Kerala

Active

Works

Civil Works - Buildings

Matsyafed Net Factory at Kannur Maintenance of Godown and Construction of Vehicle shed

Matsyafed

Matsyafed Net Factory Azhikkal | Kannur, Kerala

Amount: ₹10.9 LCloses: 24 Oct 20264d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published13 Oct 2026
Closes24 Oct 2026
Bid Opening27 Oct 2026

Tender Value

₹10.9 L

EMD Value

₹27,271

Closing Date

24 Oct 2026, 3:00 pm4d left

Tender Inviting Organisation

Name

Managing Director, Matsyafed

Address

Matsyafed Head Office, Kamaleswaram, Manacaud P.O, Thiruvananthapuram

Work Description

Demolishing, plastering, and finishing works, including wall cutting, cement plastering, provision of rolling shutter, and epoxy painting of steel components. Construction of a vehicle shed, comprising structural steel work for frame etc

Tender Information

Tender ID

2026_MFED_878845_1

Reference Number

MFED/1307/2025-ENGG

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Item Rate

Location

Matsyafed Net Factory Azhikkal

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

11 documents required · 11 mandatory

Fee/PreQual/Technical/Finance

RequiredDuly Signed Notice Inviting Tender (.pdf)

RequiredDuly Signed Standard Bid Document (.pdf)

RequiredDuly Filled and Signed Form of Tender (.pdf)

RequiredDuly Filled and Signed Preliminary Agreement (.pdf)

RequiredDuly Filled and Signed Payment Requisition Form (.pdf)

RequiredDuly Filled and Signed Affidavit (.pdf)

RequiredDuly Filled and Signed Integrity Pact Certificate (.pdf)

RequiredSelf Attested Copy of Valid Registration Certificate, Civil from PWD/CPWD/Other Central (.pdf)

RequiredSelf Attested Copy of GST Certificate and PAN Card (.pdf)

RequiredSelf Attested Copy of Engineering/Diploma Personnel Certificate (.pdf)

RequiredPriced Bill of Quantities (BoQ) (.xls)

Fee & Financial Details

Tender Fee Amount

₹2,760

EMD Fee Amount

₹27,271

Important Dates

Last Activity

13 Oct 2026

Published

13 Oct 2026

Bid Opening

27 Oct 2026

Download Starts

13 Oct 2026

Download Ends

24 Oct 2026

Submission Starts

13 Oct 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (8 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Demolishing, Plastering and Finishing
1.01	15.7.4 Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar	1.65	cum	-	-
1.02	13.3.1 20 mm cement plaster of mix:1:4 (1 cement : 4 fine sand)	3.7	sqm	-	-
1.03	10.6.1 Supplying and fixing rolling shutters of approved make, made of required size M.S.laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS:4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25mm M.S. laths with 1.25 mm thick top cover	3.75	sqm	-	-
1.04	13.52.1 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work	9.38	sqm	-	-
2Vehicle Shed
2.01	50.10.1 Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	278.14	kg	-	-
2.02	50.10.2 Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	101.4	kg	-	-
2.03	12.1.3 Providing corrugate G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I.limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/m2	48	sqm	-	-
3Floor Tiles

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.72 MB

Tendernotice_2.pdf

PDF • 0.93 MB

Tendernotice_3.pdf

PDF • 0.44 MB

Tendernotice_4.pdf

PDF • 0.52 MB

Tendernotice_5.pdf

PDF • 0.20 MB

Tendernotice_6.pdf

PDF • 0.34 MB

Tendernotice_7.pdf

PDF • 0.20 MB

Work Item Documents

BOQ_1493844.xls

BOQ • 0.25 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Demolishing, Plastering and Finishing
1.01	15.7.4 Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar	1.65	cum	-	-
1.02	13.3.1 20 mm cement plaster of mix:1:4 (1 cement : 4 fine sand)	3.7	sqm	-	-
1.03	10.6.1 Supplying and fixing rolling shutters of approved make, made of required size M.S.laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS:4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25mm M.S. laths with 1.25 mm thick top cover	3.75	sqm	-	-
1.04	13.52.1 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work	9.38	sqm	-	-
2Vehicle Shed
2.01	50.10.1 Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	278.14	kg	-	-
2.02	50.10.2 Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	101.4	kg	-	-
2.03	12.1.3 Providing corrugate G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I.limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/m2	48	sqm	-	-
3Floor Tiles

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Demolishing, Plastering and Finishing

1.01

15.7.4 Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

1.65

cum

1.02

13.3.1 20 mm cement plaster of mix:1:4 (1 cement : 4 fine sand)

3.7

sqm

1.03

10.6.1 Supplying and fixing rolling shutters of approved make, made of required size M.S.laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS:4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25mm M.S. laths with 1.25 mm thick top cover

3.75

sqm

1.04

13.52.1 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

9.38

sqm

2Vehicle Shed

2.01

50.10.1 Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

278.14

2.02

50.10.2 Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

101.4

2.03

12.1.3 Providing corrugate G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I.limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/m2

sqm

3Floor Tiles