Alappuzha Municipality Project No.588-Electrification of record hall providing computer power plug and LAN connection

Amount

Supply and wiring points according to IS 732-1989 using rigid PVC ivory conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm PVC insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main and continuous earthing with 1.5 sq.mm green coloured FR wire , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular type ROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required.

Single control light point with ceiling rose

Single control light point without ceiling rose

Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator.

Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of light points.

Supply and fixing angle / straight brass lined skirt type, bakelite batten holder with 200mmdia.Alu.shade, 9w LED lamp and giving connection etc as required

Supply, conveyance installation testing and commissioning of pre-wired LED tube light fittings,Philips endura high efficiency BN 108 C 20S CDL white complete with replaceable driver unit and LEd assumbly housed in side the box type fitting with all accessories on wall /ceiling with PVC/TW round block neatly painted to suit the fitting withcompany make symetric bracket mounted accessories ( AC108C MB S ) and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire .

Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.

1200 mm sweep - 5 star rated

Supply and installation of suitable size MS rod type fan clamp as per IS 732 as required.

Supply and providing every additional length of down rod of suitable size heavy gauge GI / WI pipe with 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming in relevant ISS or with original wiring extended including painting as required.

Supply and fixing the following sizes of PVC Conduit conforming to IS 9537 / 1983 part III along with all required accessories on surface including making good the damages etc as required.

20 mm dia light gauge

25 mm dia light gauge

Supplying and clamping the following sizes of corrugated PVC flexible conduit with necessary compression gland with locking ring and check nut at termination pointed using suitable size GI / painted MS saddles spacing not exceeding 60 cms on surface including making good the damages, colour washing etc. as required.

20 mm dia

25 mm dia

Supply and drawing 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

1.50 sq mm 3 run

1.50 sq mm 6 run

1.50 sq mm 9 run

2.50 sq mm 3 run

2.50 sq mm 6 run

4.00 sq mm 3 run

6.00 sq mm 3 run

6.00 sqmm 4run

Supplying & Drawing CAT6 UTP Cable conforming to relevant standards through the existing conduit and giving connections as required

Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (ROHS)

3 module metal box in recess

6 module metal box in recess

9 module metal box in recess

Supply & Fixing the following types/ sizes of front plates on the existing modular boxes. (RoHS)

3 module white/ off-white

6 module white/ off-white

9 module white/ off-white

Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (Group B)

6 A SP 1 way switch

6 A Universal socket

6/16 A socket

16 A SP 1 way switch

Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required

DP enclosure for independent mounting of MCB

8 way single phase double cover (IP 42/43)

12 way single phase double cover (IP 42/43)

4 way (8+12) - three phase double cover (IP 42/43)

Supply and installation of the following accessories suitable for 50 Hz , AC supply conforming to IS 8828-1995/ IEC 60898 of the following current ratings in the existing enclosure and giving connections as required

40 A four pole mini break isolator

40 A double pole mini break isolator

63 A four pole mini break isolator

40 A, 2 pole, 30 mA RCCB

40 A, 4 pole, 30 mA RCCB

6-32A( C curve)

32 A TPMCB

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required.

2.65 mm copper conductor (12 SWG)

supply of superior quality copper earth socket for the following sizes of earth conductor including crimping etc. as required.

2.00 mm (14 SWG)

2.65 mm (12 SWG)

Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required

25 x 3mm brass bolt & nut

Painting letters or figures of the following sizes with enamel paint as identification mark to SB, DB, panel board etc as required

2.50 cm, 4 cm or 5 cm height

Supply & providing PVC 150x100x50 mm box in position as required.

Supply and fixing 1 Metre factory crimped CAT 6 patch cord. Make: D link or equivalent

Supply and fixing 2 Metre factory crimped CAT 6 patch cord. Make: D link or equivalent

Supply and fixing CAT 6 shuttered IO port with 3''x3'' face plate and box. Make: Legrand /Amp/D link or equivalent

Supply and fixing '6 U' wall mount net rack with AC. Distribution box & accessories in position as required.

Supply and fixing 24 port patch panal .legrand or equivalent.

Supply and fixing of 24 port 10/100/1000 semimanage able switch,cisco or it's equivalent make

ATLANTA COMPUTERS

HASAR DIGITAL VIDEO