e NIT No. -WBIW/EE/BID/e-NIT- 29 of 2025-26, Sl No. - 75

Earthwork from borrow pits over existing embankment or for repairs to embankment, closing breaches etc. within an initial lead of 30 metre and lift of 1.50 metre including breaking clods and depositing the same in layers not exceeding 25 cm. and rough dressing etc. complete as per profile.

Extra rate over Item Nos.1.01 for all kinds of soil for every additional lead of 30 metres or part thereof beyond the initial lead of 30 metres. i) 02 (Two) Nos. Extra Lead

i) 04 (Four) Nos. Extra Lead

Extra rate over Item Nos.1.01 for all kinds of soil for every additional lift of 1.50 metre or part thereof beyond the initial lift of 1.50 metre i) 01 ( One ) No. Exrtra Lift

Supplying, dressing and stacking at site bamboo pins above 5 cm. diameter and upto 7.5 cm. diameter. (Dia. to be measured at mid length).

Driving bamboo pins in standing or flowing water including scaffolding and driving appliances. (a) Where boats are not necessary.

Supplying, fitting and fixing with iron nails half split bamboo wailing pieces (av. dia. of bamboo not less than 5.0 cm.)

Supplying to site empty cement polythene bags (capacity 50kg) in good condition including stacking, incedental charges etc. all complete (capacity 50 kg).

Labour charges for filling empty cement gunny bag / polythene bag (capacity 50 kg) with all kinds of earth (wet or dry), sand or agreegates(stone / brick) and sewing as done in case of cement bags ,( tying with a knot after filling will not be accepted ) , and stacking within a lead of 30 metre as per direction of Engr-in-charge (cost is excluding the cost of any types of filling materials). NB:- Volume of earth/ sand filled bags should not be less than 0.028 cum/ bag. (capacity 50 kg).

Dumping in position earth / sand filled gunny / poly bags (capacity 50 kg) within a lead of 30 metre inclusive of all lifts.

Supplying and laying Polythene Sheet (150 gm /sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.

Supplying fitting, fixing Darma mat in flowing or stagnant water or in dry areas with 16 SWG GI wire as per direction of the Engineerr-in-charge. A) Where boats are not necessary

Making sausages circular in section (any length) made with 1st class kiln burnt / 1st class picked jhama full bricks rolled inside wire net caging made of 10 S.W.G. galvanised iron wire square pattern (internal dimension of mesh will be 100 mm. x 100 mm. square) galvanised wirenet caging with proper lapping of minimum 150 mm and sewing with 12 SWG. galvanised iron wire including cost of all materials, carriage up to site, placing and laying the same after preparing the bed/trench to proper slope etc. complete as per direction of the Engineer-in-charge. (cost is excluding the cost of end pieces .) b) 0.75 metre diameter.

Supplying, fitting, fixing end pieces for rectangular / square / circular sausages at the ends, with 10 SWG / 8 SWG G I wire net of different mesh sizes tying & sewing the same maintaning a lap langth of 150 mm all around with 12 SWG G I wire complete, including the cost of supply of wire netting,fitting etc, complete as per direction of the Engineer - in - charge. a) Mesh size 100 mm x 100 mm with 10 SWG wire

Please Enable Macros to View BoQ information