NIT NO. 15 ITEM NO. 06

Dismantling of electric connection from panel and motor, pump and motor from coupling, motor and pump removed from base frame. Removing suction and delivery lines, sluice valves, NRV, old damaged MS base frame from foundation etc by electric cutter, gas cutter, tools and tackles, manual labour and shifting the same to JE store. Removing the old charging pump from base frame and dismantling the GI line ,PVC tank, valves etc as per site requirement and directions of engineer in charge

Breaking of existing RCC foundation of size 170cm X 90 cm X 73 cm by manual means including manual tools or electric demolition hammer as per site requirement including digging upto 50 cm for laying the new foundation and disposing off malba as per instructions from engineer – in – charge within 1 km of radius from site.

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump including form work and finishing etc as required and as per site requirement for size 1.7 m X 1.4 m X 0.73 m. Total 1.74 cum

Providing and fixing of MS base frame as per site sample and directions of engineer in charge for 60 HP motor and pumpset.

Supply of vacuum pump D.V. 40 bronze impeller C-40 shaft with gland packing with 5 HP horizontal foot mounted induction motor suitable for operation of 415 +- 10% 3 phase 50 Hz +- 5 % supply with F glass insulation for ambient to IS 325 and coupled with tyre coupling with M.S. Guard and suitable M.S. Fabricated base frame with alignment of motor and vacuum pump set complete. Make: Kirloskar/ABB / DJB approved make.

Supply of 40 mm dia GI pipe medium class confirming to IS 1239. DSR 2018 item No.2826.

Supply of 20 mm dia G.I pipe medium class confirming to IS 1239. DSR 2018 item No.2825.

Supply of 40 mm dia G.M. gate valve screwed in bonnet inside screw non rising stem. Make: - Sant/Leader/DJB approved make.

Supply of 20 mm dia G.M. gate valve screwed in bonnet inside screw non rising stem. Make: - Sant/Leader/DJB approved make.

Fabrication of MS structure with 4 nos I beam MB125 of 4 mtr long vertically for supporting the platform in clear space 2 mtr MS beam to beam or as per availability of site space. Fabrication of platform frame by 4 nos 2 mtr long MS I beam welded on the top of vertical beam thereafter welding the 4 nos MS Tee iron of size 50X50x6mm, 2mtr long welded in between the frame and 8 nos MS angle iron of size 50x50x6mm 4 mtr long welded in cross of giving strength to vertical I beam and 4 nos MS Plates of size 300 x 300 x 8mm welded in the bottom of I beam for grouting. Providing and welding of MS Sheet of size 2000x2000x2mm welded at the top of platform for proper supporting the water storing tank i/c painting the complete structure with red oxide primer and black enamel paint.

Installation of complete charging set with motor with coupling guard and base frame complete with civil work for fitting of charging set & motor the 40 mm dia G.I. pipe & gate valve and 20 mm dia G.I pipe charging set to storage tank with required elbow union & socket 40mm dia 20mm dia as per site requirement and the 1000 liters capacity storage tank make:- Sintex / and testing on full load complete at site

Providing of complete tyre coupling set equivalent to TC/016 including complete set with nuts and bolts. Make: Unique/ FTC / DJB approved make

Fabrication /fixing of coupling guard made by 40mmX6mm M.S Flat and M.S sheet. Work including dismantling of damaged coupling guard and fixing of new coupling guard in all respect with anticorrosive primer and painting with black synthetic enamel paint.

Supply of foot valve 200 mm make Kirloskar/IVC/DJB approved make

Providing/Fixing of S.S. pressure gauge having range 0 to 100 psi and 150 mm dia including pipe fittings, bib cock etc. Make: H Guru, Fibeg, DJB approved make

Supply of M.S. Pipe 200 mm B class make Jindal / tata / DJB approved make

Supply of M.S. bend of 200 mm dia, 900 heavy duty of atleast 6 mm thickness.ISI/Jindal/DJB approved make

Supply of M.S. Flange 200 mm dia heavy duty holes as per site requirement.ISI/Jindal/DJB approved make

Supply of M.S. Nut bolt & Washer of off size. Make: ISI Mark

Supply of Neoprene Rubber sheet. Make: Jyoti/ DJB approved make

Supply of M.S. Pipe 150 mm B class make Jindal / tata / DJB approved make

Supply of M.S. bend of 150 mm dia, 900 heavy duty.Make: Jindal / Tata / DJB approved make

Supply of M.S. Flange 150 mm dia heavy holes as per site requirement. With 14 mm thickness

Supply of 200 mm non rising sluice valve of atleast PN 1.6. Make: Kirloskar/IVC/ DJB approved

Supply of 150 mm CI NRV of PN 1.0 rating. Make Kirloskar/IVC/ DJB approved make

Supply of fully automatic oil immersed star delta motor starter suitable for 60 HP induction motor. Make: L&T/Bentex/Schneider/DJB approved make

Installation and fixing of all the above electrical and mechanical material with required material handling equipments with all safety precautions for installation in the UGR. The job i/c erection the complete pipeline, valve, NRV with hardware goods on each joint, connecting the delivery line of the pump with the existing header line and suction line to the UGR after providing the shutdown. The job includes covering the pipeline with necessary civil work for foundation and covering the pipeline with cement, making electric connections to motors and starters while taking proper safety precautions etc as per site engineer in charge

Painting the complete pipeline, motor, pumpsets, nrv, sluice valves etc with two coats of anti- corrosive paint as per directions of engineer in charge.

Testing & commissioning of above system first at NO LOAD & then at ON LOAD and for its proper operating as per the satisfaction of engineer in charge.

INSTANT TRADE CORPORATION

ARIHANT ENGINEERS AND TRADERS