Construction of Additional Accommodation for Govt Senior Secondary School Bagachanogi in Tehsil Thunag Distt Mandi SH C/o Laboratory class room library computer room and Art and craft room and staircase

Amount

Excavation in foundations trenches etc in earth work in all kinds of soil , such as pick work, pick jumper work, jumper work , jumper blasting wrok, chiseling wedging out rocks including pumping or bailing out water upto all lifts, stacking the excavated soil not more then three metres clear from the edge of excavation and then returning the stacked soil in 15 cm (fifteen centimetres) layers when required in to plinth side of foundations etcetra consolidating each deposited layer by ramming and watering and then disposing of all surplus exeavated earth including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Filling in plinth with sand under floors including watering, ramming, consolidation and dressing complete. including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing form work with steel plates 3:15mm (three point fifteen milimetres)thick welded with angle iron in frame, 30 x 30 x5 mm (Thirty into thirty into five milimetres) so as to give a fair finish including centring shuttering , strutting and propping etcetra with wooden battens and ballies ,heights of propping and centaring below supporting floor to ceiling in all height and removal of the same for insitu reinforced concrete and plain concrete including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge. work in:- Foundation,footing basis of colums etc.and mass concrete including carriage of material with in all leads and lifts and others incidentialsor as per the direction of the Engineer-in Charge.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etc. in any thickness. including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Columns pillar, posts and struts, square rectangular or polygonal in plan.including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Beams, cantilever, girders and lintels, sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceedings 1mtr in depth in all heights from floor.including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Edges of slabs and breaks in floor and walls in any width.including carriage of material and other including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Stair cases with slopping or stepped soffits excluding landing.including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and laying cement concrete, 1:6:12 (One cement : six Sand : twelve graded crushed stone aggregate , 40mm (Forty milimetres) nominal size ) and curing complete excluding cost of centring and shuttering in foundation and plinth including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and laying cemet concrete work in 1:2:4 ( one cement two sad ; four agraded stone aggreegate 20 mm nominal size) and cruing complete exculuding cost of form work and reinforcement for concrete work in foundation & plinth including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and laying reinforced design mix machanically mixed and vibrated cement concrete (M-25) , (Twenty five) grade and curing complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge. Foundation footing, basis of colums and the like and mass concrete. Up to all depth and hight

Suspended floor roofs,landing and shelves and their support balconies,beams ,girders,bressumers and cantilever up to all floor level

Columsm pillars, posts and struts up to all floor level

Stair cases (Except spiral stair cases) excluding landing but including preparing of the surface and finising of nosing up to all floor level

Providing and laying up to all floor level reinforced cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone agreegate 20 twenty mm nominal size) to give a smooth and even surface including centring and shuttering etc. But excluding cost of reinforcement in mouldings as in cornices windows, sills etc. not exceeding 15cm in girth. including curing complete and carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing Tor steel reinforcement for R.C.C.work including bending ,binding and placing in position complete upto all floor level (Tor steel) including carriage of material and other incidentials in all leads lifts and as per the direction of the Engineer-in Charge.

Applying cement slurry on R.C.C. slab or cement concrete work using 2.75 two point seventy five kg of cement per sqm. of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete.including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing throating or plaster drip and moulding to R.C.C. chajja.including carriage of material and other incidentials in all leads lifts and as per the direction of the Engineer-in Charge.

Brick work using common burnt clay building bricks with rat trap bound in super structure up to floor all level in cement mortar 1:6 (1 cement : 6 sand) 2nd class brick including curring complete and carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Brick work using common burnt clay building bricks in super-stucture above plinth level up floor level (second class Bricks) in cement Mortar 1:6 ( one: cement six: sand) including curing complete and carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Half brick masonry in common burnt clay building bricks in super structure up to floor all level in cement mortar 1:4 (1 cement : 4 sand) 2nd class brick including curing complete and carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Random rubble masonry/polygonal rubble masonary (uncorsed/brought to cources) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1cement : 6sand 12 graded stone agreegate 20mm nominal size) at plinth level in cement mortar 1:6 (1cement: 6sand).including curing and carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and lying pree cast cement cocrete hollow block masonary with cement concrete blocks of size 40cm x19cm x 20cm including quion block, jamb block and closer etc. Made of cement concrete 1:3:6 (1cement: 3sand: 6graded stone agreegate 20mm nominal size) laid with cement mortar 1:6 (1cement: 6sand) including curing complete in super structure including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing 40mm thick frame work.12 mm prelaminated board both side bwp phenal bounded exterior/interior grade panelled shutters with frames of 1st class deodar wood for doors including bright finished/back enamelled iron butt hinges with necessary screws ..including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing 300x16mm anodized aluminium sliding door bolts anodized colour and shade with bolts and nuts screws etc complete.including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing 200x10mm aluminium tower bolts (Berrel type) anodized transparent or dyed to required shade and colour with screws etc complete..including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing 100mm aluminium handles anodized transparent or dyed to required colour of shade with necessary screws etc. complete..including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing 100mm bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete..including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing partical borad ceiling of approved quality with but jointing and nails (frame work and cover fillets to be paid for separately) cement bounded partical board 8mm thick .including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Provding and fixing M.S grills of required pattern in wooden frames of windows etc with M.S flats, square or round bars with round headed bolts and nuts or by screws plain grill..including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing glass strips in joints terrazzo floors 40mm wide and 4mm thck..including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement 40mm thick including curing and carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Extra for making chequers of approved pattern on cement concrete of floors steps, landings and pavement etc..including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

15mm thick Cement plaster skriting (upto 30cm height) with cement mortar 1:3 (one cement : three sand) finished with a floating of neat cement including rounding of junction with floor .including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing 0.60 mm thick prepainted steel shees in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polister organic coting of 20 microns over 5 microns primer coating + back coat of polister of 5 microns over 5 microns primer coating including fixing with pree painted iron J or L hocks, boalts and nuts 6mm dia and prepainted GI limpet and bitumen washer complete with all accessories as required including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing ridges or hips 60cm overall with 0.60 mm thick prepainted steel shees in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polister organic coating of 20 microns over 5 microns primer coating + back coat of polister of 5 microns over 5 microns primer coating including fixing with pree painted iron J or L hocks bolts , boalts and nuts 6mm dia and prepainted GI limpet and bitumen washer complete with all accessories as required including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing valley 60cm overall with 0.60 mm thick prepainted steel shees in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polister organic coting of 20 microns over 5 microns primer coating + back coat of polister of 5 microns over 5 microns primer coating including fixing with pree painted iron J or L hoks bolts boalts and nuts 6mm dia and prepainted GI limpet and bitumen washer complete with all accessories as required including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Steel work welded in built up sections, trusses and framed work including cutting, hosisting fxing in position and applying a priming coat of red lead paint including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge. In beams joists channels, angles, Tees, flats with connectiing plates or angle plates as in main and cross beams, hip and jack rafter, purlins connected to comman rafter and the like. in all leads and lifts and as per the direction of the Engineer-in Charge.

In gratings framed guard bars ladders, railings, brackets and similar works.. including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing MS BP Sheet 1.66 mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to seal roof members and applying a coat of red lead primer complete as per the instruction of engineer-in-charge (Base members of steel works shall be measured and paid separately).including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing 1st class deodar wood work in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position complete as per specification and including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing 35mm (thirty five millimetre) thick 2nd class deodar wood panelled glazed or panelled and glazed shutters for doors windows and clerestory windows including black enamelled iron butt hinges with necessary screws including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing 40 mm (fourty millimetre )2nd class deodar wood wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm (zero point fifty six millimetre) for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screw etc complete as per specification including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing MS fan clamps type-I of 16mm (sixteen millimetre) dia MS barbent to shape with hook ends with RCC slab during laying including painting exposed portion or loop all as per standard design complete.including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing 85cm (eighty five cenitmetre) height railing with MS rectangular hollow pipe 75x50mm (seventy five into fifty millimetre) of 14 gauge M.S.black sheet make hand rail and M.S. square bars 20mm size ballusters at 30cm centre to centre duly welded with 2Nos. MS flat 40x6mm (fourty into six millimetre) size and 20mm (twenty millimetre) M.S. square bars lugs 10cm. long at lower end of ballusters embeded in RCC steps or waist slab including priming coat of steel primer and painting with steel enamal paint other than white as per design including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil, grees, dirt and other foreign metter and scoured with wire brushes, fine steel wool scrapers and sand paper complete with ready mixed priming paint brushing red lead, Red-oxide/zinc oxide chorme.including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Painting two coats (excluding priming coat) on new steel and other metal surfces surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foregin matters with ready mixed paint other than white.inculding curing of material with in all leads and lifts and others then incidentials as per the direction of the Engineer-in Charge.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting. Ready mixed paint brushing wood primer pink including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Painting two coats (excluding priming coat) on new wood and wood bassed surfaces with read mixed paint to give an even shade including cleaning the surface of all dirt, dust and other foregin matters sand papering and stoping with ready mixed paint other than white..including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

6mm thick cement plaster to ceiling with cement mortar 1:4 (1cement : 4sand).including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

15mm(fifteen millimetre) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor twol level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. in cement mortar 1:6 (one cement :six sand) including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

15mm (fifteen millimetre) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor twol level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. in cement mortar 1:6 (one cement : six sand). .including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after throughly brushing the surface free from mortar droopings and other foreign matter and also including preparing the surface even and sand papered smooth on walls priming coat with distemper primer.including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

White washing with lime on ceiling and/or sloping roof (two coats) to give an even shade inclduing throughly brooming the surface to remove all dirt, dust mortar dirt and other foreign matterincluding carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing plinth protection 50mm (fifty millimetre) thick with cement concrete 1:3:6 (one cement : three sand : six graded stone aggregate 20mm (twenty millimetre ) nominal size)including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Provding under layer for plinth protection of 75mm (seventy five millimetre) thick (unconsolidated) bed of dry brick/stone aggregate 40mm (fourty millimetre) nominal size) well rammed and consolidated and grouted with fine sand including preparetion of ground.in including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Constructing coursed rubble hammer dressed U-Shape open surface drain with side wall 15x22cm (fifteen into twenty two centimetre) with cement mortar 1:6 (one cement : six sand) and inside plastering with cement mortar 1:3 (one cement : three sand) including earth work and laying 10cm cement concrete 1:5:10 (one cement : five sand : ten graded stone aggregate 40mm nominal size) and 7.5cm cement concrete 1:2:4 (one cement :two sand :four graded stone aggregate of 20mm (twenty millimetre ) nominal size and finished with a floating coat of neat cement complate as per standard design. including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor 15mm (fiften millimetre) nominal bore including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and laying in trenches, galvanised mild steel tubes (medium grade), tube fittings (earth work in trenches to be measured and paid separately 15mm (fiften millimetre) nominal bore including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing PVC water storage tank of ISI: 12701 marked, G.I. intel and outlet connection, 15mm (fiften millimetre) nominal bore ball valve and mosquito proof PVC cover with locking arangfement including hoisting up to all heights above ground level 500 liters (five hundred liters) net capacity tank.including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing sand cast/cast iron spun spigot and socket soil, waste and ventilating pipes (Lead caulked joints to be measured and paid for separately 100mm (hundred millimetre) nominal size.including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing sand cast iron/cast iron spun fittings and accessories coller 100mm (hundred millimetre) nominal size.including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providng lead caulked joints to sand cast iron cast (sun) iron pipes and fittings including testing of joints 100mm (hundred millimetre) nominal size diameter including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing cast ironiron floor trap of self cleaning design with sand cast iron screwed down or hinged grating without vent arm complete including cost of cutting and making goods the walls and floors 100mm (hundred millimetre)nokinal diameter. including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing laboratory sink with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same but excluding fittings Viteous China 600mmx450mmx150mm. (six hundred into four hundred fifty into one hundred fifty millimetre)including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing C.P. Brass chain 50cm (fifty centimetre) long and rubber plug of following sizes for sink or wash basin 3200 (thirty two thousand ) dia . including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing C.P. Brass waste for wash basin or sink 32mm (thirty two millimetre) dia.including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing M.I. Union for wash basin or sink 32mm (thirty two millimetre) dia.including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing C.P. Brass pillar tap with Capstan head 15mm dia (fifteen millimetre)including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing C.P. Brass angle valve 15mm (fifteen millimetre) without Nuts and pipe including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing P.V.C. connection with brass unions 450mm ( four hundred fifty millimetre ) length .including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing brass full way valve with wheer 15mm (fifteen millimetre) nominal bore..including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

Providing and fixing P.V.C. waste pipe flexible (Coil type) length not less that 800mm (eight hundred ) for wash basin..including carriage of material and other incidentials in all leads and lifts and as per the direction of the Engineer-in Charge.

BUDH RAM