Repair and replacement of LT Cables MCCBs, LT panels including connected work under AGE E/M GE (AF) No. 2 Jodhpur

Amount

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for route of cable and getting out complete all as specified and as directed by the Engineer-in-Charge.

Returning, filling in soft/loose soil including spreading, leveling, watering and well ramming, in layers not exc 25 cm complete all as specified and as directed by the Engineer-in-Charge.

Removing of surplus soil to a distance not exc. 50 meter and depositing where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed by the Engineer-in-Charge.

M/&L for stone slab 40 to 50 mm thick rough dressed Jodhpur stone slab cover in trenches for protection of cable 25 to 30 cm wide and not less then 50 cm in length laid dry abutting each other with gap between adjacent slab not exceeding 10 mm over sand cushioning all as specified and directed by Engr-in-Charge.

supply and laying of Local tibba dry sand cushioning and cover (8 cm thick layer of sand before laying of cable and 15 cm thick layer of sand after laying of cable) for protection of cable, material and labour complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of PVC underground cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sqmm 4 core material and labour complete all as specified and as directed by Engineer-in-Charge..

S&F in replacement of PVC underground cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sqmm 4 core material and labour complete all as specified and as directed by Engineer-in-Charge..

S&F in replacement of PVC underground cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm 4 core material and labour complete all as specified and as directed by Engineer-in-Charge..

S&F in replacement of PVC underground cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sqmm 4 core material and labour complete all as specified and as directed by Engineer-in-Charge..

S&F in replacement of PVC underground cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm 4 core material and labour complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of PVC underground cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 06 sqmm 4 core material and labour complete all as specified and as directed by Engineer-in-Charge..

S&F IN repair of MCCB 4 Pole , 415 V, Adjustable type,250 Amps with breaking capacity 36 KA material and labour complete all as specified and as directed by Engineer-in-Charge..

S&F IN repair of MCCB 4 Pole , 415 V, Adjustable type,200 Amps with breaking capacity 36 KA material and labour complete all as specified and as directed by Engineer-in-Charge..

S&F IN repair of MCCB 4 Pole , 415 V, Adjustable type,160 Amps with breaking capacity 36 KA material and labour complete all as specified and as directed by Engineer-in-Charge. .

S&F IN repair of MCCB 4 Pole , 415 V, Adjustable type,100 Amps with breaking capacity 36 KA material and labour complete all as specified and as directed by Engineer-in-Charge..

S&F in repair of Building security light fittings, with pressure die cast aluminium housing, suitable for 25 W LED, complete pre-wired, incl suitable bracket for fixing light on wall or any indicated locaction all as specified and as directed by Engr - in Charge complete all as per Havells Cat No: ENDURAPEARLSL25W or equivalent model in approved make given in appendix 'B'.

S&F in repair of Building security light fittings, with pressure die cast aluminium housing, suitable for 35 W LED, complete pre-wired, incl suitable bracket for fixing light on wall or any indicated locaction all as specified and as directed by Engr - in Charge complete all as per Havells Cat No: ENDURAPEARLSL35W or equivalent model approved approved make given in appendix 'B'.

S&F in repair of Building security light fittings, with pressure die cast aluminium housing, suitable for 60 W LED, complete pre-wired, incl suitable bracket for fixing light on wall or any indicated locaction all as specified and as directed by Engr - in Charge complete all as per Havells Cat No: ENDURAPEARLSL60W or equivalent model approved approved make given in appendix 'B'.

Supply and fixing in repair of post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete.

Supply and fixing in repair of post top lantern LED type 40/45 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete.

Supply and fixing in repair of round shape bollard 10 w integral decorative with ip 66 degree of protection of capacity 10 watt LED with all accessories pole, foundation , complete errect/fixed/mount properly at directed place with reqd fixing/mounting arrangement and connecting/testing complete all as specified by Engr-in-Charge. Make- Havells or quivalent approved make given in appendix 'B'.

Supply and fixing in repair of 60 W integral decorative with ip 66 degree of protection of capacity 60 watt LED with all accessories including pole size 40 mm dia made with casted iron ISI approved height 8 feet, foundation , complete errect/fixed/mount properly at directed place with reqd fixing/mounting arrangement and connecting/testing complete all as specified by Engr-in-Charge.make -havells or quivalent approved make given in appendix 'B'.

Supply and fixing in repair of 45 W integral decorative with ip 66 degree of protection of capacity 45 watt LED with all accessories made with casted iron ISI approved pole dia 40 mm height 7 feet, foundation , complete errect/fixed/mount properly at directed place with reqd fixing/mounting arrangement and connecting/testing complete all as specified by Engr-in-Charge.

Supply and fixing 20 w integral decorative with ip 66 degree of protection of capacity 20 watt LED with all accessories pole height 7 feet, foundation , complete errect/ fixed/mount properly at directed place with reqd fixing/mounting arrangement and connecting/testing complete all as specified by Engr-in-Charge.

Supply and fixing LED flood light 170 watt 230 V outdoor type with thermal management in multiple optics and equipped with IP 66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified by Engr-in-Charge.make- havells or quivalent approved make given in appendix 'B'.

Supply and fixing LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified by Engr-in-Charge.make- havells or quivalent approved make given in appendix 'B'.

Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified by Engr-in-Charge.make- havells or quivalent approved make given in appendix 'B'.

Supply and fixing in repair LED driver for garden /road light 50/52 watt ,240 volt,50 hz,IP-65 round shaped , complete all as specified and directed. Make:Bajaj Cat Part No BGCTN 45W LED Model-DSL PT BL 24 65 45 W (as per sample)

Supply and fixing in repair LED plate for garden /road light 50/52 watt ,240 volt,50 hz,IP-65 round shaped , complete all as specified and directed. Make:Bajaj Cat Part No BGCTN 45W LED Model-DSL PT BL 24 65 45 W (as per sample)

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechnical tools with manpower including passing HDPE 150 dia suitable for 0.4 mpa working pressure or GI pipe light grade 100 mm bore dia for proection of LT Cables. (Note : Quoted rate includes cost of protection pipe.)

Supply and fixing in replacement GI pipe light grade 40 mm bore (ISI marked) laid in trenches/ road crossings/ fixed to poles/ceiling / along walls/ path /drain/floors with and including all necessary clamps, nuts, bolts, washers etc and all fittings as required, complete all as specified and as directed by the Engineer-in-Charge. (Note :- Necessary excavation, earth work and same work shall be measured and paid for separately.)

M&L for cable jointing kit for LV/LT 1100 V cable for straight through , heat shrinkable type joint kit complete with jointing material and accessories suitable for 25 Sqmm to 50 Sqmm 3.5 core XLPE armoured aluminium conductor cable including testing after jointing, fixing in replacement complete all as specified as directed by Engineer-in-Charge.

Supply and fixing in repair copper thimble (Lugs)16 sqmm suitable for XLPE cable 16 sqmm complete all as specified and directed.

Supply and fixing in repair copper thimble (Lugs) 25 sqmm suitable for XLPE cable 25 sqmm complete all as specified and directed.

Supply and fixing in repair copper thimble (Lugs) 35 sqmm suitable for XLPE cable 35 sqmm complete all as specified and directed.

Supply and fixing in repair copper thimble (Lugs) 50 sqmm suitable for XLPE cable 50 sqmm complete all as specified and directed.

Supply and fixing in repair driver for post top 20 W ,240 volt,50 hz,IP-65 round shaped , complete all as specified and directed. Make: Crompton Cat Part No-LPTH-20-CDL (as per sample)

Supply and fixing in repair driver for post top 40 W ,240 volt,50 hz,IP-65 round shaped , complete all as specified and directed.Make: Crompton Cat Part No-LPTH-40-CDL (as per sample)

Supply and fixing in repair street light bracket made of 32 mm GI pipe , 1.2 mtr lenght fixed with two nos of clamp , nut and bolts complete all as specified and directed.

NOTES FOR LED LIGHT FITTINGS & BULBS : (i) All LED light/luminare shall meet the provision laid down in IS - 16101, 16102 Part-I/II, 16103 Part-I, 16104, 16105, 16106, 16108/2012 and 15885 Part -II / Section 13. (ii) Contractor shall submit test report of LED street light fitting from Government accredited test laboratory for LM-79 and LM-80. (iii) Contractor has to furnish a replacement warranty of 02 years for LED light fittings complete including lamps from the date of completion of contract. The product will be replaced on site free of cost in the following case :- (a) Manufacturing defects. (b) Failure due to mechanical and electrical impact. (c) Drop in lumen (or lux at 1 m) below 90% of claimed values of lumen (or lux at 1 m) of the LED /Luminaries.

Material and labuor for earthing complete with Galvanized Steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 M below normal ground level and filled with 15cm thick alternate layers of charcoal and salt, connected & including GI wire earth lead 4.0mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron protected by 15mm dia GI Pipe (light grade). Earth plate shall be surrounded by alternate layers of charcoal or coke and common salt in 15cm thick in layers & 15cm of widht all aurround of earth plate including 20mm dia GI light grade pipe for watering and including funnel, wire mesh, necessary earth work in any type of soil, Pre-cast RCC cover duly re inforced with 8mm dia TMT Bar @150 mm c/c both ways, one lifting handle made of 8 mm dia TMT bar embedded in cover slab, Earth Pit of PCC (1:3:6) type C2 (using 20mm graded crushed store aggrgate) complete all as specified and as shown in electrical plate No-3 of SSR Part-I including testing on completion. Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) The unit rate includes earthing lead & protection pipe upto 7.5 metre from top of earth plate.

Supply and replace sheet metal enclosure distribution board for 240 volts, 2 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete including taking out old all as directed.

Supply and replace sheet metal enclosure distribution board for 240 volts, 8 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete including taking out old all as directed.

Supply and replace sheet metal enclosure distribution board for 240 volts,12 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete including taking out old all as directed.

Supply and replace Sheet metal enclosure distribution board TPN, 415 volts, 4 way Horizontal/vertical type as per site requirement, double door type, 200 Amps rated neutral copper bus bar for housing MCBs and including provision for fixing TPN MCB as incommer, DB fixed flush or in wall surface including making good to damaged surface of wall to match with existing specification complete including taking out old all as specified all as specified and directed. Note : MCB SP/SPN/TPN will measured and paid separately under relavant item.

Supply and fixing MCB single pole 6-32 Amps, 240 volts, 10 kA rupturing capacity providing in DB complete including connection & testing all as specified.

M&L for MCB SPN/DP 40 to 63 Amps 240 volts, 10 kA rupturing capacity providing in DB complete including connection & testing all as specified.

M&L for MCB TPN/FP, 40 to 100 Amps 415 volts, 10 kA rupturing capacity providing in DB complete including connection & testing all as specified.

M&L for road cutting of any size and any type for laying and excavation of cable and making good to the damaged road including surface finish of road with PCC or cement work or mortar as required all as specified all as specified and directed.

Gaurav & company (BID ID -3178071)

SANJOLI CONSTRUCTION COMPANY (BID ID -3177488)

M/s Shiv Builder and Suppliers (BID ID -3179795)

LOKESH ELECTRICAL WORKS CONTRACTOR (BID ID -3179662)

KRISHNA CONSTRUCTION COMPANY (BID ID -3179249)

M/S VENUS BUILDER (BID ID -3179690)

Sachiyay maa Electricals (BID ID -3180013)

Shri Electrical Enterprises (BID ID -3180035)