Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.2 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹21.4 L+₹88,392 (4.32%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹26.0 L+₹5.6 L (27.2%)Rejected-Finance OPP JASWANT PLAZA BAWA TRADING COMPANY CAMP ROAD TALAB TILLO JAMMU JAMMU JAMMU KASHMIR 180002 | JAMMU | JAMMU AND KASHMIR | 180002 | L3 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
16 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SAMBA
SAMBA
REPAIR TO JOINERY AND CONNECTED ITEMS IN ZONE I AT MIL STN SAMBA
2023_MES_602706_2
GE/SMB/T-28/2023-24
Open Tender
Civil Works
Item Rate
180 days
SAMBA
REFER NIT
8 documents required · 8 mandatory
₹500
Yes
GE SAMBA
₹40,000
Yes
27 Oct 2023
24 Aug 2023
18 Sept 2023
24 Aug 2023
16 Sept 2023
31 Aug 2023
24 Aug 2023 - 26 Aug 2023
Amount
Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts of dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finishing PCC 1:2:4 or cement plaster 1:4 without any extra cost to Govt ), Complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from frames) area exc 1.5 sqm not exceeding 4 square metre each, including cutting holes for taking out hold fasts of dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt), Complete all as specified and directed.cified
Taking down shutter of any description exc 1.00 Sqm but not exc. 2.0 sqm each and removing to store.
Non - skid / Anti skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15 mm thick screed bed in CM 1:4. Including Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface (but not backing), removing serviceable tiles to store and rubbish off the premises. Complete all as specied and directed.
Description all as item No 04 above but as in vertical surfaces dado/skirting over and including a backing coat of CM 1:4, 10 mm thick Including Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface (but not backing), removing serviceable tiles to store and rubbish off the premises. Complete all as specied and directed.
Non - skid / Anti skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15 mm thick screed bed in CM 1:4. Including Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface (but not backing), removing serviceable tiles to store and rubbish off the premises. Complete all as specied and directed.
Description all as item No 06 above but as in vertical surfaces dado/skirting over and including a backing coat of CM 1:4, 10 mm thickIncluding Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface (but not backing), removing serviceable tiles to store and rubbish off the premises. Complete all as specied and directed.
Glazed ceramic coloured tiles in vertical surface 300x450x7 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick CM 1:4 all as specified. Including Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface (but not backing), removing serviceable tiles to store and rubbish off the premises. Complete all as specied and directed.
Brick work with sub class 'B' burnt bricks straight or curved on plan exc. 6 m mean radius bult in CM 1:6 including Demolition of brick work or stone masonry, built in cement mortar incl all quoins, arches pillars etc Complete all as specified and directed.
Taking down cement plaster on brick/concrete surfaces or stone walls, ceiling, etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed . NOTE- Work will be carried out upto 2nd storey of bldgs also as per direction of Engr-in-charge including necessary scaffolding required as per site conditions & no extra payment shall be made on this account.
Rendering 10mm thick in CM 1:4 on fair/unfair faces of brick work or concrete surfaces finished fair & even without using extra cement , complete all as specified and as directed by Engineer-in-charge.
10 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 and finished even and fair without using extra cement, , complete all as specified and as directed by Engineer-in-charge.
Rendering 10mm thick in CM 1:4 on fair/unfair faces of brick work or concrete surfaces finished fair & even without using extra cement , Complete all as specified and directed.
10 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 and finished even and fair without using extra cement, complete all as specified.
Preparation of new plastered surfaces of walls & applying two coats of oil bound distemper including smoothing of plastered surface by applying wall care putty and one coat of primer complete all as specified.
Two coats of cement based paints including preparation to newly plastered surfaces of walls etc completed all as specified.
Pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., Complete all as specified and directed.
Pressed steel frames 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., Complete all as specified and directed.
30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as directed by Engr-in-Charge.
35 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, Complete all as specified and directed.
Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat forfixing etc. complete all as specified, complete all as specified and as directed by Engr-in-Charge.
Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections eighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges 100mm long (2 no.) suitable handle (1 no.) Complete all as specified and directed.
Welding in repairs exc 2.5cm n exc 5cm in length thickness of metal n exc 6 mm thick complete all as specified and as directed.
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm Plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifications and drawing including making good to disturbed surface of walls, complete all as specified and as directed by Engr-in-Charge.
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed by Engr-in-Charge.
Aluminium anodised Hasp and stapple 100 mm size complete all as specified and as directed by Engr-in-Charge.
Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engr-in-Charge.
Stainless steel grade wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, fixed in repairs complete all as specified and as directed by Engr-in-Charge.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed by Engr-in-Charge.
Sheet glass 3mm th ordinary quality , n.exc 0.50 sqm fixed to metal frame with oil putty or wooden beading / fixed in Aluminium frame as per requirement in each pane complete all as specified and as directed by Engr-in-Charge.
Sheet glass 4mm th ordinary quality , n.exc 0.50 sqm fixed to metal frame with oil putty or wooden beading in each pane complete all as specified and as directed by Engr-in-Charge.
Sheet glass 5 mm th ordinary quality exc 0.50 sqm fixed to metal frame with oil putty or wooden beading in each pane complete all as specified and as directed by Engr-in-Charge.
Figured sheet glass , ordinary quality 4.00 mm thk and glazing with oil putty in square not exceeding 0.5 sq m in each pain complete all as spd.
Solar control film 25 micron reflective type (gareware sun control or equiva lent) complete all as specified and as directed by Engr-in-Charge.
Double action floor spring hydraulically regulated made aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repairs. Complete all as specified and directed.
Aluminium(extruded section) door closer hydraulically , universal type , suitable foor door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed in repairs complete all as specified and as directed by engineer in charge.
Aluminium(extruded section) door closer hydraulically regulated designation no-3 , universal type , suitable foor door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed in repairs complete all as specified and as directed by engineer in charge.
Aluminium tower bolt 200 mm long anodised barrel tower bolts of extruded section complete all as specified.
Aluminium tower bolt 75 mm long anodised barrel tower bolts of extruded section complete all as specified.
Aluminium tower bolt 200 mm long anodised barrel tower bolts of extruded section, fixed in repairs, complete all as specified.
Aluminium handle 150 mm long cast type anodised, complete all as specified and as directed by Engr-in-Charge.
Aluminium handle 150 mm long cast type anodised, fixed in repairs, complete all as specified and as directed by Engr-in-Charge.
250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed in repairs, complete all as specified and as directed by engineer in charge.
250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by engineer in charge.
Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor over all length of cover plate 80 mm complete all as specified and directed
Butt hinges 100 mm extruded alu minium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and as directed by Engr-in-Charge.
Door Seal fixed in repairs, complete all as specified and as directed by engineer in charge.
300mm, MS ordinary' door spring plate type incl roller and roller plate complete all as specified and as directed by Engr-in-Charge.
300mm, MS ordinary' door spring plate type incl roller and roller plate, fixed in repairs, complete all as specified and as directed by Engr-in-Charge.
Two coats of synthetic enamal paint over a coat of pink primer on wood/wood based surfaces over 10cm width or girth including preparation of new surfaces.complete all as specified and as directed by Engr-in-Charge.
Preparation of new or previously untreated surface of steel or iron surfaces of any description over 10cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-Charge.
Factory made 16 mm ((+) or (-) 1 mm) thick HDHMR high density board as cupboard shutter /shelvescomplete as per manufacturer's instruction individual member will be measured for payment purpose as directed. Complete all as specified and directed.
20mm outer dia plainchromium plated (SS Finish) decorative drapery rod of thickness 20 gauge and including side end cap with stainless brackets near to ends with stainless steel finish for at both ends. Complete all as specified and as directed.
Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars (MS Flat), barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified of design and as directed by Engr-in-Charge. Guard bars to be fixed in brick work wiht hold fast embedded in PCC .
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets / Existing grid, complete all as specified and as directed by Engr-in-Charge.
4mm thick designer ceiling board in ceiling fixed in ceiling laid over and including hot dipped galvanised iron grid (powder coated ) with 24 mm wide T section exposed flange . The frame work shall comprise of main runner made from 0.33mm thick galvanished steel sheet spacing at 600X600 mm and perimeter wall angle shall be of size 19X19mm complete all as specified and as directed.
7 - 8 mm thick designer ceiling board in ceiling fixed in ceiling laid over and including hot dipped galvanised iron grid (powder coated ) with 24 mm wide T section exposed flange . The frame work shall comprise of main runner made from 0.33mm thick galvanished steel sheet spacing at 600X600 mm and perimeter wall angle shall be of size 19X19mm complete all as specified and as directed.
2nd class hard wood 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, Complete all as specified and directed.
30 / 40 mm flaps width continuous (paino) hinges mild steel brass bright finished or electrogalvanised, Complete all as specified and directed.
PCC 1:3:6 type B-0 using 12.5 mm graded crushed stone aggregate as in hold fast /back filling of chowkhat complete all as directed.
Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. Complete all as specified and directed.
2nd class HW plain solid straight chowkhat and frames wrought, framed rebated on solid, rounded or chemfered put togather with glued pinned but in segemantal work complete all as specified and as directed.
Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents.
THAKUR BUILDERS AND CO
M/S BAWA TRADING CO
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .