Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹9.9 LAccepted-AOC 129 A NICHLI CHOWKI DEVI NAGAR SECTOR 32 PANCHKULA HARYANA 134109 | PANCHKULA | HARYANA | 134109 | L-1 | Accepted-AOC Over all rates are reasonable and lowest. | |
| 2 | L-2₹10.0 L+₹4,576 (0.46%)Rejected-Finance H NO 786 ANAND VIHAR COLONY PILIBHIT BYPASS BAREILLY UP PIN 243005 | BAREILLY | UTTAR PRADESH | 243005 | L-2 | Rejected-Finance Over all rates are higher than L-1. | |
| 3 | L-3₹11.5 L+₹1.6 L (15.9%)Rejected-Finance | L-3 | Rejected-Finance Over all rates are higher than L-1. |
Tender Value
₹13.6 L
EMD Value
₹27,200
Closing Date
6 Nov 2021, 6:00 pmClosed
Garrison Engineer, Air Force, Bareilly
Garrison Engineer (AF) Military Engineer Services Bareilly - 243002
REPAIR AND MAINTENANCE OF VARIOUS SUBMERSIBLE PUMPS, CENTRIFUGAL PUMPS VARIOUS TYPE OF CHLORINE DOZERS ALONGWITH MISC ITEMS AT AF STATION, BAREILLY
2021_MES_481032_1
8613/E8
Open Tender
Civil Works - Water Works
Item Rate
180 days
BAREILLY
CLASS E CATEGORY a(ii)
7 documents required · 7 mandatory
₹500
Yes
Garrison Engineer (AF), Bareilly
₹27,200
Yes
11 Dec 2021
11 Oct 2021
8 Nov 2021
11 Oct 2021
6 Nov 2021
25 Oct 2021
Amount
M&L for taking out submersible pumping set 41 HP capacity of any make from bore well (60m deep) connected with 7/6 stage column pipe; and transporting the same to civil work shop, dismantling of pump and motor and checking out all electrical and mechanical parts for identification of fault / defective parts etc. re-assembling the pump motor set after carrying out necessary repairs, transporting back to original location and installed complete at site including necessary electrical and water connections testing & commissioning complete all as specified and as directed. Note: - Repairs/ replacement of various parts of pump; rewinding of motor etc. shall be measured & paid separately based on fault / test report and as directed by Engineer- in- Charge
Description all as per srl item No. 1 here-in-before but pumping set of 25 HP Capacity complete all as specified and as directed.
Description all as per srl item No. 1 here-in-before but pumping set of 10 HP / 12.5 HP capacity complete all as specified and as directed.
M&L for taking out submersible pumping set 0.5/ 2 HP capacity of any make from bore well (30m deep) connected with 3 stage column pipe; and transporting the same to civil work shop, dismantling of pump and motor and checking out all electrical and mechanical parts for identification of fault / defective parts etc. re-assembling the pump motor set after carrying out necessary repairs, transporting back to original location and installed complete at site including necessary electrical and water connections testing & commissioning complete all as specified and as directed. Note: - Repairs/ replacement of various parts of pump; rewinding of motor etc. shall be measured & paid separately based on fault / test report and as directed by Engineer- in- Charge.
Supply & replace SS impeller suitable for submersible pump set 41 HP capacity of any make complete all as specified and as directed.
Description all as per srl item No. 5 here-in-before but for submersible pump set of 25 HP capacity complete all as specified and as directed.
Description all as per srl item No.5 here-in-before but for submersible pump set of 10/ 12.5 HP capacity complete all as specified and as directed.
Description all as per srl item No.5 here-in-before but for submersible pump set of 0.5/ 2.0 HP capacity complete all as specified and as directed.
Supply & replace Coupling sleeve SS suitable for submersible pump set 41 HP capacity of any make complete all as specified and as directed.
Description all as per srl item No. 9 here-in-before but for submersible pump set of 25 HP capacity complete all as specified and as directed.
Description all as per srl item No. 9 here-in-before but for submersible pump set of 10 / 12.5 HP capacity complete all as specified and as directed.
Description all as per srl item No. 9 here-in-before but for submersible pump set of 0.5 / 2.0 HP capacity complete all as specified and as directed.
Supply & replace SS stud with nut suitable for submersible pump set 41 HP capacity of any make complete all as specified and as directed.
Description all as per srl item No. 13.00 here-in-before but for submersible pump set of 25 HP capacity complete all as specified and as directed.
Description all as per srl item No. 13.00 here-in-before but for submersible pump set of 10 / 12.5 HP capacity complete all as specified and as directed.
Description all as per srl item No. 13.00 here-in-before but for submersible pump set of 0.5 / 2.0 HP capacity complete all as specified and as directed.
Supply & replace Thrust plate with bearing suitable for submersible pump set 41 HP capacity of any make complete all as specified and as directed.
Description all as per Item No. 17.00 here-in-before but for submersible pump set of 25 HP capacity complete all as specified and as directed.
Description all as per srl item No. 17.00 here-in-before but for submersible pump set of 10 / 12.5 HP capacity complete all as specified and as directed.
Description all as per srl item No. 17.00 here-in-before but for submersible pump set of 0.5 / 2.0 HP capacity complete all as specified and as directed.
Supply & replace Bush GM suitable for submersible pump set 41 HP capacity of any make complete all as specified and as directed.
Description all as per srl item No. 21 here-in-before but for submersible pump set of 25 HP capacity complete all as specified and as directed.
Description all as per srl item No. 21 here-in-before but for submersible pump set of 10 / 12.5 HP capacity complete all as specified and as directed.
Description all as per srl item No. 21 here-in-before but for submersible pump set of 0.5 / 2.0 HP capacity complete all as specified and as directed.
Supply & replace Bush Rubber suitable for submersible pump set 41 HP capacity of any make complete all as specified and as directed.
Description all as per srl item No. 25 here-in-before but for submersible pump set of 25 HP capacity complete all as specified and as directed.
Description all as per srl item No. 25 here-in-before but for submersible pump set of 10 / 12.5 HP capacity complete all as specified and as directed.
Description all as per srl item No. 25 here-in-before but for submersible pump set of 0.5 / 2.0 HP capacity complete all as specified and as directed.
Supply & replace GM neck ring suitable for submersible pump set 41 HP capacity of any make complete all as specified and as directed.
Description all as per srl item No. 29.00 here-in-before but for submersible pump set of 25 HP capacity complete all as specified and as directed.
Description all as per srl item No. 29.00 here-in-before but for submersible pump set of 10 / 12.5 HP capacity complete all as specified and as directed.
M&L for rewinding of submersible Motor set 41 HP capacity of any make by taking out rotor, taking out burnt stator winding, cleaning the stator and rewinding the motor with appropriate gauge, weight and turns of super enameled copper wire using proper insulating material, varnishing with Class-I varnish, heating/ baking etc complete all as specified and directed by Engineer-in-Charge.
Description all as per srl item No. 32 here-in-before but for submersible pump set of 25 HP capacity complete all as specified and as directed.
Description all as per srl item No. 32 here-in-before but for submersible pump set of 10 / 12.5 HP capacity complete all as specified and as directed.
Description all as per srl item No. 32 here-in-before but for submersible pump set of 0.5 / 2.0 HP capacity complete all as specified and as directed.
Disconnecting the suction & delivery lines of the Centrifugal/ mono-block pump set of 0.5/3 HP capacity including pulley, coupling connected to the motor and removing of the pump, opening the pump, overhauling of the pump, machining, threading, tapping etc. including replacement of defective/worn out spares, packing kit, greasing, re-assembling, coupling with motor, refixing back in to the original position, reconnecting back the suction, delivery lines, realigning and testing complete all as directed by Engineer-in-charge: Note :- (i) Spares require replacement shall be measured and paid separately. (ii) Rate quoted deemed to be included for all minor spares, packing kit, gland rope, bolts, nuts, lubricants etc.
M&L for rewinding of Centrifugal/ mono-block motor set 0.5/3 HP capacity of any make by taking out rotor, taking out burnt stator winding, cleaning the stator and rewinding the motor with appropriate gauge, weight and turns of super enameled copper wire using proper insulating material, varnishing with Class-I varnish, heating/ baking etc complete all as specified and directed by Engineer-in-Charge.
Supply & replace Pump shaft MS suitable for 0.5/3 HP centrifugal pump set complete all as specified and as directed.
Supply & replace Guide spinner complete with bush suitable for 0.5/3 HP centrifugal pump set complete all as specified and directed
Supply & replace Gland bush suitable for 0.5/3 HP centrifugal pump set complete all as specified and directed.
Supply & replace CI impeller suitable for 0.5/3 HP centrifugal pump set complete all as specified and directed.
Supply & replace Coupling set suitable for 0.5/3 HP centrifugal pump set complete all as specified and directed.
Supply & replace Roller bearing and Ball bearing suitable for 0.5/3 HP centrifugal pump set complete all as specified and directed.
Supply & replace mechanical seal magnate suitable for 0.5/3 HP centrifugal pump set complete all as specified and directed.
Supply only Orthotodoline solution 500 ml complete all as specified and directed.
M&L for carrying out repairs to unserviceable Altoch based dozing pump including replacement of unserviceable parts and testing and commissioning complete all as specified and as directed. Note: Spares required and replacement shall be measured & paid separately.
Supply & replace PVC Dosing head assembly with suction and delivery adopter with NRV for 25 LPS complete all as specified and as directed.
Supply & replace PVC NRV set with glass ball for suction and delivery adopter complete all as specified and as directed.
Supply & replace PVC Adopter for suction and delivery with out NRV complete all as specified and as directed.
Supply & replace PVC Strainer washer type heavy duty or Y type strainer for suction complete all as specified and as directed.
Supply & replace Teflon gland square type 3mm complete all as specified and as directed.
Supply & replace Chemical oil seal with cap complete all as specified and as directed.
Supply & replace Dosing agitator gear box 25 LPS complete all as specified and as directed.
Supply & replace Plunger assembly with out PVC dosing head complete all as specified and as directed.
Supply & replace Plunger assembly with PVC casing head complete all as specified and as directed.
Supply & replace Heavy duty FRP Tank capacity 150 Ltr complete all as specified and as directed.
S&F Glow sign board with PVC letters of height 10" including LED 15 watts module light for each letter, made of aluminium composite panel 5mm thick on both sides, 72 Sq.ft of face area (Approx) with MS angle iron frame complete mounted on pump house gate complete all as directed by Engineer-in-Charge.
S&F Glow sign board with PVC letters of height 8" including LED 12 watts module light for each letter, made of aluminium composite panel 5mm thick on both sides, 4'x3' size with MS angle iron frame complete all as directed by Engineer-in-Charge.
S&F Notice board of size (2'x3') suitable for fixing of standing order, fire order, duty roster etc. complete all as directed by Engineer-in-Charge.
S&F Sign board of size (2'x3') for display of bore hole and installed Pump with vinyl letters of height 1" complete all as directed by Engineer-in-Charge.
S&F Electric shock treatment chart plastic coated of size (2'x3') complete all as directed by Engineer-in-Charge.
S&F Fire chart plastic coated of size (2'x3') complete all as directed by Engineer-in-Charge.
S&F spun yarn complete all as specified and as directed.
Supply only chlorine test kit with coloured ample complete with all testing filament and OT solution in rexine box complete all as specified and as directed.
Supply and lowering of M.S column pipes heavy duty 100mm dia bore, 3.00m long each pipe with threaded ends, fixed with two Nos M.S flange on both end, including welding (both inside and outside) and drilling holes on flanges as per existing size/ grinding etc. complete all as specified and as directed. [Make: Jindal/ Tata/ Sail].
S&F submersible copper cable flat type three core of size 2.5 Sq.mm complete all as specified and as directed. [Make:- Polycab/ Havells/ RR Kabel/ Finolex]
Supply only bleaching powder confirming to IS-1065 in air tight polythene bags of 25 Kg capacity complete all as specified and as directed.
Clearing away all grass, vegetation, saplings, shrubs, brushwood, undergrowth, un- wanted plants, roots and removing the rubbish up to a distance of 50 meters outside the periphery of the area under clearance all as specified and as directed by the Engineer-in-Charge.
Collection of water sample from the bore well for testing of Physical, Bacteriological and chemical analysis of potability for drinking purpose from Govt/Authorized lab complete all as specified and as directed.
Taking out unserviceable/ burnt DOL starter including 3 phase electrical connection, supply & fixing Direct on line starter (4-6.5 Amps Relay Range) suitable for submersible pump sets up to 3 HP, 415 Volt, 3 phase in the LT Panel board with suitable size of copper lugs/wire complete all as directed & specified. [Cat No SS97756COTO (MU-G6 DOL) of Make: L&T or equivalent in Siemens/ BCH].
Taking out unserviceable/ burnt DOL starter including single phase electrical connection, supply & fixing Direct on line starter (12-20 Amps Relay Range) suitable for submersible pump sets up to 2 HP, 230 Volt, 1 phase with volt & ammeter in the LT Panel board with suitable size of copper lugs/wire complete all as directed & specified. [Cat No SS97732OOCG) of Make: L&T or equivalent in Siemens/ BCH].
S&F power contactor heavy duty, 3 pole, 415V, 45 Amps (AC1) capacity, with auxiliary contactors of 2 NO + 2 NC including taking down old unserviceable contactor. [Make: L&T, type ML, Cat No. SS90721 or equivalent in Schneider/ Siemens]
S&F power contactor heavy duty, 3 pole, 415V, AC3 70 Amps & AC1 100 Amps capacity with auxiliary contacts of 2 NO + 2 NC including taking down old unserviceable contactor. [Make: L&T, type MNX, Cat No CS97076 or equivalent in Schneider/ Siemens]
S&F power contactor heavy duty, 3 pole, 415V, AC3 40 Amps & AC1 55 Amps capacity with auxiliary contacts of 2 NO + 2 NC including taking down old unserviceable contactor. [Make: L&T, type MNX, Cat No CS94190 or equivalent in Schneider/ Siemens]
S&F power contactor heavy duty, 3 pole, 415V, AC3 25 Amps & AC1 45 Amps capacity with auxiliary contacts of 2 NO + 2 NC including taking down old unserviceable contactor. [Make: L&T, type MNX, Cat No CS94110 or equivalent in Schneider/ Siemens]
Supply and fixing Spare kit without coil for contactor type MNX-70 cat No CS 94151 complete all as specified and directed.
Supply and fixing electronic timer type ST-100, 240/360/415 Volt, 50 Hz, 12-120 Sec complete all as specified and directed.
Supply and fixing O/L relay 6 to 10 Amps 3 pole, directly operated complete all as specified and directed.
S&F in repairs push button unit for Star delta starter complete all as directed. Make: L&T Cat No-SS90004 or equivalent in Siemens/ Schneider.
S&F in repairs single phase preventer, 415 Volt AC, 50 Hz including replacement of internal copper wire connections complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of new steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.
Zaigham Enterprises
sunder and company
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .