8748 REPAIR, MAINTENANCE OF ELECTRICAL WIRING AND INTERNAL FIXTURES AT VARIOUS LOCATIONS OF SMQ, OMQ AND TECH AREA ALONG WITH OTHER MISCELLANEOUS ITEMS AT AF STATION, BAREILLY

Amount

Taking down carefully aluminum/ copper point wiring for light, fan, socket or power point etc. complete including conduit, fittings and fixtures such as ceiling rose, switch socket, pendants etc. including making good surface of wall, ceiling etc. complete all as specified.

M&L for Point wiring complete as specified with 1100 volt grade 1.5sq.mm. (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade (IS:694) drawn through and including rigid non-metallic PVC conduit of suitable size not less than 20mm dia, with all fittings, concealed in wall/ roof / floor including pressed steel concealed terminal boxes of required size with top cover of 3 mm thick of plastic laminated sheet of required colour suitable for housing switches/ sockets/ regulators etc. duly earthed with same cable as for wiring above but green in colour as continuous earthing wire complete all as specified for one light/ fan/ bell point controlled by one switch 6 Amps 1 way. [Note:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.]

All as per Item No. 2 herein before but for one 3 pin 6 Amp socket out let point on independent board.

All as per Item No. 2 herein before but for one 3 pin 6 Amp socket out let point on same board with other switches.

All as per item No. 3 herein before but point wiring with 1100 volt grade 2.5sq.mm. (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade (IS:694) duly earthed with same cable as for wiring above but green in colour as continuous earthing wire suitable for one 3 pin 16 Amps socket out let on independent board.

M&L for Point wiring complete as specified with 1100 volt grade 1.5sq.mm. (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade (IS:694) drawn through existing rigid non-metallic PVC conduit, concealed in wall/ roof / floor including pressed steel concealed terminal boxes of required size with top cover of 3 mm thick of plastic laminated sheet of required colour suitable for housing switches/ sockets/ regulators etc. duly earthed with same cable as for wiring above but green in colour as continuous earthing wire complete all as specified for one light/ fan/ bell point controlled by one switch 6 Amps 1 way.

All as per Item No. 6 herein before but for one 3 pin 6 Amp socket out let point on independent board.

All as per Item No. 6 herein before but for one 3 pin 6 Amp socket out let point on same board with other switches.

All as per item No. 6 herein before but point wiring with 1100 volt grade 2.5sq.mm. (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade (IS:694) duly earthed with same cable as for wiring above but green in colour as continuous earthing wire suitable for one 3 pin 16 Amps socket out let on independent board.

M&L for Point wiring complete as specified with 1100 volt grade 1.5sq.mm. (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade (IS:694) drawn through and including rigid non-metallic PVC concealed conduit of suitable size not less than 20mm dia, with all fittings, concealed in wall/ roof / floor including decorative modular cover plates (inner and outer) suitable for housing modular pattern switches/ sockets/ regulators etc. along with necessary metal boxes flush mounting in the wall duly earthed with same cable as for wiring above but green in colour as continuous earthing wire complete all as specified for one light/ fan/ bell point controlled by one switch 6 Amps 1 way. [Note:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.]

All as per Item No. 10 herein before but for one 3 pin 6 Amp socket out let point on independent board.

All as per Item No. 10 herein before but for one 3 pin 6 Amp socket out let point on same board with other switches.

All as per item No. 10 herein before but point wiring with 1100 volt grade 2.5sq.mm. (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade (IS:694) duly earthed with same cable as for wiring above but green in colour as continuous earthing wire suitable for one 3 pin 16 Amps socket out let on independent board.

M&L for flame proof wiring with single core PVC insulated and unsheathed 1100 Volts grade (ZHFR) Zero Halogen Flame Retardant Smoke Free Non-Toxic Non-Corrosive Electric Cable with multi stranded copper conductor of size 1.5 Sq.mm phase and neutral drawn in and including ERW rigid steel stove enameled black conduit heavy duty ISI marked of size 20mm dia surface type including all flame proof conduit fittings and accessories such as tees, junction boxes, bends, duly tested by CMRI Dhanbad, duly earthed with same cable as for wiring above but green in colour as continuous earthing wire connected to earth dolly complete all as specified and directed by Engineer-in-Charge for one light/ fan point controlled by one flame proof rotary switch SP one way.

All as per Item No. 14 herein before but for one 3 pin 6 Amp socket out let point on independent board.

M&L for flame proof wiring with single core PVC insulated and unsheathed 1100 Volts grade (ZHFR) Zero Halogen Flame Retardant Smoke Free Non-Toxic Non-Corrosive Electric Cable with multi stranded copper conductor of size 2.5 Sq.mm phase and neutral drawn in and including ERW rigid steel stove enameled black conduit heavy duty ISI marked of size 20mm dia surface type including all flame proof conduit fittings and accessories such as tees, junction boxes, bends, duly tested by CMRI Dhanbad, duly earthed with same cable as for wiring above but green in colour as continuous earthing wire connected to earth dolly complete all as specified and directed by Engineer-in-Charge for one 3 pin 15/ 25 Amps socket outlet point on independent board

S&F Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16 Amp, 250V, 2P + earth complete all as specified and directed including taking down existing unserviceable socket. [Make:- Sudhir/ Baliga/ Shyam/ Bajaj].

S&F Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 25 Amp, 250V, 2P + earth complete all as specified and directed including taking down existing unserviceable socket. [Make:- Sudhir/ Baliga/ Shyam/ Bajaj].

S&F Flame proof, weather proof direct entry type rotary switch with cable terminal box in cast aluminum alloy LM-6 enclosure epoxy powder coated single pole 230 volts 16 Amp ON / OFF switch AC certified by CRMI for group II-A & II-B including compression glands complete all as specified and directed including taking down existing unserviceable switch. [Make:- Sudhir/ Baliga/ Shyam/ Bajaj].

S&F wall/ surface mounted type LED light fitting 1 X 20 watt (4' long) with extruded aluminum batten with multiple lumen packages complete with all accessories internally pre-wired and including making electric connection with flexible three core 1.50 sq.mm size stranded copper conductor cable from light fitting to ceiling rose complete all as specified and directed including taking down existing unserviceable light fitting. [Cat. Part No. BN021C LED22S PSU CW GR (SmartBright) of make: Philips or Cat No. ENDURALINEARNEOBS20WLED865SPCWH of make: Havells/ Cat No. CCS-100-20-65-HL2-DP-NWH of make: CG/ Cat No. LL20-221-XXX-65NE3 of make: Wipro]

S&F wall/ surface mounted type LED light fitting 1 X 9 to 12 watt (2' long) with extruded aluminum batten with multiple lumen packages complete with all accessories internally pre-wired and including making electric connection with flexible three core 1.50 sq.mm size stranded copper conductor cable from light fitting to ceiling rose complete all as specified and directed including taking down existing unserviceable light fitting. [Cat. Part No. BN 021 LED12S 6500 PSU GR (SmartBright) of make: Philips or Cat No. ENDURALINEARNEOBS10WLED865SPCWH of make: Havells/ Cat No. LL20-111-XXX-65NE3 of make: Wipro]

S&F wall/ surface mounted type LED light fitting 5 watt (1' long) polycarbonate with multiple lumen packages complete with all accessories internally pre-wired and including making electric connection with flexible twine core 1.50 sq.mm size stranded copper conductor cable from light fitting to ceiling rose complete all as specified and directed including taking down existing unserviceable light fitting. Make: Philips /Havells / CG/ Bajaj

S&F recess mounted direct lighting LED Luminaire 34-36W of size 2'x2', with powder coated CRCA housing, seamless front frame, flat white high transmission acrylic cover fixed to Modular/ Gypsum/ POP ceiling complete including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose to fitting all as directed including taking down existing unserviceable light fitting. [Cat No. PLUTONEO2X2PLR34WLED857S of make: Havells or Cat No. RC380B LED36S-6500 G5 L60W60 PSU OD of make: Philips or Cat No. LCTLRNE-36-FO-CDL of make: CG/ Cat No. CRCO10S038HP57GL of make Wipro with frame of Cat No. 9180P01089 LP]

S&F Recess mounted LED down lighter 18 to 20 Watt in powder coated/ aluminum die cast housing with integrated electronic driver complete including connecting up with three core twisted flexible copper conductor cable of suitable size all as directed including taking down existing unserviceable light fitting. [Cat No. GLOWDLR18WLED857S of make: Havells or Cat No. DN296B LED20S-6500 PSU WH of make: Philips or Cat No. LD90-231-XXX-65-XX of make: Wipro]

S&F LED bulk head light fitting 10W with IP-65 protection complete including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose to fitting and taking down existing unserviceable luminaire all as directed by Engineer-in-Charge. [Cat No. 'LBHP-10-CDL' of make: CG/ 'BIBWP 10W LED' of make: Bajaj/ LW07-141-XXX-57-G1 of make Wipro]

S&F LED Bldg Street light fitting 35-36 W, with pressure die cast aluminum housing with toughened glass and individual high power LEDs with secondary optics, IP-65 protection, roadway luminaire with high power LED as light source 1 x 35/36 Watt, complete with all accessories internally pre-wired complete including taking down complete all as specified and directed . Make : Phillips Model No BRP046 LED 36 CW MR S1 PSU GR, Havells Model No ENDURA CITY LITE PLAT PLUSS 135W LED 757 SAS YBOPC, Wipro Model No Skyline Plus LR13-501-XXX-57-XX

S&F Surface mounted LED down lighter 18 to 20 Watt in powder coated/ aluminum die cast housing with integrated electronic driver complete including connecting up with three core twisted flexible copper conductor cable of suitable size all as directed including taking down existing unserviceable light fitting. [Cat No. ENDURANEOHESURFA CEDLS21WLED857S of make: Havells or Cat No. SM251C LED20S- 6500 PSU WH of make: Philips or Cat No. BZSLOS NXT 18L LED WH SD of make Bajaj]

Supply and install integral LED aviation obstruction light 12W comprising of aluminum housing with polycarbonate enclosure, 302 nos. LEDs complete including necessary fixing arrangement, installed on top of hangars/ OH tanks etc. all as directed including taking down existing unserviceable light fitting. [Cat No. BGAV 302 LED of make: Bajaj or equivalent in Future Lighting Solutions (P) Ltd Nagpur/ Siren & Electricals, Chennai]

Supply and install LED post top lantern with spun aluminum housing with opal acrylic diffuser, 40-45W, IP 65 protection complete including necessary cable connection all as specified and as directed including taking down existing unserviceable fitting. [Cat No. CORALPT45WLED757PSYMTOPC of Make: Havells or Cat No. BGCTNP 40W LED WH of Make: Bajaj or Cat No. LP07-501-XXX-57-CL of Wipro].

S&F suspended/ surface type High bay luminaire not less than 150 Watt, environmental friendly, energy saving long life corrosion resistant vertical surface mounting pressure die-cast aluminum housing and control gear with high power LED with all mounting accessories for fixing to truss of hangar/ MT garage etc complete prewired with flexible 3 core 1.50sq.mm size stranded copper conductor cable from light fitting to ceiling rose complete all as specified and as directed including taking down existing unserviceable light fitting [Model: SAUSERPLUSHBP150WLED85790DTOLTG of make: Havells or BY415P LED160S CW HE WB FG PSU GR XTFCL S5 of make Philips or BGHBM NXT B 195L WH NB SD of make: Bajaj]

S&F switch piano, flush type, single pole, one way, 5/6 Amps, 230V AC all as specified.

S&F switch piano, flush type, single pole, 2- way, 5/6 Amps, 230V AC all as specified.

S&F Bell push, flush type, single pole, 5 Amps, 230V AC all as specified.

S&F Bell Ding Dong AC. 230 volts, single pole all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin, 5/6 and 15/16 amp flush type all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin, 5/6 amp flush type all as specified and directed.

S&F switch piano, flush type, single pole, one way, 15/16 Amps, 230V AC all as specified.

S&F fan regulator electronic socket step type, 100 Watts, 230 Volts, flush type all as specified.

S&F for Angle Holder, insulated body with back plate with & including LED Lamp 7 Watt suitable for batten fittings complete all as specified and directed by Engr-in-Charge.

S&F modular bell push 6 Amp one way 230 V AC, one module complete all as specified and directed

S&F modular snap switch 16 Amp one way 230 V AC, two modules complete all as specified and as directed.

S&F modular snap switch 6 Amp one way 230 V AC, one module complete all as specified and as directed.

S&F modular socket outlet 6 Amp multiple pin 230 V AC, two modules complete all as specified and as directed.

S&F modular socket outlet combination 16 Amp and 6 Amp heavy duty 230 V AC, two modules complete all as specified and as directed.

S&F modular type fan regulator electronic socket step type 120 W, two modules complete all as specified.

S&F Street Light bracket made of light grade GI pipe 32 mm bore and 1.2 m long duly bent to shape including 2 paired of MS Clamps made out of 40mm x 3mm M.S. flat, nuts, bolts, washers etc complete all as specified and as directed.

Horizontal Boring under hard standing/ pavements or roads manually using suitable auger for insertion of GI pipes up to 40 to 80 mm bore and making good the disturbed surface complete all as specified and as directed. [Note: GI pipe will be measured and paid separately]

Supply and laying XLPE insulated armoured heavy duty electric cable of size 4 core 25sq.mm with aluminum conductor 1100 Volts grade, ISI marked as per IS 7098-I, fixed to walls with necessary porcelain insulators and saddles etc. complete including taking down existing burnt cable all as specified.

Supply and laying XLPE insulated armoured heavy duty electric cable of size 3½ core 35sq.mm with aluminum conductor 1100 Volts grade, ISI marked as per IS 7098-I, fixed to walls with necessary porcelain insulators and saddles etc. complete including taking down existing burnt cable all as specified.

Excavating manually in trenches n. exc. 1.5m wide and n. exc. 1.5m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. and getting out in soft/ loose soil.

Returning, filling in including spreading leveling watering and well ramming in layers not exc. 25cm in any type of soil.

Removing excavated materials to a distance not exc. 50m and depositing where directed at a level n.exc 1.50m above the starting point.

Supply and spread dry sand as in cushioning for UG cable all as specified in clause 19.75 of SSR Part I. [Note: Punned down thickness shall be considered for payment]

Supply and laying dry burnt bricks, sub class ‘B’ old size in cable trenches for cable protection complete all as specified and as directed by the Engineer-in-Charge.

Supply and laying 50mm bore light grade ISI marked GI Tubing laid in trenches or inserting in horizontal boring for cable protection including fixing with MS Clamp and nut bolt all as specified and as directed.

Deduct: Amount of Schedule of Credit b/f from Sl. Page No. 16 of tender document i.e. Rs. 81,150.00

SONI ENTERPRISES

M/S BABA ENTERPRISES

S S ELECTRICALS

avon electric engineering woks