PAINTING AND MARKING AT RUNWAY AT AF STN KUMBHIRGRAM

Amount

SCHEDULE 'A' PART-I (B/R PORTION)

Taking down cement plaster on brick walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Preparation of old painted bituminious surfaces of runway etc exc.10 cm width and painting lines, curves, dashes , arrows, letters etc and apply. with one coat of runway marking paint white or golden yellow complete all as specified and directed.

All as per item No 02 above but n. exc. 10 cm width complete all as specified and directed.

Preparation of old bituminous surfaces of runway etc. exceeding 10 cm width and painting lines, curves, dashes, arrows, letters etc.and apply with two coats of runway marking paint white or golden yellow complete all as specified and directed.

Complete removal/Omitting the existing marking as in runway by brushing/scrubbing with wire brush ,paint remover(or) burning off by blow lamps and cleaning with scraps any number of coats, any width(or)girth as required complete all as specified and directed.

Preparation of old painted plastered/concrete surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint (First quality) complete all as specified and directed.

M&L for cold emulsion bitumen (cationic type) over existing runway/Taxi track and connecting road approaching to main runway (Flexible portion) @ 5kg of emulsion per 10 square meter in diluted state as per Manufacturers instruction and applied in thin layer by using mechanical sprayer including preparation of surfaces complete all as specified and as directed by the Engineer-in Charge

M&L for preparation of damaged/ broken cracks found on Runways,Tarmac, Taxiways surface and applying "RUNPHALT" bitumen ropes of size 1/2" to fill 7-14mm wide cracks. Whick is designed to be inserted into the crack or joint cavity first and then melted with direct heat process complete all as specified as per manufacturer instructions and directed by Engineer-in-Charge. (Make: Srijan Systems Pvt Ltd)

M&L for 15mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified and directed.

Preparation of new surfaces on wall and applying two coats of exterior emulsion paint of weather coat camouflage pattern including one coat of emulsion primer all as specified and directed . ( Note :- Camouflage pattern shall be approved by Engr-in-Charge)

M/S RAKHAL KANTI NAG (BID ID -3175860)

R K ENGINEERING ASSEMBLE (BID ID -3177859)

M/s JK Jangid and Company (BID ID -3181662)

M/s Dhruv Enterprises (BID ID -3181605)

PURBANCHAL BUILDERS (BID ID -3181131)

ASSOCIATED BUILDCON LLP (BID ID -3180301)

M/S DEEDAR ENTERPRISE (BID ID -3181331)