Loading
Loading…
Loading…
Tender Value
₹8.7 Cr
EMD Value
₹17.4 L
Closing Date
30 May 2026, 11:00 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
WORKS
14 conditions · 3 needing a document upload
"Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or "V" whichever is less crores; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited, The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover, The tenderers shall submit requisite information as per Annexure-Vlll along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
"(a)The tenderer must have successfully completed/substentially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b) (i) In case of composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed/substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works , each costing not less than the amount equal to 40% of advertised value of each component of tender, ora One similar work, each costing not less than the amount equal to 60% of advertised value of each component of tender. Note: Separate completed works of minimum required values for each component can also be considered for fulfillment of technical eligibility criteria. (b) (ii) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. Any work or set of works shall be considered to be a separate component, only when cost of the component is more than Rs. 2 crore each. The tenderer shall submit the completion certificate as per proforma given in annexure-IV-A or IV-B or IV-C as applicable or in the format containing all information as required as per the Annex. IV-A or IV-B or IV-C. Note :- Criteria for the completed work/Substantially completed has been given in the General instructions in the tender document."
Definition of Similar Work :- Any RRI/PI/EI/MACLS Supply, Installation Testing, Commissioning Signaling work OR Any RRI/PI/EI/MACLS Alterations Signalling work OR Any CTC/TMS work
67 conditions · 7 needing a document upload
Mandatory in case Bid security amount is prescribed in STD Para 5.1.2 - The Bid Security shall be deposited in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- XXXII and shall be valid for a period of 90days beyond the bid validity period.
In case the tenderer is (i)Any firm recognized by Department of Industrial Policy and Promotion (DIPP) as 'Startups' - shall be exempted from payment of Bid security deposit and shall submit certified copy of the registration/ Valid document issued by DIPP (mandatory if applicable)
In case the tenderer is (iii) Labour Cooperative Societies - shall deposit only 50% of the Earnest Money Deposit and shall submit certified copy of the registration/ Valid document issued by the relevant Ministry/ Labour commission (mandatory if applicable).
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Railway board letter No.2017/CE-I/CT/9 dtd. 31.05.2023 regarding implementation of 'Contrator's e-MB' for Measurement and Billing of Works contracts in IR-WCMS on Zonal Railways will be applicable in this contact.
Railway Board letter no.2021/Tele/5(2)/3-Part(1)(3425647) Dated 12.06.2023 regarding Procedure for undertaking digging work in the vicinity of Signalling, Electrical and Telecommunication cables shall be followed.
Indoor and outdoor signaling and telecom work in connection with new line in between POK-RDRA via Bhairav Gufa-Kailash Tehri (13.38 km) along with alteration in existing Kyosan make Electronic Interlocking of POK and RDRA station of Jodhpur Division, NWR.
SnT_C_JU_26-27-01R
SnT_C_JU_26-27-01R
Open
Works - General
18 Months
Jodhpur, Rajasthan
₹0
₹17.4 L
30 May 2026
8 May 2026
16 May 2026
231 items across 14 schedules · ₹5,65,38,709.38 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | of work station note book / as per Technical Specifications. It includes supply of Laser Printer branded). The workstation should capable of reconfiguring the system case of any alteration in yard interlocking in future. Technical Specifications should be attached with tender document by Tendering o r i t y. Inspection: Consignee charges: None Payment 100% after supply | Station | 1.00 | 1,04,575.4 | 1,04,575.4 |
| 2 | of Instruments and Tool Kits for Trouble Shooting and of hardware and software for EI should be supplied for stations. includes tools required for EI maintenance sorts of crimping, removal, general purpose like screw drivers, spanners, PCB temp. controlled soldering wire cutter, nose pliers etc. & instruments with carrying holders/ cabinet for technicians/ testing, Maintenance and repair site). Each set comprises of the :- * Crimping tool for all types special cable assembly used in EI * Insertion tool for all types of cable assembly used in EI *Removal tool for all types of cable assembly used in EI * Digital multi-meter (Fluke or better) * Steel cabinet/ Almira, 1980mm height, 915 mm width 485 mm depth (Godrej Make/Jalaram) of good quality to store spare cards and documents. * Book rack Size: 1850mm height, mm width and 316 mm depth for documents. (Godrej Make/Jalaram) * Clamp Earth Tester. per specs mentioned in tender document.) * Clamp Current Meter 362 or superior) * Ferrule tagging for cable/wires (Supported label sizes: 6 / 9 / 12 / 18 / 24 mm). Inspection: Consignee Inspection None Payment terms: 100% supply | Set | 1.00 | 1,51,338.52 | 1,51,338.52 |
| 3 | of Technician/ Jr. Engineer for installation, Commissioning, Testing, & Troubleshooting of EI system. copies of training material/ modules to be given to each participant). Inspection: Consignee charges: None Payment 100% after execution | Man-Days | 5.00 | 1,331.35 | 6,656.75 |
| 4 | preparation & supply of in computer print copies and tracing in AUTO CAD FORMAT Electronic Interlocking at each After completion of the work, completion drawings incorporating completion details are to be supplied as Technical Specifications given in document (upto 6 Line). The specifications are as per ANNEXURE-01010100 of SOR. Inspection: Consignee Inspection None Payment terms: 100% execution | Station | 2.00 | 2,11,776.71 | 4,23,553.42 |
| 5 | Preparation of SWR literature in English with associated mid-section interlocked gate with all corrections as approved SWRD & approved SIP. these all-technical corrections, grammatical correction etc. are carried out and one rough print to given to railways for approval before as required for final of CRS sanction. This also preparation of maintenance in format provided by Rly. Inspection: Consignee Inspection None Payment terms:100% execution. | Station | 2.00 | 4,330.94 | 8,661.88 |
| 6 | of Station Working Rules English to Hindi and framing out in form (or similar software) as extant Rly practice. The required in English will be provided by the and has been covered in item no. 01011800 of 1 of SOR. Inspection: Inspection charges: None terms:100% after execution. | Station | 2.00 | 5,389.49 | 10,778.98 |
| 7 | photocopies & binding of the literature in English/Hindi/Diglot as per Railway practice. Inspection: Consignee Inspection None Payment terms:100% execution. | Set | 20.00 | 214.85 | 4,297 |
| 8 | of maintainer's furniture of make or superior and each set of (i) executive revolving series low back-floating chair normal arms cushioned chair-01 . (ii) Executive table size 1650x900x728 mm with 3 drawers one locker- 01 no. (iii) visitor chair seat cushion with high density foam plastic PVC handle capsule type back-03 nos. Inspection: Inspection charges: None terms:100% after execution. | Set | 1.00 | 27,664.71 | 27,664.71 |
| 9 | Preparation and supply of laminated set of all the completion plans circuit diagrams and indoor well as outdoor completion documents on standard 75-micron film for station in Auto CAD. 6 sets xerox copies will also be for each of the documents below: Cable Route Plan, Core Chart, Location details plan the locations, Cable termination Signalling Plan, SWR Diagram, Diagrams, Selection table, table, Contact analysis, Fuse Tag Block analysis of Relay Rack, rack, Control cum Indication Diagram, Power Panel Track circuit plan, rack plan and Junction Box details Inspection: Consignee Inspection None Payment terms:100% execution. | Sheet | 350.00 | 193.85 | 67,847.5 |
| 10 | Addition/alteration in existing relay wiring. It includes supply of PVC indoor Railway signalling @40<45@Core/40-Core) of sqmm as per RDSO Spee. No. IRS/S-76/89 (Amnd.2 or latest) for between relay room and room & Relay room to DP in office for block working. This also supply of PVC insulated wires of multi strand 16/.2 mm, in all colours as per RDSO Specn.No.IRS-S-76/89(Amnd.2 or This item will include bringing power supplies from power room respective bus bars on relay racks using 10/6 sqmm copper flexible as per instructions of engineer This will include wiring control panel and relay room required. All wiring will be done as standard practice of North Western with neat dressing & threading. item includes supply & wiring of block, fuse with bases (G-Type and Type) and all other related material for complete indoor wiring in room. Inspection: Consignee charges: None Payment terms:100% after execution. | Per Relay | 50.00 | 630.75 | 31,537.5 |
| & Installation of Modular power arrangement for VDU and PC (Embedded PC) with input output redundancy arrangement Hot pluggable Modules as per specification. Make Gallant or One set consists of 1. Input O- diode module with potential free -1 contacts (PFC) for two 110 V DC from IPS and single 110 VDC Qty 1 No. 2. Isolated Inverters / slave) - Input-110 V DC 120 V AC/220V A500VA - 02 3. Isolated DC-DC convertors- 110 v DC Output: 24 V DC/ 10A, -10Nos. 4. 3 U SS rack with back mother board /front panel power connectors inverter auto change over and all required over switch and required protection circuits (3U for main rack 132.5mm +/-10% height for mounting 44.5mm +/- Qty - 1 No. Make Gallant or (This item is for Operating of EI system) Inspecting Agency : inverters and converters : RDSO for other items : Consignee Charges: (i) Borne by (ii) None | — | — | — | — | |
| 11 | Supply of Modular power supply arrangement. Payment Terms: 100% Supply | Set | 2.00 | 2,18,289.6 | 4,36,579.2 |
| 12 | Installation of Modular power arrangement. Payment Terms: after Commissioning | Set | 2.00 | 54,572.4 | 1,09,144.8 |
| Schedule total | ₹13,82,635.66 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC-2022.pdf
ATTACHMENT
ACS-1to11.pdf
ATTACHMENT
TentativeESPofPOKRANSTATION.pdf
ATTACHMENT
TentativeESPofRAMDEVRASTATION.pdf Tentative ESP of RAMDEVRA STATION
ATTACHMENT
ExistingSIPofPOKRANStation.pdf
ATTACHMENT
ExistingSIPofRAMDEVRAStation.pdf
ATTACHMENT
TentativeESPofRAMDEVRASTATION.pdf
ATTACHMENT
TenderDocumentSnT_C_JU25-26-01R.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .