Construction of Community Hall at Open plot No. 37-547-44 in Gazi Colony of Ward No.06 at Bhalki Town Bhalki Tq Bidar Dist BDR242113757

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Earth work excavation In ordinary/soft rock without blasting upto 1.5 m depth for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including ...

Earth work excavation Depth exceeding 1.5 m, but not exceeding 3 m for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

Providing and laying in position plain cement concrete Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/trap/basalt cru...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

FOOTING CENTERING Appendix I Additionalities for Formwork, Centering & Scaffolding Page No.111 KPWD. Volumn -1 KPWD SR 2023-24, .

COLUMNS CENTERING Appendix I Corrigendum-3 Additionalities for Formwork, Centering & Scaffolding Page No.111 KPWD. Sl.no 8.Volumn -1 KPWD SR 2023-24, .

COLUMNS CENTERING Appendix I Corrigendum-3 Additionalities for Formwork, Centering & Scaffolding Page No.111 KPWD. Sl.no 8.Volumn -1 KPWD SR 2023-24, .

PLINTH BEAMS CENTERING Appendix I Corrigendum-3 Additionalities for Formwork, Centering & Scaffolding Page No.111 KPWD. Sl.no 1a.Volumn -1 KPWD SR 2023-24, .

PLINTH BEAM rcc Qty

BEAMS & lintels CENTERING Appendix I Corrigendum-3 Additionalities for Formwork, Centering & Scaffolding Page No.112 KPWD. Sl.no 14.Volumn -1 KPWD SR 2023-24, .

Lintel beam rcc Qty

ROOF SLAB CENTERING Appendix I Corrigendum-3 Additionalities for Formwork, Centering & Scaffolding Page No.112 KPWD. Sl.no 15 Volumn -1 KPWD SR 2023-24, .

roof slab rcc & STAIRCASE Qty

CHAJJA CENTRING Appendix I Additionalities for Formwork, Centering & Scaffolding Page No.112 Sl.no.19 KPWD. Volumn -1 KPWD SR 2023-24, .

Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than ...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) inc...

Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth re...

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever requir...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete 125x64x1.90mm . Page No.107 Item no. 12.74.1 KPWD. Volumn -2 KPWD SR 2023-24, .

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 200x10mm Page No.107 Item no. 12.76.2 KPWD. Volumn -2 KPWD SR 2023-24, .

Providing and fixing bright finished brass handles with screws etc. complete: Page No.108 Item no. 12.79.1 KPWD. Volumn -2 KPWD SR 2023-24, .

Providing & fixing of 3 track x 2panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum iO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer)...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by thE manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of...

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give...

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer a...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) PWD SR 23-24 VOL-2 ITEM NO. 5.4

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required...

Providing & fixing corrugated G.S. sheet roofing including vertical /curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I...

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting,fixing in position and applying a priming coat of approv...

KKRDB NAME BOARD

Geophysical investigation at site for sinking borewells for supplying

drinking water to the habitation either through the Hand Pump MWS or

P.W.S.S, by vertical electrical sounding by adopting Venner S...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of

capacity 300 PSIG & above 1100 CMF & above in all strata including

over burdern upto 20 m. Fixing of casing pipes, collars and ...

Borewell depth of 50 to 100 m PG.NO 139 ITM.NO 12.1.2 VOLUME-5 KPWD SR 2023-24

Borewell depth of 100 to 50 m PG.NO 139 ITM.NO 12.1.3 VOLUME-5 KPWD SR 2023-24

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and

latest ammendments, electrical resistance welded steel tubes, ...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying, laying and jointing HDPE pipes of specified grade and

conforming to IS 4984-2016 with latest ammendments and conveying

to work site including loading and unloading at both destinations and

Providing,supplying to work site, Submersible Pump Set of 150mm dia

suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl

& Impeller with Low volt Motor as per specifications,as per ne...

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x2.5...

Supply, installing,testing and commissioning COMMON control panel

consisting of the following INCOMING:1 No set of Phase indicating

lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog

Earthing: Supplying and fixing and wiring earth electrode for grounding

circuits IC cutouts and other equipments on the meter board in the pit.

The pits should be filled up with equal proportion of sa...

Supply and delivery at site of brand new best make non-return valve as

per IS 778/1984 with ISI Mark and as per its latest amendments Size 65 mm PG.NO 162 ITM.NO 28.2 , VOLUME-5 KPWD 2021-22

Earth work excavation In ordinary/soft rock without blasting upto 1.5 m depth for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including ...

Earth work excavation Depth exceeding 1.5 m, but not exceeding 3 m for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out...

Providing and laying in position plain cement concrete Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/trap/basalt cru...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

ROOF SLAB CENTERING Appendix I Corrigendum-3 Additionalities for Formwork, Centering & Scaffolding Page No.112 KPWD. Sl.no 15 Volumn -1 KPWD SR 2023-24, .

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) inc...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Making soak pit 2.5 m diameter 3.0 m deep with 45 x 45 cm dry brick honey comb shaft with bricks and PVC S.W.R drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt ...

Water supply & Sanitary works

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

Earth work excavation In ordinary/soft rock without blasting upto 1.5 m depth for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including ...

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 600X850 mm internal ...

Supplying UPVC FOAM CORE pipes conforming to IS 16098 P-1 2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tr...

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct...

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct...

Providing and placing on terrace (at all floor levels) polyethylene

water storage tank, IS : 12701 marked, with cover and suitable locking

arrangement and making necessary holes for inlet, outlet and ...

ELECTRICAL WORK

Concealed Conduit System

Supplying heavy gauge PVC conduit pipe .mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concre...

Concealed Conduit System

Supplying heavy gauge PVC conduit pipe .mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concre...

Supplying heavy gauge PVC conduit pipe .mm dia.mm thick with suitable size bends, metal/PVC junction boxes adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and ceme...

Supplying heavy gauge PVC conduit pipe .mm dia.mm thick with suitable size bends, metal/PVC junction boxes adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and ceme...

Supplying and fixing metal fan box with round hook

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi ...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper conductor resistance single core wire in open or consealed system of wiring with specified IS- 694:201...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper conductor resistance single core wire in open or consealed system of wiring with specified IS- 694:199...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper conductor resistance single core wire in open or consealed system of wiring with specified IS- 694:199...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Sto...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Sto...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying of .feet - PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power fac...

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.

12" Sweep (300mm)

Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220 V/ 50 Hz, Rated power inpu...

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V up to 300mA sensitivity on existing wood/ panel board.

Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V up to 300mA sensitivity on existing wood/panel board.

Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equippe...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5%...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as

directed by the departmental staff"

185sqmm to 240Sqmm

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards a...

Spreading and forming with sand all round the cable to a depth of 75 mm and width of 500 mm. (Does not include cost of sand).

Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV.

Supplying and fixing L.T. cast Iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps, bolts, nuts and washers et

Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit sh...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed ...

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip

Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc

Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary lengt...

Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose w...