Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.0 LAccepted-AOC | L1 | Accepted-AOC lowest | |
| 2 | L2₹39.9 L+₹1.4 L (3.71%)Rejected-Finance MANDIR ROAD NEW ABADI AKALGARH AIR FORCE STATION HALWARA TEH RAIKOT DISTT LUDHIANA PB 141106 | LUDHIANA | LUDHIANA | PUNJAB | 141106 | L2 | Rejected-Finance other than lowest | |
| 3 | L3₹43.0 L+₹4.5 L (11.8%)Rejected-Finance 5B FF NAND VIHAR AZAD NAGAR NEAR GODARA PETROL PUMP HISAR HARYANA 125001 | HISAR | HARYANA | 125001 | L3 | Rejected-Finance other than lowest | |
| 4 | L4₹46.4 L+₹7.9 L (20.6%)Rejected-Finance | L4 | Rejected-Finance other than lowest | |
| 5 | L5₹47.1 L+₹8.7 L (22.6%)Rejected-Finance | L5 | Rejected-Finance other than lowest |
| Sl No | Description | Qty | Unit | Kular and Company L2 | SUN MANN ENGINEERS L3 | KULBHUSHAN AGGARWAL L5 | M/S SEALINE BUILDERS L1 | RUHI ASSOCIATES L4 |
|---|---|---|---|---|---|---|---|---|
| 1.00Sch 'A' | ||||||||
| 1.01 | Supply, installng, testing and commissioning floor mounted LT panel outdoor type of size 1.6 x 1.2 x 0.6 mtr cubical type factory made, weather and vermin proof made out of CRCA sheet 3 mm thick and angle iron frame of 40x40x6mm and 04 Nos legs of angle iron 50x50x6mm each 90 cm long panel duly powder coated having insulated bus bar TPN with openable shutter on both side (Front and rear side) with locking arrangement duly pre-wired with suitable size of copper conductor cable with proper size of copper lugs/thimbles,with cable gland and connecting to MCCBs with suitable size aluminium strip duly bended and fixed with nut & bolts and washers from bus bar to MCCBs and legs grouted in PCC 1:2:4 type B1 (20 mm graded crushed stone aggregate Powder Coated Spray painted from outside and inside with approved stove enameled grey paint two coats over one coat of red oxide primer including taking out old unserviceable panel complete as under:-(i) Aluminium bus bar strip of capacity 500 amps fixed on epoxy insulator - 04 Nos
(ii) Incomming MCCB of current rating 315 Amps with microprocessor release 4 pole 415 volts 35 KA repturing capacity - 01 Nos.
(iii) Out going MCCB of current rating 250 Amps with microprocessor release 4 pole 415 volts 25 KA repturing capacity - 02 Nos
(iv) Digital voltmeter (0-500 volt) 96x96mm square type with inbuilt selector switch - 01 Nos
(v) Digital ampearmeter (0-600 amps) 96x96mm square type with CTs in built selector switch - 01 Nos
(vi) Set of phase indicator lamp R,Y,B with control MCB - 01 Set.
(vii) MCB SPN 6 to 32 amp-01 Nos | 1 | Each | 1,31,000 ₹1,31,000 | 1,39,000 ₹1,39,000 | 1,46,000 ₹1,46,000 | 1,25,500 ₹1,25,500 Lowest | 1,55,000 ₹1,55,000 |
| 2.00 | Supply, installng, testing and commissioning floor mounted LT panel outdoor type of size 1.6 x 1.2 x 0.6 mtr cubical type factory made, weather and vermin proof made out of CRCA sheet 3 mm thick and angle iron frame of 40x40x6mm and 04 Nos legs of angle iron 50x50x6mm each 90 cm long panel duly powder coated having insulated bus bar TPN with openable shutter on both side (Front and rear side) with locking arrangement duly pre-wired with suitable size of copper conductor cable with proper size of copper lugs/thimbles,with cable gland and connecting to MCCBs with suitable size aluminium strip duly bended and fixed with nut & bolts and washers from bus bar to MCCBs and legs grouted in PCC 1:2:4 type B:1 (20 mm graded crushed stone aggregate Powder Coated Spray painted from outside and inside with approved stove enameled grey paint two coats over one coat of red oxide primer including taking out old unserviceable panel complete as under:-
(i) Aluminium bus bar strip of capacity 500 amps fixed on epoxy insulator - 04 Nos
(ii) Incomming MCCB of current rating 315 Amps with microprocessor release 4 pole 415 volts 35 KA repturing capacity - 01 Nos.
(iii) Out going MCCB of current rating 250 Amps with microprocessor release 4 pole 415 volts 25 KA repturing capacity - 01 Nos
(iv) Out going MCCB of current rating 160 Amps with microprocessor release 4 pole 415 volts 25 KA repturing capacity - 01 Nos
(v) Digital voltmeter (0-500 volt) 96x96mm square type with inbuilt selector switch - 01 Nos
(vi) Digital ampearmeter (0-600 amps) 96x96mm square type with CTs in built selector switch - 01 Nos
(vii) Set of phase indicator lamp R,Y,B with control MCB - 01 Set (viii) MCB SPN 6 to 32 amp-01 Nos | 1 | Each | 1,31,000 ₹1,31,000 | 1,36,000 ₹1,36,000 | 1,46,000 ₹1,46,000 | 1,22,500 ₹1,22,500 Lowest | 1,49,000 ₹1,49,000 |
| 3.00 | Supply, installng, testing and commissioning floor mounted LT panel outdoor type of size 1.6 x 1.2 x 0.6 mtr cubical type factory made, weather and vermin proof made out of CRCA sheet 3 mm thick and angle iron frame of 40x40x6mm and 04 Nos legs of angle iron 50x50x6mm each 90 cm long panel duly powder coated having insulated bus bar TPN with openable shutter on both side (Front and rear side) with locking arrangement duly pre-wired with suitable size of copper conductor cable with proper size of copper lugs/thimbles,with cable gland and connecting to MCCBs with suitable size aluminium strip duly bended and fixed with nut & bolts and washers from bus bar to MCCBs and legs grouted in PCC 1:2:4 type B:1 (20 mm graded crushed stone aggregate Powder Coated Spray painted from outside and inside with approved stove enameled grey paint two coats over one coat of red oxide primer including taking out old unserviceable panel complete as under:-
(i) Aluminium bus bar strip of capacity 400 amps fixed on epoxy insulator - 04 Nos
(ii) Incomming MCCB of current rating 250 Amps with microprocessor release 4 pole 415 volts 35 KA repturing capacity - 01 Nos.
(iii) Out going MCCB of current rating 125 Amps with microprocessor release 4 pole 415 volts 16 KA repturing capacity - 01 Nos
(iv) Out going MCCB of current rating 63 Amps with microprocessor release 4 pole 415 volts 25 KA repturing capacity - 01 Nos
(v) Digital voltmeter (0-500 volt) 96x96mm square type with inbuilt selector switch - 01 Nos
(vi) Digital ampearmeter (0-600 amps) 96x96mm square type with CTs in built selector switch - 01 Nos
(vii) Set of phase indicator lamp R,Y,B with control MCB - 01 Set
(viii) MCB SPN 6 to 32 amp-01 Nos | 1 | Each | 1,11,000 ₹1,11,000 | 1,14,000 ₹1,14,000 | 1,27,500 ₹1,27,500 | 1,02,000 ₹1,02,000 Lowest | 1,39,000 ₹1,39,000 |
| 4.00 | Supply, installng, testing and commissioning floor mounted LT panel outdoor type of size 1.6 x 1.2 x 0.6 mtr cubical type factory made, weather and vermin proof made out of CRCA sheet 3 mm thick and angle iron frame of 40x40x6mm and 04 Nos legs of angle iron 50x50x6mm each 90 cm long panel duly powder coated having insulated bus bar TPN with openable shutter on both side (Front and rear side) with locking arrangement duly pre-wired with suitable size of copper conductor cable with proper size of copper lugs/thimbles,with cable gland and connecting to MCCBs with suitable size aluminium strip duly bended and fixed with nut & bolts and washers from bus bar to MCCBs and legs grouted in PCC 1:2:4 type B:1 (20 mm graded crushed stone aggregate Powder Coated Spray painted from outside and inside with approved stove enameled grey paint two coats over one coat of red oxide primer including taking out old unserviceable panel complete as under:- (i) Aluminium bus bar strip of capacity 300 amps fixed on epoxy insulator - 04 Nos
(ii) Incomming MCCB of current rating 200 Amps with microprocessor release 4 pole 415 volts 25 KA repturing capacity - 01 Nos.
(iii) Out going MCCB of current rating 100 Amps with microprocessor release 4 pole 415 volts 25 KA repturing capacity - 03 Nos
(iv) Digital voltmeter (0-500 volt) 96x96mm square type with inbuilt selector switch - 01 Nos
(v) Digital ampearmeter (0-600 amps) 96x96mm square type with CTs in built selector switch - 01 Nos
(vi) Set of phase indicator lamp R,Y,B with control MCB - 01 Set
(vii) MCB SPN 6 to 32 amp-01 Nos | 1 | Each | 1,21,000 ₹1,21,000 | 1,25,000 ₹1,25,000 | 1,37,500 ₹1,37,500 | 1,13,000 ₹1,13,000 Lowest | 1,49,000 ₹1,49,000 |
| 5.00 | Supply, installng, testing and commissioning floor mounted LT panel outdoor type of size 1.6 x 1.2 x 0.6 mtr cubical type factory made, weather and vermin proof made out of CRCA sheet 3 mm thick and angle iron frame of 40x40x6mm and 04 Nos legs of angle iron 50x50x6mm each 90 cm long panel duly powder coated having insulated bus bar TPN with openable shutter on both side (Front and rear side) with locking arrangement duly pre-wired with suitable size of copper conductor cable with proper size of copper lugs/thimbles,with cable gland and connecting to MCCBs with suitable size aluminium strip duly bended and fixed with nut & bolts and washers from bus bar to MCCBs and legs grouted in PCC 1:2:4 type B:1 (20 mm graded crushed stone aggregate Powder Coated Spray painted from outside and inside with approved stove enameled grey paint two coats over one coat of red oxide primer including taking out old unserviceable panel complete as under:- (i) Aluminium bus bar strip of capacity 400 amps fixed on epoxy insulator - 04 Nos
(ii) Incomming MCCB of current rating 250 Amps with microprocessor release 4 pole 415 volts 25 KA repturing capacity - 01 Nos.
(iii) Out going MCCB of current rating 160 Amps with microprocessor release 4 pole 415 volts 25 KA repturing capacity - 02 Nos
(iv) Digital voltmeter (0-500 volt) 96x96mm square type with inbuilt selector switch - 01 Nos
(v) Digital ampearmeter (0-600 amps) 96x96mm square type with CTs in built selector switch - 01 Nos
(vi) Set of phase indicator lamp R,Y,B with control MCB - 01 Set
(viii) MCB SPN 6 to 32 amp-01 Nos | 1 | Each | 1,21,000 ₹1,21,000 | 1,23,000 ₹1,23,000 | 1,37,500 ₹1,37,500 | 1,10,000 ₹1,10,000 Lowest | 1,49,000 ₹1,49,000 |
| 6.00 | Supply, installng, testing and commissioning floor mounted LT panel outdoor type of size 1.6 x 1.2 x 0.6 mtr cubical type factory made, weather and vermin proof made out of CRCA sheet 3 mm thick and angle iron frame of 40x40x6mm and 04 Nos legs of angle iron 50x50x6mm each 90 cm long panel duly powder coated having insulated bus bar TPN with openable shutter on both side (Front and rear side) with locking arrangement duly pre-wired with suitable size of copper conductor cable with proper size of copper lugs/thimbles,with cable gland and connecting to MCCBs with suitable size aluminium strip duly bended and fixed with nut & bolts and washers from bus bar to MCCBs and legs grouted in PCC 1:2:4 type B:1 (20 mm graded crushed stone aggregate Powder Coated Spray painted from outside and inside with approved stove enameled grey paint two coats over one coat of red oxide primer including taking out old unserviceable panel complete as under:- (i) Aluminium bus bar strip of capacity 500 amps fixed on epoxy insulator - 04 Nos
(ii) Incomming MCCB of current rating 315 Amps with microprocessor release 4 pole 415 volts 35 KA repturing capacity - 01 Nos.
(iii) Out going MCCB of current rating 100 Amps with microprocessor release 4 pole 415 volts 25 KA repturing capacity - 06 Nos
(iv) Out going MCCB of current rating 63 Amps with microprocessor release 4 pole 415 volts 25 KA repturing capacity - 02 Nos
(v) Digital voltmeter (0-500 volt) 96x96mm square type with inbuilt selector switch - 01 Nos
(vi) Digital ampearmeter (0-600 amps) 96x96mm square type with CTs in built selector switch - 01 Nos
(vii) Set of phase indicator lamp R,Y,B with control MCB - 01 Set
(viii) MCB SPN 6 to 32 amp-01 Nos | 1 | Each | 2,01,000 ₹2,01,000 | 1,80,000 ₹1,80,000 | 2,25,000 ₹2,25,000 | 1,55,000 ₹1,55,000 Lowest | 2,29,000 ₹2,29,000 |
| 7.00 | Supply, installng, testing and commissioning floor mounted LT panel outdoor type of size 1.6 x 1.2 x 0.6 mtr cubical type factory made, weather and vermin proof made out of CRCA sheet 3 mm thick and angle iron frame of 40x40x6mm and 04 Nos legs of angle iron 50x50x6mm each 90 cm long panel duly powder coated having insulated bus bar TPN with openable shutter on both side (Front and rear side) with locking arrangement duly pre-wired with suitable size of copper conductor cable with proper size of copper lugs/thimbles,with cable gland and connecting to MCCBs with suitable size aluminium strip duly bended and fixed with nut & bolts and washers from bus bar to MCCBs and legs grouted in PCC 1:2:4 type B:1 (20 mm graded crushed stone aggregate Powder Coated Spray painted from outside and inside with approved stove enameled grey paint two coats over one coat of red oxide primer including taking out old unserviceable panel complete as under:- (i) Aluminium bus bar strip of capacity 600 amps fixed on epoxy insulator - 04 Nos
(ii) Incomming MCCB of current rating 400 Amps with microprocessor release 4 pole 415 volts 35 KA repturing capacity - 01 Nos.
(iii) Out going MCCB of current rating 100 Amps with microprocessor release 4 pole 415 volts 25 KA repturing capacity - 01 Nos
(iv) Out going MCCB of current rating 63 Amps with microprocessor release 4 pole 415 volts 25 KA repturing capacity - 03 Nos
(v) Digital voltmeter (0-500 volt) 96x96mm square type with inbuilt selector switch - 01 Nos
(vi) Digital ampearmeter (0-600 amps) 96x96mm square type with CTs in built selector switch - 01 Nos
(vii) Set of phase indicator lamp R,Y,B with control MCB - 01 Set
(viii) MCB SPN 6 to 32 amp-01 Nos | 1 | Each | 1,41,000 ₹1,41,000 Lowest | 1,61,000 ₹1,61,000 | 1,70,000 ₹1,70,000 | 1,45,500 ₹1,45,500 | 1,69,000 ₹1,69,000 |
| 8.00 | Supply, installng, testing and commissioning floor mounted LT panel outdoor type of size 1.6 x 1.2 x 0.6 mtr cubical type factory made, weather and vermin proof made out of CRCA sheet 3 mm thick and angle iron frame of 40x40x6mm and 04 Nos legs of angle iron 50x50x6mm each 90 cm long panel duly powder coated having insulated bus bar TPN with openable shutter on both side (Front and rear side) with locking arrangement duly pre-wired with suitable size of copper conductor cable with proper size of copper lugs/thimbles,with cable gland and connecting to MCCBs with suitable size aluminium strip duly bended and fixed with nut & bolts and washers from bus bar to MCCBs and legs grouted in PCC 1:2:4 type B:1 (20 mm graded crushed stone aggregate Powder Coated Spray painted from outside and inside with approved stove enameled grey paint two coats over one coat of red oxide primer including taking out old unserviceable panel complete as under:- (i) Aluminium bus bar strip of capacity 300 amps fixed on epoxy insulator - 04 Nos
(ii) Incomming MCCB of current rating 200 Amps with microprocessor release 4 pole 415 volts 25 KA repturing capacity - 01 Nos.
(iii) Out going MCCB of current rating 160 Amps with microprocessor release 4 pole 415 volts 25 KA repturing capacity - 01 Nos
(iv) Out going MCCB of current rating 63 Amps with microprocessor release 4 pole 415 volts 25 KA repturing capacity - 03 Nos
(v) Digital voltmeter (0-500 volt) 96x96mm square type with inbuilt selector switch - 01 Nos
(vi) Digital ampearmeter (0-600 amps) 96x96mm square type with CTs in built selector switch - 01 Nos
(vii) Set of phase indicator lamp R,Y,B with control MCB - 01 Set
(viii) MCB SPN 6 to 32 amp-01 Nos | 1 | Each | 1,31,000 ₹1,31,000 Lowest | 1,54,000 ₹1,54,000 | 1,55,000 ₹1,55,000 | 1,37,500 ₹1,37,500 | 1,69,000 ₹1,69,000 |
| 9.00 | Supply, installng, testing and commissioning floor mounted LT panel outdoor type of size 1.6 x 1.2 x 0.6 mtr cubical type factory made, weather and vermin proof made out of CRCA sheet 3 mm thick and angle iron frame of 40x40x6mm and 04 Nos legs of angle iron 50x50x6mm each 90 cm long panel duly powder coated having insulated bus bar TPN with openable shutter on both side (Front and rear side) with locking arrangement duly pre-wired with suitable size of copper conductor cable with proper size of copper lugs/thimbles,with cable gland and connecting to MCCBs with suitable size aluminium strip duly bended and fixed with nut & bolts and washers from bus bar to MCCBs and legs grouted in PCC 1:2:4 type B:1 (20 mm graded crushed stone aggregate Powder Coated Spray painted from outside and inside with approved stove enameled grey paint two coats over one coat of red oxide primer including taking out old unserviceable panel complete as under:- (i) Aluminium bus bar strip of capacity 300 amps fixed on epoxy insulator - 04 Nos (ii) Incomming MCCB of current rating 200 Amps with microprocessor release 4 pole 415 volts 25 KA repturing capacity - 01 Nos.
(iii) Out going MCCB of current rating 160 Amps with microprocessor release 4 pole 415 volts 25 KA repturing capacity - 01 Nos
(iv) Out going MCCB of current rating 100 Amps with microprocessor release 4 pole 415 volts 25 KA repturing capacity - 01 Nos
(v) Out going MCCB of current rating 63 Amps with microprocessor release 4 pole 415 volts 25 KA repturing capacity - 01 Nos
(vi) Digital voltmeter (0-500 volt) 96x96mm square type with inbuilt selector switch - 01 Nos
(vii) Digital ampearmeter (0-600 amps) 96x96mm square type with CTs in built selector switch - 01 Nos
(viii) Set of phase indicator lamp R,Y,B with control MCB - 01 Set
(ix) MCB SPN 6 to 32 amp-01 Nos | 1 | Each | 1,31,000 ₹1,31,000 | 1,38,000 ₹1,38,000 | 1,90,000 ₹1,90,000 | 1,27,500 ₹1,27,500 Lowest | 1,49,000 ₹1,49,000 |
Tender Value
₹42.7 L
EMD Value
₹85,500
Closing Date
7 Nov 2025, 6:00 pmClosed
Garrison Engineer Ludhiana
Garrison Engineer Military Engineer Services Near Jagraon Bridge Ludhiana-141001 (Punjab)
Special Repair/replacement of LT Panels at Dholewal under GE Ludhiana
2025_MES_734682_1
GE/LDH-59/2025-26
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Dholewal
As per NIT and Tender documents
9 documents required · 9 mandatory
₹500
GE Ludhiana
₹85,500
Yes
13 Dec 2025
10 Oct 2025
10 Nov 2025
10 Oct 2025
7 Nov 2025
26 Oct 2025
10 Oct 2025 - 25 Oct 2025
Amount
Supply, installation, testing & Commissioning of OEM built outdoor 80 kVAr APFC panel in replacement of suitable size, having Circuit Breaker, Capacitor duty Contactor, Super heavy duty Power Capacitors, APFC Relay shall be of same OEM make. APFC Panel shall be OEM make, machine pressed, dust and vermin proof, indoor type, coated with 11 tank powder coating process to provide better protection against corrosion. The APFC panel will be fabricated out of 14/16 SWG CRCA sheet steel, free floor standing. APFC panel should have Insulated bus bar pan assembly made from copper of suitably rated capacity. The capacitors shall be encapsulated in an aluminium can. All vital components of APFC panel i.e. capacitors, contactors, APFC relay should be of same OEM make. Advanced Range PF Regulator / micro-processor based APFC relay having 8/12 steps with LCD Display with a built in RS 485 communication port. The capacitor duty contactors shall be used for switching 'on' and switching 'off' operations in capacitor banks. Also, the Capacitor used should be of Super Heavy Duty MPP type with Penta safety, Capacitors used should be ISI mark and having BIS certification. Step size of capacitors for 80KVAR would be = 5 (15 kVAr) + 1 (5 kVAr)
Material & labour earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed with layers of charcoal dust and common salt, earth electrode GI strip 32 x 6mm connected to GI earth plate electrode by means of bolts, nuts, check nuts and washers of galvanized iron and thimbles and other end of earth strip connected to test point and protected by galvanized iron light grade 50mm bore and GI pipe 20mm bore light grade with funnel and wire mesh for watering including necessary excavation and earth works. PCC chamber in cement concrete (1:3:6) type C-2 using graded stone aggregate and pre cast RCC cover in 1:2:4, type B-I and all as shown in Electrical Plate No. 3 of MES Schedule (Part-I) of 2009 complete all as specified and directed. Notes : (i) Outer edge of earth pit will be 1.5m away from the outer edge of PCC chamber. (ii) Water pipe shall be provided in slanting position.
Supply, laying, jointing, testing and commissioning in replacement of cable XLPE insulated , armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, laid in trenches, fixed by means of MS saddles on or fixed on poles including connection with proper lugs for the following size including taking out old one complete all as specified and directed.
16 Sqmm 4 Core
25 Sqmm 3.5 Core
35 Sqmm 3.5 Core
50 Sqmm 3.5 Core
70 Sqmm 3.5 Core
95 Sqmm 3.5 Core
120 Sqmm 3.5 Core
150 Sqmm 3.5 Core
185 Sqmm 3.5 Core
240 Sqmm 3.5 Core
Excavation in trenches in soft/loose of soil not exceeding 1.5 mtr wide and not exceeding 1.5 metre in depth for taking out of unserviceable under ground cable complete all as specified and directed.
Returning, filling in, any type of soil and spreading in layers not exceeding 25 cm thick complete all as specified and directed.
Removal of surplus soil (any type of soil obtained from excavation) to a distance not exceeding 50 metre and depositing where directed complete all as specified and directed.
Supplying and laying bricks common burnt clay building bricks sub class 'B' including removing of old bricks complete all as specified and directed.
Material and labour for sand cushioing with a layer of fine sand 8cm thick before laying of cable and 15cm thick after laying of cable in trenches complete all as specified and directed. Notes-:(i) Excavation and earth work to be measured and paid for separately. (ii)Thickness of 18cms after punning shall be considered for payment.
Supply and fix TPN MCB DB 4 ways ,Double door with 415 Amps, Double door type complete all as specified and directed.
Supply and fix MCB TPN 63 Amp, 415 Volt , C- series, 50 Hz, breaking capacity-10 kA complete all as specified and directed.
Supply and fix for SP MCB 6-32 Amps C-series complete all as specified and directed.
M&L Earthing complete with galvanised steel earth plate electrode 60cm X 60 cm X 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level with the top edge of electrode not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4mm dia means of bolts, nuts,check nuts and washers of galvanised iron and GI lead protected with protection pipe of GI light grade 15mm dia upto 3mtr above ground level along poles fixed with two clamps of 25mm 3mm flat iron and connected to running earth wire at top of poles and watering pipe 20mm bore of GI medium grade all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing test point all as specified and direct and testing on completion including PCC 1:3:6) C-I cover and frame excavation and earth work etc complete all as specified in elect plate No 3 of SSR Part -I 2009. Note :- (i) PCC Chamber shall be constructed at least 1.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner. (ii) Outer edge of earth pit will be 1.5m away from the outer edge of PCC chamber. (iii) Water pipe shall be provided in slanting position.
Supply and fix of Aluminium Lugs suitable for 16 to 50 Sqmm 1100Volts including taking down old unserviceable lugs, complete all as specified and directed.
Supply and fix of aluminium Lugs suitable for 70 to 240 Sqmm 1100 Volts including taking down old unserviceable lugs complete all as specified and directed.
Supply and fixing in replacment GI pipe light grade 40 mm bore for cable protection fixed to poles/along wall/floor/under road/across the drain or nallah including taking up old GI pipe complete all as specified and directed.
Supply and fixing in replacment GI pipe light grade 50 mm bore for cable protection fixed to poles/along wall/floor/under road/across the drain or nallah including taking up old GI pipe complete all as specified and directed.
Supply and fixing in replacment GI pipe light grade 80 mm bore for cable protection fixed to poles/along wall/floor/under road/across the drain or nallah including taking up old GI pipe complete all as specified and directed.
S&F for jointing and testing LT straight through (heat shrinkable) joint suitable for LT cable 1100 volts grade 35 Sqmm to 95 Sqmm complete all as specified and directed.
S&F for jointing and testing LT straight through (heat shrinkable) joint suitable for LT cable 1100 volts grade 120 Sqmm to 240 Sqmm complete all as specified and directed.
Boring of holes under road, pavement, hard standing by trenchless technique and necessary T&P for passing of LT/HT cables complete all as specified and directed.
Kular and Company (BID ID -3469341)
SUN MANN ENGINEERS (BID ID -3474658)
RUHI ASSOCIATES (BID ID -3463630)
KULBHUSHAN AGGARWAL (BID ID -3474674)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.16 MB
BOQ_822657.xls
BOQ • 0.40 MB
Tende59202526.pdf
Tender Documents • 0.67 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .