Erection of Overhead HT, LT line, Transformer Centre, Overhead XLPE, Maintenance of overhead HT line, LT line, Transformer Centre with dismantling of poles & transformer center including Laying, Testing & commissioning of Specially designed MVCC and other miscellaneous work under various schemes at Puna sdn (LT CRM-3) and Any other sub division under Surat rural Division.

Name of Work :-Tender for Erection of Overhead HT, LT line, Transformer Centre, Overhead XLPE, Maintenance of overhead HT line,

LT line, Transformer Centre with dismantling of poleS & transformer center including Laying,Testing & commissioning of Specially

designed MVCC and other miscellaneous work under various schemes at Puna sdn(LT CRM-3) BACK OFFICE division & any

subdivision under Surat Rural Division.

Sr. No. Item Code Item Unit FY 2024-25

HT TAPPING FROM THE EXISTING POLE INCLUDING FIXING OF CROSS ARMS, CLAMPS

ANTI-CLIMBING DEVICES, DANGER BOARD, INSULATORS ETC. COMPLETE AND PAINTING

1 9926000001 OF FABRICATED MATERIALS AND NUMBERING COMPLETE WITH COST OF PAINTS AS No.

PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND

ERECTION OF PSC POLES OF 8 *200 KG INCLUDING EXCAVATION OF PIT AND REFILLING

OF EARTH, FIXING OFCROSS ARMS, TOP FITTING CLAMPS ANTI-CLIMBING DEVICES,

2 9926000002 INSULATORS ETC. COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE No.

POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF STEEL POLES OF 9 TO 11 METERS INCLUDING EXCAVATION OF PIT AND REFILLING OF

EARTH, FIXING OFCROSS ARMS, TOP FITTING CLAMPS ANTI-CLIMBING DEVICES, DANGER BOARD, INSULATORS

3 9926000003 ETC. COMPLETE AND PAINTING OF STEEL POLE, FABRICATED MATERIALS USED ON THE POLEAND NUMBERING No.

WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND

ERECTION OF STEEL POLE OF 13 METERS FOR RAILWAY CROSSING ON BG/MG/NG LINE

FOR 0.400/11/22KV OVERHEAD LINES I.E INCLUDING EXCAVATION OF PIT & REFILLING

OF EARTH, FIXING CROSS ARMS, TOP FITTING CLAMPS,ANTI-CLIMBING DEVICES

4 9926000004 DANGER BOARD, INSULATORS ETC. COMPLETE AND PAINTING OF STEEL POLES, No.

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COSTOF PAINT

AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND

ERECTION OF DOUBLE POLE STRUCTURE OF 8 METERS 200 KG PSC POLES INCLUDING

EXCAVATION OF PITS & REFILLING OF EARTHING, FIXING OF CHANNELS, SUPPORTING

ANGLES,CLAMPS, ANTI-CLIMBING DEVICES DANGER BOARDS,INSULATORS

ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND EARTHING.(WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE OF 9 TO 11 METERS.STEEL POLE INCLUDING

EXCAVATION OF PITS & REFILLING OFEARTH, FIXING OF CHANNELS, SUPPORTING ANGLES, CLAMPS,ANTI-

6 9926000006 CLIMBING DEVICES DANGER BOARDS, INSULATORS ETC.COMPLETE & PAINTING OF POLES,FABRICATED No.

MATERIALSUSED ON THE POLES AND NUMBERING WITH COST OF PAINTSAS PER STANDARD SPECIFICATION

BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.(WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB SWITCH, HG FUSES

OF 8 MTRS 200 KG PSC POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF

EARTH,FIXING OF CHANNELS SUPPORTING ANGLES, CLAMPS, ANTI-CLIMBING DEVICES,

7 9926000007 DANGER BOARDS, INSULATORS,DOFUSES ETC. COMPLETE AND PAINTING OF No.

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COSTOF PAINT

AS PER STANDARD SPECIFICATION BUT EXCLUDINGOF ERECTION OF GUY SET AND

EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB SWITCH,HG FUSES,

TO 11 METERS STEEL POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH, FIXING OFCHANNEL,

8 9926000008 SUPPORTING ANGLES, CLAMPS, ANTI-CLIMBING DEVICES , DANGER BOARDS, INSULATORS, ETC. COMPLETE No.

AND PAINTING OF POLES FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF

PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.(WITH AB

ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING OFAB SWITCH, HG

FUSES, TRANSFORMERS, LIGHTENING ARRESTORS, DISTRIBUTION BOX. OF

METER,200KG PSC POLE METERS POLES INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF TRANSFORMERS FROMSTORES TO SITE, FIXING OF

9 9926000009 CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS ARMS CLAMPS, ANTICLIMBING No.

DEVICES DANGER BOARDS, CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND

PAINTING OF FABRICATED MATERIALS USEDON THE POLES AND NUMBERING WITH

COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF

GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB SWITCH,HG FUSES

TRANSFORMERS, LIGHTENING ARRESTORS, DISTRIBUTION BOX 9 TO 11 METERS STEEL

POLES INCLUDING EXCAVATION OF PITS & REFILLING OF EARTH CARTING OF TRANSFORMERS FROM STORE

10 9926000010 TO SITE, FIXINGOF CHANNELS SUPPORTING ANGLES, BRACING, CROSS ARMS,CLAMPS, ANTICLIMBING No.

DEVICES, DANGER BOARDS,CONDUCTOR AND CABLE WIRING ETC. COMPLETE AND PAINTING OF POLES

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTIONS OF GUY SETS AND EARTHING.

ERECTION OF GUY SET INCLUDING EXCAVATION OF PITS & REFILLING OF EARTH AS

PER STANDARD SPECIFICATION WITH STAY CLAMPS, STAY WIRE, ANCHOR ROD, TURN

BUCKLE, EYEBOLT, GUY INSULATOR, CEMENT CONCRETE BLOCK ETC. BUT EXCLUDING

CONCRETING OF POLES, GUYS, ETC. INCLUDING COST OF CEMENT SAND METAL (1:2:4)

12 9926000012 AND WATER ETC. AS PER STANDARD SPECIFICATION.(cement Should be 53 grade) used for CMT

ERECTION OF COIL TYPE EARTHING INCLUDING COST OF COAL,SALT ETC. BUT

WITHOUT COST OF GI WIRE AS PER STANDARD SPECIFICATION(20kg solt+20kg coal)

ERECTION OF GI PIPE/CI PLATE TYPE EARTHING INCLUDINGCOST OF COAL SALT ETC.

14 9926000014 BUT WITHOUT COST OF PIPE/GIPLATE GI WIRE AS PER STANDARD SPECIFICATION.(20kg No.

solt+20kg coal)

ERECTION OF STREET LIGHT FIXTURE COMPLETE WITH CLAMPS, BRASS NIPPLE,

15 9926000015 BRASS HOLDER TECK WOOD BUSH,REFLECTORS FUSE, WIRING ETC. AS PER No.

STANDARD SPECIFICATION BUT EXCLUDING COST OF MATERIALS.

STRINGING OF(30mm2)ACSR/34MM@,55MM2 AAA CONDUCTOR for ALL TYPE OF

16 9926000016 CONDUCTOR (EXCEPT DOG CONDUCTOR) FOR 11/22KV & LT LINES INCLUDING FIXING

OF INSULATORS, BINDING JUMPERING ETC.

17 9926000017 STRINGING OF GI WIRE 8 SWG INCLUDING BINDING JUMPERING ETC. DO

PROVIDING SINGLE PHASE SERVICE CONNECTION WITH PVC 2.5/4MM2 TWIN CORE

CABLE FROM TERMINAL POLE TO METERING POINT INCLUDING FIXING OF METER WITH

METER EARTHING COMPLETE WORK AS PER STANDARD SPECIFICATION BUT

EXCLUDING COST OF MATERIALS.

PROVIDING THREE PHASE 4 WIRE SERVICE CONNECTION WITH PVC 4MM2/10MM2 FOUR

CORE CABLE FROM TERMINAL POLE TO METERING POINT INCLUDING FIXING OF METER

WITH METER EARTHING COMPLETE WORK AS PER STANDARD SPECIFICATION BUT

EXCLUDING COST OF MATERIALS.

ADDITIONAL COST FOR EXCAVATION OF PIT IN HARD ROCK AREA FOR ERECTION OF

POLE/ GUY ETC. AS PER STANDARD SPECIFICATION OVER & ABOVE NORMAL COST

20 9926000020 COVERED AGAINST EXCAVATION OF PIT UNDER NORMAL SOIL FOR ERECTION OF No.

POLE,GUY, DOUBLE POLE STRUCTURE EARTHING WITH THE APPROVAL OF

SUPDT.ENGINEER.

21 9926000021 PROVIDING GUARDING TO HT LINE ON ROAD/ RAIL CROSSING. MTR

22 9926000022 PROVIDING GUARDING OF LT LINES ON ROAD/RAIL CROSSING. MTR

23 9926000023 LT LINE TAPPING- SINGLE PHASE No.

24 9926000024 LT LINE TAPPING- THREE PHASE No.

Stringing/LAYING OF OVER HEAD LT CABLE FOR ROAD CROSSING,HT LINE CROSSING

AND TELEPHONE LINE CROSSING ETC.(PER SPAN)

ERECTION OF SINGLE POLE STRUCTURES WITH , HG FUSES,TRANSFORMERS,

LIGHTENING ARRESTOR, DISTRIBUTION BOX. ON 8 METERS 200 KGAND PSC POLE

INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROM STORES TO SITE, FIXING OF CHANNELS, SUPPORTING

ANGLES,BRACINGS CROSS ARMS CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS,

CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND PAINTING OF FABRICATED

MATERIALS USED ON THE POLE AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OFGUY SETS AND EARTHING.

ERECTION OF SINGLE POLE STRUCTURES WITH MOUNTING OFAB SWITCH , HG

FUSES,TRANSFORMERS, LIGHTENINGARRESTOR, DISTRIBUTION BOX. ON 9 to

METERS RSJ POLE INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF TRANSFORMERS

27 9926000027 FROM STORES TO SITE, FIXING OF CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS ARMS CLAMPS, No.

ANTICLIMBING DEVICES DANGER BOARDS, CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLE AND NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OFGUY SETS AND EARTHING.

ERECTION OF PSC POLES OF 10 *270 KG INCLUDING EXCAVATION OF PIT AND

REFILLING OF EARTH, FIXING OF CROSS ARMS, TOP FITTING CLAMPS ANTI-CLIMBING

28 9926000028 DEVICES, INSULATORS ETC. COMPLETE AND PAINTING OF FABRICATED MATERIALS No.

USED ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE OF 10 METERS 270 KG PSC POLES

INCLUDING EXCAVATION OF PITS & REFILLING OF EARTHING, FIXING OF CHANNELS,

SUPPORTING ANGLES,CLAMPS, ANTI-CLIMBING DEVICES DANGER

29 9926000029 BOARDS,INSULATORS ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USED No.

ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING.(WITHOUT AB

STRINGING OF 100MM2 ACSR/100MM2 AAAC CONDUCTOR FOR 11/22KV & LT LINES ONE COND

INCLUDING FIXING OFINSULATORS, BINDING JUMPERING ETC. PER KM

STRINGING OF DOG CONDUCTOR FOR 11/22KV & HT LINES INCLUDING FIXING OF ONE COND

INSULATORS, BINDING JUMPERING ETC. PER KM

Sr. No. Item Code Item Unit FY 2024-25

ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING OF AB SWITCH, HG

FUSES, TRANSFORMERS, LIGHTENING ARRESTORS, DISTRIBUTION BOX. OF

METERS 270 KGAND PSC POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF

EARTH, CARTING OF TRANSFORMERS FROMSTORES TO SITE, FIXING OF CHANNELS,

32 9926000032 SUPPORTING ANGLES,BRACINGS CROSS ARMS CLAMPS, ANTI-CLIMBING No.

DEVICES,DANGER BOARDS, CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND

PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH

COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF

GUY SETS AND EARTHING.

DISMENTALLING OF 8 MTR PSC POLE WITH CREDITING OF FABRICATION AT STORE &

STACKING OF POLE SAFELY ON ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF 10 MTR PSC POLE WITH CREDITING OF FABRICATION AT STORE &

STACKING OF POLE SAFELY ON ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC POLE) (WITH TRANSFORMER)

35 9926000035 WITH CREDITING OF FABRICATION & TRANSFORMER AT STORE & STACKING OF POLE No.

SAFELY ON ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC POLE) (WITHOUT

36 9926000036 TRANSFORMER) WITH CREDITING OF FABRICATION AT STORE & STACKING OF POLE No.

SAFELY ON ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

STRINGING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN SUSPENSION / TENSION CLAMP, FIXING OF CROSS

ARM, LT SHACKLE INSULATOR ETC. FOR FIXING OF MESSENGER WIRE AND TO

PROVIDE SERVICE CONNECTION ON AERIAL BUNCH CABLE BY INSULATED PIERCEING

CONNECTORS THROUGH SERVICE CONNECTION BOX COMPLETE AS REQUIRED &

DIRECTED BY ENGINEER IN CHARGE.

STRINGING OF LT ABC OF 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM INCLUDING FITTING OF

ALL ACESSARIES I.E. SPECIAL DESIGN SUSPENSION / TENSION CLAMP, FIXING OF

38 9926000038 CROSS ARM, LT SHACKLE INSULATOR ETC. FOR FIXING OF MESSENGER WIRE AND TO KM

PROVIDE SERVICE CONNECTION ON AERIAL BUNCH CABLE BY INSULATED PIERCEING

CONNECTORS THROUGH SERVICE CONNECTION BOX COMPLETE AS REQUIRED &

DIRECTED BY ENGINEER IN CHARGE.

STRINGING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN SUSPENSION / TENSION CLAMP, FIXING OF CROSS

ARM, BINDING TO PIN INSULATOR,PREPARING SHACKLE POINT,JUMPERS ETC. AS

REQUIRED & DIRECTED BY ENGINEER IN CHARGE

STRINGING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN SUSPENSION / TENSION CLAMP, FIXING OF CROSS

ARM, BINDING TO PIN INSULATOR,PREPARING SHACKLE POINT,JUMPERS ETC. AS

REQUIRED AND DIRECTED BY ENGINEER IN CHARGE

Sr. No. Item Code Item Unit FY 2024-25

STRINGING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM INCLUDING FITTING OF

ALL ACESSARIES I.E. SPECIAL DESIGN SUSPENSION / TENSION CLAMP, FIXING OF

CROSS ARM, LT SHACKLE INSULATOR ETC. FOR FIXING OF MESSENGER WIRE AND TO

PROVIDE SERVICE CONNECTION ON AERIAL BUNCH CABLE BY INSULATED PIERCEING

CONNECTORS THROUGH SERVICE CONNECTION BOX COMPLETE AS REQUIRED &

DIRECTED BY ENGINEER IN CHARGE.

DISMENTALING OF RSJ (9/11 METER) POLE AND CREDITING THE OLD MATERIAL TO

DISMENTALING OF TRANSFORMER CENTER ON 10MTR,270KG PSC POLE(WITHOUT

43 9926000043 TRANSFORMER) WITH CREDITING OF FABRICATION AT STORE AND STACKING OF POLE No.

SAFELY ON ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTALING OF TRANSFORMER CENTER ON 10MTR,270KG PSC POLE(WITH

44 9926000044 TRANSFORMER) WITH CREDITING OF FABRICATION AT STORE AND STACKING OF POLE No.

SAFELY ON ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTLING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM AND CREDITING FITTING OF ALL

ACESSARIES AND FABRICATION TO DEPARTMENTAL STORE

DISMENTLING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM AND CREDITING FITTING OF

ALL ACESSARIES AND FABRICATION TO DEPARTMENTAL STORE

DISMENTALING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM AND CREDITING FITTING OF

ALL ACESSARIES TO DEPARTMENTAL STORE.

DISMENTALING OF LT ABC OF 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM AND CREDITING

FITTING OF ALL ACESSARIES TO DEPARTMENTAL STORE.

DISMENTALING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM AND CREDITING

FITTING OF ALL ACESSARIES TO DEPARTMENTAL STORE.

RESTRINGING OF ALL TYPE OF CONDUCTOR (EXCEPT DOG CONDUCTOR) FOR 11/22KV ONE COND

& LT LINES INCLUDING FIXING OF INSULATORS, BINDING JUMPERING ETC. PER KM

RESTRINGING OF DOG CONDUCTOR FOR 11/22KV HT LINES INCLUDING , BINDING ONE COND

JUMPERING ETC. PER KM

LABOUR CHARGE FOR THE INSTALLATION OF NEW DTR METER. (METER WILL BE

PROVIDED BY DGVCL)

LABOUR CHARGE FOR THE REPLACEMENT OF DTR METER AND OLD METER SHOULD

BE CREDITED TO SDN STORE. (METER WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR PROVIDING CT COIL FOR DTR METER CONNECTION. (CT COIL

WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR REPLACEMENT OF CT COIL FOR DTR METER CONNECTION AND

55 9926000055 OLD CT SHOULD BE CREDITED TO SDN STORE. (CT COIL WILL BE PROVIDED BY PER CT

LABOUR CHARGE FOR FIXING OF MMB FOR DTR METER (MMB WILL BE PROVIDED BY

LABOUR CHARGE FOR REPLACEMENT OF DTR METER BOX. (METER WILL BE

PROVIDED BY DGVCL)

PROVIDING / REPLACEMENT OF 1.5 SQ MM 10 CORE COPPER CABLE 3.5 METER (CABLE

TO BE PROVIDED BY AGENCY)

LABOUR CHARGE FOR PROVIDING/RECONNECTION OF TERMINAL CONNECTION WITH

59 9926000059 TERMINATIO

PROPER SIZE OF LUGS. (LUGS COST IS BORNE BY AGENCY)

LABOUR CHARGE FOR THE SPOT READING OF DTR METER WITH DETAIL SURVEY OF

DEFECT IF ANY. A DULY SIGN COPY BY SURVEYOR PERSON OF AGENCY IN PRO-FORMA

60 9926000060 REPORT SHOULD BE SUBMITTED TO SDN OFFICE.(* ONLY IF ALL PARAMETER OF PER DTR

VOLTAGE, CURRENT & LOAD AS SHOWN IN PER-FORMA IS FILLED) AS PER THE

INSTRUCTION OF ENGINEER IN-CHARGE.

LABOUR CHARGE FOR THE SPOT READING OF DTR METER WITH DETAIL SURVEY OF

DEFECT IF ANY. A DULY SIGN COPY BY SURVEYOR PERSON OF AGENCY IN PRO-FORMA

REPORT SHOULD BE SUBMITTED TO SDN OFFICE. (DULY FILL PER-FORMA IN FAULT

CONDITION IN WHICH READING PARAMETER IS NOT SHOWN IN METER)

INSTALLATION OF DTR METER INCLUDING METER BOX, PROVIDING & FIXING OF 1.5SQ

62 9926000062 MM SINGLE STRAND 10 CORE ARMOURED COPPER CABLE (3.5METER), TERMINATION IN No.

METER & COIL ETC.(METER, METER BOX, C.T./P.T. COIL WILL BE PROVIDED BY DGVCL)

INSTALLATION OF DTR METER INCLUDING METER BOX, TERMINATION IN METER & COIL

63 9926000063 ETC. (WITHOUT 10CORE COPPER CABLE) (METER, METER BOX, C.T./P.T. COIL WILL BE No.

PROVIDED BY DGVCL)

Binding of messanger Conductorat with a distance not more than 0.75 mtr with 6 turns minimum

on XLPE Cable with single strand binding wire (including cost of binding wire)

Supply and Installation of 11/22 kV Distribution Transformers HT Terminal protector (UV

Resistance) with using 95/120/150 sq.mm long barrel aluminum lug. (1Set = 3 Nos i.e. on R, Y, B)

Supply & Installation of HT EPR Tap on 11/22 kV Distribution Transformer with replacement of

bare conductor by HT ABC conductor (DO bottom side to transformer) after removal of semi

conductor by HT ABC (6 inch both side). HT ABC to be supplied by DGVCL. (1Set = 3 Nos i.e. on

Supply, Installation, Testing and Commissioning of Maintenance Free, Ready Capsule, Pipe-In-

67 9926000088 Cage (Pic) Type, Earth Electrodes for HT Feeder Pole Having 2000 mm Electrode Length as per NO

the Tender Specifications and Drawing. (All Materials Will Be Supplied By Agency)

Supply, Installation, Testing and Commissioning of Maintenance Free, Ready Capsule, Pipe-In-

68 9926000089 Cage (Pic) Type, Earth Electrodes for HT Feeder Pole Having 3000 mm Electrode Length as per NO

the Tender Specifications And Drawing. (All Materials Will Be Supplied By Agency)

Supply and Installation of 25 X 3 mm GI Strip having hot dip- galvanized-zinc coating of 80-100

microns without any joints or welding. Both the end of the GI strip should be connected with GI nut

bolts and required fabrication work for giving separate earthing connections to

(1) Neutral of the transformer

(2) MS structures of the transformer center (Approximately 25 meter GI strip per transformer

- as per requirement and instruction of Engineer in- charge) (All Materials will be supplied by

Supply and Installation of uPVC standard make Pipe of 1.25" diameter for covering GI strip with

UV protected Cable Ties of 550 X 7.6 mm size to bind with pole face(Approximately 25 meter

uPVC pipe for GI strip covering per transformer centre -as per requirement and instruction of

Engineer in-charge.

Supply & fixing of upto 33 kV Conductor sleeve for Busbar to Drop out Fuse and Drop out fuse to

71 9926000093 Transformer H.T. including Busbar (12 mm sleeve) as per technical specification. (All Materials will Per TC

be supplied by Agency)

Supply & fixing of upto 33 kV Conductor sleeve for Busbar to Drop out Fuse and Drop out fuse to

72 9926000100 Transformer H.T. without Busbar (12 mm sleeve) as per technical specification. (All Materials will Per TC

be supplied by Agency)

Supply & fixing of upto 33 kV Conductor sleev for Bus bar to Drop out Fuse and Drop out fuse to

73 9926000094 Transformer H.T.including Busba r(15mmsleev) as per technical specification. (All Materials will be Per TC

supplied by Agency)

Supply & fixing of upto 33 kV Conductor sleeve for Busbar to Drop out Fuse and Drop out fuse to

74 9926000101 Transformer H.T. without Busbar(15 mm sleeve) as per technical specification. (All Materials will Per TC

be supplied by Agency)

Supply & fixing of Disc type Red Color FRP(Non-flammable) material with Weather resistant, Non-

75 9926000095 conductive bird guard OD=300 MM, ID=33 MM, Width =1.25 MM, one NO

side cut from ID to OD. (All Materials will be supplied by Agency)

Providing and fixing of LT Terminal protectors i.e. Re-useable boot (LT Side 1.1 Kv) including LT

76 9926000096 (1.1 kV) insulating taps. All live part at LT side shall be covered with fixing NO

of LT insulating taps.

77 Nylon Net around Transformer Center

77.1 9926000097 Nylon Net (12 * 15 ft) Per Net

77.2 9926000098 Nylon Dori Per TC

Labour charge for fitting Nylon Net (All fabricated material for fitting nylon net shall be provided by

78 9924000001 Cutting of Tree branches surounding HT/LT line Per Tree

Replacement of old jumpers & providing new double jumpers with 8" binding [D Type] & capsuling

with PVC pipe etc

80 9924000005 Support pole for Stay PSC/STP/RSJ No.

81 9924000006 Pin binding of conductor 11/22kv Pin insulator No.

82 9924000007 Pin binding of conductor 11/22kv Pin insulator per pole in costle area with cleaning . No.

83 9924000008 Pin binding of conductor LT shakel insulator No.

84 9924000009 Replacement of one/both disc.insulator at strain pole No.

85 9924000010 Replacement of LT shackle insulator at cut point No.

86 9924000011 Refixing of V cross Arm No.

87 9924000012 Replacement of V cross Arm (With Transportation & Painting) No.

88 9924000013 Refixing of Top fitting in proper position No.

89 9924000014 Replacement of Top fitting No.

90 9924000015 Replacement of LT cross Arm No.

91 9924000016 Providing DO fuse on DP with carting & jumpuring(ONE DO FUSE) No.

Numburing of pole with paint by preparing back ground of one colour and have lettering(height 3" *

width 0.5") using stensil

93 9924000018 Fixing of MMB(1PH.) at consumer end No.

94 9924000019 Fixing of MMB(3PH.) at consumer end No. 1283 of

Sr. No. Item Code Item Unit FY 2024-25

95 9924000020 Replacement of (1ph.) meter for Urban area No.

96 9924000021 Replacement of (1ph.) meter for Rural area No.

97 9924000022 painting consumer no. on MMB (Urban) (with letter size height 40mm* width 8mm) No.

98 9924000023 painting consumer no. on MMB (Rural) (with letter size height 40mm* width 8mm) No.

99 9924000024 Replacement of deteriorated Single phase Service line No.

100 9924000025 Fixing of new dist. Box with complete wiring including clamps,nut bolts etc. No.

101 9924000026 Reparing of guarding involving reshaping of bearer wire cross lacing binding etc. R Mtr.

102 9924000027 Painting of steel fabricated material of RSJ DO DP structure with paint No.

Painting of steel fabricated material of RSJ pole mounted transformer double pole structure with

104 9924000029 Painting of steel fabricated material of RSJ single pole with paint No.

105 9924000030 painting of steel fabricated material of PSC Single pole (HT line) with paint No.

106 9924000031 painting of steel fabricated material of PSC DO DP double pole with paint No.

107 9924000032 painting of steel fabricated material of PSC double pole at pole mounted transformer with paint No.

108 9924000033 Providing line seperater single phase No.

109 9924000034 Providing line seperater three phase No.

110 9924000035 Replacement / Providing of stay insulator along with adjustment of tension in stay wire No.

Replacement of deteriorated /providing LT dist. Box with new up to 100KVA capacity & crediting it

Replacement of deteriorated /providing LT dist. Box with new above 100KVA capacity & crediting

113 9924000038 Adjustment of tension in stay wire No.

114 9924000039 Refitting of LA No.

115 9924000040 Converting pin point to Shackle point including dismentaling & restringing etc. location

116 9924000041 replacement of 11KV Pin insulator with providing new double pin binding No.

replacement of 22KV Pin insulator by new 11kv pin insulator with spares & providing new double

118 9924000043 Providing 11kv double disc insulators with binding & restringing No.

119 9924000045 Replacement of existing 11kv conductor (all size) with new double pin binding Cond/KM

120 9924000046 Plumbing of PSC Pole with straightening at pin point No.

121 9924000047 Plumbing of PSC Pole with straightening at tension point No.

122 9924000048 Plumbing of tilted DP structure (PSC/RSJ/STP) with refilling of stone Murrum etc. No.

Providing new 11kv AB /GO switch with fabrication and insulated colour code jumper, binding,

124 9924000051 Replacement of old 11kv AB /GO switch with providing new insulated jumper, binding, lugs etc Set

125 9924000052 Providing cage type loop guard in verticle LT line with using PVC reel insulators etc per pole

Labour charges for replacement /providing of MMB & service with all accessories for three phase

Labour charges for replacement /providing of MMB & service with all accessories for single phase

Dismentalling of existing Dist.X'mer center(RSJ /STP POLE) 25/63/100/200 KVA with all

fabrication & creditig the old material to store

Disconnection from LT pole 1 phase

Reconnection from LT pole 1 phase

( payment after receipt of R/C charges)

Disconnection from LT pole 3 phase

Reconnection from LT pole 3 phase

( payment after receipt of R/C charges)

133 9924000060 Dismentaling & removing of service line from pole & crediting to S/dn (1 ph.) No.

134 9924000061 Dismentaling & removing of service line from pole & crediting to S/dn (3 ph.) No.

135 9924000062 Reconnection of service line complete with PVC cable (1 Ph) No.

136 9924000063 Reconnection of service line complete with PVC cable (3 Ph) No.

Providing spiral type earthing by G.I. NO 8(weight 2kg -5mtr in length) with salt and coal 10kg

137 9924000064 each, including pvc rigid pipe 20mm dia( 1.5mtr length) to pass exposed part of G.I. wire at No.

consumer end with all materials, earth resistance should be less than 2 ohms

Providing and fixing of signle core 1.5 sq mm single strand copper insulated cable with cable nail

clip for spiral type earthing at consumer end. The end of G.I. no 8 is to be connected by connector

138 9924000070 with copper cable of which other end shall be connected to the earth terminal of meter box. This per meter

item shall be used in location where there is more distance between earth terminal and earthing

terminal of meter. (All materials supplied by contractor)

Stringing of LT ABC of 1*35 SQ MM + 1*25 SQ MM including fitting of all acessaries i.e. special

design suspension / tension clamp, fixing of cross arm, LT shackle insulator etc. for fixing of

messenger wire and inclusive of dismantling charge of existing bare conductor and crediting in to

store & dismentaling of service line from LT bare conductor and to provide service connection on

Aerial Bunch Cable by insulated pierceing connectors through service connection box complete as

required & directed by Engineer in Charge.

Stringing of LT ABC of 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM including fitting of all acessaries

i.e. special design suspension / tension clamp, fixing of cross arm, LT shackle insulator etc. for

fixing of messenger wire and inclusive of dismantling charge of existing bare conductor and

crediting in to store & dismentaling of service line from LT bare conductor and to provide service

connection on Aerial Bunch Cable by insulated pierceing connectors through service connection

box complete as required & directed by Engineer in Charge.

Stringing of 11KV ABC of 3*95 SQ MM +80 SQ MM including fitting of all acessaries i.e. special

design suspension / tension clamp, fixing of cross arm, binding to pin insulator,preparing shackle

point,jumpers etc. and inclusive of dismantling charge of existing bare conductor and crediting in to

store complete as required & directed by Engineer in Charge

Stringing of 22 KV ABC OF 3*70 SQ MM +95 SQ MM including fitting of all acessaries i.e. special

design suspension / tension clamp, fixing of cross arm, binding to pin insulator,preparing shackle

point,jumpers etc. and inclusive of dismantling charge of existing bare conductor and crediting in to

store complete as required & directed by Engineer in Charge

Stringing of LT ABC of 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM including fitting of all acessaries

i.e. special design suspension / tension clamp, fixing of cross arm, LT shackle insulator etc. for

fixing of messenger wire and inclusive of dismantling charge of existing bare conductor and

crediting in to store & dismentaling of service line from LT bare conductor and to provide service

connection on Aerial Bunch Cable by insulated pierceing connectors through service connection

box complete as required & directed by Engineer in Charge.

Erection of D.P. (double pole) structure using 9 / 11 Mtr. RSJ pole with cable connection

144 9925000010 arrangement along with fitting of necessary fabrication for 11KV cable including excavation of pit & No.

refilling of earth as per instruction of EIC. (Exclusive of concreting & muffing of poles)

Erection of Single pole structure using 9 / 11 Mtr RSJ pole with cable connection arrangement

145 9925000011 along with fitting ofnecessary fabrication for 11KV/22 KV cable including excavation of pit & refilling No.

of earth as per instruction of EIC. (Exclusive of concreting & muffing of poles)

Erection of D.P. (double pole) structure using 8.0 Mtr. PSC pole with cable connection

146 9925000012 arrangement along with fitting of necessary fabrication for 11KV cable including excavation of pit & No.

refilling of earth as per instruction of EIC. (Exclusive of concreting & muffing of poles)

Erection of Single pole structure using 8.0 Mtr PSC pole with cable connection arrangement along

147 9925000013 with fitting ofnecessary fabrication for 11KV/22 KV cable including excavation of pit & refilling of No.

earth as per instruction of EIC. (Exclusive of concreting & muffing of poles)

Labour charge for erecting of 11kV / 22 kV XLPE cable of size up to 240 mm

148 9925000014 on DP Structure with fixing of 02 Nos polymer cleats on top and middle Per Job

part.Polymer cleats, nut bolts etc. fixing material to be provided by contractor.

Providing & fixing of 6.11kg/cm2 , class-4,Green color, 110mm O.D. , 8.5mm thickness H.D.P.E.

pipe confirms to IS 4984 and BIS certification on the erected DP structure for the mechanical

protection of cable by inserting the cable inside HDPE pipe. The HDPE pipe shall be erected in

such a way that 300mm shall be below the ground level and the rest 2700 mm shall be

supported on the DP Structure with 01 No Polymer cleat.All materials including polymer cleat

and Nut bolt to be provided by contractor.

Providing and fixing of pipe type earthing from 80 mm dia class-B GI pipe with pit to be filled with

salt & coke and construction of chamber as per DGVCL Drg. No. dg /100 for DP and cable. The

earthing pit should be joined with cable by G.I. strip of size 1” width & 2 mm thick. All material GI

pipe, Coke, Salt etc will be supplied by bidder.

Supply & fixing of heat shrink type end terminations (outdoor) for upto 11kV 3C x

mm size XLPE cable as per DGVCL technical specification

Supply & fixing of heat & shrinkable end terminations (outdoor) for upto 22 kV 3C x

mm2 size XLPE cable as per DGVCL technical specification)

Sr. No. Item Code Item Unit FY 2024-25

153 9925000019 Supply & fixing of heat shrink type end terminations (indoor) for upto 11kV 3C x 185 mm No.

size XLPE cable as per DGVCL technical specification)

Supply & fixing of heat & shrinkable end terminations (indoor) for upto 22 kV 3C x

mm size XLPE cable as per DGVCL technical specification

155 9925000021 Supply & fixing of heat shrinkable straight through joint for upto 11kV 3C x 185 mm size No.

XLPE cableas per DGVCL technical specification.

156 9925000022 Supply & fixing of heat shrinkable straight through joint type for upto 22kV 3C x 185 mm No.

size XLPE cable as per DGVCL technical specification

Labour charge for excavation of 2100mm long x 1200mm wide x 1200 mm deep joint pits for

installation of 11kV / 22kV Straight through joints as per instruction of engineer-in-charge &

covering the cable with 150 mm dia (Outer), thickness 25 mm, 1.0 meter long RCC half round

muffs & refilling same as per instruction of EIC .

Providing and fixing of insulating bus bar, made from 11KV/22KV XLPE cable after removal of

semi conducting layer and applying of PVC heat shrinkable anti-tracking core insulating tubing

(1.1KV), on both end terminal using Aluminium long barrel heavy duty up to 240 sq mm lugs,

158 9925000024 Aluminium bus connector. Taping with PG- clamp for bus conductor as per drawing and as per No.

instruction of EIC. The Alluminium lugs and PG clamp shall be covered with 11KV/22KV HT

insulating tapes.(11KV/22KV XLPE cable will be in scope of DGVCL while all other materials will

be in bidder's scope)

Testing of cable at various points and commissioning the feeder as per instruction of engineer-in-

charge.Test result shall be submitted by contractor with bill.

Preparation and submission of 6 (six) copies, of complete layout drawings with GIS mapping as

160 9925000026 per actual cable routing showing road crossing, HDPE pipe sleeving, jointing locations, markers Set

Providing & fixing of aluminium tag of size 250 mm (L) x 75 mm (W) from 3 mm aluminium sheet

along with 1.0 mm dia aluminium binding wire for fixing of aluminium tag near end termination joint

161 9925000029 at DP structure for identifyng the cable. The details of feeder i.e. 11 / 22 KV with feeder name No.

shound be punched on the tag by letter punch of size 16 mm as per instruction of In-charge

Modifications e.g.Providing and fixing of Terminal protectors i.e. Re-use able boot (HT Side

11/22KV, LT Side 1.1KV) including 11/22 KV insulating taps and L.T.(1.1 KV) insulating taps

,Busbar, Tapping from Bus Bar (11/22 KV XLPE cable) through P.G. Clamp for H.T. Jumper to

D.O. Fuse to bushings of Transformer Center, providing & Fixing of jumper and providing & fixing

of Heat Shrinkable Anti Tracking Core Insulating Tubing (Insulation Level 11/22 KV) in H.T. jumper

, Clamping arrangement of cable support frame on both side of existing Over Head type

Distribution Transformer to utilize in Under Ground cable network as per drawing & as per

instruction of Engineer incharge. All live parts i.e. PG-Clamp, connections of D.O.fuses, HT

bushings etc . shall be covered with fixinng of 11/22 KV HT insulating tapes. ( 11/22 KV XLPE

cable will be in scope of DGVCL while all other materials will be in bidder's scope ) .

163 9925000047 Laying of any size of 11/ 22 KV XLPE /PILC Cable in redaymade trench or in open space

164 9925000060 Labour charges for Lying of O/H XLPE cable pole to pole KM

165 9925000064 Supply of 150 mm dia (Inner), thickness 25 mm, 1.0 meter long RCC half round pipe No.

166 Dismental OF 100MM2 AAAC CONDUCTOR KM

167 Supply and fixing of Suspenssion clamp to Hold the cable (J-Hook) NO

Model:ETP/HDR/17/2

168.1 Terminal Size: 25mmX 6mm Length: 2 Mtr NO

With clamp & 2 no’sof M10 size SS nut & terminal to T/C neutral separately

using Bolts with connection of earthling 25X 3mm Hot Dip GI strip(per

Transformer/ Earthling 04 Mtr GI patti)Installation of Earthling PIT ,work

includes supply and

labour for connectionall respect.

Ground Conductivity

Improve Material,

168.2 Hydrolyte Net NO

Providing and fixing Green HDPE pipe ,size 160 mm Dia X 5 mm thickness X 7 feet height . & GI

169 clamp size 25 X 3 mm (1 Round clamp & 2 Nos C -type Clamp with GI bolts – nuts (10 nos.) NO

Danger sign sticker with toll free number of DGVCL embossed

Laying,Testing & commissioning of Specially designed 11 KV AL-59 ACS Medium Voltage

Covered conductor as per the technical specifications (with accessories)

Laying,Testing & commissioning of Specially designed 11 KV 55mm2 AAAC Medium Voltage

Covered conductor as per the technical specifications (with accessories)

1.DGVCL will provide key material like M.S. materials,ABC/Bare conductors,PSC/RSJ

Poles,Insulators,Fabricated

materials etc. to the contractor.

2.All fabricated items shall be fabricated as per DGVCL approved drawing and by welding rods confirming to

the relevent ISI specification and as directed by Engineer in charge.

3.Necessary electricity connection for fabrication items shall be provided by DGVCL on payment of required

charge for connection & electricity bill of the same shall be paid by the agency.

4.All the rates are inclusive of PF & Exclusive of GST applicable time to time.

5.All steel material are to be painted as below:

(a) Scrubbing of rusted surface properly before applying the paints on to the RSJ poles & steel fabricated

materials of RSJ/PSC poles is must required.

(b) Two coats of approved ISI mark red oxide (primer) is to be properly painted for the RSJ poles & steel

fabricated materials of RSJ/PSC poles.

(c) Two coats of approved ISI mark silver paint (i.e. triple mangoes or equivalent quality silver paint) is to be

properly painted on to the RSJ poles & steel fabricated materials of RSJ/PSC poles.

6.BidderwillhavetoprovideastickeronHDPEPIPEatcablerisinglocationdescribingrouteofcableasperinstructionofEn

gineerIn-charge.

DGVCL,Surat Rural Division