Tender for Painting of 132 kV Sub-Station Building, Replacement of Damaged/broken Mirrors with new aluminium fitting and Minor Petty work in Switch Yard at 132 kV Sub-Station Kandrori under ES Division Jasssure.

Repair to plaster in patches of 2.50 sqm and under and 10 to 15 mm thick including cutting the patch in proper shape and replastering the surface of the walls including disposal of rubbish to the dumping ground with in a lead of 20 metres with:- cement mortor 1:4

Distempering with oil bound washable Emulsion of approved brand and manufacture to give an even shade Old work (two or more coats) over and including water thinnable priming coat with cement primer

Finishing walls with Acrylic Smooth exterior paint of required shade Old work (Two or more coat applied @ 1.67ltr/ 10 sqm) on existing cement paint surface

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level (Mild steel and Medium Tensile steel bars)

Providing Form work with Steel Plates 3.15 . Thick , welded with angle iron in frames 30 x30 x5 mm, sso as to give a fair finish including Centring, Shuttering Strutting and Propping etc with Wooden Battens and Ballies, height of Propping and Centring below supporting Floor to ceilling not exceeding 4 mtrs and removal of the same for insitu - Reinforced Concrete and Plain Concrete Work in Vertical Surfaces such as Walls (any thickness) Partitions and the like including attached pillasters Buttresses, Plinth and String Courses and the like. Sides (0.6+2)/2=1.3 & (3.6+4)/2=3.8

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer incharge. (Glazing, paneling and dash fasteners to be paid for separately Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. With float glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm)