Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹10 L
EMD Value
₹2 L
Closing Date
2 Dec 2021, 6:55 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Project Manager Unit-44
C and D S Unit-44 U P Jal Nigam Ayodhya
Maharaja Suheldev Smarak
2021_UPCDS_648612_1
1595/M-10/42 Dt 27/11/2021
Open Tender
Civil Works - Others
Item Wise
7 days
Baharaich
As per Bid Document
2 documents required · 2 mandatory
₹1,180
Director C D S
₹2 L
3 Dec 2021
27 Nov 2021
2 Dec 2021
27 Nov 2021
2 Dec 2021
27 Nov 2021
Amount
Supply Of Labour
Earth work in Excavation by mechanical means ( Hydraulic excavator)/manual means over areas ( Excluding 30 cm in depth 1.5m in width as well as 10sqm on plan ) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 as directed by Engineer -in charge, all kind of Soil
Earth work in excavation by mechanical means (Hydraulic excavator )/manual means in foundation trenches or drains ( not exceeding 1.5 m in width or 10 sqm on plan ) including dressing of side and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m
Labour Charges for shifting of excavated earth upto 1.00 km or campus by tractor trolly or Dumfer as per direction of E/I.
(a) Labour charges for filling in trenches & in floors with available excavated earth in layers not exceeding 20 cm. in depth including watering, ramming and dressing of the surface.
(b) --------0------ but for local sand etc.
Labour charges for extra for every additional lift of 1.50 mts. Or lead of 50 mts. Or part thereof.
Labour charge for leveling and dressing including earth work upto 15cm in depth as per direction of engineer in charge
Labour charges for jungle clearance including de| rooting as per P.W.D. detail specification and direction of E/I
Particulars Providing injection chemical emulsion for preconstructional anti-termite treatment and creating a chemical barrier under and all-round the column pits. Wall trenches basement excavation top surface it plinth filling junction of wall and floor along the external perimeter of binding expansion joint surrounding of pipe and conduit etc. Complete (plinth area of the building at ground floor only shall be measured as per IS 6313 part II 1981) aldrine or any other
Masonry and foundation 5 ltr. per Sq. Mtr., back fill in immediate contact with foundation 7.5 ltr. per Sq. Mtr., top surface of plinth filling Itr. per Sq.Mtr., treatment of soil under apron along external perimeter 5 ltr. Sq.Mtr
Providing & injecting chemical emulsion for post-constructional as per 6313 pad III 1981 with latest specification
Providing and injecting chemical emulsion for Anti Termite Treatment of wood
Labour charges for laying cement concrete 1:4:8 / 1:5:10 as specified mix in foundation or in under floors including compaction as per direction of E/I
Labour charges for R.C.C work in foundation, slab, beam, columns, T-beams, lintels, etc. in specified mix excluding curing, shuttering, bending and binding and using vibrator for compaction as per direction of E/I
In foundation raft grade beams, Boundary wall beams, etc. Up to plinth level.
In ground floor above plinth but including ground floor slab height up to 4.25 Mts.
--Do--but for columns.
For walls and thin beams lintels upto 30 cm. thick
Add extra above ground floor and for each additional floor when hoist is not used upto III floor slab only
(i) Add extra above ground floor each additional floor when hoist is not used. Floor height 3.2 mts.
(ii) Add extra for design mix concrete when concrete mixed through weigh batcher in above manual concrete.
(A) Labour charges for R.C.C. work in thin selves from 25 mm to 40 mm thick including shuttering reinforcement etc. including finishing and all repairs for ground floor excluding loft and sun shades in specified mix.
R.C.C IN VAULTS: (a) Upto 6.50 cms. Ihick
(b) Above 6.50 cms. Thick
(c) Add extra for every additional floor height 4.25 mts. above G.F.
(a) As in item No. 24 (a) above but RCC in precast units in thin shelves upto 5 cms. thick including reinforcement and finishing etc
Hire charge of mixer with hopper for mixing of cement concrete including operator, running and maintenance of mixer machine but excluding cost of fuel.
Hire charge of Vibrator with operator and required fuel complete
Labour charges for brick work in foundation & plinth with cement mortar of specified mix excluding cost of T & P and curing as per direction of E/I
Same as above but for random stone masonry
Labour charges for brick work in specified mix of Cement Mortar in super structure above plinth level including necessary cutting of bricks as required excluding T&P and curing as per direction of E/I
(a) One & half brick wall
(b) One brick wall
(c) Half brick wall
(d) Same as above but brick tile brick masonry 5 cm thick in super structure (as in railing, facia and fins etc.)
Add extra in item 3.2 @ above for placing hoop iron on each 4” course as specified as per direction of E/I
Add extra on item 33,34,35,36,37,38 & 39 above for each floor above ground floor height upto 4.25 mt.
Labour charges for brick work in specified mix in step over the ramp for staircases including cutting of brick etc. as required as per direction of E/I
(a) upto 1.50 mtr. width staircase
(b)Above 1.50 to 2.00 mtr. Wide staircase
Labour charges for 40mm thick DPC with mixing of water proof chemical
Labour charges for painting of DPC with two coat of bitumen including heating of bitumen but excluding cost of fuel wood as per direction of E/I.
Labour charges for fixing of Door Chaukhats, wooden pressed steel, Z-iron in masonry/concrete in specified mix in ground flooring including cutting of brick hole.
Upto 1.5 Sqm. Area
Above 1.5 sqm. area upto 4.0 Sqm.
Ventilators upto 0.5 Sqm.
Labour charge for fixing of angle iron nosing in specified mix where ever required as per direction of E/I.
(a) Labour charges for fixing of doors shutter in chaukhats including fixing of all fittings required as per direction of E/.I
(b) For double doors Shutters add extra.
(c) Same as item No. 54 but for laminated door shutter.
Labour charges for cutting, bending, placing & binding of reinforcement including its strengthening but including cost of binding wire as per direction of E/I
(a) Upto 8mm dia
(b) 10mm to 16mm dia
(c) Above 16mm
Labour charges for fabrication work including cost of electrode hire charges of welding machine electricity etc. complete as per direction of E/I.
Hire charge for fixing and removal of steel pipe scaffolding including supply of steel pipes etc for proper completion of work.
Fixing and removal of shuttering wooden / steel including its hire charges & supply of all material nails , shuttering oils, cotton waste etc as required including all labour and T & P complete required for proper completion of work.
a. For foundation, footing, pedestal, grade beam, columns upto ground floor
b. For suspended floor, roof, chazza, landing, RCC wall
c. Same as above but in beams and lintel
d. Same as above but in columns
e. Same as above but in coffer slab grid less than 3.00 mt x 3.00 mt
The above rates for ground floor height 3.5 mt only. Add extra 5% for each floor above ground floor.
f. Extra for additional height in centering, shuttering wherever required adequate bracing , propping etc including cost of decentering at all levels over a height of 3.5 mt for every additional height of 1.00 mt or part there of (CPWD) specification including cost of all material, labour and T&P required for proper completion of work.
Labour charges for cement plaster in single coat on wall in specified mix including wetting the surface & racking the joints as per direction of E/I excluding cost of curing and T&P
(a) upto 12 mm thick
(b) 12 mm to 20 mm thick.
12 mm thick ceiling plaster in 1:4 Cement Coarse Sand mortar as per direction of E/I.
Chipping of RCC surface to make rough for plaster as required as per direction of E/I.
Labour charges for making drip course in sun sheds or facia as directed by E/I
(a) Labour charges for engraving lines plaster for making groove as required as per direction of E/I.
(C) Making edges of beams and independent column, extra edges of steps, cornices etc
(a) Labour charges for fixing of marble or kota stone flooring with base of cement coarse sand mortar including cutting by machine and rubbing of edges as required with approved pattern including floor cutting and polishing including hire charge of cutting machine carborandom stone but excluding cost of polishing material for proper completion of work as per direction of E/I.
1. Kota stone flooring.
2. Marble stone flooring.
(b) ......do...... but in staircase tread.
(c) Marble/Kota stone skirting 100mm to 150mm wide skirting.
(d) Labour charges for flooring with terrazzo tile over a base of 20mm thick cement C. sand mortar including cutting and polishing, hire charges of cutting machine, carborandum stone but excluding cost of polishing material.
Making molding
In granite stone (18mm +2mm thick)
do-but 30mm thick
In Sand Stone (25mm, thick)
In Sand Stone (30mm, thick)
In Sand Stone (40mm, thick)
In Sand Stone (50mm, thick)
In Sand Stone (75mm, thick)
a. Labour charge for fixing of vitrified tilc with designer floor with dibby and border or any other pattern as per approved design
b. - Do - but plain work with border
c. Fixing of vitrificd skirting
d. Fixing of kota/marble skirting
a. Fixing of Interlocking Block Joint filled with Sand.
b.Labour charge for fixing of Chequerd tile
Labour charges for fixing of glazed/matt finished walls and floor tiles of different design 6mm thick in cement coarse sand mortar including cutting of tiles as required in approved pattern including grouting with white cement and pigment as per direction of E/I.
a. For tiles size 150x150mm and above.
c. Tile Skirting
d. Extra for fixing Borders 3”,4" wide.
e. Fixing of granite floor.
f. Slab Granite floor.
g. Fixing of Granite Stone Flooring Area of Slab Over 0.50 sqm
h. Fixing of Granite Stone Cladding / Facia
i....do...Skirting and Riser
Shifting of material by head load upto 50 mt only
a. General material
b. RCC Malwa upto 100 mt lead
c. Bricks
d. Cement
e. Steel
f. Unloading of steel from truck
Shifting of mixer machine by labour including installation at platform with dry brick work lead upto 50 mt
Shifting of material per 50mt beyond initial 50 mt lead
Local cartage by tractor / canter (within 1 Kms.) including loading, unloading and stacking complete. If departmental trucks or tractor is not used
a. General material
b. Bricks
c. Steel
d. Cement
e. RCC malwa with JCB dumper
Stacking of material in required size as per direction of E/I
a. Sand, Grit etc
b. Bricks
Labour charge for layout of the building including marking centre line as required at site per direction of E/I
a. Upto 500 sqm area
b. 500 to 1000 sąm area
c. 1000 to 2000 sqm area
a. Labour charge for making level pillars upto 45cm height
b. - Do - but above 45cm ht upto 70 cm ht
Labour charge for layout of building above ground floor for each every floor for frame structure building 40% on above item No. 1
Labour charge for making gangway with scaffolding pipe and coupler including MS chahli for steps as required floor including dismantling complete
Labour charge for fixing of MS stair railing post height upto 1 mt with 1:2:4 cement :C.sand:stone grit as required in straight length & line as per direction of Er i/c
a. Labour charge for dismantling of brick work in cement mortar / lime mortar including stacking of dismantled materials as per required place upto 60 mt distance as per direction of Er/In.
b.-Do- but in mud mortar
C. - Do - but in RCC and reinforced brick work
d. - DO - but in roof lime concrete
a. Dismantling of cement concrete or brick work or granolithic floor including stacking of dismantled material as per required place upto 60 mt distance.
b. - DO - but floor to be stone flagged or tiled roof
Dismantling of RCC pile upto 300mm dia and depth upto 1.00 mt including disposal of malwa upto 50mt
Racking of joints of brick work in cement or lime mortar to depth of 1 cm including disposal of refuse as directed by Er/in
Labour charge for fixing of CGI sheet roofing including J hook , nut bolts and bituminous washer in carriage from store to required place at site
Labour charge for dismantling of CGI sheet roofing and stacking CGI sheet including carriage as per direction of Er/in
Labour charge for making window sill with 25mm thick 1:2:4 CC flooring as per direction of Er/in
Labour charge for casting of precast RCC lintel upto 1.50 mt including reinforcement and shuttering as required
Labour charge for placing and fixing RCC lintel upto 1.50 mt including carriage from required place as per direction of Er/in
Labour charge ( on polished kota stone / marble floor) for mirror polishing diamond finish including hiring charge of cutting machine, granite batti excluding cost of polishing material
Finishing of walls/ceiling by plaster of paris / birla putty to make smooth surface as required including supply of all material , labour and T & P required for proper completion of work
Labour charge for layout of centre line for columns at different level
Above pedestal level
Above ground / plinth beam
Above tic beam
Labour charge for fixing and removal of starter for columns
Labour charge for casting of starter for columns
Hire charge for 75 KVA generator with operator and without fuel for 8 hours
Hire charge for 40 KVA generator with operator and without fuel for 8 hours
Cutting pile head upto cut-off level including disposal of malvas making pile head complete 400mm dia
Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading plate from and preparation of pile head of construction of test cap and dismantling of test cap after test including T&P required complete as per specification of E/I (for test upto 100 tons.)
a. Initial Load Test
b. Routine Load Test
Providing and fixing of 75 mm thick Chunar sand stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar.
Providing and fixing of Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc
Providing and injecting chemical emulsion for Preconstructional antitermite treatment and creating a chemical barrier under and alround the column pitswall trenches basement excavation top surface if plinth filling junction of wall and floor along the external perimer of binding expansion joints,surroundings of pipes and conduit etc. complete(Plinth area of the building at ground floor only shall be measuredas per I.S. 6313 (Part II 1981) Aldrine emulsifiable concentrate or any other approved material such as Hepthachlor or chlordance will be used. The rateof applications of chemical emulsion shall be as Follows :- (1) Treatment for Masonary & foundatiion 5 Liters per Sq.m.(2) Back fill in immediate contract with foundation 7.5 Litres per Sq.M. (3) Treatment of Top surface of plinth filling 5 Litres per Sq.M. (4) Treatment of soil along External Perimerter of Building 7.50 Litres per Sq.M. (5) Treatment of soil under Apron Along extrnal Perimeter 5 litres per sq.M
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class Teak wood
Providing & fixing glass panes with putty and glazing clips in steel / Wooden doors, windows, clerestory windows, all complete with : 5 mm thick glass panes
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade
Providing and Laying of French spirit polishing: Two or more coats on works including a coat of wood filler.
Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.
Providing and fixing red sand stone brackets 55x22.5x45 cm sunk and moulded including providing and fixing with 4 Nos gun metal cramp 25x6 mm 30 cm long
Finishing walls withAcrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately). Red sand stone - 30mm thick gang saw cut stone
Providing and fixing adjustable stainless steel cramps of approved quality, required shape and size, adjustable with stainless steel nuts, bolts and washer (total weight not less than 260 gms), for dry stone cladding fixed on frame work at suitable location, including making necessary recesses in stone slab, drilling required holes etc complete as per direction of the Engineer-in-charge.
Stone work ashlar sunk or moulded or sunk and moulded upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : Red sand stone
Sand stone cutting Making moulding & cornice ingraving as per Design in direction of engineer in charge.
Providing & Fixing of S.S.Plate 304 Grade for Plaque including fixing of bolts Text ingraved by machine as per drawing & design and approval of Architect in charge
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc. Red sand stone
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Second class teak wood
Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete. (Make - Saint gobain/ Asahi/ Modigardian)
Providing & fixing of 75mm thick second class teak wood Panel including moulding & ingraving brass in traditional style including brass fittings (ie. Brass Door Latch, Towerbolt, Sliding bolt Hevey Duty) and necessary screw and all necessary work as per drawing & design etc al complete in direction of architect in charge.
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete
Supplying & Laying of Sand mixed Gravels including all necessary lead & lift with compaction etc all complete in direction of engineer in charge.
Supplying & Laying of Graced stone chips (22-4-53 Gauge stone) including all necessary lead & lift with compaction etc all complete in direction of engineer in charge.
Supplying & laying of drainage composite for use behind walls, between two different fills, alongside drains of road, below concrete lining of canals etc. Geocomposite for planar drainage, realized by thermobonding a draining core in extruded monofilaments with two filtering nonwoven geotextiles that may also be working as separation or protecting layers. The draining three dimensional core will have a “W” configuration as longitudinal parallel channels. Minimum thickness to be 7.2mm, with two filtering UV stabilized polypropylene nonwoven geotextile of minimum thickness of 0.75mm charecteristic opening size (O90) of 110 micron and tensile strength of 8.0 kN/m that will be working as separation or protecting layer, geocomposite having in plane flow capacity of 2.1 L / (m.s) at hydraulic gradient of 1.0 & 20 kPa pressure and tensile strength of 18 kN/m , with mass per unit area of 740 gsm, supplied in the form of roll for easy transportation to site of work as per detailed specification all complete as per directions of Engineer in charge.
Providing & fixing of MS Railing / Hollow Tubes including holdfast & grill with one coat priming etc all complete as per drawing & design etc all complete in direction of engineer in charge.
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture
Finishing walls withAcrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
Providing factory made kerb stone of M-25 grade cement concrete of size 300x300x125mm
Labour charge making kerb channel 30 cm wide and 50 mm thick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth etc. complete and as per direction of Engineer-in-charge.
Construction of embankment with approved material deposited at site from cutting and excaration from drain and foudation of other stracture graded and compacted to meet requirment of as per technical specification
Laying of RCC Hume pipe 600MM DIA NP-3 with 1:2 cement excluding excaration proteetion work back filling , concrete & managery work
Laying of RCC Hume pipe 300MM DIA NP-3 with 1:2 cement excluding excaration proteetion work back filling , concrete & managery work
Laying of RCC Hume pipe 250MM DIA NP-3 with 1:2 cement excluding excaration proteetion work back filling , concrete & managery work
Labour charges for CC pavcment with RMC and r.m.c. Laid and finished with screed board vibrator, vaccume dewating process and finally finished by hoating brooming with wire brush .
L/C for laying pitching on slope laid over filter media including boulder apnn laid dry in front of toe of embackment complete.
Supply GSB (Granular sub base ) stone grit of approve quality
Supply of stone boulders of average size of 40kg of approve quality
Labour Charge for filling of fine sand in cement bag stracking at appropriate places to the purpose of making coffer dam etc comp.
Labour charge for fixing of factory made kerb stone 1:3 with cement coarse sand and making groove at joints
Auravision Builders & Developers Pvt. Ltd.
M/S SHREE ENTERPRISES
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .