Supply and Installation of Transformers on TURNKEY basis at different locations of Electrical Division Kattappana under Electrical Circle Thodupuzha

Air Break Switch (AB Switch) 11kV 400 A , Composite Polymer Housing

ALCO WASHER

Alkathene Pipe 50 mm

Angle cross arm GI 35 x 35 x 6 mm 0.5 mt

Bolt & Nut Forged Brass 1 1/4 X 3/8 with washer unit

Bolt & Nut GI of various sizes as per requirement

Cable 1.1kV XLPE AL 1c X 120 sq mm (Un Armoured)

Cable 1.1kV XLPE AL 1c x150 sq mm (Un Armoured)

Cable 1.1kV XLPE AL 1c X185 sq mm (Un Armoured)

Cable Tray GI (Perforated) 300 x 30 x 1.6mm-2.5 mt

Channel cross arm GI 75x40 mm- 1.8 M

Clamp GI for 2/4 line channel Cross Arm for PSC Poles 200kg

Clamp GI for Cable Tray in Transformer DP

Clamp GI for Danger Board (HT)

CLAMP GI FOR HT CROSS ARM

Clamp GI For Transformer Side Belting Angle

Clamp GI for V cross arm

Cleat GI for 11kV Disc insulator

COMPOSITE PIN INSULATOR 11 kV with Pin

Conductor ACSR Rabbit

Conductor ACSR Raccoon

Copper Flat Strip 40 x 3 mm length 115mm

COPPER STRIP 32 X 6 mm

Crimping Socket Palm Type 120 Sq.mm -Al (Cable Lug)

Crimping Socket Palm Type 150 Sq.mm -Al (Cable Lug)

Crimping Socket Palm Type 185 Sq.mm -Al (Cable Lug)

Crimping Socket Palm Type 95 Sq.mm -Al (Cable Lug)

CROSS ARM GI CHANNEL 100X50 mm 3 M

CROSS ARM GI CHANNEL 2 LINE(2 Line channel cross arm) for PSC Poles 8M/200kg

CROSS ARM GI CHANNEL 4 LINE(4 Line channel cross arm) for PSC Poles 8M/200kg

Danger Board 250 x 200 mm (11000 V)

Disc Insulator 11 kV Composite Polymeric

Distribution Box LT Outdoor 2 Way -415 v, 200 A-With Aluminium Main Busbar 40 x10 mm and Aluminium Inter connecting Bus bar 25x10 mm (Without Fuse Unit) Stainless Steel Sheet Shell 18 Guage-With CBN

Distribution Box LT Outdoor 3 Way -415 v, 200 A-With Aluminium Main Busbar 40 x10 mm and Aluminium Inter connecting Bus bar 25x10 mm (without fuse unit) Stainless Steel Sheet Shell 18 Guage-With CBN

Distribution Transformer 11kV/ 433 V 100 kVA 3 phase ONAN

Distribution Transformer 3 Phase 160 kVA 11kV/433 V ONAN (1 Star Rated)

Distribution Transformer 3 Phase 250 kVA 11kV/433 V ONAN (3 Star Rated)

FUSE DROP OUT 11 kV

FUSE UNIT 415 V 200A PORCELAIN

G.I.WIRE. 4MM (8 SWG)

GI Flat Strip 40 x 6 mm

GI Pipe Earthing set includes 1. Pipe GI 40 mm dia - 2.5 m Length( Earth Pipe) 2. Earth Chamber (RCC) With RCC Covering Slab 3. Earth Connector 95 Sqmm 4. Crimping Socket Palm Type 95 Sq.mm -Al(Cable Lug) etc as required as per technical specification, approved drawings and scope of work.

GI Stay Set includes ( HT) 1. Stay Insulator Porcelain 11k V - 2 Nos 2. Anchor Plate 200 x 200 x 8 mm GI (HT Stay Plate GI) 3. STAY TIGHTNER HT 4. Stay Wire 7/8 (7/3.15mm) GI (HT Stay Wire) 5. Stay Rod (Anchor Rod) GI 20 mm dia (HT Stay Rod) 6. Helically formed Guy-Grip HT 7. Thimble GI 75 mm x 22 mm x 40 mm ,1.5 mm Thickness (For HT and LT) 8. Stay clamp (GI ) etc as required as per technical specification, approved drawings and scope of work.

Hardware Fittings 11kV B&S Type

Helically Formed Fitting -Distribution Top Tie for ACSR Raccoon

LA Supporting Plate GI 500 x 300 x 3 mm

Lightning Arrester 9 kV,10 KA (Station class) Composite Polymer Housing

POLE A TYPE 11 M

POLE A TYPE 12 M

Pole PSC 8 M

Pole PSC 9 M

Pole Top Bracket -F Type GI -11 kV

SHACKLE INSULATOR 415V SET(WITH STRAP BOLT&NUT)

Stainless steel Buckles [20.5 mm x 1.5 mm; thickness 1.2 mm]

Stainless Steel Strap 10 mm x 0.7 mm-For clamping earth wire

V cross arm -GI -11 kV

Description of Work / Item(s)

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.

Additional rate for providing one disc set on any type of HT pole for making cut point.

Fitting and erecting one HT DP using PSC pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.

Fitting 5 channel cross arms, AB switch, DO fuse, LA, HT & LT connections on existing DP, 3 LT fuses.

Fitting one Additional V cross arm in existing single pole incl. conveyance of materials.

Drilling hole of various sizes on existing Channel/Cross Arm.

Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Fitting one additional Fuse unit and giving connection from Transformer to fuse and DB to LT OH line.

Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit.

Fitting and providing one Strut using HT PSC pole incl. digging & back filling pit.

Providing Transformer fencing , using 50x50x6mm Angle iron, 40 x 6 mm MS flat and 8 mm MS rod as specified, incl cost of transportation & foundation

Providing yard metalling with 6mm & 40mm thick blue metal as specified after constructing a curb wall.

Providing one Earth using earth pipe incl. digging separate pit at standard distance away from the pole/structure & backfilling.

Erecting one 100kVA Transformer to existing DP and giving connections, incl. loading & unloading, excluding transportation.

Transporting Transformers by hired vehicle upto 5km and upto 2 No. of 63 to 250kVA Transformers / RMUs excluding loading & unloading.

Fitting and erecting one HT DP using A type pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.

Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle).

Erection of LT 3 way distribution box on existing cross arm giving connection incl. cable and earth connection (excluding earthing).

Erection of LT 2 way distribution box on existing cross arm giving connection incl. cable and earth connection (excluding earthing).

Loading LT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Erecting one LT PSC Pole in position incl. digging & back filling pit.

Additional rate for refitting/redoing one Shackle set and reshackling one span while renewing any type of pole.

Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials.

Fitting one additional F top bracket

Fitting one LT 4 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT Line.

Fitting one additional HT pin with insulator

Erecting one 160kVA Transformer to existing DP and giving connections, incl. loading & unloading, excluding transportation.

Dismantling one Transformer upto 160kVA from structure and loading to vehicle incl. disconnecting HT/LT/Earth connections.

Transporting Transformers by hired vehicle to a distance beyond 5km and upto 2 No. of 63 to 250kVA Transformers / RMUs (Running km).

Transferring LT Sph 2/3 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.

Transferring LT 3ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.

Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification).

Additional rate for excavation of one Pit for HT Pole/HT Stay in Laterite.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Hard Laterite.

Erecting one 250kVA Transformer to existing Plinth/Platform and giving connections, incl. loading & unloading, excluding transportation.

Unloading one Transformer (upto and incl. 160kVA) from vehicle to ground incl. conveyance upto 25m.

Loading one Transformer (upto and incl. 160kVA) from ground to vehicle incl. conveyance upto 25m.

Fitting 6 channel cross arms, AB switch, DO fuse, LA, HT & LT connections on existing DP, 3 LT fuses.

Fitting one Additional 2.4m Channel cross arm in existing single pole incl. conveyance of materials.

Cutting Channel/Cross Arm/Angle Iron into two pieces.

Fitting and providing one HT Fly stay for 11kV pole using A type pole incl. digging & back filling pits.

Fitting and providing one Strut using A type pole incl. digging & back filling pit.

Transporting poles by hired vehicle to a distance beyond 5km and carrying upto 4 poles. (Running km).

Fitting and erecting one HT PSC Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Fitting and providing one HT Fly stay for 11kV pole using HT PSC pole incl. digging & back filling pits.

Additional rate for excavation of Pit for A type pole in Hard Laterite.

Additional rate for excavation of one Pit for LT Pole/LT Stay in Laterite.

Additional rate for excavation of one Earth Pit (2.5m depth) in Laterite.

Description of Work / Item(s)

Amount

TOTAL BOQ1 (Materials( Total Ex-work price of Materials + Total Transportation cost ) excluding GST.)

TOTAL BOQ2 (Installation / Erection Charges (Excluding GST)

TOTAL AMOUNT [1+2] (Excluding GST)

Discount offerred by Bidder(If any)

BOQ 3: TOTAL excluding GST [3 - 4]

Grand Total including GST (5+ GST Amount of BOQ1+GST Amount of BOQ2 )

Genisys Engineers and Contractors (BID ID -1995769)

ITHAL ENGINEERING GROUPS (BID ID -1996983)

ITHAL ENGINEERING GROUPS (BID ID -1996983)