Development of New A site RO at location BOTH SIDE OF SILCHAR IMPHAL ROAD ON NH37 FROM KM STONE 262 TO 240 KM District Cachar State Assam under Silchar DO

STATEMENT OF CREDENTIALS (STANDARD COMPARATIVE CHART)

E-Tender No:MAC/ERO/37/2025-26/PT-76 ; E-Tender ID: 2026_ERO_188943_1

Subject: Development of new A site retail outlet at location Both side of Silchar Imphal Road on NH 37 from KM Stone 262 to KM Stone 240 District Cachar State Assam under Silchar DO

Instructions for Tenderer: Tenderer MUST fill in below mentioned details and submit along with the Technical bid. (NON-UPDATION OF ANY DETAILS MAY MEAN INCOMPLETE TENDER). Please state "NOT APPLICABLE" in case you have no positive answer. RESPONSIBILITY OF CORRECTNESS OF DETAILS LIES WITH THE TENDERER.

S. No Particulars Bidder's response

A General Information

2 Name of the Bidder

3 Correspondence Address of the Bidder

4 Permanent Address of the Bidder

5 Telephone Nos.

6 Correspondence E-Mail ID

7 Name of Contact Person:

8 Name of the person whose DSC has been used in uploading the tender in e-tender Portal

9 Type of Business Entity Select

10 CIN Number (in case of Company)

11 Name of Proprietor / Partners / Directors of the Firm

B EMD Details NIL

C PRE QUALIFICATION CRITERIA (PQC)

1 SIMILAR WORK CRITERIA

A No. of Completed Work Orders submitted against Similar Work Criteria as per tender Select

B Work Order details for 1st Similar Work Order

a Name of the Service Receiver / Work Order Issuing Party (with Clear Postal Address, Telephone/Fax Nos and E-Mail Address)

b Description of Work (Details of Work and Location)

c Work Order Reference No.

d Work Order Date

e Work Order Value (in Rs.)

f Completion Certificate Reference No. and Date

g Completed Value of Work (in Rs.), as per Completion Certificate

h Date of Completion of Work, as per Completion Certificate

i CA certificate details certifying value of work done along with TDS Certificate (where applicable) or Bank Statement (if applicable)

C Work Order details for 2nd Similar Work Order

a Name of the Service Receiver / Work Order Issuing Party (with Clear Postal Address, Telephone/Fax Nos and E-Mail Address)

b Description of Work (Details of Work and Location)

c Work Order Reference No.

d Work Order Date

e Work Order Value (in Rs.)

f Completion Certificate Reference No. and Date

g Completed Value of Work (in Rs.), as per Completion Certificate

h Date of Completion of Work, as per Completion Certificate

i CA certificate details certifying value of work done along with TDS Certificate (where applicable) or Bank Statement (if applicable)

D Work Order details for 3rd Similar Work Order

a Name of the Service Receiver / Work Order Issuing Party (with Clear Postal Address, Telephone/Fax Nos and E-Mail Address)

b Description of Work (Details of Work and Location)

c Work Order Reference No.

d Work Order Date

e Work Order Value (in Rs.)

f Completion Certificate Reference No. and Date

g Completed Value of Work (in Rs.), as per Completion Certificate

h Date of Completion of Work, as per Completion Certificate

i CA certificate details certifying value of work done along with TDS Certificate (where applicable) or Bank Statement (if applicable)

2 ANNUAL TURNOVER CRITERIA

a Annual Turnover (as per Audited Balance Sheet and Audited P/L Statement)

i FY 2021-22 (in Rs.)

ii FY 2022-23 (in Rs.)

iii FY 2023-24 (in Rs.)

iv FY 2024-25 (in Rs.)

D OTHER MANDATORY DOCUMENTS

2 PF Registration Number

3 GST Registration Number

4 Partnership deed OR Certificate of Incorporation with Memorandum & Articles of Association Select Uploaded

5 Power of Attorney or Undertaking on Sole proprietorship Select Not uploaded

6 Undertakings and Declarations “A, B, C & D” as per Annexure- F (in Digital Excel Sheet in lieu of Declarations) Select

7 Undertakings and Declarations for Holiday Listing as per Annexure- E (in Digital Excel Sheet in lieu of Declarations) Select

8 Undertakings and Declarations for Non Tampering as per Annexure- D (in Digital Excel Sheet in lieu of Declarations) Select

9 Declaration of NCLT/NCLAT/DRT/DRAT/Court Receivership/Liquidation as per Annexure- B (in Digital Excel Sheet in lieu of Declarations) Select

10 Undertakings and Declarations Acceptance of Tender Terms and Conditions as per Annexure- A of Digital Excel Sheet in lieu of Declarations. Select

11 Compliance Certificate regarding bidders from countries which shares a land border with India as per Annexure- C (in Digital Excel Sheet in lieu of Declarations) Select

12 Declaration of Business Transaction Status (Transfer of Ownership) as per Annexure- G (in Digital Excel Sheet in lieu of Declarations) Select

13 Undertaking on No Multiple Bidding as per Annexure- I (in Digital Excel Sheet in lieu of Declarations) Select

14 Undertaking - Bid Stage on Percentage of Local Content (Undertaking on Public Procurement PP-MII) as per Annexure- J (in Digital Excel Sheet in lieu of Declarations) Select

15 Particulars of Bidder Firm as per Annexure- H (in Digital Excel Sheet in lieu of Declarations) Select

16 Format for Bid Security Declaration as per Annexure- K (in Digital Excel Sheet in lieu of Declarations) Select

E OTHER INFORMATIONS No deviation

1 Statement of Credentials in Excel Format submitted or not Select

2 Registration status of firm with respect to GST Select

3 GST Rate as opted (as per IOCL GST Rate against the tendered job is 18%) Select

4 SAC Code for the tendered job (as per IOCL SAC Code against the tendered job is 9954)

5 Income Tax Returns Acknowledgement Filed for last three assessment years (i.e. corresponding financial years):

a. ITR Assessment Year 2021-22 submitted on dd/mm/yyyy

b. ITR Assessment Year 2022-23 submitted on dd/mm/yyyy

c. ITR Assessment Year 2023-24 submitted on dd/mm/yyyy

d. ITR Assessment Year 2024-25 submitted on dd/mm/yyyy

6 Remarks or any other information by the bidder (Bidder to note that conditional offer shall not be accepted)

Percentage BoQ NQ

Select, At Par, Excess (+), Less (-) IOCL Select Excess (+) Less (-) At Par (=) Not Quoted Select Excess (+) Less (-) At Par (=)

Tender Inviting Authority: General Manager I/c (Materials & Contract), Eastern Regional Office

Name of Work: Development of New "A"site RO at location "BOTH SIDE OF SILCHAR IMPHAL ROAD ON NH37 FROM KM STONE 262 TO 240 KM" Cachar, Assam .

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Qty Units Estimated Rate IN Rs. P. Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P GST PERCENT (%) Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 TRANSPORTATION AND INSTALLATION OF 2X20 KL TANKS IN EARTH PIT item_code_1

2 Installation of supplied 20 KL Tank as per specified drawings as per work description but excluding all works of kerb wall and Gasket for manhole including painting / doping with Shalimastic HD as applicable as per specifications complete. RCC works wherever mentioned shall be of grade M20 item_code_2

3 ii) In earth pit with RCC matt raft as per standard Drg. ENG/314 item_code_3 0.000 LS 204924.73 Excess(+) Full Conversion INR

4 Providing and laying dry brick on edge flooring in required pattern with bricks of Class designation 7.5 on a bed of 12 mm mud mortar including filling joints with river sand with common burnt clay non- modular bricks item_code_4 0.000 M2 619.21 Excess(+) Full Conversion INR

5 iv) S/L Threaded A/G HD MS Pipes of 40 mm dia with fittings,Painting item_code_5 0.000 M- 323.47 Excess(+) Full Conversion INR

6 ii) S/L Welded U/G HD MS Pipes of 80mm dia with fittings,doping item_code_6 0.000 M- 1274.28 Excess(+) Full Conversion INR

7 iv) S/L Welded U/G HD MS Pipes of 40mm dia with fittings,doping item_code_7 0.000 M- 668.16 Excess(+) Full Conversion INR

8 iii) 15/20 KL Tank with fittings : 0 - 30 Km item_code_8 0.000 LS 7830.81 Excess(+) Full Conversion INR

9 iv) 15/20 KL Tank with fittings: Add extra for each addtnl. Km above 30km item_code_9 0.000 KM 60.24 Excess(+) Full Conversion INR

10 Chemical Earthing with Copper Bonded Rod suitable for current carrying capacity of 15kA for 1 second - Supply of chemical earthing Cu Bonded High Tensile Low Carbon Steel Rod of dia not less than 17mm electrode complying to UL 467 Requirements & suitable for current carrying capacity of 15kA for 1 second, exothermic welded & 3Mtr long item_code_10 0.000 EA 17322.66 Excess(+) Full Conversion INR

11 ii) 32 x 6 mm G.I.strip item_code_11 0.000 M- 141.19 Excess(+) Full Conversion INR

12 Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: item_code_12 0.000 KG 92.54 Excess(+) Full Conversion INR

13 vii) 1:3:6(1 Cement : 3 Fine Sand : 6 Graded stone aggregate of 40mm) item_code_13 0.000 M3 4285.97 Excess(+) Full Conversion INR

14 Providing Neat cement punning item_code_14 0.000 M2 57.08 Excess(+) Full Conversion INR

15 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture. item_code_15 0.000 M2 161.11 Excess(+) Full Conversion INR

16 i) 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) item_code_16 0.000 M2 242.69 Excess(+) Full Conversion INR

17 i) Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH item_code_17 0.000 M3 5798.9 Excess(+) Full Conversion INR

18 iii) 32SWG SS wire mesh both sides of existing U vent hood 40mm dia item_code_18 0.000 EA 205.04 Excess(+) Full Conversion INR

19 iii) Supply & installation of U type CS bend on vent pipe of 40 mm dia item_code_19 0.000 EA 658.42 Excess(+) Full Conversion INR

20 Supply and fixing Pressure Vacuum Valves of 2 inches for fixing to the Vent Pipes of Underground MS tanks. The valve should be in closed position at normal operating pressure of the tank. The Valve shall be capable for activation at set pressure of 3" ± 0.5 water column to release excess pressure of tank to the atmosphere and open at vacuum of 8" ± 2.0 water column to induce the atmosphere pressure to the tank. PV valve should be diaphragm of dead weight or spring loaded type or combination of any. The weight of the PV valve shall not exceed 2.0 kg. top of the valve shall be provided with cover/cap/ weather hood to prevent the entry of rain water. Valve material,Cover and adopter shall be of Aluminium/polypropylene, diaphragm if used should be of Neoprene, O ring should be of rubber/neoprene, Net/Mesh Pressure puppet ,Vacuum puppet,screws and spring should be of stainless steel. Suitable adopter with one end fitted with valve and the other end should have threading for fixing on Vent pipe of 40mm. PV valves shall have: UL 842 certification of CARB approval or test certificate from any Govt.lab. PV valve shall have PESO approval. item_code_20 0.000 EA 6203.81 Excess(+) Full Conversion INR

21 i) 80 mm dia Aluminium camlock coupling - Male only item_code_21 0.000 EA 868.75 Excess(+) Full Conversion INR

22 i) 50 x 10mm G.I. Strip item_code_22 0.000 M- 369.58 Excess(+) Full Conversion INR

23 CONST.OF DU ISLAND, INSTALLATION OF DUs & ALLIED WORKS item_code_23

24 i) All kinds of Soil item_code_24 0.000 M3 165.38 Excess(+) Full Conversion INR

25 i) Local Fine Sand within grading zone IV item_code_25 0.000 M3 1380.73 Excess(+) Full Conversion INR

26 iv) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 40mm) item_code_26 0.999 M3 6075.33 Excess(+) Full Conversion INR

27 i) Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH item_code_27 0.000 M3 5798.9 Excess(+) Full Conversion INR

28 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_28 0.000 M2 259.06 Excess(+) Full Conversion INR

29 iii) Granite of any colour and shade having Area of slab upto 0.50 sqm item_code_29 0.000 M2 3835.48 Excess(+) Full Conversion INR

30 Supply and Laying of 50 mm dia single wall flexible piping system comprising of Non-metallic HDPE (flexible) pipelines as per IOCL specifications and with manufacturer supplied fittings including all bends, tees, elbows, reducers, end connectors at DU & tank side etc and as required for complete underground piping job. The joints in the pipelines, except the end connections at tanks and dispensers shall be made by electro-fusion welding. The pipes shall be suitable for use with petroleum and ethanol blended fuels. The maximum operating pressure shall be 7Kg/sq.cm. Note: The make of HDPE Pipe should be CCOE approved. Pressure testing shall be done before the final backfilling. The civil works for installation viz. excavation, sand filling & back filling etc. shall be paid seperately. All metallic parts in the piping system shall be grounded as per the requirements of EN14125. item_code_30 0.000 M- 3029.62 Excess(+) Full Conversion INR

31 iii) 3 Core x 1.5 sq. mm. (copper) item_code_31 0.000 M- 104.61 Excess(+) Full Conversion INR

32 iv) 3 Core x 2.5 sq. mm Copper Cable FRLS item_code_32 0.000 M- 138.7 Excess(+) Full Conversion INR

33 vii) 3 Core x 2.5 sq. mm item_code_33 0.000 EA 332.36 Excess(+) Full Conversion INR

34 vii) 3 Core x 2.5 sq. mm item_code_34 0.000 EA 327.83 Excess(+) Full Conversion INR

35 iv) 25 x 6 mm GI strip item_code_35 0.000 M- 118.36 Excess(+) Full Conversion INR

36 iv) 300 mm dia. R.C.C. pipe item_code_36 0.000 M- 785.45 Excess(+) Full Conversion INR

37 iii) 6A to 32A DP MCB item_code_37 0.000 EA 526.77 Excess(+) Full Conversion INR

38 i) 2 product - 4 nozzle MPPs/MPDs item_code_38 0.000 EA 11823.38 Excess(+) Full Conversion INR

39 Installation of Corporation supplied Standard Submersible Turbine Pump on the existing Manhole Cover as per drawing and direction of Engineer in Charge item_code_39 0.000 EA 1576.95 Excess(+) Full Conversion INR

40 vii) Mono/Duo pump/Air Comp/STP/All other pumps - upto 2 nos,0-30 Km item_code_40 0.000 LS 4137.24 Excess(+) Full Conversion INR

41 viii) Mono/Duo pump/Air Comp/STP/All other pumps - upto 2 nos, Add extra for every additional Km above 30km item_code_41 0.000 KM 24.1 Excess(+) Full Conversion INR

42 xi) MPD/MPP pumps upto 2 nos., 0-30 Km item_code_42 0.000 LS 4587.65 Excess(+) Full Conversion INR

43 xii) MPD/MPP pumps upto 2 nos., Add extra for every additional Km above 30km item_code_43 0.000 KM 24.1 Excess(+) Full Conversion INR

44 iii) S/L Welded U/G HD MS Pipes of 50mm dia with fittings,doping item_code_44 0.000 M- 826.04 Excess(+) Full Conversion INR

45 iii) S/W Slipon flanges of 50 mm dia. conforming to IS2062 GrA, ANSI B16.5,Class 150 as per specifications and standard Drg.enclosed herein item_code_45 0.000 EA 677.6 Excess(+) Full Conversion INR

46 iii) S/I Screwed type GM Ball Valve of 50 mm dia item_code_46 0.000 EA 3398.76 Excess(+) Full Conversion INR

47 iv) 5KVA stabilizer item_code_47 0.000 EA 14084.62 Excess(+) Full Conversion INR

48 iii) 500VA CVT item_code_48 0.000 EA Excess(+) Full Conversion INR

49 CONSTRUCTION OF BUFFER STRIP item_code_49

50 i) All kinds of Soil item_code_50 0.000 M3 Excess(+) Full Conversion INR

51 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling & dressing & finishing the top smooth item_code_51 0.999 M- Excess(+) Full Conversion INR

52 iii) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm) item_code_52 0.999 M3 Excess(+) Full Conversion INR

53 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_53 0.000 M2 Excess(+) Full Conversion INR

54 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_54 0.000 M3 Excess(+) Full Conversion INR

55 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_55 0.999 KG Excess(+) Full Conversion INR

56 ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH item_code_56 0.000 M3 Excess(+) Full Conversion INR

57 i) 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) item_code_57 0.000 M2 Excess(+) Full Conversion INR

58 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture. item_code_58 0.000 M2 Excess(+) Full Conversion INR

59 AIR FACILITY item_code_59

60 i) All kinds of Soil item_code_60 0.000 M3 Excess(+) Full Conversion INR

61 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling & dressing & finishing the top smooth item_code_61 0.000 M2 Excess(+) Full Conversion INR

62 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_62 0.000 M2 Excess(+) Full Conversion INR

63 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_63 0.000 M3 Excess(+) Full Conversion INR

64 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_64 0.000 KG Excess(+) Full Conversion INR

65 i) Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH item_code_65 0.000 M3 Excess(+) Full Conversion INR

66 i) 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) item_code_66 0.000 M2 Excess(+) Full Conversion INR

67 i) Local Fine Sand within grading zone IV item_code_67 0.000 M3 Excess(+) Full Conversion INR

68 Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: item_code_68 0.000 KG Excess(+) Full Conversion INR

69 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture. item_code_69 0.000 M2 Excess(+) Full Conversion INR

70 ii) Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) item_code_70 0.000 KG Excess(+) Full Conversion INR

71 iii) 3 Core x 1.5 sq. mm. (copper) item_code_71 0.000 M- Excess(+) Full Conversion INR

72 iii) 6A to 32A DP MCB item_code_72 0.000 EA Excess(+) Full Conversion INR

73 iii) Horizontal air compressor Assembly of 5 HP (160-220 LITRES) including civil works item_code_73 0.000 EA Excess(+) Full Conversion INR

74 Tyre Inflator Supply & installation of Digital tyre inflator which is microprocessor based, automatic air pressure controller with solenoid controlled nozzle for automatic fill and release functions. Complete with weather proof cabinet, 3 digit LED displays with backlight illuminations i.e. one for actual tyre pressure and another for set pressure. Air filter, remote controller, cables, PVC hose pipe and working pressure upto 10bar (Excluding civil work for foundation,etc.) item_code_74 0.000 EA Excess(+) Full Conversion INR

75 UNIPOLE FOUNDATION-GRANITE AND ELECTRICAL WORKS item_code_75

76 xxiv) 3 Core x 2.5 sq. mm Copper Cable XLPE item_code_76 0.000 M- Excess(+) Full Conversion INR

77 vii) 3 Core x 2.5 sq. mm item_code_77 0.000 EA Excess(+) Full Conversion INR

78 Providing and laying class-B 50mm dia GI pipe for cable routing under flooring/ EB post leading including sealing both ends with jute and Bitumen item_code_78 0.000 M- Excess(+) Full Conversion INR

79 i) All kinds of Soil item_code_79 0.999 M3 Excess(+) Full Conversion INR

80 Extra for every additional lift of 1.5m or part thereof in excavation or banking excavated or stacked materials in all kinds of soil item_code_80 0.999 M3 Excess(+) Full Conversion INR

81 i) Local Fine Sand within grading zone IV item_code_81 0.999 M3 Excess(+) Full Conversion INR

82 vi) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 40mm) item_code_82 0.000 M3 Excess(+) Full Conversion INR

83 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_83 0.999 M2 Excess(+) Full Conversion INR

84 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_84 0.999 M3 Excess(+) Full Conversion INR

85 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_85 0.199 KG Excess(+) Full Conversion INR

86 iv) 20mm dia x 900mm long with 100 mm dia x 6 mm thick plate item_code_86 0.000 EA Excess(+) Full Conversion INR

87 iv) 25 x 6 mm GI strip item_code_87 0.000 M- Excess(+) Full Conversion INR

88 YARD LIGHTING AND ELECTRIFICATION item_code_88

89 Kisaan Seva Kendra, Standard drawing No. ENG/IOCL/PDIL-3. List of Componets are: (a) 1 No. MCCB (3P+N) of 63 A, 25 KA with O/L, E/F & S/C Releases for incomer from Electricity Board (b) AC Digital Voltmeter (0-500V) with built in selector switch for incomer from Electricty Board (c) AC Digital Ammeter (0-60A) with built in selector switch for incomer from Electricity Board (d) 1 No. FP, On Load, 63 A, Manually Operated Change over switch suitable for connection of Mains supply and 10 KVA DG Set /5 KW Solar system with required No. of MCCB (63 A ,25 KA, 3P+N) for change over between Mains supply and DG Set /Solar Supply along with 2 Nos 6A , SP, Control MCB with Indicating lamps. (e) 1 No. MCCB (3P+N) of 63A, 25 KA with UV coil O/L , E/F & S/C Releases for incomer from Electricity Board/DG Set/ Solar Supply & 1 No 6A , SP, Control MCB with 3 Nos LED Type (RYB) Indicating lamps (f) 3 Nos 60/5 A CL1 10VA Current Transformers ; PT (50 VA) along with 2 A control fuse link and 1 No. 6A , SP, Control MCB (g) 1 No DP MCB of 40 A, 10 KA for supply of essential loads (h) 1 No Single Phase Contactor(3NO+3NC) for supply to essential loads (i) 1 No MCB DB Hosuing 6 Nos , 16 A, 10 KA DP MCB as outgoings for essential loads (j) 415 V, TP & N, 100 A, Al Bus Bar (k) 4 Nos MCB (3P+N) of 40 A,10 KA for supply of outgoing feeders 1-4 (l) 6 Nos DP MCB of 10 A, 10 KA in Outgoing Feeder -1 (m) 6 Nos DP MCB of 16 A, 10 KA in outgoing Feeder-2 (n) 6 Nos DP MCB of 16 A, 10 KA in outgoing Feeder-3 (o) 6 Nos TP MCB of 16 A, 10 KA in outgoing Feeder-4 (p) Provision for Termination of Solar Power (Up to 10 KW) Incomer to Essential DB in Panel as per requirement of IOCL. item_code_89 0.000 EA Excess(+) Full Conversion INR

90 xviii) 3.5 Core x 50 sq. mm Aluminium Cable FRLS item_code_90 0.000 M- Excess(+) Full Conversion INR

91 xviii) 3.5 Core x 50 sq. mm item_code_91 0.000 EA Excess(+) Full Conversion INR

92 Providing and laying class-B 50mm dia GI pipe for cable routing under flooring/ EB post leading including sealing both ends with jute and Bitumen item_code_92 0.000 M- Excess(+) Full Conversion INR

93 x) 8 S.W.G. Cu. Wire item_code_93 0.000 M- Excess(+) Full Conversion INR

94 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, within premises and lift upto 1.5m item_code_94 0.999 M3 Excess(+) Full Conversion INR

95 vii) 3 Core x 2.5 sq. mm item_code_95 0.000 EA Excess(+) Full Conversion INR

96 vii) 3 Core x 2.5 sq. mm item_code_96 0.000 EA Excess(+) Full Conversion INR

97 i) All kinds of Soil item_code_97 0.000 M3 Excess(+) Full Conversion INR

98 vi) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 40mm) item_code_98 0.000 M3 Excess(+) Full Conversion INR

99 i) Foundations,footings,bases of column item_code_99 0.000 M2 Excess(+) Full Conversion INR

100 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_100 0.000 M3 Excess(+) Full Conversion INR

101 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_101 0.000 KG Excess(+) Full Conversion INR

102 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_102 0.000 M2 Excess(+) Full Conversion INR

103 Supply and fixing of 100 W LED (Light Emitting Diode) light fixture with fittings and accessories for Yard lighting purpose having IP66 protection class with Pressure Die Cast LM6/ADC12/LM24 housing and with toughened glass or UV stabilized polycarbonate cover type of approved make or equivalent as per direction of Engineer-in-charge. The LED driver shall have an in-built high voltage cutoff >= 290 V with power factor of complete fitting greater than 0.90. CCT (Correlated Colour temperature) shall be in the range of 5665 K +/- 355 K as per ANSI standard C78.377, CRI (Colour rendering index) should include all colour range from R1 to R15 and > 70 for outdoor luminaire. LED efficacy shall be greater than 140 lumens/watt @ 350mA drive current. The minimum system lumen efficacy of the luminaire shall be 100 Lumens per Watt. The Surge Protection Device (SPD) should be series type with fail safe, surge protection for minimum 3kV shall be provided. Supply of complete fitting with all accessories as per specification attached and as per direction of engineer in charge. Each lot of fittings shall accompany test certificates LM79/ IS:16106 and reference/ batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of minimum 60 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminaire etc. item_code_103 0.000 EA Excess(+) Full Conversion INR

104 i) For cables 2.5 to 4 sqmm XLPE / AYFY item_code_104 0.000 EA Excess(+) Full Conversion INR

105 i) S/E of 7 Meter high galvanised Octagonal pole with top 70mm (A/F), bottom 130mm (A/F) made up of 3 mm thick plate having a base plate of size 220 x 220 x 12 with single arm 1500mm long bracket arm made up of 48 O.D. pipe with EN 8 grade galvanised foundation bolts and anchor plate on suitable concrete foundation as per standard drawings enclosed herein(Civil & Electrical works shall be paid separately) having fixing arrangement for mounting 2 Nos. of 250W Metal halide luminaries (on opposite sides) item_code_105 0.000 EA Excess(+) Full Conversion INR

106 ii) S/E of 9 Meter high galvanised Octagonal pole with top 90mm(A/F), bottom 158mm (A/F), made up of 3mm thick plate having a base plate of size 285 x 285 x 16 with double arm 1500mm long bracket arm made up of 48 O.D. pipe with EN grade galvanised foundation bolts & anchor plate on suitable concrete foundation as per standard drawings enclosed herein (Civil & Electrical works shall be paid separately) having fixing arrangement for mounting 2 Nos. Of 250W Metal halide luminaries (on opposite sides) item_code_106 0.000 EA Excess(+) Full Conversion INR

107 i) S/E Arm " L " bracket 38/50mm dia on pole, as per specifications and direction of Engineer in charge item_code_107 0.000 EA Excess(+) Full Conversion INR

108 ii) "L" Pole item_code_108 0.000 EA Excess(+) Full Conversion INR

109 iv) 3 Core x 2.5 sq. mm Copper Cable FRLS item_code_109 0.000 M- Excess(+) Full Conversion INR

110 SALES BUILDING & ELECTRIFICATION item_code_110

111 i) All kinds of Soil item_code_111 0.000 M3 229.46 Excess(+) Full Conversion INR

112 Extra for every additional lift of 1.5m or part thereof in excavation or banking excavated or stacked materials in all kinds of soil item_code_112 0.000 M3 82.22 Excess(+) Full Conversion INR

113 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, within premises and lift upto 1.5m item_code_113 0.999 M3 199.76 Excess(+) Full Conversion INR

114 i) Local Fine Sand within grading zone IV item_code_114 0.000 M3 Excess(+) Full Conversion INR

115 iii) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm) item_code_115 0.000 M3 Excess(+) Full Conversion INR

116 40mm Thick Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand:4 stone aggregate of 20mm nominal size) finished with a floating cement coat of neat including cement slurry, but excluding the cost of nosing of steps etc. complete. item_code_116 0.000 M2 453.22 Excess(+) Full Conversion INR

117 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). Item includes providing & mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specifications. Providing & applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes & finally with a piece of cloth lightly soaked in kerosene oil item_code_117 0.000 M2 429.62 Excess(+) Full Conversion INR

118 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_118 0.000 M3 Excess(+) Full Conversion INR

119 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_119 0.000 M3 Excess(+) Full Conversion INR

120 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_120 0.000 M2 259.06 Excess(+) Full Conversion INR

121 iii) Suspended floors,roofs,landings,balconies, access platform and Shelves (Cast in situ) item_code_121 0.000 M2 630.3 Excess(+) Full Conversion INR

122 iv) Lintels, beams plinth beams,girders bressumers and cantilevers item_code_122 0.000 M2 502.06 Excess(+) Full Conversion INR

123 v) Columns, Pillars, Piers, Abutments, Posts and Struts. item_code_123 0.000 M2 667.26 Excess(+) Full Conversion INR

124 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_124 0.000 KG 75.94 Excess(+) Full Conversion INR

125 i) Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH item_code_125 0.999 M3 Excess(+) Full Conversion INR

126 iii) Brick work in Cement mortar 1:4 (1 cement: 4 coarse sand) in superstructure in all shapes & sizes in superstructure ABOVE PLINTH & UP TO FLOOR V LEVEL item_code_126 0.000 M3 Excess(+) Full Conversion INR

127 i) Flooring with size of Tiles 60x60Cm in cement mortar 1:4 item_code_127 0.000 M2 Excess(+) Full Conversion INR

128 iii) Skirting with size of Tiles 60x60Cm in Cement mortar 1:3 item_code_128 0.000 M2 Excess(+) Full Conversion INR

129 ii) 110 mm diameter item_code_129 0.000 M- 277.43 Excess(+) Full Conversion INR

130 i) 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) item_code_130 0.000 M2 242.69 Excess(+) Full Conversion INR

131 iii) 15mm Cement plaster of mix 1:4 (1 cement: 4 fine sand) on rough side of half or single brick wall item_code_131 0.999 M2 280.02 Excess(+) Full Conversion INR

132 Providing and laying dry brick on edge flooring in required pattern with bricks of Class designation 7.5 on a bed of 12 mm mud mortar including filling joints with river sand with common burnt clay non- modular bricks item_code_132 0.000 M2 619.21 Excess(+) Full Conversion INR

133 Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete item_code_133 0.000 M2 178.89 Excess(+) Full Conversion INR

134 Finishing walls with Deluxe Multi surface paint system for interiors & exteriors using Primer as per manufacturers specifications with two or more coats applied on wall @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqm item_code_134 0.000 M2 129.33 Excess(+) Full Conversion INR

135 i) With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) item_code_135 0.000 M2 909.09 Excess(+) Full Conversion INR

136 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately). item_code_136 0.000 M2 Excess(+) Full Conversion INR

137 iii) With float glass panes of 8.0 mm thickness (weight not less than 20kg/sqm) item_code_137 0.000 M2 Excess(+) Full Conversion INR

138 iii) For shutters of doors, windows & ventilators with Powder coated aluminium sections including providing fixing hinges/ pivots & making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) item_code_138 0.000 KG 496.87 Excess(+) Full Conversion INR

139 i) Fixed Glazing with Powder coated aluminium (minimum thickness of powder coating 50 micron) sections item_code_139 0.000 KG 414.99 Excess(+) Full Conversion INR

140 ii) Pre-laminated particle board with decorative lamination on both sides item_code_140 0.000 M2 952.1 Excess(+) Full Conversion INR

141 i) 125 mm item_code_141 0.000 EA 54.25 Excess(+) Full Conversion INR

142 Providing & fixing chrome plated brass100mm mortise latch with one dead bolt with 6 levers & a pair of lever handles with necessary screws etc. complete (best make of approved quality). item_code_142 0.000 EA 623.93 Excess(+) Full Conversion INR

143 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete. item_code_143 0.000 EA 774.49 Excess(+) Full Conversion INR

144 i) With stainless steel cover plate minimum 1.25 mm thickness item_code_144 0.000 EA Excess(+) Full Conversion INR

145 ii) 200x10 mm item_code_145 0.000 EA 81.86 Excess(+) Full Conversion INR

146 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length,jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS 4454 Part-I & M.S. top cover of required thickness for rolling shutters:- 80x1.25mm MS laths with1.25 mm thick top cover item_code_146 0.000 M2 Excess(+) Full Conversion INR

147 Providing and fixing ball bearing for rolling shutters. item_code_147 0.000 EA 381.83 Excess(+) Full Conversion INR

148 Providing Neat cement punning item_code_148 0.000 M2 57.08 Excess(+) Full Conversion INR

149 Providing & fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (minimum thickness of 5 mm) of approved make in all colours,shades except burgundy,bottle green,black of any size as approved by Engineer-in-Charge in skirting,risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade. item_code_149 0.000 M2 937.01 Excess(+) Full Conversion INR

150 Providing & laying Ceramic Glazed floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) jointing with grey cement slurry@ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc. complete. item_code_150 0.000 M2 842.98 Excess(+) Full Conversion INR

151 ii) White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap item_code_151 0.000 EA Excess(+) Full Conversion INR

152 i) 100 mm diameter item_code_152 0.000 M- 288.34 Excess(+) Full Conversion INR

153 i) With Semi rigid pipe of 32 mm dia item_code_153 0.000 EA 79.77 Excess(+) Full Conversion INR

154 v) 40 mm nominal outer dia Pipes item_code_154 0.000 M- 589.87 Excess(+) Full Conversion INR

155 iii) 40 mm nominal bore item_code_155 0.000 EA 616.97 Excess(+) Full Conversion INR

156 ii) 20 mm nominal bore item_code_156 0.000 EA 296.9 Excess(+) Full Conversion INR

157 i) 100x100 mm size P type with common burnt clay bricks of class Designation 7.5 item_code_157 0.000 EA Excess(+) Full Conversion INR

158 i) W.C. pan with ISI marked white solid plastic seat and lid item_code_158 0.000 EA Excess(+) Full Conversion INR

159 iii) Granite of any colour and shade having Area of slab upto 0.50 sqm item_code_159 0.000 M2 Excess(+) Full Conversion INR

160 Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. item_code_160 0.000 EA Excess(+) Full Conversion INR

161 i) One urinal basin with 5 litre white P.V.C. automatic flushing cistern item_code_161 0.000 EA Excess(+) Full Conversion INR

162 ii) 9" dia light duty, make Khaitan or equivalent item_code_162 0.000 EA Excess(+) Full Conversion INR

163 Providing and placing on terrace (at all floor levels) polyethylene water storage tank IS : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank item_code_163 0.000 L- 8 Excess(+) Full Conversion INR

164 xii) Fan Regulator of stepped modular type item_code_164 0.000 EA 544.36 Excess(+) Full Conversion INR

165 iii) 1200 mm sweep item_code_165 0.000 EA Excess(+) Full Conversion INR

166 Supply and Fixing of Discrete LED (Light Emitting Diode) Tube lights of 18 Watt, having IP65 protection class with Pressure Die Cast Aluminium housing & with Polycarbonate diffuser of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-270V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K), CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 100 lumens/watt. The driver shall be of constant volt & constant current type with internal surge protection. Each lot of Fittings shall have serial numbers and accompany LM79 / IS 16106 test reports and reference/batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc. item_code_166 0.000 EA 542.62 Excess(+) Full Conversion INR

167 Supply and Fixing of Discrete LED (Light Emitting Diode) Tube lights of 8 Watt, having IP20 protection class with Pressure Die Cast Aluminium housing & with Polycarbonate diffuser of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-270V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K), CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 100 lumens/watt. The driver shall be of constant volt & constant current type with internal surge protection. Each lot of Fittings shall have serial numbers & accompany LM79 / IS 16106 test reports & reference/batch nos of LEDs & fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc. item_code_167 0.000 EA 423.82 Excess(+) Full Conversion INR

168 iv) 2 x 6 sq mm + 1 x 6 sq mm earth wire item_code_168 0.000 M- 235.9 Excess(+) Full Conversion INR

169 ii) 2 x 2.5 sq mm + 1 x 2.5 sq mm earth wire item_code_169 0.000 M- 158.22 Excess(+) Full Conversion INR

170 iii) 2 x 4 sq mm + 1 x 4 sq mm earth wire item_code_170 0.000 M- 189.47 Excess(+) Full Conversion INR

171 i) 2 x 1.5 sq mm + 1 x 1.5 sq mm earth wire item_code_171 0.000 M- 138.33 Excess(+) Full Conversion INR

172 ii) Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. item_code_172 0.000 EA 741.83 Excess(+) Full Conversion INR

173 iv) 6 module frame item_code_173 0.000 EA 315.49 Excess(+) Full Conversion INR

174 v) 8 module frame item_code_174 0.000 EA 362.86 Excess(+) Full Conversion INR

175 vii) 6A Modular Switch item_code_175 0.000 EA 263.95 Excess(+) Full Conversion INR

176 ix) 6A, 3 Pin Modular Socket item_code_176 0.000 EA 301.9 Excess(+) Full Conversion INR

177 x) 15 A 6 Pin Modular socket item_code_177 0.000 EA 345.28 Excess(+) Full Conversion INR

178 SEPTIC TANK item_code_178

179 i) All kinds of Soil item_code_179 0.000 M3 165.38 Excess(+) Full Conversion INR

180 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_180 0.000 M3 Excess(+) Full Conversion INR

181 iv) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 40mm) item_code_181 0.000 M3 Excess(+) Full Conversion INR

182 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_182 0.000 KG 75.94 Excess(+) Full Conversion INR

183 i) Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH item_code_183 0.000 M3 Excess(+) Full Conversion INR

184 vii) Half brick masonry with common burnt clay F.P.S.(non modular) brick of class designation 7.5 in Cement mortar 1:3 (1 cement : 3 coarse sand) IN FOUNDATION AND PLINTH item_code_184 0.000 M2 725.97 Excess(+) Full Conversion INR

185 i) 12mm Cement plaster of mix 1:4 (1 cement: 4 coarse sand) item_code_185 0.000 M2 251.14 Excess(+) Full Conversion INR

186 iii)150 mm dia. pipe item_code_186 0.000 M- Excess(+) Full Conversion INR

187 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and SW drain pipe 100 mm diameter, 1.8 m long complete as per standard design with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 item_code_187 0.000 EA Excess(+) Full Conversion INR

188 MONOLITH FOUNDATION item_code_188

189 i) All kinds of Soil item_code_189 0.000 M3 165.38 Excess(+) Full Conversion INR

190 Extra for every additional lift of 1.5m or part thereof in excavation or banking excavated or stacked materials in all kinds of soil item_code_190 0.000 M3 82.22 Excess(+) Full Conversion INR

191 Providing and laying dry brick on edge flooring in required pattern with bricks of Class designation 7.5 on a bed of 12 mm mud mortar including filling joints with river sand with common burnt clay non- modular bricks item_code_191 0.000 M2 619.21 Excess(+) Full Conversion INR

192 i) 1:1:2(1 Cement : 1 Coarse Sand : 2 Graded stone aggregate of 20mm) item_code_192 0.999 M3 Excess(+) Full Conversion INR

193 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_193 0.000 M3 Excess(+) Full Conversion INR

194 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_194 0.000 KG 75.94 Excess(+) Full Conversion INR

195 v) 25mm dia x 1000mm long with 100 mm dia x 8 mm thick plate item_code_195 0.000 EA 528.38 Excess(+) Full Conversion INR

196 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_196 0.999 M2 259.06 Excess(+) Full Conversion INR

197 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, within premises and lift upto 1.5m item_code_197 0.999 M3 199.76 Excess(+) Full Conversion INR

198 iv) 3 Core x 2.5 sq. mm Copper Cable FRLS item_code_198 0.000 M- 138.7 Excess(+) Full Conversion INR

199 iv) 25 x 6 mm GI strip item_code_199 0.000 M- 118.36 Excess(+) Full Conversion INR

200 TOILET BLOCK item_code_200

201 i) All kinds of Soil item_code_201 0.000 M3 229.46 Excess(+) Full Conversion INR

202 Extra for every additional lift of 1.5m or part thereof in excavation or banking excavated or stacked materials in all kinds of soil item_code_202 0.000 M3 82.22 Excess(+) Full Conversion INR

203 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, within premises and lift upto 1.5m item_code_203 0.000 M3 199.76 Excess(+) Full Conversion INR

204 i) Local Fine Sand within grading zone IV item_code_204 0.000 M3 Excess(+) Full Conversion INR

205 iii) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm) item_code_205 0.000 M3 Excess(+) Full Conversion INR

206 40mm Thick Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand:4 stone aggregate of 20mm nominal size) finished with a floating cement coat of neat including cement slurry, but excluding the cost of nosing of steps etc. complete. item_code_206 0.000 M2 453.22 Excess(+) Full Conversion INR

207 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). Item includes providing & mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specifications. Providing & applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes & finally with a piece of cloth lightly soaked in kerosene oil item_code_207 0.000 M2 429.62 Excess(+) Full Conversion INR

208 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_208 0.999 M3 Excess(+) Full Conversion INR

209 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_209 0.000 M3 Excess(+) Full Conversion INR

210 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_210 0.999 M2 259.06 Excess(+) Full Conversion INR

211 iii) Suspended floors,roofs,landings,balconies, access platform and Shelves (Cast in situ) item_code_211 0.000 M2 630.3 Excess(+) Full Conversion INR

212 iv) Lintels, beams plinth beams,girders bressumers and cantilevers item_code_212 0.000 M2 502.06 Excess(+) Full Conversion INR

213 v) Columns, Pillars, Piers, Abutments, Posts and Struts. item_code_213 0.999 M2 667.26 Excess(+) Full Conversion INR

214 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_214 0.000 KG 75.94 Excess(+) Full Conversion INR

215 i) Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH item_code_215 0.000 M3 Excess(+) Full Conversion INR

216 iii) Brick work in Cement mortar 1:4 (1 cement: 4 coarse sand) in superstructure in all shapes & sizes in superstructure ABOVE PLINTH & UP TO FLOOR V LEVEL item_code_216 0.000 M3 Excess(+) Full Conversion INR

217 Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Tiles of dark shade pigment using ordinary cement item_code_217 0.000 M2 843.97 Excess(+) Full Conversion INR

218 Painting top of roofs with residual type petroleum bitumen of grade VG10 of approved quality at 17kg per10sqm impregnated with a coat of coarse sand at 60 cudm per 10sqm including cleaning the slab surface with brushes & finally with a piece of cloth lightly soaked in kerosene oil complete. item_code_218 0.000 M2 114.59 Excess(+) Full Conversion INR

219 ii) 110 mm diameter item_code_219 0.000 M- 277.43 Excess(+) Full Conversion INR

220 i) 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) item_code_220 0.000 M2 242.69 Excess(+) Full Conversion INR

221 iii) 15mm Cement plaster of mix 1:4 (1 cement: 4 fine sand) on rough side of half or single brick wall item_code_221 0.000 M2 280.02 Excess(+) Full Conversion INR

222 Providing and laying dry brick on edge flooring in required pattern with bricks of Class designation 7.5 on a bed of 12 mm mud mortar including filling joints with river sand with common burnt clay non- modular bricks item_code_222 0.000 M2 619.21 Excess(+) Full Conversion INR

223 Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete item_code_223 0.000 M2 178.89 Excess(+) Full Conversion INR

224 Finishing walls with Deluxe Multi surface paint system for interiors & exteriors using Primer as per manufacturers specifications with two or more coats applied on wall @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqm item_code_224 0.000 M2 129.33 Excess(+) Full Conversion INR

225 i) With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) item_code_225 0.000 M2 909.09 Excess(+) Full Conversion INR

226 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately). item_code_226 0.000 M2 Excess(+) Full Conversion INR

227 iii) For shutters of doors, windows & ventilators with Powder coated aluminium sections including providing fixing hinges/ pivots & making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) item_code_227 0.000 KG 496.87 Excess(+) Full Conversion INR

228 i) Fixed Glazing with Powder coated aluminium (minimum thickness of powder coating 50 micron) sections item_code_228 0.000 KG 414.99 Excess(+) Full Conversion INR

229 ii) Pre-laminated particle board with decorative lamination on both sides item_code_229 0.000 M2 952.1 Excess(+) Full Conversion INR

230 i) 125 mm item_code_230 0.000 EA 54.25 Excess(+) Full Conversion INR

231 ii) 200x10 mm item_code_231 0.000 EA 81.86 Excess(+) Full Conversion INR

232 Providing Neat cement punning item_code_232 0.000 M2 57.08 Excess(+) Full Conversion INR

233 Providing & fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (minimum thickness of 5 mm) of approved make in all colours,shades except burgundy,bottle green,black of any size as approved by Engineer-in-Charge in skirting,risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade. item_code_233 0.000 M2 937.01 Excess(+) Full Conversion INR

234 Providing & laying Ceramic Glazed floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) jointing with grey cement slurry@ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc. complete. item_code_234 0.000 M2 842.98 Excess(+) Full Conversion INR

235 ii) White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap item_code_235 0.000 EA Excess(+) Full Conversion INR

236 i) 100 mm diameter item_code_236 0.000 M- 288.34 Excess(+) Full Conversion INR

237 i) With Semi rigid pipe of 32 mm dia item_code_237 0.000 EA 79.77 Excess(+) Full Conversion INR

238 v) 40 mm nominal outer dia Pipes item_code_238 0.000 M- 589.87 Excess(+) Full Conversion INR

239 iii) 40 mm nominal bore item_code_239 0.000 EA 616.97 Excess(+) Full Conversion INR

240 ii) 20 mm nominal bore item_code_240 0.000 EA 296.9 Excess(+) Full Conversion INR

241 i) 100x100 mm size P type with common burnt clay bricks of class Designation 7.5 item_code_241 0.000 EA Excess(+) Full Conversion INR

242 i) W.C. pan with ISI marked white solid plastic seat and lid item_code_242 0.000 EA Excess(+) Full Conversion INR

243 iii) Granite of any colour and shade having Area of slab upto 0.50 sqm item_code_243 0.000 M2 Excess(+) Full Conversion INR

244 Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. item_code_244 0.000 EA Excess(+) Full Conversion INR

245 i) One urinal basin with 5 litre white P.V.C. automatic flushing cistern item_code_245 0.000 EA Excess(+) Full Conversion INR

246 ii) 9" dia light duty, make Khaitan or equivalent item_code_246 0.000 EA Excess(+) Full Conversion INR

247 Providing and placing on terrace (at all floor levels) polyethylene water storage tank IS : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank item_code_247 0.000 L- 8 Excess(+) Full Conversion INR

248 Supply and Fixing of Discrete LED (Light Emitting Diode) Tube lights of 18 Watt, having IP65 protection class with Pressure Die Cast Aluminium housing & with Polycarbonate diffuser of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-270V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K), CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 100 lumens/watt. The driver shall be of constant volt & constant current type with internal surge protection. Each lot of Fittings shall have serial numbers and accompany LM79 / IS 16106 test reports and reference/batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc. item_code_248 0.000 EA 542.62 Excess(+) Full Conversion INR

249 Supply and Fixing of Discrete LED (Light Emitting Diode) Tube lights of 8 Watt, having IP20 protection class with Pressure Die Cast Aluminium housing & with Polycarbonate diffuser of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-270V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K), CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 100 lumens/watt. The driver shall be of constant volt & constant current type with internal surge protection. Each lot of Fittings shall have serial numbers & accompany LM79 / IS 16106 test reports & reference/batch nos of LEDs & fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc. item_code_249 0.000 EA 423.82 Excess(+) Full Conversion INR

250 iv) 2 x 6 sq mm + 1 x 6 sq mm earth wire item_code_250 0.000 M- 235.9 Excess(+) Full Conversion INR

251 ii) 2 x 2.5 sq mm + 1 x 2.5 sq mm earth wire item_code_251 0.000 M- 158.22 Excess(+) Full Conversion INR

252 iii) 2 x 4 sq mm + 1 x 4 sq mm earth wire item_code_252 0.000 M- 189.47 Excess(+) Full Conversion INR

253 i) 2 x 1.5 sq mm + 1 x 1.5 sq mm earth wire item_code_253 0.000 M- 138.33 Excess(+) Full Conversion INR

254 ii) Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. item_code_254 0.000 EA 741.83 Excess(+) Full Conversion INR

255 v) 8 module frame item_code_255 0.000 EA 362.86 Excess(+) Full Conversion INR

256 vii) 6A Modular Switch item_code_256 0.000 EA 263.95 Excess(+) Full Conversion INR

257 PAVER BLOCK (1100 SQ M) item_code_257

258 i) All kinds of Soil item_code_258 0.000 M3 165.38 Excess(+) Full Conversion INR

259 i) With material confirming to grade-I (size 75 mm to .075 mm) having CBR value - 30, Thickness as desired item_code_259 0.000 M3 Excess(+) Full Conversion INR

260 Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to .075 mm) to wet mix macadam (WMM) specifications including premixing the material with water at OMC for all leads and lifts, laying in uniform layers with mechanical paver finisher in sub-base/base course on well prepared surface and compacting with vibratory roller of 8 to 10 ton capacity to achieve the desired density, complete as per specifications & directions of Engineer-in- charge item_code_260 0.000 M3 Excess(+) Full Conversion INR

261 ii) M40 grade 80 mm thick Plain finish item_code_261 0.000 M2 Excess(+) Full Conversion INR

262 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_262 0.000 M3 Excess(+) Full Conversion INR

263 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_263 0.000 KG 75.94 Excess(+) Full Conversion INR

264 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_264 0.000 M2 259.06 Excess(+) Full Conversion INR

265 v) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm) item_code_265 0.000 M3 Excess(+) Full Conversion INR

266 APPROACH (100 SQ M) item_code_266

267 i) All kinds of Soil item_code_267 0.000 M3 165.38 Excess(+) Full Conversion INR

268 i) With material confirming to grade-I (size 75 mm to .075 mm) having CBR value - 30, Thickness as desired item_code_268 0.000 M3 Excess(+) Full Conversion INR

269 Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to .075 mm) to wet mix macadam (WMM) specifications including premixing the material with water at OMC for all leads and lifts, laying in uniform layers with mechanical paver finisher in sub-base/base course on well prepared surface and compacting with vibratory roller of 8 to 10 ton capacity to achieve the desired density, complete as per specifications & directions of Engineer-in- charge item_code_269 0.000 M3 Excess(+) Full Conversion INR

270 ii) M40 grade 80 mm thick Plain finish item_code_270 0.000 M2 Excess(+) Full Conversion INR

271 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_271 0.000 M3 Excess(+) Full Conversion INR

272 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_272 0.000 KG 75.94 Excess(+) Full Conversion INR

273 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_273 0.000 M2 259.06 Excess(+) Full Conversion INR

274 v) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm) item_code_274 0.000 M3 Excess(+) Full Conversion INR

275 Culvert item_code_275

276 i) All kinds of Soil item_code_276 M3 229.46 Excess(+) Full Conversion INR

277 Extra for every additional lift of 1.5m or part thereof in excavation or banking excavated or stacked materials in all kinds of soil item_code_277 M3 82.22 Excess(+) Full Conversion INR

278 vi) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 40mm) item_code_278 M3 Excess(+) Full Conversion INR

279 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_279 M3 Excess(+) Full Conversion INR

280 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_280 KG 75.94 Excess(+) Full Conversion INR

281 Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: item_code_281 KG 92.54 Excess(+) Full Conversion INR

282 i) Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH item_code_282 M3 Excess(+) Full Conversion INR

283 i) 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) item_code_283 M2 242.69 Excess(+) Full Conversion INR

284 Providing Neat cement punning item_code_284 M2 57.08 Excess(+) Full Conversion INR

285 Providing and laying dry brick on edge flooring in required pattern with bricks of Class designation 7.5 on a bed of 12 mm mud mortar including filling joints with river sand with common burnt clay non- modular bricks item_code_285 M2 619.21 Excess(+) Full Conversion INR

286 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_286 M2 259.06 Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information