REPAIR REPLACEMENT IMPROVEMENT OF STREET LIGHTS FLAME PROOF LIGHTS SECURITY LIGHTS AND ALLIED WORKS IN TECH AREA AT AF STATION HALWARA

Amount

Excavation in trenches in soft or loose soil, not exceeding 1.5 metre deep and not exceeding 1.5 metre wide for taking out/laying of cables and getting out complete all as specified and directed. Notes : (i) Payment for excavation shall be made for one time in case the newcable is laid in the same trenches. (ii) Excavation upto top of brick protection shall be measured for payment purposes.

Returning, filling in trenches including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and as directed.

Removing excavated spoil to a distance not exc 50 mtr and depositing where directed not exc 1.5m above the starting point complete all as specfied and directed.

Material & labour for sand cushioning in trenches and well ramming in layers with 8 cm below and 15 cm above the cable with fine dry sand for cable protection or laid in floors under interlocking tiles complete all as specified and directed.

M&L for brick protection with sub class "B" bricks (old size) laid dry, flat in trenches over cable with longest dimension perpendicular to the axis of the cable complete all as specified and directed specified .

Dismantling/Taking down unserviceable HPSV/MH Lamp fittings 70 Watt to 400 Watts street/security light/Tower search lights/Tarmac Lights and Aviation obstruction lights on Over head tanks/Towers of any capacity & description from existing LT poles/walls/towers at any height and refixing the fittings in existing/another location after repair work or carrying to MES stores complete all as specified and directed by Engr-in-Charge. Note : 1. The cost of spares such as bulbs, copper bonded choke, ignitor etc shall be paid as supply. 2. Rate shall be included for flexible wire of size 23/.0076 for connceting the light to conductor and PVC tape to taping the joint properly shall be included in the rate quoted by the tenderer. 3. Vehicle mounted Hydraulic type ladders / Cranes shall be used and will be provided by contractor for dismantling / refixing of light fittings on pole and cost for the same is deemed to be included.

All as per Sl item No 6 above but LED Light fittings 32 Watt to 120 Watt

Supply only copper ballast/Electronic ballast suitable for HPSV/MH Lamp Ballast for 150W fittings complete all as specified and directed.

Supply only HPSV Lamp for 150 Watt fittings complete all as specified and directed

Supply only Ignitor for MH/HPSV/HPMV Lamp 70/125/150/250 Watt

Supply only of Lamp holder Screw type for HPSV/MV Lamp 70/ 125/150/ 250 Watt

Supply only LED driver suitable for existing make and model of LED fittings 32 watt to 120 watt complete with internal wiring and accessories complete all as specified and directed.

S&F 40mm dia bore GI tubing light grade as in cable protection pipe including all fittings fixed to pole/wall or laid under floor/road/pavement including taking out old pipe complete all as specified and directed

Taking up/down worn out/damaged/unserviceable PVC insulated underground cable armoured, heavy duty with aluminium conductors of any size, 1100V grade from trench/duct/pole/wall/pipes/rooftops etc. complete all as specified and directed. Note:- Excavation and earth work shall be measured and paid separetely.

Supply, laying, jointing, testing and commissioning of Low Tension (LT) cable XLPE insulated, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor laid in trenches/on poles/walls/in ducts/passing through pipes etc including jointing materials such as cable glands, lugs etc of size 35 sqmm 3.5 core complete all as specified and directed.

All as per Sl item No 15 above but 25 Sqmm 3.50 core

All as per Sl item No 15 above but Twin core 10Sqmm size cable flat or circular, PVC insulated aluminium conductor served with inner sheating of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4mm dia galvanised iron wire complete

S&F in replacement 2.5 sqmm (nominal area) copper conductor, twin core, FRLS, PVC insulated sheathed cable, drawn in steel pole for connection to street light fittings and making connections including taking down old cable complete all as specified and directed

S&F bracket made out of 40 mm dia galvanized steel tubing medium grade 1.5 m long including bending if required as directed ,02 Nos clamps made out of MS flat iron 40X6mm of suitable size fixed with bolts, nuts and washer including drilling holes and grouting with the same for fixing bolts as in repairs complete.(Rates quoted by the contractor shall deemed to include for nut and bolts).

S&F in replacement LED Street Light fitting 70 watt with highly optimised and efficient lighting distribution made from die cast aluminium housing, high power ceramic LEDs with integrated lens and IP 66 protection, Efficiency : 110LM/W including all other standard accessories as per manufactures instruction and including fixed on poles/walls with clamps, nuts, bolts & washers including connecting to fitting including taking down old light fitting any type complete all as specified and directed.

S&F in replacement LED Flood Light fitting 70 watt with highly optimised and efficient lighting distribution made from die cast aluminium housing, high power ceramic LEDs with integrated lens and IP 66 protection, Efficiency : 110LM/W including all other standard accessories as per manufactures instruction and including fixed on poles/walls with clamps, nuts, bolts & washers including connecting to fitting including taking down old light fitting any type complete all as specified and directed.

S&F in replacement LED Street Light fitting 120 watt , pressure die cast housing with toughned glass cover,suitable gasket and IP 66 protection, , 10 KV SPD, efficiency 110LM/W, including all other standard accessories as per manufactures instruction and including fixed on poles/walls with clamps, nuts, bolts & washers including connecting to fitting including taking down old light fitting any type complete all as specified and directed.

S&F in replacement LED Flood Light fitting 120 watt (Compatible for building/tower lighting) with LED lamps, pressure die cast housing with toughned glass cover,suitable gasket and IP 66 protection, Efficiency : 110LM/W, including all other standard accessories as per manufactures instruction and including fixed on poles/walls with clamps, nuts, bolts & washers including connecting to fitting including taking down old light fitting any type complete all as specified and directed.

S&F in replacement Flame proof flood light fitting 120 watt with LED lamps, pressure die cast housing with toughned glass cover,suitable gasket and IP 66 protection including all other standard accessories as per manufactures instruction and including fixed on hanger/blast pen with clamps, nuts, bolts & washers including connecting to fitting including taking down old light fitting any type complete all as specified and directed. Note For Sl item No 20 to 24 1. Vehicle mounted Hydraulic type ladders / Cranes compatible for hanger light, street light, building light & watch tower light upto 15.00 mtr height shall be used and will be provided by contractor for dismantling / refixing of light fittings on pole and cost for the same is deemed to be included in the quoted rates.

S&F Alluminium Thimbles of sizes 6 sqmm to 35 Sqmm conductor complete all as specified and directed.

S&F LT tape rolls (minimum 100 mtr length of tape in each role) complete all as specified and directed.

S&F in repairs, unserviceable LED aviation light fittings 5 Watt with glass cover, suitable gasket and IP 55 protection including all other standard accessories as per manufactures instruction and including fixed on top of tall structures of tower and building with clamps, nuts,bolts & washers including connecting to fitting including taking down old light fitting any type complete all as specified and directed. Make Bajaj Model No BGAV 302 LED of equivalent make in Crompton Greaves/Havells.

S&F LED tube rod 20 Watt 4' long complete all as specified and directed by Engr-in-Charge.

Dismantling hight mast light fitting of any capacity fixed pole at any height for repairs to raising and lowering system of High Mast light and repairs to double drum winch, proper checking of lubrication system, checking and tightening of trailing cable, repairs to remote for up and down of lantern carriage, fixing of flood light luminaires with suitable bracket and making serviceable including base protection of high mast light complete all as specified and directed. Notes : 1. Replacement of defective parts/accessories wil be measured and paid seperately as supply only under respective items of this BOQ. 2. Transport and T&P ie Hydro Crane, Ladder, spanners or any other equipment for repair of High Mast Lights shall be provided by the contractor and cost of same is deemed to be included in the quoted rates.

Supply only LED Flood Light fitting 120 watt (Compatible for High Mast lighting) with LED lamps, pressure die cast housing with toughned glass cover,suitable gasket and IP 66 protection, 10 KV SPD, Efficiency : 110LM/W, including all other standard accessories as per manufactures instruction and including fixed on poles/walls with clamps, nuts, bolts & washers including connecting to fitting including taking down old light fitting any type complete all as specified and directed.

S&F in replacement street light junction box insulated and made out of environment friendly, recyclable, UV resistant, halogen & silicon free, polycarbonate with glass fibre reinforced of size not less than 205x255x112mm. The box shall be rated for degree of ingress protection IP 66/67 including fixing material and taking down old junction box of any type and size complete all as specified and directed. Make Cat Part No KF 2525 of Hensel suitable for upto 25 sqmm cable size or equivalent in Siemens/GE Power/Rittal

S&F Non metallic 20 mm dia PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mounth tube ends and fixing accessories such couplers, lock nuts, saddles, pipe hooks etc as in replacement complete all as specified.

Earthing with galvanised steel earth plate electrode of size 60cmX60cmX6cm thick buried directly in ground (earth pit not less than 2.25m deep bellow the ground level) with top edge of the plate no less than 1.5m bellow normal ground level, connected to the galvanised earth lead by means of bolts, nuts and washers of galvanised iron or steel using GI or steel wire 4 mm dia as earthing lead as shown in electrical plate No 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on complete including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1 using 20mm grade stone aggregate pit , funnel, 20mm dia GI medium grade watering pipe , 15mm dia GI light grade earth lead protection pipe and pre-cast earth pit cover made of RCC (1:1.5:3) type A1 duly reinforced with 8mm dia TMT bar @ 150 c/c both ways, one lifting handle made of 10mm dia TMT bar embedded in cover slab and cover, wire, copper lugs etc mesh charcoal and common salt in alternate layer of 15cm thick as in replacement complete all as specified and as directed.

M&L for boring under road/path/hard standing to pass the HT / LT UG cables upto 80mm dia pipe including insertion of 75mm bore PVC (SWR) pipe with the own arrangement of T&P complete all as specified and directed. Note : The cost of 75mm bore PVC (SWR) pipe is deemed to be included in the quoted rates.

M&L for cleaning, scrapping , preparing the old painted steel surface of any description and applying one coat of aluminium paint to poles 9 metre long and accessories/fittings what ever fixed on pole and writing pole Nos with white paint on black back ground complete all as specified.

M&L for cleaning, scrapping , preparing the old painted steel surface of any description and applying two coats of synthetic enamel paint over one coat of red oxide primer to HT/ LT panel complete all as specified.

Taking down existing cable from electric pole junction box and providing 2 mtr length of 40mm dia double wall corrugated pipe (2 piece of 1.00 mtr each) of 6 Kg/Sqcm for insertion of existing cable through the pipe and refixing/reconnecting the cable with junction box with all fittings/fixtures /clamps etc complete all as specified and directed.

Supply and pasting 50mm wide reflective tape (3M tape) red in colour on pole (2 round on perimeter of pole) above 30 CM from base and marking pole number between 02 rounds using reflective tape (3M tape) complete all as specified and directed by Engr-in-Charge.

BEHL AND COMPANY

KHAIRA ENTERPRISES

M/S SANGA SINGH AND CO

JINDAL AND COMPANY

S M BUILDERS