Loading
Loading…
Loading…
Tender Value
₹1.5 Cr
EMD Value
₹2.2 L
Closing Date
24 Dec 2025, 12:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
SR.DEN3
15 conditions · 3 needing a document upload
Financial Eligibility Criteria (Clause 10.2 of part-I GCC-2022): The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Similar Nature of work:- "Any P.Way Works".
15 conditions · 4 needing a document upload
A copy of certificate stating that they are not liable to be disqualified and all their statements/documents submitted along with bid are true and factual. Standard format of the certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to Annexure-V, in case of other than Company/Proprietary firm, Annexure-V(A) shall also be submitted by the each member of a Partnership Firm/Joint Venture (JV)/Hindu Undivided Family (HUF)/Limited Liability Partnership (LLP) etc. as the case may be. Non submission of a copy of certificate by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested / digitally signed by which they/he are/is qualifying the Qualifying Criteria mentioned in the Tender Document.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be.
If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm / Partnership firm / Joint Venture / Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender.
After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm / Registered Company/ Registered Trust / Registered Society / HUF/LLP etc. shall be neither asked nor considered, if submitted. Further, no suo moto cognizance of any document available in public domain (i.e., on internet etc.) or in Railway's record/office files etc. will be taken for consideration of the tender, if no such mention is available in tender offer submitted.
The tenderer whether sole proprietor / a company or a partnership firm /registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association/Board resolution, failing which tender shall be summarily rejected.
A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Appostille certificate.
(ii)Following documents shall be submitted by the tenderer:
(a) Sole Proprietorship Firm: (i) All documents in terms of Para 10 of GCC/2022 of the Tender Form (Second Sheet) above (b) HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of GCC/2022 of the Tender Form (Second Sheet) above (c)The following documents shall be submitted by the partnership firm, with the tender: i. A notarized copy of the Partnership Deed or a copy of the Partnership deed registered withthe Registrar. ii. A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. iii. An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract. iv. All other documents in terms of Para 10 of GCC/2022 of the Tender Form (Second Sheet). (d) Joint Venture (JV): All documents as mentioned in para 17 of GCC 2022 of the Tender Form (Second Sheet) (e) Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above. (f) LLP (Limited Liability Partnership): (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet). (g) Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of GCC/2022 of the Tender Form (Second Sheet) above.
(iii) If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm / Partnership firm / Joint Venture / Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender. (iv) After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm / Registered Company/ Registered Trust / Registered Society / HUF/LLP etc. shall be neither asked nor considered, if submitted. Further, no suo moto cognizance of any document available in public domain (i.e., on internet etc.) or in Railway's record/office files etc. will be taken for consideration of the tender, if no such mention is available in tender offer submitted. (v) A tender from JV shall be considered only where permissible as per the tender conditions. (vi) The Railway will not be bound by any change of power of attorney or in the composition of the firm made subsequent to the submission of tender. Railway may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the Contractor.
A copy of Documents against eligibility criteria must be submitted along with the E-tender. No any documents against the same will be entertained in the office of Divisional Railway Manager, Dhanbad or anywhere else at any time. Tender will be decided purely on the basis of documents available/attached with the E-tender irrespective of whether tenderer is working contractor or new. However Railway may ask clarification with respect to document available/attached with the E-tender, if required.
In case, submission of Bid Security in the form of Bank Guarantee, the original Bank Guarantee should be delivered to COS/Bill & Tender/Dhanbad (Official Nominated) before closing date for submission of bids. (i.e. excluding the last date of submission of bids) as per Para 3 (ii) of Sl. No.13 (Bid Security) of the tender document.
Dhanbad Division:- TTR (CS+CMSC=62Sets), (TWS+CMSC=1Set), (TWS+WCMSC=1Set), (WCMSC=3Sets), (TWS=2Sets), (DS=3Sets), (TFR=7.722 Km), (Glued Joint= 163 nos.) & (SEJ=2nos.) under ADEN/2/GMO & ADEN/BRKA in the jurisdiction of Sr.DEN/3/DHN.
259-DHN-2025-26~ECR
259-DHN-2025-26
Open
Works - General
12 Months
Dhanbad, Jharkhand
₹0
₹2.2 L
24 Dec 2025
2 Dec 2025
10 Dec 2025
93 items across 1 schedule · ₹1,49,22,493.41 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Up to 40 m long rail panel | RM | 8000.00 | 8.15 | 65,200 |
| 2 | For Casual/Scattered Rail Renewal work | RM | 8000.00 | 31.36 | 2,50,880 |
| 3 | For Casual/Scattered Rail Renewal work | RM | 8000.00 | 33.22 | 2,65,760 |
| 4 | Fish plates with 4 fish bolts. | Joint | 700.00 | 200.81 | 1,40,567 |
| 5 | Fish plates of 6 bolts. | Joint | 200.00 | 297.02 | 59,404 |
| 6 | Through Fitting Renewal (TFR) on PSC track, comprising of renewal of Grooved Rubber Pads, Liners and ERCs without damaging PSC sleepers. Scope includes removal of all fittings, cleaning of rail seat, rail flange at liner seats, and eye of Inserts with wire brushes and applying Grease Graphite Grade "O" (IS:408) to eye of insert and central leg of ERC with contractor's grease of Railway's specification, fixing all fittings in correct position and sealing liner edges with grease all complete including collection and stacking of released materials at nominated locations within SSE Jurisdiction as directed by Engineer-in-Charge. Note: All the fittings will be supplied at SSE/Stores/Depot. | Sleeper | 12820.00 | 35.01 | 4,48,828.2 |
| 7 | For 1.00m long fishplates | Joint | 300.00 | 123.91 | 37,173 |
| 8 | For 610 mm long fish plates. | Joint | 400.00 | 87.87 | 35,148 |
| 9 | Lubrication of ERCs and its liner contact area by removal of ERCs and Metal / GFN liners in rail panel, cleaning of rust / scale of ERC, Metal / GFN liners & SGCI insert by using wire brush, scrapper / sand emery paper etc supply and application of graphite grease, as prescribed by Railway for under side of liners & corresponding area of rail foot & SGCI insert with ERCs and re-fixing the same as per procedure prescribed in latest edition of IRPWM with contractors grease and all other tools & plants complete and as directed. Note: Each ERC in this item shall constitute 1 ERC and its Liner Contact area. | ERC | 15000.00 | 6.39 | 95,850 |
| 10 | By using Contractor's Grease Graphite | Each | 10000.00 | 37.25 | 3,72,500 |
| 11 | Renewal of seized Plate/Rail screws on PSC Sleepers by using gas or any approved methods, duly drilling holes in broken screw and removing existing screw pieces from the holes along with existing dowels and fixing new contractor's dowels (procured from RDSO approved sources) and grouting around dowel with Epoxy materials of approved specification and refixing new Railway's rail/Plate screws duly greasing the screw with specified grease with all contractor's materials, consumables, tools & plants, labour with all lead, lift. Note: 1.Seized screws shall be identified and marked by JE/P.Way and verified at minimum SSE/P.Way In charge) level. 2. Due care shall be taken to avoid any damage to the sleeper 3.A penalty of 50% of the basic cost of new sleeper in nearest sleeper factory shall be levied on each, if sleeper gets damaged in the process. | Each | 2000.00 | 329.3 | 6,58,600 |
| 12 | Rail section of 52Kg and above | Each | 500.00 | 123.11 | 61,555 |
| 13 | Renewal of existing SEJ with improved SEJ with PSC sleepers under traffic block conditions as per approved drawing including fixing of special size bearing plate, rubber pad and other sleeper / rail fittings, greasing to the fittings, leading rails, sleepers & fittings to site, leading and stacking of released materials within a lead of 250m, cutting of Rails, drilling of holes, fixing of related fittings, providing temporary connection with fishplates till welding of SEJ is done and sleepers shall be given initial packing to make track fit for 20KMPH speed. Note: (1) Rail cutting and hole drilling shall be paid separately. (2) One set comprise complete SEJ on both rails at SEJ. | Set | 2.00 | 7,785.91 | 15,571.82 |
| 14 | 1 in 8½ Points & Crossing | Set | 30.00 | 11,901.18 | 3,57,035.4 |
| 15 | 1 in 12 Points & Crossing | Set | 8.00 | 16,211.07 | 1,29,688.56 |
| 16 | Derailing Switch | Set | 3.00 | 3,485.2 | 10,455.6 |
| 17 | Sleepers up to 2.85 m length | Each | 250.00 | 541.35 | 1,35,337.5 |
| 18 | Sleepers of length more than 2.85 m and up to 4.20 m | Each | 250.00 | 746.26 | 1,86,565 |
| 19 | Sleepers of more than 4.20 m length | Each | 100.00 | 1,176.8 | 1,17,680 |
| 20 | 1 in 8½ Turnout | Set | 64.00 | 3,335.64 | 2,13,480.96 |
| 21 | 1 in 12 Turnout | Set | 5.00 | 3,658.38 | 18,291.9 |
| 22 | 1 in 8½ Switch Assembly | Set | 64.00 | 11,811.93 | 7,55,963.52 |
| 23 | 1 in 12 Switch Assembly | Set | 5.00 | 13,179.08 | 65,895.4 |
| 24 | For 1 in 12 Turnouts | Set | 5.00 | 27,030.76 | 1,35,153.8 |
| 25 | For 1 in 8.5 Turnouts | Set | 2.00 | 21,624.61 | 43,249.22 |
| 26 | 1 in 8.5 Turnouts | Set | 5.00 | 2,965.32 | 14,826.6 |
| 27 | 1 in 12 Turnout | Set | 2.00 | 4,716.13 | 9,432.26 |
| 28 | For 1 in 12 Turnouts | Set | 5.00 | 7,393.72 | 36,968.6 |
| 29 | For 1 in 8.5 Turnouts | Set | 54.00 | 5,914.97 | 3,19,408.38 |
| 30 | Renewal of corroded slide chairs duly removing the old slide chairs by heating using contractors gas and equipments or by any approved methods and inserting Railways new slide chairs and plate screws including crossing of tracks, leading all required materials to site, stacking all released materials, with all contractor's tools, consumables, labour, lead, lift and incidental charges etc complete as directed by the Engineer in charge. Note: 1. All the fittings will be supplied at nearest SSE/Stores. 2. In case of damage of PSC sleeper, penalty at the rate of 25% of the current cost of sleeper shall be levied. | Each | 200.00 | 318.9 | 63,780 |
| 31 | Turnout sleepers of length up to 2.85 m | Each | 50.00 | 121.83 | 6,091.5 |
| 32 | Sleepers of length more than 2.85 m and up to 4.20 m | Each | 150.00 | 146.19 | 21,928.5 |
| 33 | Sleepers of length more than 4.20 m | Each | 50.00 | 158.38 | 7,919 |
| 34 | Under Traffic Block Conditions: | cum | 2000.00 | 46.52 | 93,040 |
| 35 | For 60 Kg Rail, Single shot crucible fitted with Automatic Tapping Thimble , 3 pieces Mould (Zircon washed) and Compressed Air Petrol/LPG pre heating technique | Each | 300.00 | 1,748.31 | 5,24,493 |
| 36 | For 60 Kg/60EI-R260 grade Rail, Single shot crucible fitted with Automatic Tapping Thimble Technology, 3 pieces Mould (Zircon washed) and Compressed Air Petrol heating technique. | Each | 400.00 | 1,613.06 | 6,45,224 |
| 37 | For 52 Kg - 90 UTS or 52 Kg 72UTS Rail, Single shot crucible fitted with Automatic Tapping Thimble Technology, 3 pieces Mould (Zircon washed) and Compressed Air Petrol heating technique. | Each | 10.00 | 1,613.06 | 16,130.6 |
| 38 | 25mm gap 'in-situ' welding during traffic block using Railway's welding portion & Welder and finishing of weld to meet the prescribed tolerances and pass all stipulated tests with all required labour, materials, consumables, tools, equipments etc. to complete the work in all respect as per IR's "Manual for Fusion Welding of Rails by Alumino - Thermic Process" with latest correction slips, including marking of welded joint, painting weld collar with anticorrosive paint, restoration of track near weld joint to original position and fixing of joggled fish plate at new weld, to be removed after passing of weld in USFD test as directed by Engineer in charge. Note: 1. Only welding portion and related accessories as per Annexure - I and Welder shall be supplied by Railways. 2. Hydraulic Weld trimmer shall be used for chipping and profile Grinder for finishing. 3. Required nos. of Joggled fish plates shall be supplied by Railway at nearest P. Way Stores and the same shall be returned at nearest P. Way Store or at other location as per direction of Engineer-in-Charge after release from track. | Each | 900.00 | 1,454.36 | 13,08,924 |
| 39 | 1 in 8½ PSC layout | Set | 40.00 | 10,186.64 | 4,07,465.6 |
| 40 | 1 in 12 PSC layout | Set | 5.00 | 13,267.04 | 66,335.2 |
| 41 | 1 in 8½ Derailing Switch | Set | 3.00 | 1,439.73 | 4,319.19 |
| 42 | Without Rail tensor | TRM | 10000.00 | 49.22 | 4,92,200 |
| 43 | Replacing existing glued joint rail with cut rails or with glued joint rail or insertion of glued joint by cutting existing track under traffic condition by cutting rails, refixing with all rail sleeper fastenings and providing required gaps for carrying out welding as an alternative to drilling holes or joining rails with fish plates duly drilling holes as required including stacking of released material and as directed by engineer in-charge. Note: (1) Drilling holes & rail cutting will be paid separately. (2) Transportation of materials to the site of work from supply points, if more than 250m, shall be paid separately. | Each | 605.00 | 1,576.35 | 9,53,691.75 |
| 44 | Cleaning of side drains along the track including disposing of muck beyond Railway boundary as per instructions of Engineer in- charge to keep drains clean and clear in cuttings etc. | RM | 7000.00 | 28.77 | 2,01,390 |
| 45 | Removing weeds & bushes in ballast section and cess up to 3.95m from centre line of track in mid section & station yard, as specified by Engineer in-charge including disposal of branches, bushes outside cess/yard. | TRM | 10000.00 | 13.23 | 1,32,300 |
| 46 | For 60 Kg Rails | RM | 8000.00 | 73.04 | 5,84,320 |
| 47 | For 60 Kg Rails | TRM | 1000.00 | 100.43 | 1,00,430 |
| 48 | Anti-corrosive painting to weld collar for Thermit welded rail joints on track for old painted joints in normal corrosive prone area for any rail section with two coats of ready mixed bituminous black paint of reputed make confirming to IS:9862 latest version on welded area up to 10cm on either side including on the underside of rail foot by brush including surface preparation as per Railway's AT Weld Manual including lettering / weld numbering with approved enamel paint as directed Note: 1.Before painting, dust, dirt and flaked paint from the welded joint shall be removed thoroughly by scrapping with wire brush. Grease and oil shall be removed by use of appropriate solvent confirming to latest IS:1745. 2.Use of detergent followed by water washing should also be done to ensure removal of oil and grease apart from the greasing compound. 3.The paint should be procured along with the thinner recommended by the manufacturer of the paint. 4.No other thinner like kerosene oil should be used. | Each | 500.00 | 25.04 | 12,520 |
| 49 | 1 in 12 Turnout | Set | 5.00 | 1,093.42 | 5,467.1 |
| 50 | 1 in 8½ Turnout | Set | 64.00 | 707.49 | 45,279.36 |
| 51 | Derailing Switch | Set | 3.00 | 353.74 | 1,061.22 |
| 52 | 60 Kg - 110/90 UTS - Outside Track | Each | 1000.00 | 311.53 | 3,11,530 |
| 53 | 52 Kg - 90 UTS - Outside Track | Each | 50.00 | 284.63 | 14,231.5 |
| 54 | 52 Kg - 72 UTS & other rails - Outside Track | Each | 20.00 | 170.22 | 3,404.4 |
| 55 | 60 Kg - 110/90 UTS - On Running Line | Each | 2000.00 | 390.78 | 7,81,560 |
| 56 | 52 Kg - 90 UTS- On Running Line | Each | 450.00 | 316.57 | 1,42,456.5 |
| 57 | Outside Track | Each | 2800.00 | 52.01 | 1,45,628 |
| 58 | On Running Line | Each | 4800.00 | 66.12 | 3,17,376 |
| 59 | Drilling holes of specified size for bond holes with 7.2mm dia drill twist to correct spacing and location on 60kg/52kg rails on cess or under traffic block with contractor's tools and plant, equipment, consumable, labour etc complete as directed by the Engineer in charge at site. | Each | 500.00 | 36.05 | 18,025 |
| 60 | I n Wagon where mechanical handling is possible and traffic block is not required or in Truck/trailer. | MT | 710.00 | 119.12 | 84,575.2 |
| 61 | I n Wagon where mechanical handling is possible and traffic block is not required or in Truck/trailer. | MT | 675.00 | 116.98 | 78,961.5 |
| 62 | For lead up to 500 metre. | MT | 500.00 | 340.23 | 1,70,115 |
| 63 | For lead beyond 500 metre and up to 1 Km. | MT | 700.00 | 439.46 | 3,07,622 |
| 64 | Extra to Items no. 171032 for lead beyond 1 Km for every subsequent Km or part thereof and up to 10 Km | MT | 700.00 | 52.69 | 36,883 |
| 65 | From wagons during period of traffic block where handling by mechanical means is not possible | MT | 200.00 | 157.05 | 31,410 |
| 66 | From Wagon where mechanical handling is possible and traffic block is not required or in Truck / trailer. | MT | 510.00 | 87.79 | 44,772.9 |
| 67 | For lead up to 500 metres | MT | 300.00 | 264.82 | 79,446 |
| 68 | For lead beyond 500 metre and up to 1 Km | MT | 300.00 | 393.45 | 1,18,035 |
| 69 | Extra to Items no. 172032 for lead beyond 1 Km for every subsequent Km or part thereof and up to 10 Km | MT | 100.00 | 41.09 | 4,109 |
| 70 | Lead up to 5 Km | MT | 250.00 | 150.44 | 37,610 |
| 71 | Lead beyond 5 Km and up to 10 km | MT | 100.00 | 195.7 | 19,570 |
| 72 | Lead beyond 10 Km and up to 20 km | MT | 50.00 | 258.1 | 12,905 |
| 73 | Lead beyond 20 Km and up to 30 km | MT | 50.00 | 335.07 | 16,753.5 |
| 74 | Lead beyond 30 Km and up to 50 km | MT | 20.00 | 443.22 | 8,864.4 |
| 75 | Lead beyond 50 Km and up to 100 Km | MT | 20.00 | 681.36 | 13,627.2 |
| 76 | Lead beyond 100 Km and up to 150 Km | MT | 50.00 | 1,035.3 | 51,765 |
| 77 | Extra for every Km per MT beyond 150 Km over item no. 172047 | MT-Km | 300.00 | 3.6 | 1,080 |
| 78 | Lead up to 5 Km | MT | 150.00 | 53.62 | 8,043 |
| 79 | Lead beyond 5 Km and up to 10 km | MT | 50.00 | 98.89 | 4,944.5 |
| 80 | Lead beyond 10 Km and up to 20 km | MT | 50.00 | 161.28 | 8,064 |
| 81 | Lead beyond 20 Km and up to 30 km | MT | 50.00 | 238.25 | 11,912.5 |
| 82 | Lead beyond 30 Km and up to 50 km | MT | 50.00 | 346.4 | 17,320 |
| 83 | Lead beyond 50 Km and up to 100 Km | MT | 50.00 | 584.54 | 29,227 |
| 84 | Lead beyond 100 Km and up to 150 Km | MT | 700.00 | 938.48 | 6,56,936 |
| 85 | Extra for every Km per MT beyond 150 Km over item no. 172057 | MT-Km | 4000.00 | 3.6 | 14,400 |
| 86 | From DMT - During period of traffic block | MT | 50.00 | 148.01 | 7,400.5 |
| 87 | From DMT - Not involving traffic block or on lines, not opened to traffic | MT | 50.00 | 104.94 | 5,247 |
| 88 | From Truck / Trailer | MT | 500.00 | 121.57 | 60,785 |
| 89 | Rails, switches, crossings, SEJ, Glued Joints, Check Rails etc. | MT | 600.00 | 337.04 | 2,02,224 |
| 90 | All type of PSC sleepers | MT | 500.00 | 368.44 | 1,84,220 |
| 91 | P.Way fittings of all types and other similar loose items | MT | 150.00 | 343.98 | 51,597 |
| 92 | Stacking of glued joints in single layer for electrical testing, in such a manner that glued joints - (a) shall not touch ground, (b) shall not touch one another, (c) shall not touch any rail or any metallic body, (d) shall not be water- logged from any side and (e) end post shall not rest on supports of glued joint | Each | 613.00 | 57.39 | 35,180.07 |
| 93 | Drilling of 25mm to 40mm dia. holes in PSC sleepers with suitable rotary hammer / drilling machine at indicated location for fixing of guard rails on bridges & its approaches as per approved drawing and fixing of contractor's HDPE dowels and adhesive of approved quality to Drawing no. RDSO/T-3002, procured from RDSO's approved sources with contractor's materials and consumable. | Each | 75.00 | 291.96 | 21,897 |
| Schedule total | ₹1,49,22,493.41 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .