Drilling of bore hole and fitting of new submersible pump in city area of Jamnagar under SJMMSVY Grant

Name of Work::- Drilling of bore hole and fitting of new submersible pump in city area of

Jamnagar under SJMMSVY Grant

Description Unit Rate

Drilling of bore hole 165 mm dia meter by DTH Rig in any type of

all strata. Without GST

1) 0 to 150 meter Rmt

2) 151 to 225 meter Rmt

3) 226 to 300 meter Rmt

Drilling of 200/215 MM Dia bore hole in over burden rocky or

loose collapsible / boulder strata & lowering of 175/200 MM dia

UPVC/PVC/ERW casing pipe with required depth by DTH ring

etc. complete. strata .Without GST

Providing and supplying in standard length ISI mark rigid

unplasticised PVC Casing including all local and central taxes,

3 transportation, freight charges, octroi, inspection charges, loading,

unloading, conveyance to the departmental stores etc. complete.

Providing and fitting iron cap-plug with nuts-bolts & lock nuts of

std. make complete. Without GST

150 mm dia pipe No.

200 mm dia pipe No.

Single phase Bore well sub pump motor set with required capacity

5 DOL Starter MOC : Casing : CI-FG260, Impeller : Bronze & Shaft

: SS : 410 with Electronics Starter Without GST

HP Head Discharge

S.I.T.C. of single phase submersible pump set suitable for 100 mm size

6 or more dia bore well having motor capacity and discharge as under with

necessary panel box. Lifting and Lowering taken extra. Without GST

(a) Motor rating 1 HP (12 stage) pump having capacity of 50 LPM at

to 45 mtr head suitable for 32 mm dia. delivery pipe

Note:- Add or less Rs. 450/- for Additional / Less Stage

Bore well submersible pump set conforming to I.S. 8034 and motor

conforms to IS-9283 working at 3 phase 400/440 volt 50 C/S A.C.

supply & 2900 R.P.M. MOC : Casing : CI/SS, Impeller : Bronze &

Shaft : SS : 410 Without GST

HP Discharge In LPM

S.I.T.C. submersible pump set suitable for bore of 100 mm. dia. or more

having three phase motor capacity not more than 3 H.P. of different

range with following capacity. Lifting and Lowering taken extra.

(C) (12 stage) 130 LPM discharge at 54 mtrs. Respectively head suitable

for 50 mm dia. delivery pipe

Note:- Add or less Rs. 500/- for Additional / Less Stage

S.I.T.C. submersible pump set suitable for bore of 150 mm. dia. or more

9 having three phase motor capacity not more than 5 H.P. with following

capacity. Lifting and Lowering taken extra. Without GST

(A) (8 stage) 240 to 200 LPM discharge at 70 to 78 mtrs. head

respectively suitable for 50mm dia. delivery pipe

(B) (5 stage) 410 to 350 LPM discharge at 40 to 36 mtrs. head

respectively suitable for 50mm dia. delivery pipe

Note:- Add or less Rs. 600/- for Additional / Less Stage

DOL / Star Delta Starter suitable for local & remote pump control

application consisting of MPCB, overload relay and contactors as

10 per type II coordination including digital voltmeter, analogue

ammeter with selector switch, run hour meter, required protective

relays & control accessories. Without GST

d) S.D. from 8 to 10 HP No.

e) S.D. from 11 to 15 HP No.

Supplying and fitting of PVC insulated flat submersible cable ISI

mark related to submersible pump set. Without GST

A) 1R x 3C x 1.5 mm2 Rmt

B) 1R x 3C x 2.5 mm2 Rmt

C) 1R x 3C x 4.0 mm2 Rmt

D) 1R x 3C x 6.0 mm2 Rmt

Manufacture, supply and delivery of following ISI marked

H.D.P.E. pipes (IS: 4984/1985 with latest amendment) having

material grade PE-80 in approximate 100 mtr. Coil length or as per

GWSSB requirement with SS-316 Nipple at both end having

TPI threading as per specification, press fitted and bolted having

nominal diameter as under as per detailed technical specification.

Rates are based on IOCL resin A grade 45 GP 004DP44 as on

dated 01.12.2017 etc. complete. Without GST

i) DN 32 PN-10 Rmt

ii) DN 40 PN-10 Rmt

iii) DN 50 PN-10 Rmt

iv) DN 63 PN-10 Rmt

v) DN 63 PN-12.5 Rmt

Providing and laying cement concrete foundation size 1.20m.x

1.20m.x0.30m with cement concrete 1:1:5:3. Without GST

14 Dismantling of existing bore hole foundation. Without GST No

Construction of brick masonry chamber internal size 45x45x45 cm

with excavation and providing 15cm thick cement concrete 1:2:4

in bottom, with IPS and 40 mm thick brick masonry 23cm thick in

cement mortar1:5, sand faced plaster in cement mortar 1:3 and

fitting Iron cover made from 5mm steel M.S. Plate with fixing

50mm x50mmx5mm Iron angle with hinges necessary locking

arrangement and cable and H.D.P.E pipe hole arrangement etc

Providing laying and Jointing in true line and level 15 mm dia

U.P.V.C. Pipe (SCH-40) For Cold water including fitting make

PRINCE/SUPREME/ASTAL/FINOLEX or equivalent as approved

by Engineer in charge. pipe shall be fixed on the wall with the help

of clamp at every two meter C/C or shall be concealed as directed

including necessary fittings etc including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

Providing laying and Jointing in true line and level 25 mm dia

U.P.V.C. Pipe (SCH-40) For Cold water including fitting make

PRINCE/SUPREME/ASTAL/FINOLEX or equivalent as approved

by Engineer in charge. pipe shall be fixed on the wall with the help

of clamp at every two meter C/C or shall be concealed as directed

including necessary fittings etc including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

Providing and fixing screw down bib taps of following size.(A)

Brass screw down bibi tap polished bright. (II) 15mm dia

Point wiring for Individual PLUG with following size mains earth

wire of 1.5 Sq.mm (Green) both are of ISI marked 1.1 KV grade

FRIS PVC insulated multistrand copper wires in concealed

19 in/flushed on wall/ceiling complete with ISI marked 3/5 Pin socket Pt.

and tissino type switch erected with earth continuity connection

erected on metal/pvc box covered with 3mm thick

PC(Polycarbonate)/acrylic sheet

Lowering of submersible motor pump set complete with required

Nos and size of casing pipes erected by means of proper chain

pulley block and pipe wrenches after checking of threads of each

pipe with coupling to take the load of the pump set and pipes

assembly filled up with water.

A) Up to 60 meter Per Job

B) Above 60 meter and up to 120 meter Per Job

C) Above 120 meter Per Job

I/We are willing to carryout the above work ar ...........................% Above/Below, in word

_______________________________ Percent Above/Below, the tender rte which are mentione above

BIDDER SIGNED AND SEAL Executive Enginner