red oxide and two coat of black bitumenous paint (at Stage-II) including removal of sludge/silt to a distance exc 250 mtrs but n.exc 500 mtrs and depositing where directed Complete all as specified and as directed .

Cleaning of stage I, II & III including clearing of all debries, pipe scaling, plant tree leaves,trimming of branches over on LT line and other material from water supply installation and deposit beyond Mod land & Cleaning of above ground water tank.T&P will be provided by the contractor which is included in this quoted rate.

Dewatering / de-silting including cleaning with wire brushes bottom and side walls to the extent surfaces is clearly visible and all deposits etc removed including M&L for one coat of thick cement wash with cement slurry @ 3 Kgs/Sqm to achieve the finish with distempering brush for under- ground reservoir of capacity 20000 Gallons at Stage-I and removal of sludge/silt to a distance exc 250 mtrs but n.exc 500 mtrs and depositing where directed complete all as specified and directed. Note :The rates are inclusive of mionor B/R repair of side wall/botom or top surface of tank and cleaning withbleaching powder as well,contractor also needs to put the date of each cleaning and next sch date of clean of tank with visible paint at location complete all spcified and directed.

S&F as in repair brass spindle, with spindle nuts brass ring, nuts gland packing and its suitable for connecting properly in base plate etc of existing sluice valves of 250/200 mm bore complete all as specified and as directed

All as per item No 46 of above but 150 mm bore sluice valve

All as per item No 46 of above but 100 mm bore sluice valve

All as per item No 46 of above but 80 mm bore sluice valve

Disconnecting and removing from existing foundation motor at Stage -I,100 HP, 3 phase, 50 Hz including pump set from site to work shop and vice versa opening the motor, cutting and removing the burnt winding and cleaning of slots and rewinding with the super enamel copper wire (as per existing no of turns) with suitable size including replacement of terminal plate connecting and refixing at existing foundation including testing complete after repair all as specified and directed .Note:- The cost of loading, unloading including transportation for carrying of this item from Pump House to workshop and back shall to be included in the unit rate of this item.

All as per Item No. 51 above but Submersible pumping set(Stage-I & II)/Monobloc Pumping set (Swimming Pool) of capacity 5 to 15 HP.

Taking up or down old unserviceable corroded existing 20/25 mm bore steel water tubing & connections including all fittings and fixtures, laid in trenches or fixed along the walls or in any position, complete all as specified and as directed .

All as per item No 52 here-in-before but 40 mm bore.

All as per item No 52 here-in-before but 50 mm bore.

All as per item No 52 here-in-before but 80 mm bore.

All as per item No 52 here-in-before but 100 mm bore.

All as per item No 52 here-in-before but 150 mm bore.

Supply, laying, connecting & testing of 20/25 mm bore steel water tubing galvanized medium grade, with all fittings & fixtures (ISI marked) laid in trenches or fixed along walls or in any position complete all as specified and as directed .

All as per item No 58 but bore 40 mm.

All as per item No 58 but bore 50 mm.

All as per item No 58 but bore 80 mm

All as per item No 58 but bore 100 mm

Supply, laying, jointing and testing of MS ERW pipe line medium grade 150 mm dia (ISI marked) both end flanged with and including MS flange 20 to 25 mm thick consisiting 12 holes with 12 Nos bolts and nuts, washer and compressed fiber board 3 mm thick rubber sheet and all MS fitings including taking out existing unserviceble pipe line with burning out joints and recovering lead complete all as specified and as directed . Note for item No 58 to 63 :- Excavation and earth work shall be measured and paid seperately under respective item of this schedule.

M&L for jointing and testing CI fiting such as bend any type, any radius and angle, tapers any type (straight, bends for pieces increasing/decreasing or double socket, dead flange any size etc) tee pieces, single branch Y junction, double branch, cross, collars,caps and plugs upto 150mm bore pipe with spigot and socket ends Incl lead joints complete all as spcified and directed. (Note: Excavation & earth work shall be measured and paid separately)

Supply, fixing & testing sluice valve PN-1 (ISI marked ) confirming to IS-14846-2000 with brass spindle, and fly nut flanged both ends & drilled for jointing, wheel head type including two flanged joints with nuts, bolts, washers & rubber insertion packing etc for 250/200 mm bore pipe as in repair complete including taking out unserviceable sluice valve 250/200 mm bore from pipeline and removing from site complete all as specified and directed .

All as per item No. 65 above but 150 mm bore

All as per item No. 65 above but 100 mm bore

All as per item No. 65 above but 80 mm bore

Dismantling opening and overhauling of pump set multi stage capacity 10000 GPH at Stage -II, head 600/1200 feet from site to workshop including repair/replacement of parts listed below reassembling the pump commissioning and testing after repairs including necessary welding work, gasket, packing, nuts bolts and washers atc complete all as dpecified and directed:- (a) Neck bush GM - 06 Nos, (b) Impeller GM - 05 Nos (c) Neck ring GM - 04 Nos (d) Diffuser CI - 03 Nos (e) Shaft Key - 06 Nos (f) Shaft Sleeve - 02 Nos (g) Balancing Disk SS - 02 Nos (h) balancing bush,bearing and packing glands as per existing size including disconnecting and removing from existing foundation of pumping set 100 HP,3 phase,50 Hz incl mortar at stage-I and refixing at existing foundation incl testing complete after repair. Note:The cost of loading, unloading including transportation for carrying of this item from site to workshop and back shall to be included in the unit rate of this item.

S&F in replacement of 150 mm dia bore MS foot valve MS flanged as per IS code standard internals leather/rubber washer,bolt including necessary gasket complete all as specified and directed.

All as per item ser No 70 but of size 100mm dia bore

M&L for Brick masonry valve pit of size 90cm x 90 cm x 105cm internal dimension of chamber including plastering internally and flush pointing externally in cement mortar 1:4 complete with MS sheet cover 3 mm thick with handle and locking arrangement over and including 40 x 40 x 6mm thick angle iron frame including earth work and applying two coats of synthetic enamel paint over a coat of red oxide primer complete in and outer side of the MS sheet cover and angle iron frame complete all specified and as directed.

All as per ser No 72 above but of size 105 x 105 x 110 cm.

M&L for jointing of 150mm bore MS flanged pipes with 25mm thick (as in repair) M.S flange having 8 to 12 holes and including 3mm thick rubber gasket (packing) incluing provision of suitable size of Nuts bolts and double washer for each point and necessary welding work to arrest water leakage complete all as specified and as directed

M&L for calibration of relay by replacing unserviceable contactors of existing make and size fixed in starter panel for 100 HP Monoblock pumpset including testing and connection by authorised service engineers incl replacement of all burnt wiring, connectors etc complete all as specified and as directed.

Supply & fixing in replacement of Busbar chamber comprising of 3 copper strips 400 Amp & one copper strip of cap 200 Amps and minimum length 460mm long enclosed in sheet metal enclosure including all the fixing arrangements, making all incoming and out going connections through the lugs/thimbles all as specified and directed.Make:Havell's Cat No: IHBB040004) /Siemens/ Indo Asian.

Taking out unserviceable Air release valve of 50 mm bore with all fitting and S&F air release valve of size 50 mm complete with air outlets fixed with nuts bolts and packing material for CI/MS water mains of 50 mm bore flanged pipe complete all as specified and as directed

Taking out unserviceable Air release valve of 100 mm bore with all fitting and S&F air release valve of size 100 mm complete with air outlets fixed with nuts bolts and packing material for CI/MS water mains of 100 mm bore flanged pipe complete all as specified and as directed

All as per Sl Item No. 78 but 80mm bore

S&F gun metal gate or globe valves heavy duty yoke type, full way openig with iron wheel head screwed with both end of GI tubing 50 mm bore ISI marked including taking down of unserviceable gate or globe valve all as specified and directed.

All as per Sl Item No. 80 but tubing 40 mm bore

All as per Sl Item No. 80 but tubing 25 mm bore

All as per Sl Item No. 80 but tubing 20 mm bore

All as per Sl Item No. 80 but tubing 15 mm bore

S&F as in repair cast steel body reflux valve (non return valve) with by pass arrangement having dia 150 mm heavy duty class 300 all as specified in repair.

Dismantling and Taking down unserviceable sleeve and M & L for new Stainless steel sleeve suitable for 100 HP Pumpset including all necessary fixing accessories complete all as specified and directed

M&L for Packing Glands of size 19 mm complete all as specifed and directed

M&L for Packing Glands of size 12 mm complete all as specifed and directed

M&L for Packing Glands of size 10 mm complete all as specifed and directed

M&L for Packing leather sheet 4 mm thick complete all as specifed and directed

M&L for lose rubber bag suitable for Avon bleaching powder dozer 110 ltrs cap complete all as specified and directed by Engr-in-Charge

M&L for coupling bush suitable for 100 HP Centrifugal pump/Squirrel cage motor complete all as specified and directed.

M&L in replacement of clamps, nuts,bolts and washers as per site requirement for connection of CI/MS pipe of size upto 150 mm bore complete all as directed.

M&L for existing old painted surface upto 250mm of MS/GI pipe of suction,delivery,Sluice valve,Non return valve, header ,flange ,channels, angle incl 100 HP centrifugal /squirrel cage induction motor with pump etc by brooming down with steel wire brushing .scraping down the corroded MS/GI pipe and applying new painting as per existing colour with written a letter suction,delivery line incl direction of flow (arrow mark) with two coat of synthetic enamel paint over a coat of red oxide for Stage-I & II complete all as directed.

Material and Labour for collecting water sample from Stage II Pump House , packing it safely in sterlized bottles as required quantity and send it to approved govt laboratory test lab or other approved labs for testing of portable water/raw water as per IS10500 with following parameters colour,odour,turbidity,conductivity,TDS,PH,alkalinity,hardness,calcium,magnessium,iron,manganese,ammonia,nitrate,nitrite,chloride,fluoride,sulphite,phosphate,silica,free chlorine and special element tests all directed by Engr -In- Charge .Note: Tpt for this item is included in this quoted rate.No extra payment will be made for it.

Supply and fix chlorine granule dozing system (Model ADS-I including 100 Ltrs PE/FRP tank with epoxy lid & level indicator mounted on tank ) provision of O ring for water/altoch feeding including necessary connection arrangement to dozing pump complete with agitator motor 90 watts 230 volts 50 Hz 0.2 Amps class 'B' insulation including shaft & blade in SS 316(FRP) epoxy coated the out let of the pump directly connected with delivery line and speed control regulator for agitator motor complete including taking down unserviceable motor/solution tank all as directed

Supply and replacing Rubber Star Coupling suitable for up to 100 HP Pumpset , including taking down of existing couplers complete all as directed.

Material and labour for cement concrete in foundations or pipe support or coping or any other work type B2 1:2:4 with 40 mm graded crushed stone aggregate all as directed

Supply and fix voltmeter digital type 0- 500 volts including taking down unserviceable volt meter all as directed.

Supply and fix Ammeter digital type 0- 200 Amps with necessary CTs 3 nos of range 100/5 including taking down unserviceable Ammeter all as directed

Disconnecting and removing from existing foundation of squirrel cage induction motor 100 HP,2800 RPM,3 phase,50 Hz incl pump set at stage-II,opening the motor,cutting and removing the burnt winding and cleaning of slots and rewinding with super enamelled copper wire as per existing Nos of turns with suitable size incl replacement of terminal plates connecting,rotating starter winding,steel lamination bearing shaft etc. as per existing of this one and refixing at existing foundation all as directed. Note: Loading/unloading incl transportation for carrying of this item from installation to workshop and back is included in this quoted rate.

S&F in replacement of water pressure gauge upto pressure 1000kg/cm3 for measuring water pressure complete all as specified and directed.

S&F in replacement of 100/150 mm dia bore PVC foot valve with flanged as per IS code standard internals leather/rubber washer,bolt including necessary gasket complete all as specified and directed.

M&L in replacement of Smart i ipro Metal Water level indicator with alarm on tank full with 5 sensor of size 16x7x5cm , inbuilt mechanism to detect/indicate the water level show the percentage 25%,50%,75% and full of Over head tank complete all as specified and directed.

S&F in replacement of Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for preparation & Painting new steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primers for surfaces exc 10 cm width or grith complete all as specified and directed.

Supply and fixing in replacement of Magnetic pickup unit of 15 KVA to 125 KVA DG Sets all as specified and directed.

Supply and fixing in replacement of Hose Rubber: Engine to Radiator for 15 KVA to 125 KVA DG Sets all as specified and directed.

Supply and fixing in replacement of Hose Rubber: Radiator to Engine for 15 KVA to 125 KVA DG Sets all as specified and directed.

Supply and fixing in replacement of Clamp Hose Bend Type for 15 KVA to 125 KVA DG Sets all as specified and directed.

Supply and fixing in replacement of Seal Oil (Front) for 15 KVA to 125 KVA DG Sets all as specified and directed.

Supply and fixing in replacement of Stop Solenoid 3R unit suitable for 15 KVA to 125 KVA as prescribed by the manufacturer.

Supply and fixing in replacement of water separator with complete assembly for 15 KVA to 125KVA complete all as specified and directed.

Supply and fixing in replacement of fuel pipe for tank to filter with necessary fixing arrangement complete all as specified and directed.

Supply and fixing in replacement of Lubrication oil pressor sensor suitable for 15 KVA to 125 KVA DG Sets all as specified and directed.

Supply and fixing in replacement of battery 12 volt,80AH (Heavy Duty maintenance free) complete all as specified and as directed.

Supply and fixing in replacement of battery 12 volt,180AH (Heavy Duty maintenance free) complete all as specified and as directed.

Supply & Replacment of Kirloskar Oil of grade 15W - 40 or as specified by manufacturer for topping up or replacement of lubricating oils during different checks complete all as specified and as directed.

Supply, Install, jointing, connecting and testing complete Automatic Star-Delta starter suitable for 100 HP , 110 KW, 415 Volts in stainless steel housing IP 54 protection class with built in relays suitable for 100 HP pump set including dismantling/taking out unserviceable existing starters complete all as specified and directed. Make :- Siemens or equivalant in L & T, ABB

Opening of Alternator and separte the stator, rotor assambly of 125 KVA DG Set and taking down burnt winding from stator, exciter field and rewinding of stator with dual coated supper enameld copper conductor of existing gauge with 'H' class insulation coating including replacement of fibre glass (H71A) tape, sleeves, slot wedges, terminal lead etc and varnishing of complete winding with 'H' Class insulating level varnish and babofill resin ,drying the varnish by backing process and reassemble the alternator complete all as directed. Make of Varnish - Dr Beck or equivalent of 'H' class insulation

Meterial and labour for rewinding of exciter rotor with dual coated supper enameld copper conductor of existing gauge including replacement of fibre glass tape sleeves etc and varnishing of complete winding with 'H' Class insulating level varnish and babofill resin ,drying the varnish by backing process all as directed.

Meterial and labour for taking down the rotor bearing of the alternator by puller and supply fix new bearing of existing size all as directed Make - NBC,SKF or equivalent as approved by GE.

Meterial and labour for taking down the unserviceable diode from exciter and fixing of new diode as per existing rating complete all as directed

Meterial, T&P and labour for loading, unloading of alternator ,transportation from site to workshop and Workshop to site for rewinding of alternator all as directed

Material and labour for cleaning of rotor pole coils, varnishing the coil including removing the corbon particles from rotor and greasing the main bearing of rotor assembly complete all as directed.

M&L in replacement of cartridge(5484) filter for cleaningof swimming Pool floor complete al as directed.

Bairagi Builders

M/s Shiksha Enterprises

M/S BALWINDER SINGH