Loading
Loading…
Loading…
Tender Value
₹1.0 Cr
EMD Value
₹2.0 L
Closing Date
30 Dec 2025, 11:00 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
45 days
Expenditure
Capital (Works)
GSPGT
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' which ever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Appendix-J, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet
Statement showing Annual Contractual Turnover Data (as per Annexure - J of Tender Document) for the Previous 3/4 Years (Contractual Payment only) supported by Audited Balance Sheet duly certified by the Chartered Accountant shall be enclosed alongwith the bid. Non-submission of the same by the bidder shall result in summarily rejection of his/their bid
The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: 1. Three similar works each costing not less than the amount equal to 30% of advertised value, or 2. Two similar works each costing not less than the amount equal to 40% of advertised value or 3.One similar work each costing not less than the amount equal to 60% of advertised value Note: Separate completed works of minimum required values for each component can also be considered for fulfillment of technical eligibility criteria for different components. *Similar Single work is defined as "Works involving supply, installation, testing and commissioning of outdoor/indoor substation equipments of 11kV or above voltage".
The tenderer shall submit along with the tender document, documents in support of his/their claim to fulfill the eligibility criteria as mentioned in the tender document. Each page of the copy of documents/certificates in support of credentials, submitted by the tenderer, shall be self- attested/digitally signed by the tenderer or authorized representative of the tendering firm. Self-attestation shall include signature, stamp and date (on each page). Only those documents which are declared explicitly by the tenderer as "documents supporting the claim of qualifying the laid down eligibility criteria" will be considered for evaluating his/their tender. Note- The tenderer shall attach a summary of documents submitted for satisfying the eligibility criteria either duly self attested or digitally signed
22 conditions · 3 needing a document upload
The Supply of Goods and Services would be subject to GST Act and Rules applicable from time to time.
I/We have read the various conditions to tender in the attached tender document and agree to abide by the said conditions.
I/We agree to keep this tender open for acceptance for a period of 45 days from the date of closing of this tender and in default thereof I/We will be liable for forfeiture of my/our Bid Security. I/We offer to do the work for Railway, at the rates quoted in the attached Schedule and hereby bind myself/ourselves to complete the works in all respects.
I/We also hereby agree to abide by the updated Regulations of Tenders and Contracts and General Conditions of Contract issued by the Engineering Department of Indian Railways along with correction slips issued from time to time and to carryout the work according to the Special Conditions of Contract and specifications of materials and works as laid down by Railway in the Annexed Special Conditions / Specifications, Schedule of Work for the present contract.
All rates quoted in the tenders shall be deemed to be inclusive of CGST, SGST, IGST etc., payable by the contractor to the Government or any public body and no additional amount/rate or claim will be entertained on this account by the Railways. Also no claim whatsoever will be accepted by Railways on account of revision of tax rates, new taxes of statutory nature by State/Central Govt.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer shall go through the entire tender documents thoroughly and strictly adhere the instructions and directions given at different pages.
Deployment of Qualified Engineers at Work Sites by the Contractor - The Contractor shall employ 1 No. of qualified Graduate Engineer for works Rs. 200 Lakh or more and 1 No. of Diploma Engineer for works costing more than Rs. 25 Lakh, but less than Rs 200 Lakh
MAJN - Augmentation of Existing 11kV sub-station.
J-E-27-2025-26-W~SR
J-E-27-2025-26-W
Open
Works - General
9 Months
Palakkad, Kerala
₹0
₹2.0 L
30 Dec 2025
2 Dec 2025
16 Dec 2025
197 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,04,66,691 | ||
| — | 1200.00 | — | — | ||
| "Transportation &Laying / clamping / threading of 4 Core XLPE cable (Size up to & Including 70 Sq.mm) through trench, Cable protection pipe, Wall/shelters, FOB, etc as directed at site, with suitable clamps, Aluminium sockets, etc., Note: - Cable will be supplied by Railway from the Office of SSE/Electrical In-Charge of the work." | — | — | — | 78,000 | |
| — | 1500.00 | — | — | ||
| "Transportation &Laying / clamping / threading of 4 Core XLPE cable (Size above70 Sq.mm upto and including 120Sq.mm) through trench, Cable protection pipe, Wall/shelters, FOB, etc as directed at site, with suitable clamps and termination duly supplying required Aluminium sockets, etc., Note: - Cable will be supplied by Railway from the Office of SSE/Electrical In-Charge of the work." | — | — | — | 1,06,500 | |
| — | 200.00 | — | — | ||
| "Transportation &Laying / clamping / threading of 2Core/4 Core XLPE cable (Size above120 Sq.mm upto and including 300Sq.mm) through trench, Cable protection pipe, Wall/shelters, FOB, etc as directed at site, with suitable clamps and termination duly supplying required cable glands, Aluminium sockets, etc., Note: - Cable will be supplied by Railway from the Office of SSE/Electrical In-Charge of the work.." | — | — | — | 18,000 | |
| — | 150.00 | — | — | ||
| Supply,Transportation &Laying/ clamping /threading of HT XLPE cable 3x300 Sq mm Aluminium including stacking place to work site and laying it carefully using cable rollers, taking through stone ware/ G.I.pipes at road crossing/ culverts /bridges etc. whereever necessary, providing identification tags at 5m intervals, filling the space around the cable with riddled soil, providing cable route markers at 100m intervals, inclusive of cost of all materials (other than cost of GI/HDPE pipe & UG Cable), labour and transport including crane charges excluding excavation and backfilling. | — | — | — | 2,67,600 | |
| — | 24.00 | — | — | ||
| "End termination using single brass compression gland of Size from 4 core 70 Sq.mm up to & Including 4 Core 95 Sq.mm with required aluminium sockets, etc.., Note:- 1) Scope of work including supply and Fixing of said glands 2) PVC type glands may be used for cable termination in the poly carbonate box as directed by site engineer incharge." | — | — | — | 11,136 | |
| — | 32.00 | — | — | ||
| "End termination using single brass compression gland of Size from 4 core 120 Sq.mm up to & Including 4 Core 185 Sq.mm with required aluminium sockets, etc.., Note:- 1) Scope of work including supply ad Fixing of said glands 2) PVC type glands may be used for cable termination in the poly carbonate box as directed by site engineer incharge." | — | — | — | 19,776 | |
| — | 10.00 | — | — | ||
| "End termination using single brass compression gland of Size from 4 core 240 Sq.mm up to & Including 4 Core 300 Sq.mm with required aluminium sockets, etc.., Note:- 1) Scope of work including supply ad Fixing of said glands 2) PVC type glands may be used for cable termination in the poly carbonate box as directed by site engineer incharge." | — | — | — | 9,280 | |
| — | 12.00 | — | — | ||
| "Supply and Fixing of Cable protection pipe of 50mm dia B class GI pipe with suitable clamps and sealing compound shall be provided on the top of the GI pipe as per standard. Preferable Makes: - Jindal, Tata, Surya or any other reputed makes, " | — | — | — | 8,628 | |
| — | 25.00 | — | — | ||
| Supply and Fixing of Cable protection pipe of 100mm inner dia B class GI pipe with suitable clamps and sealing compound shall be provided on the top of the GI pipe as per standard | — | — | — | 23,200 | |
| — | 6.00 | — | — | ||
| Supply and fixing of 'B' class 150mm Dia GI pipes for cable leading / protection including one number of clamp made out of MS flat of 40mmx6mm size, one per metre length including applying of end sealing compound on top etc | — | — | — | 12,294 | |
| — | 30.00 | — | — | ||
| Supply and burying of HDPE pipe 160mm dia pressure rating up to 4PN (Material Grade-PE 80) Under Railway track/Road Crossing/ in the excavated cable trench with suitable fixing hardware. | — | — | — | 27,000 | |
| — | 90.00 | — | — | ||
| Excavation of cable trench in all kinds of soil up to a depth of 1.0 Mtr. & Width of 0.3 Mtr duly clearing the roots of trees etc. and refilling with the excavated soil up to normal level. Depth and Width can be varied based on site Condition as directed by site engineers in charge. Concerned Measurement will be taken in Cubic meters. | — | — | — | 55,800 | |
| — | 8.00 | — | — | ||
| Breaking of cement concrete flooring and finishing to original level by cement concrete in an approved manner | — | — | — | 46,936 | |
| — | 4.00 | — | — | ||
| Excavation and refilling of cable trench along/across Tarred Road up to a depth of 1.0 meter and width of 0.3mtrs duly breaking the tarred surface, removing soling stones and soil and finishing back to the original level with bituminous macadam using crushed stone aggregates as per standards. Depth and width can be relaxed by site Engineer and Measurement will be recorded based on the Proportionate reduction in length of trench/meter. | — | — | — | 22,596 | |
| — | 9.00 | — | — | ||
| Excavation and refilling of cable trench across the Railway track 30cm width and depth of 1.2m from the foundation level. This includes removal and relaying of ballast without contamination of soil and rearranging the formation to original level. Depth can be relaxed by the site engineer as per the site condition and measurement will be recorded based on the volume of the trench under the formation. | — | — | — | 4,500 | |
| — | 6.00 | — | — | ||
| Excavation of Cable trench in Granite/Paved block/Kota stone area duly removing Granite/Paved block/Kota stone and Excavation of cable trench in all kinds of soil upto a depth of 1.0 meter. & Width of 0.3 meter duly clearing the roots of trees etc. and refilling with the excavated soil up to normal level. Depth and Width can be varied based on site Condition as directed by site engineers in charge. This includes Restoring the floor by using removed Granite/Paved block/Kota stone. | — | — | — | 4,824 | |
| — | 10.00 | — | — | ||
| "Supply at site & placing of flat type cable route indicator at regular intervals on straight route and one each at every route diversion from straight line as directed by site engineer. The said cable Route Indicator has to be grouted in a concrete mix of ratio 1:3:6with 300mmX200mmX300mm size." | — | — | — | 7,900 | |
| — | 4.00 | — | — | ||
| Supply and fixing of heat shrinkable straight through cable joint kits suitable for 4 Core / 3.5 Core PVC/XLPE LTUG cables of size 50sq.mm to 95sq.mm | — | — | — | 14,220 | |
| — | 4.00 | — | — | ||
| Supply and fixing of heat shrinkable straight through cable joint kits suitable for 4 core/3.5Core PVC/XLPE LTUG cables of size 120sq.mm to 185sq.mm | — | — | — | 20,316 | |
| — | 1.00 | — | — | ||
| "Supply, Erection, Testing and Commissioning of 9m Double Pole (Rail pole) structure inclusive of 11kV, 200A/400A D/B GOS, Post Insulator, Pin Insulator, Disc Insulator, 1set of Lightning Arrester, 0SWG Electrolytic Solid Copper Rods, Anticlimbing Devise, Channel cross arms and angle cross bracings etc,,. confirming to KSEBL Standards inclusive of all accessories such as clamps, bolts, nuts, washers etc.., as per Detailed Sketch Enclosed and painting with two coats in each of primer zinc chromate and aluminium paints. (Rail pole will be supply by railway at nearest depot) Note:- Necessary drawing approval may be obtained before commencement of work. " | — | — | — | 50,788 | |
| — | 2.00 | — | — | ||
| Transportation of 9 meter Rail pole from the nominated locations as directed by site engineer incharge. | — | — | — | 6,094 | |
| — | 1.00 | — | — | ||
| Supply, Erection, Testing and Commissioning of Outdoor Type 11kV, 3 Phase Metering Panel with Trivector Meter (Bi directional), CT of Suitable Ratio, PT of Ratio 11kV/110V and all other Standard accessories as per enclosed detailed specification, relevant standards and requirements of MESCOM | — | — | — | 2,23,465 | |
| — | 10.00 | — | — | ||
| Supply and provision of mass concrete for plinths of transformers, panel boards, kiosks and as instructed by Engineer-incharge with 1:2:4 ratio using 20 mm blue metal | — | — | — | 71,100 | |
| — | 2.00 | — | — | ||
| Supply, fixing and commissioning of outdoor heat shrinkable type end termination kit for 11kV, 3 core, 300sq.mm XLPE UG cable | — | — | — | 27,426 | |
| — | 7.00 | — | — | ||
| Supply, fixing and commissioning of indoor heat shrinkable type end termination kit for 11kV, 3 core, 300sq.mm XLPE UG cable | — | — | — | 74,655 | |
| — | 3.00 | — | — | ||
| Supply, Erection, testing and commissioning of Drop Out Fuse unit complete to work on AC, 11 KV, three phase, 50 Hz supply, 200 A capacity, channel mounting and expulsion type with fuse elements of appropriate current rating inclusive of all accessories, all conforming to IS No: 2692, 5792 & IS No: 9385 with all accessories | — | — | — | 31,059 | |
| — | 225.00 | — | — | ||
| Supply and Spreading of quarry dust of approximate 100mm thick in the substation yard to avoid growth of grass/Bushes. | — | — | — | 57,825 | |
| — | 16.00 | — | — | ||
| Supply and spreading of Blue metal of 40mm size around the Double Pole Structure and transformer plinth structure as per standard | — | — | — | 39,744 | |
| — | 2.00 | — | — | ||
| Supply (at site), erection, testing and commissioning of 400 KVA, 11kV/433V outdoor type Distribution Transformer with cable box on both HT & LT side as per enclosed detailed specification and relevant standards | — | — | — | 31,67,120 | |
| — | 1.00 | — | — | ||
| Supply, erection, testing and commissioning of floor mounted 11kV, 630A HT panel with VCB as incomer and two nos. of VCB as outgoing as per enclosed detailed specification and relevant standards | — | — | — | 20,53,365 | |
| — | 100.00 | — | — | ||
| Supply, fabrication and fixing of frame work made of 50x50x6mm MS angle for laying chequered MS plate to cover cable duct to suit site requirements and as instructed by Engineer-in- charge | — | — | — | 50,800 | |
| — | 24.00 | — | — | ||
| Supply and laying of chequered MS plate of 6mm thickness in sizes and shapes required for covering cable duct as instructed by the Engineer-in-charge. Floor and MS plate should be in the same level | — | — | — | 60,936 | |
| — | 38.00 | — | — | ||
| Supply and laying of electrolytic tinned copper flat of 40mmx6mm (1 1/2"x1/4") size as per standard | — | — | — | 88,768 | |
| — | 1.00 | — | — | ||
| Supply, erection, testing and commissioning of contactor switched standard Automatic Power factor Correction Panel of 75kVAr capacity as per enclosed detailed specification and relevant standards | — | — | — | 2,88,516 | |
| — | 1.00 | — | — | ||
| Supply and fixing of 2Nos. of 400/5A, CL 1.0,10VA, Resin cast CTs and 1No.5+5/5A summation CT in the existing Non essential MV panel (for APFC panel) | — | — | — | 8,126 | |
| — | 180.00 | — | — | ||
| Supply and fixing of 2Core 2.5 Sqmm Copper Armoured UG cable for Interconnection between APFC Panel and CT . | — | — | — | 21,960 | |
| — | 12.00 | — | — | ||
| "Supply of Concealed type Earthing. This consisting of supply at site, erection, testing and commissioning of G.I. Earth Electrode 50mm dia, 3000mm long, 'C' class (heavy duty/ISI marked supply and and fixing of earth inspection chamber, lid, as per Construction Drg. No.EL/P/TYPE-1022 with charcol & salt / Bentonite Compound Filling, which includes the cutting and removing of granite / marble / kadappa stone paved platform and cement concreted areas etc., excavation / augering of earth pit by suitable boring equipments. The earth pot shall be provided in level with flooring. The above includes reconstruction of the area of granite / marble / kadappa stone / cement concrete etc.., to bring back to the original condition duly providing granite / marble / kadappa stone / cement concrete etc.., duly making interconnection between electrical equipment and earth electrode using 6SWG GI earth wire. The earth pot shall be painted black and earth value to be recorded" | — | — | — | 85,920 | |
| — | 60.00 | — | — | ||
| "Supply and fabrication of fencing panel of 2.4mtr Height and 1m Width made with 8SWG (Nominal Size ) GI Chain Link Mesh 50X50mm inner size of the diamond design, 40X40X5/6mm MS angle Outer frame in 2mtr wide and Vertical T section support with 40X40X5/6mm MS angle iron and 40X5/6mm MS flat at middle , Horizontal brazing at Centre with 40X5/6mm MS flat etc.., In welded Construction, Install the Fencing panels on the channel poles already erected by welding, Suitable door and locking Arrangements , painted with approved enamel Shade/AL paint after Applying epoxy Primer etc., as Required. Note:- Fencing to be done as per the drawing enclosed." | — | — | — | 2,74,260 | |
| — | 40.00 | — | — | ||
| fabrication, Supply and Erection of approximate 2.9m long channel pole of size 100X50mm with MS base plate of size 200X200X5mm, painted with approved enemal Shade/AL pain after epoxy primer for welded mesh fencing of the substation including concreting. | — | — | — | 1,82,840 | |
| — | 1.00 | — | — | ||
| "Fabrication, supply and erection of stand of fire buckets as per Standards along with Six Numbers of fire buckets each of 10litre capacity, filled with Coares, River sand and painted in red with white letters. Note :- Drawing approval may be obtained before fabrication work." | — | — | — | 6,602 | |
| — | 2.00 | — | — | ||
| Providing and fixing of 6kG DCP type fire extinguisher Confirming to IS 28781976 complete with discharge swivel bend , horn & hose, screwed valve, mounting bracket and cylinder fully charged. | — | — | — | 4,470 | |
| — | 1.00 | — | — | ||
| Supply of earth discharge rod with suitable length of flexible copper wire for earthing | — | — | — | 2,844 | |
| — | 1.00 | — | — | ||
| Supply of fuse link rod of suitable length for fixing and removing of DO fuses | — | — | — | 2,844 | |
| — | 1.00 | — | — | ||
| Supply of First Aid Box [FAB] containing medicine as presdribed by St.john ambulance Brigade of indian re cross society Confirming to IS:-2217-1963 | — | — | — | 762 | |
| — | 1.00 | — | — | ||
| Artificial Resuscitator in a portable case ready for use with adult face piece | — | — | — | 2,336 | |
| — | 1.00 | — | — | ||
| Shock treatment chart duly framed and written in English, Hindi & Regional language. | — | — | — | 1,016 | |
| — | 2.00 | — | — | ||
| Supply of 15kV grade rubber hand gloves pair of 15" size as per IS :4770-1991. | — | — | — | 1,016 | |
| — | 8.00 | — | — | ||
| Supply and fixing of Danger Board suitable for 11 KV /22 KV/33 KV systems, as per IS.No: 2551, along with one number of clamp made out of 25mm X 4 mm size including bolts & nuts for fixing on structures and painting | — | — | — | 2,440 | |
| — | 14.00 | — | — | ||
| Supply, erection and testing of earthing arrangements duly stenciling of earth resistance value along with date as per drawing number CEE/CN/MS/37-2004 with Cast Iron pipe of 100 mm diameter, LA class, including supply and spreading of 10 kgs in each of salt and charcoal for earth treatment | — | — | — | 2,59,658 | |
| — | 4.00 | — | — | ||
| Supply and Installation of earthing arrangements as per RDSO Specification No. RDSO/SPN/197/2008 or latest | — | — | — | 1,11,732 | |
| — | 2.00 | — | — | ||
| "HT Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. Note :- 1) The work has to be done as per the drawing enclosed. 2) Drawing Approval may be obtained before Commencement of work. " | — | — | — | 22,794 | |
| — | 40.00 | — | — | ||
| Supply, fixing and laying of 6SWG copper structures/ground as instructed by the Engineer-in-charge | — | — | — | 5,280 | |
| — | — | — | earthing | ||
| — | — | — | purpose | ||
| — | 130.00 | — | — | ||
| Supply, fabrication and laying of 50mmx6mm GI flat for earthing purpose as per relevant standard and as instructed by the Engineer-in-charge | — | — | — | 59,410 | |
| — | 6.00 | — | — | ||
| Supply and spreading of chequered electrical rubber mat of 2 m long and 1.0 m wide and 12 mm thick to withstand 40 kV(rms) as per IS No: 5424 | — | — | — | 12,192 | |
| — | 5.00 | — | — | ||
| Supply and fixing of Protected area Board of Size 750X300X1.6mm as per Drawing No.EERE/TSS/16-Enamel type | — | — | — | 3,500 | |
| — | 1.00 | — | — | ||
| Provision of printing the substation Electrical Drawing in the viniyal (Approx. Size 6 X 4 feet) and same has to be fixed in the suitable location as directed at site Engineer. | — | — | — | 3,047 | |
| — | 12.00 | — | — | ||
| Fabrication, supply and fixing of MS Channels of size 75 x 40 x 3.7 mm (web) including fixing clamps, bolts and nuts and painting with two coats of primer zinc chromate paint and aluminium paints | — | — | — | 14,112 | |
| — | 16.00 | — | — | ||
| Fabrication, supply and fixing of MS Channels of size 100 x 50 x 4.0 mm (web) including fixing clamps, bolts and nuts and painting with two coats of primer zinc chromate paint and aluminium paints. | — | — | — | 21,872 | |
| — | 1.00 | — | — | ||
| "Design, fabrication, supply, erection, testing and commissioning of medium voltage main distribution board (Essential) with the following Incoming : 1) 1 No. of 4 pole 315A on load change over switch similar to L&T Model No. CO33150OOOO. 2) 2Nos. of MCCB 4 Pole 400A, 36kA similar to L&T Model No. CM98403OOROOG with Thermal Magnetic Release, adjustable over load, adjustable Short-circuit. Mechanical interlocking has to be provided between the said MCCB Outgoing 1) 3Nos. of MCCB 4 Pole 160A, 25kA similar to L&T Model No. CM90642OOMO with Thermal Magnetic Release, adjustable over load, adjustable Short-circuit 2) 3Nos. of MCCB 4 Pole 100A, 25kA similar to L&T Model No. CM91712OOKOOG with Thermal Magnetic Release, adjustable over load, adjustable Short-circuit. 3) 4Nos. of MCCB 4 Pole 63A, 25kA similar to L&T Model No. CM91712OOHOOG with Thermal Magnetic Release, adjustable over load, adjustable Short-circuit 4) 3 phase KWH meters (L&T model WL400010OOOO or similar) -2 Nos., 5) 3 phase Digital Voltmeters (L&T model WL132010OOOO or similar) - 2 Nos., 6) 3 phase Digital Ammeters (L&T model WL131010OOOO or similar)- 2Nos., 7) Suitable length of electrolytic copper busbar of 40 x10mm (main) and other standard fittings conforming to enclosed detailed specifications and relevant IS, Note:- 8) Approximate size of the panel - 2600mm x 2000mm x 500mm (L x H x D)" | — | — | — | 7,51,138 | |
| — | 2.00 | — | — | ||
| "Design, fabrication, supply, erection, testing and commissioning of medium voltage main distribution board with the following Incoming : 1) 1Nos. of MCCB 4 Pole 250A, 36kA similar to L&T Model No. CM92109OOP1OG with Thermal Magnetic Release, adjustable over load, adjustable Short-circuit. Outgoing 1) 3Nos. of MCCB 4 Pole 100A, 25kA similar to L&T Model No. CM91712OOKOOG with Thermal Magnetic Release, adjustable over load, adjustable Short-circuit 2) 3Nos. of MCCB 4 Pole 63A, 25kA similar to L&T Model No. CM91712OOHOOG with Thermal Magnetic Release, adjustable over load, adjustable Short-circuit. 3) Multifunction meter similar to L&T model WL440521OOOO - 1 Nos., 4) Suitable length of electrolytic copper busbar of 40 x10mm (main) 5) Indication lamp for 3 phase - 1 set 6) Approximate size of the panel - 1600mm x 1500mm x 500mm (L x H x D) and other standard fittings conforming to enclosed detailed specifications and relevant IS," | — | — | — | 5,57,010 | |
| — | 300.00 | — | — | ||
| Supply, laying and provision of 6 SWG GI wire as earth continuity including termination | — | — | — | 10,200 | |
| — | 26.00 | — | — | ||
| Supply and laying of country bricks of size 200mm X 100mm X 50mm (width wise) in an approved manner | — | — | — | 3,536 | |
| — | 35.00 | — | — | ||
| Providing Brick work (In width 250mm or Less) in cement Mortar for masonary open cable trenches, fencing Kerb wall. | — | — | — | 2,81,960 | |
| — | 180.00 | — | — | ||
| Providing 12mm thick Cement plastering for masonry open trenches, fencing kerb wall, brick foundation etc.., | — | — | — | 27,180 | |
| — | 5.00 | — | — | ||
| supply and provision of 100mm thick Concrete for base flooring of masonry open trench and instructed by Engineer in charge with 1:3:6 ratio using 20mm blue metal | — | — | — | 32,620 | |
| — | 30.00 | — | — | ||
| Providing and laying of 50mm thick RCC slab in suitable size with 10mm MS rod Re- inforcement 100mm C/C metal etc.., for covering the open cable duct out side. | — | — | — | 21,150 | |
| — | 300.00 | — | — | ||
| Fabrication, supply and fixing of clamps of various sizes made out of MS flat of 25x3mm size including painting suitable for clamping/fixing of GI pipe/LTUG cable on walls of buildings/sheds, shelter etc. using bolts and nuts of suitable sizes | — | — | — | 21,300 | |
| — | 200.00 | — | — | ||
| "Supply and erection of 300 x 50mm size 14 SWG GI perforated tray for cable laying with Suitable fixing Arrangements As directed by Site Engineer. Preferable Makes :- JSW, ESSAR, TATA or any other reputed madek Note:- 1) The scope of work includes supply and fixing of suitable length & size of thread rods and strut channels etc..," | — | — | — | 2,10,400 | |
| — | 40.00 | — | — | ||
| "Supply and Three phase wiring by means of 4 nos. of 10.0 Sq.mm (P&N) and 1No. of 16.0Sq.mm (Earth) size Flame Retardant Low Smoke & Halogen (FR- LSH) PVC insulated single core multistranded flexible copper cable with ISI mark of approved make with coded color for Three Phases, Neutral and Earth Respectively through already erected PVC casing and capping or pipes, junction boxes, distribution boards etc., Preferable Makes of FR-LSH Cables :- Poly Cab, Havells, V- Guard, Bonton or any other reputed makes, " | — | — | — | 57,160 | |
| — | 40.00 | — | — | ||
| Supply and wiring to pre-Cooling Plug socket by means of 4 Runs of Flame Retardant (FR) PVC insulated single core multistranded flexible copper cable of size 25 sq.mm drawn through 50mm dia PVC pipe including clamping of PVC pipe along the rail post/PF Shelter/Pillar with suitable MS painted fixing hardware (1m = 4 Runs of 25 Sq.mm copper wire) | — | — | — | 86,760 | |
| — | 1.00 | — | — | ||
| "Supply at site and fixing of Transparent/Opaque type Poly carbonate box similar to model No.Mi 0100/Mi 0101 fitted with the followings 1) 63A 4 Way connector - 1Nos. " | — | — | — | 5,444 | |
| — | 1.00 | — | — | ||
| "Supply at site, erection, testing and commissioning of wall mounting metallic, 1- phase, double door, MCB Distribution Board 12way Similar to L&T Model No. DBSPN012DDS, powder coated with the supply and fixing of the following, In Coming DP MCB - 40Amps - 1Nos. DP ELCB- 100mA, 40Amps - 1Nos. Out Going SP MCB of 6A to 32A - 8 Nos. of as outgoing including internal wiring connection, with earthing / neutral link, din channel complete with all accessories. Copper lugs shall be used for termination of wire in MCB'S and Aluminium sockets for cables termination and plastering and finishing to original level as directed by Engineer In charge. Note :- 1) Makes of MCB / ELCB is L&T / Legrand / ABB / Siemens." | — | — | — | 12,005 | |
| — | 7.00 | — | — | ||
| "Supply and Fixing of 18W to 20W LED batten tube light Luminary.The fittings have to be fixed on the wall/ceiling/PF Shelter with suitable clamps. Preferable Makes :- Surya, philips, CG, Bajaj, GE, Wipro, HPL or any other reputed makes." | — | — | — | 3,129 | |
| — | 3.00 | — | — | ||
| "Supply and fixing of BEE 5 star rated Remote Controlled BLDC Ceiling Fan energy efficient type of 1200 mm sweep, with 5 star rating having input power (max) 28 Watts, suitable for 240 volt, 50 hz single phase ac supply with minimum 5 years replacement warranty. Preferable makes :- Atomberg/ Orient / Bajaj / Usha / Gorilla/ Super fan/CG etc..," | — | — | — | 11,700 | |
| — | 10.00 | — | — | ||
| Supply and Fixing of 0.75 Sq,mm 3Core Copper wire for wiring from Controlling switch to street light fittings | — | — | — | 420 | |
| — | 1.00 | — | — | ||
| Supply and fixing of 250mm sweep size BLDC Exhaust fan on the suitable location with clamps on the already constructed hole on the wall as directed by site Engineer. | — | — | — | 3,332 | |
| — | 3.00 | — | — | ||
| "Supply & Fixing of 25W LED street light fittings on the Octogonal Poles/Rail Poles/Wall of the building with suitable GI pipe and clamps if necessary. GI pipe has to be bend as directed at site including wiring arrangements/Point wiring to the fittings. Preferable Makes :- Wipro, Bajaj, Havells, Surya, Syska, Osram, Philips, CG or any other Reputed makes." | — | — | — | 7,119 | |
| — | 2.00 | — | — | ||
| Supply and fixing of 3 plate ceiling rose as directed by site engineer incharge. | — | — | — | 140 | |
| — | 4.00 | — | — | ||
| Supply at site, fixing of 3pin or 5pin Modular type Socket - 6A with 1Way modular controlling switch of L&T, Legrand make or similar on the already erected modular control /switch boards including internal wiring [ Socket - 2 Module, Switch 1 Module ] | — | — | — | 1,984 | |
| — | 3.00 | — | — | ||
| Supply at site, fixing of modular type socket - 16A with 1Way modular controlling switch of L&T, Legrand make or similar on the already erected modular control /switch boards including internal wiring [ Socket - 2 Module, Switch 1 Module ] | — | — | — | 2,286 | |
| — | 7.00 | — | — | ||
| "Supply and concealing of sheet metal boxes with 3-way module along with modular frame & plate including plastering and finishing to original level. Preferable makes:- Legrand, ABB, L&T, C&S, Crabtree or any other reputed makes." | — | — | — | 2,961 | |
| — | 2.00 | — | — | ||
| "Supply and concealing of sheet metal boxes with 6-way module along with modular frame & plate including plastering and finishing to original level. Preferable makes:- Legrand, ABB, L&T, C&S, Crabtree or any other reputed makes." | — | — | — | 1,116 | |
| — | 1.00 | — | — | ||
| "Supply and concealing of sheet metal boxes with 12-way module along with modular frame & plate including plastering and finishing to original level. Preferable makes:- Legrand, ABB, L&T, C&S, Crabtree or any other reputed makes." | — | — | — | 723 | |
| — | 40.00 | — | — | ||
| "Supply and Single phase wiring by means of 2 nos. of 1.5 Sq.mm (P&N) and 1 No. of 2.5 Sqmm (Earth) size Flame Retardant Low Smoke & Halogen (FR- LSH) PVC insulated single core multistranded flexible copper cable with ISI mark of approved make with coded color for Phase, Neutral and Earth through already erected PVC casing and capping or pipes, junction boxes, distribution boards etc., Preferable Makes of FR-LSH Cables :- Poly Cab, Havells,V-Guard, Bonton or any other reputed makes, " | — | — | — | 5,920 | |
| — | 30.00 | — | — | ||
| "Supply and Single phase wiring by means of 2 nos. of 2.5 Sq.mm (P&N) and 1 No. of 4 Sqmm (Earth) size Flame Retardant Low Smoke & Halogen (FR-LSH) PVC insulated single core multistranded flexible copper cable with ISI mark of approved make with coded color for Phase, Neutral and Earth through already erected PVC casing and capping or pipes, junction boxes, distribution boards etc., Preferable Makes of FR-LSH Cables :- Poly Cab, Havells,V-Guard, Bonton or any other reputed makes, " | — | — | — | 5,760 | |
| — | 40.00 | — | — | ||
| "Supply and Single phase wiring by means of 2 nos. of 4 Sq.mm (P&N) and 1 No. of 6 Sqmm (Earth) size Flame Retardant Low Smoke & Halogen (FR- LSH) PVC insulated single core multistranded flexible copper cable with ISI mark of approved make with coded color for Phase, Neutral and Earth through already erected PVC casing and capping or pipes, junction boxes, distribution boards etc., Preferable Makes of FR-LSH Cables :- Poly Cab, Havells,V-Guard, Bonton or any other reputed makes, " | — | — | — | 11,760 | |
| — | 30.00 | — | — | ||
| "Supply and laying of ISI marked medium duty PVC Rigid wiring Conduit of 20mm Dia & Wall thickness 1.6mm+/-0.2mm for Concealed Wiring including, tees, bends, junction boxes etc.., plastering and finishing to original level. Preferable Makes :- Precision, Anchor, Avoplast, VIP, Balco, Inplast or any other reputed makes. " | — | — | — | 1,830 | |
| — | 40.00 | — | — | ||
| "Supply and laying of ISI marked medium duty PVC Rigid wiring Conduit of 25mm Dia & Wall thickness 1.6mm+/-0.2mm for Concealed Wiring including, tees, bends, junction boxes etc.., plastering and finishing to original level. Preferable Makes :- Precision, Anchor, Avoplast, VIP, Balco, Inplast or any other reputed makes. " | — | — | — | 2,920 | |
| — | 30.00 | — | — | ||
| "Supply and laying of ISI marked Medium duty PVC rigid wiring conduit pipe of size 20mm dia for Open wiring including, tees, bends, junction boxes etc and finishing to original level & Wall thickness 1.4mm +/- 0.2mm. Preferable Makes :- Precision, Anchor, Avoplast, VIP, Balco, Inplast or any other reputed makes. " | — | — | — | 1,860 | |
| — | 11.00 | — | — | ||
| Supply and wiring to light/fan points by means of by means of 2 nos. of 1.5 Sq.mm (P&N) and 1 No. of 2.5Sqmm (Earth) size Flame Retardant Low Smoke & Halogen (FR- LSH) PVC insulated single core multistranded flexible copper cable with ISI mark of approved make with coded color for Phase, Neutral & Earth through already erected PVC casing and capping or pipes, junction boxes, distribution boards etc., and including supply and fixing of modular type 1way controlling switches 6A of Carbtree / Legrand / ABB / L&T / Siemens / C&S make on the already erected boards/boxes including supply and fixing of PVC round block, PVC angle holder/Ceiling rose | — | — | — | 6,820 | |
| — | 14.00 | — | — | ||
| "End termination using single brass compression gland of Size from 4 core 16 Sq.mm up to & Including 4 Core 25 Sq.mm with required aluminium sockets, etc.., Note:- 1) Scope of work including supply ad Fixing of said glands 2) PVC type glands may be used for cable termination in the poly carbonate box as directed by site engineer incharge." | — | — | — | 3,500 | |
| — | 2.00 | — | — | ||
| "Supply, erection, testing and commissioning of Octagonal poles of 4 m high with decorative Single arm, Top dia 70mm, Bottom dia 130mm, sheet thickness 3mm, with suitable casting of cement concrete foundation & muffing Including Supply, fixing of 40W to 50W LED Street light and wiring to the LED Fittings. Note :-Drawing to be submitted for approval before fabrication of Octagonal poles." | — | — | — | 70,118 | |
| — | 2.00 | — | — | ||
| "Supply, erection, testing and commissioning of Octagonal poles of 4 m high (without bracket), Top dia 70mm, Bottom dia 130mm, sheet thickness 3mm, with suitable casting of cement concrete foundation & muffing Including wiring to the LED Fittings. Note :-Drawing to be submitted for approval before fabrication of 4m Octagonal poles." | — | — | — | 44,000 | |
| — | 2.00 | — | — | ||
| "Supply and Fixing of C Channel of Approx. size 70x40x5x7 mm with 800mm length (Two Way Cross Arm Complete) with Suitable Fixing Arrangements. Note :- Said C channel (Two way Coss Arm) has be fixed on the Octagonal poles as directed by site Engineer in charge. " | — | — | — | 2,000 | |
| — | 4.00 | — | — | ||
| "Supply and fixing of 80W flood type LED type luminaire on the already erected Dwarf rail poles / 2 way cross arms of Octagonal poles. Preferable Makes :- Surya, Philips, CG, Bajaj, GE, Wipro, HPL or any other reputed makes." | — | — | — | 27,196 | |
| — | 2.00 | — | — | ||
| "Supply at site and fixing of Transparent/Opaque type Poly carbonate box Similar to model No. KG 9003/KG 9003 IN fitted with the followings 1) 100A 4 Way connector - 1Nos." | — | — | — | 8,062 | |
| — | 18.00 | — | — | ||
| Supply and Fixing of 1.0 Sq,mm 3Core Copper wire for wiring from Controlling switch to street light fittings | — | — | — | 972 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .