Construction of railing (both side) on median and Road safety works from km 256.550 to km 299 (site km 263.160 to km 306.700) on NH 52 in the state of Rajasthan

Providing and erecting a "Thrie" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 85 Cm above road/ ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre- to- centre, 2 m high with 1.15 m below ground level , all steel parts and fitments to be galvanized by hot dip process, all fittings to conform to IS: 1367 and IS: 1364 , metal beam rail to be fixed on the vertical post with a space of channel section 150 x 75 x 5 mm , 546 mm long complete as per Clause 811.3.

Providing & fixing letters/ borders from reflective tape of approved quality of standard width (MORTH Specification Clause 800):P & F Borders (50mm wide)

Providing and fixing 1.2m high GI barbed wire fencing with 1.8m RCC posts 150mmx150mm placed every 3m centre-to-centre founded in M15 grade cement concrete, 0.6m below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 9 horizontal lines and 2diagonals interwoven with horizontal wires ,fixed with GI staples ,turn buckles etc.complete as per MoRTH Specification Clause 808.

Providing and laying marking of center line and stop line etc with hot thermoplastic compound of approved quality with type-1 glass beeds (Table-800-9) , 2.5 mm thick on road/ plain surface, including reflectorising glass beads type-2 (Table-800 10) @ 250 gms per sqm area with special applicator machine, as per IRC:35 including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control involved. The finished surface to be level, uniform and free from streaks and holes as per clause 803 of MoRT&H Specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. (Rumble strip marking 6 Coats i.e 15 mm and 5 mm thickness)

SITC of crystal Control Solar Road warning Blinker system with Solar panel module, without LED module Blinker units charging circuit, suitable SMF Rechargeable Battery (12Volt) complete.

S&F of Aluminium alloy Pressure Die Casted Speed Breakers having Dimenstion L275mm x (W) 150 mm x (H) 30 mm Weight 1600 gm (Per Piece) with 12 Nos Glass beats Reflectors in Silver, Black and Yello Colour Complete as per specification.

Roadways Indicators/ Delineators (As per IRC 79-1981) Supply and Installation of Roadway Indicator! Delineator Post not less than 8000mm High above ground level. The Roadway Indicator! Delineator should be made of 16 Gauge Metal (M.S.) sheet with Rectangular Shape size 25mm X 68mm and Length should be 1000mm. The Roadway Indicator! Delineator should be painted alternately in 15 CM wide strips with Black and white paint both side. On the top of Roadway Indicator! Delineator shall have a Rectangular yellow color Reflector made of PE Plastic with HIP Tape. Plastic Reflector Size should be as: thickness 35mm X width 100mm X length 125mm and the High Intensity Prismatic Tape, color white! red! yellow should be both side as: length 100mm X Width 75mm. The fixing of the roadways delineator by drilling holes on the road and munimum 200mm of Delineator should be fixed inside the hole by filling concrete cement mixed etc and complete direction by engineer.

Raised Payment Marker (Cats Eye): Supplying and Fixing of Molded Shank Raised Pavement Markers made of ABS Moulded body and Polycarbonate Reflective panels with Micro Prismatic Lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 35000 Kilogram tested in accordance to ASIM D 4280 & ASTM D 788. The Height of Road Stud is 20mm, Width 100mm, Length 100mm and minimum reflective area of 13 sqcm on each side.The Strength of detachment of the integrated cylender shank not less than 14+/-2mm (Thickness) and height not less than 30+ 2mm from the body. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing: 90 CM EQUILATERAL TRIANGLE

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing: 60 cm circular