CONSTRUCTION OF TOILET COMPLEX IN CAMPUS OF CIVIL COURT MANIHARI IN DISTRICT KATIHAR

BILL OF QUANTITY

CONSTRUCTION OF TOILET COMPLEX IN CAMPUS OF CIVIL COURT MANIHARI IN DISTRICT KATIHAR

RATE BASE ON CIVIL SOR -01.01.2022

SN SOR Item of Works QTY UNIT RATE AMOUNT TOILETE S/T BORING

1 2.8.1 Earth work in excavation in foundation trenches or drains (not exceeding 1.5m in width or 10sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m. including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m. 36.61 CUM 360.70 13205 17.56 19.05

2 2.28 Supplying and Filling in plinth with local sand and under floors including,watering,ramming consolidating and dressing complete. 53.64 CUM 287.30 15411 52.96 0.68

3 11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l. 109.63 CUM 283.30 31059 100.71 8.92

4 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.1:2:4(1 Cement :2 coarse sand:4 graded stone aggregate 20 mm nominal size). 7.43 CUM 3998.10 29706 6.52 0.91

5 5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement All work puto plinth level 1:1:5:3 (1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size). 10.86 CUM 4688.30 50915 9.00 1.07

6 5.2.2 Reinforced cement concrete work in wall (any thickness), including attached plasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upto floor five level excluding cost of centring, shuttering, finishin and reinforcement. 1:1:5:3 (1 cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size). 1.56 CUM 5670.00 8845 1.56

7 5.3 Reinforced cement conrete work in eams,suspended floors, roofs having slope upto 15, landings, balconiec, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforement with 1:2:4 (1cement:2coarse sand:4 graded stone aggregate 20 mm nominal size). 9.74 CUM 5335.90 51972 9.74

8 6.1.12C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:4 (1cement: 4 coarse sand) etc all complete. 14.15 CUM 5116.30 72396 5.30 8.85

9 6.1.14C+6.3C Brick work with fly ash bricks as per IS:12894 (2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) Extra tor Brick work in superstructure above plinth level upto floor V cum etc all complete. 23.76 CUM 5765.20 136981 23.76

10 5.9 Centring and shuttering including strutting, propping etc. and removal of form for. 0.00 SQM 0

11 5.9.1 Foundations, footings, bases of columns etc. for mass concrete. 27.00 SQM 211.60 5713 24.22

12 5.9.6 Columns,Pillars, Piers, Abutments, Posts and Struts. 12.34 SQM 494.40 6101 12.34

13 5.9.5 Lintels, beams, plinth bams, griders, bressumers and contilevers. 67.35 SQM 404.70 27256 66.62 0.73

14 5.9.3 Suspended floors, roots, landings, balcnies and access platform. 52.11 SQM 437.50 22798 43.68 8.43

15 5.9.16.1 Edges of slabs and breaks in floors and walis-Under 20 cms wide 12.20 SQM 130.3 1589 12.20

16 5.9.19 Weather shade,Chajjas, corbels etc. including edges. 3.62 SQM 550.90 1994 3.62

17 5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. 0

18 5.22.7A Thermo-Mechanically Treated bars TMTC-500-8mm dia. 775.06 SQM 94.50 73243 746.03

19 5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm dia. 518.06 SQM 92.60 47972 426.30 75.17

20 5.22.7C Thermo-Mechanically Treated bars TMTC-500-12mm dia. 996.50 SQM 90.80 90482 959.18

21 13.11.4 Cement plaster in course sand 12 mm cement plaster of mix:1:6 (1 cement:6 coarse sand) etc all complete. 103.36 SQM 141.50 14625 87.00 16.36

22 13.12.4 Cement plaster in course sand 15 mm cement plaster of mix:1:6 (1 cement:6 coarse sand) etc all complete. 82.95 SQM 162.80 13504 82.95

23 13.17 15 mm cement plaster 1:3 (1 cement: 3 coarse sand ) finished with a floating coat of neat cement on the rough side of single or half brick wall etc all complete. 120.18 SQM 203.60 24469 74.09 46.09

24 13.24.2 6 mm cement plaster to ceiling of mix :1:4(1 cement: 4 coarse sand) etc all complete. 47.34 SQM 125.60 5946 47.34

25 13.48.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two or more coats applied on walls @ 1.25 ltr/10sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm. 217.29 SQM 117.30 25488 217.29

26 11.37 Providing and laying Ceramic glazed floor tiles 300x300mm (thickness be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in colours such as white,Ivory,Grey,Fume Red,Brown,laid on 20mm thick Cement motar 1:4(1cement:4coarse sand) including pointing the joints with white cement and matching pigment etc., complete. 26.43 SQM 686.80 18152 26.43

27 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 58.30 SQM 795.00 46349 58.30

28 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding. 30.00 SQM 144.50 4335 30.00

29 26.86.3 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm, modulus of elasticity 900 N/mm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for Separately). 35.82 METRE 788.20 28233 #REF!

30 26.87.1 Providing and fixing factory made single extruded WPC {Wood Polymer Composite} solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 Suspension Grade), calcium carbonate and natural fibers {wood powder/ rice husk/wheat husk) and non toxic additives {maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800N {Face) & 900N (Edge), minimum compressive strength 50 N/mm, modulus of elasticity 850 N/mm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In• Charge. {Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 12.69 sqm 3866.50 49066

31 21.3.1 providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness(weight not less than 10kg/sqm) 1.86 SQM 809.30 1505 1.86

32 13.94.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture 15.46 SQM 116.50 1801 15.46

33 8.2.2.1 providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement:4coarse sand), joints treated with white cement, mixed with matching pigment,epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 4.93 SQM 4242.90 20917 4.93

34 11.19.1 chequered terrazo tiles 22 mm thick with marble chips of sozes upto 6 mm in floors jointed with neat cement slurry mixed with pigement to match the shade of the tiles, including rubbing and polshing complete on 20mm thick bed of cement mortar 1:4(1 cement:4 coarse sand). 37.36 SQM 970.20 36247 37.36

35 10.36 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners,stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). 72.85 SQM 546.80 39835 72.85

36 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. 2.00 EACH 4470.90 8942 2.00

37 17.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid. 4.00 EACH 5504.30 22017 3.00

38 17.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. 5.00 EACH 2764.40 13822 5.00

39 17.5.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:One urinal basin with 5 litre white P.V.C. automatic flushing cistern. 2.00 EACH 6469.00 12938 2.00

40 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931. 8.00 EACH 434.20 3474 8.00

41 18.52 Providing and fixing C.P. brass stop cock (concealed) of standard design & of approved make conforming to IS:8931. 8.00 EACH 594.80 4758 8.00

42 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate Eureopean type W.C. of quality and make as approved by Engineer - in - charge. 5.00 EACH 299.40 1497 5.00

43 17.28.2.1 ProvidingandfixingP.V.C. wastepipeforsinkorwashbasinincluding P.V.C. waste fittings complete. Flexible pipe 40mm 7.00 EACH 104.40 731 7.00

44 17.31 Providingandfixing600x450mmbevelededgemirrorofsuperiorglass(ofapprovedquality)completewith6mmthickhar oardgroundfixed to wooden cleats with C.P. brass screws and washers complete. 5.00 EACH 1068.50 5343 5.00

45 17.33 Providing and fixing 600x120x5mmglass shelf with edges round off,supported on anodised aluminiumangle frame withC.P. brass bracketsandguardrail complete fixedwith40mmlongscrews, rawl plugs etc., complete. 5.00 EACH 713.30 3567 5.00

46 17.34.1 Providing and fixing toilet paper holder :C.P. brass 5.00 EACH 550.70 2754 5.00

47 17.70.2 Providing and fixing PTMT Bottle Trap for Wash basin sink.Bottletrap38mmsinglepiecemouldedwithheightof270 mm,effectivelengthof tailpipe260mmfromthecentreof thewastecoupling,77mmbreadthwith25mmminimum water seal, weighing not less than 263 gms 5.00 EACH 325.10 1626 5.00

48 17.71 ProvidingandfixingPTMTliquidsoapcontainer109mmwide,125mhighand112mmdistancefromwallofstandardshapewithbracketof thesamematerialswithsnap fittingsof approvedqualityandcolour, weighing not less than 105 gms. 5.00 EACH 146.30 732 5.00

49 17.73.1 Proviing & fixing 450 mm long towel rail with total length of 495 mm,78 mm wide and effective height of 88 mm, weighing not less than 170 gmsProvidingandfixingPTMTliquidsoapcontainer109mmwide,125mmhighand112mmdistancefromwallofstandardshapewithbracketof thesamematerialswithsnap fittingsof approvedqualityandcolour,weighing not less than 105 gms. 5.00 EACH 397.30 1987 5.00

18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.

50 18.9.2 20 mm nominal outer dia Pipes 25.00 METRE 205.30 5133 25.00

51 18.9.3 25 mm nominal outer dia Pipes 25.00 METRE 294.70 7368 25.00

52 18.9.4 32 mm nominal outer dia Pipes 15.00 METRE 359.10 5387 15.00

53 12.78.2 Providing and fixing on wall face unplastidsed-PVC(working 15.00 METRE 257.50 3863 15.00

54 12.80.2 Providing and fixing on wall face unplasticised -PVC molded fittings/ 5.00 EACH 182.72 914 5.00

55 12.79.1.2 Providing and fixing on wall face unplasticised -PVC molded 5.00 EACH 120.00 600 5.00

56 19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry 1.00 EACH 33603.40 33603 1

57 18.37.1 Constructing masonry Chamber 60x45x50 cm inside, in brick work in 1.00 EACH 6849.90 6850 1.00

58 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 1000.00 LITRE 9.70 9700 1000.00

59 18.42 Boring with 100 mm diameter casing pipe for hand pump / tubewell, in all soils except ordinary hard rocks requiring blasting, including removing the casing pipe after the hand pump / tube well is lowered and tested Up to 6 metres depth 0

(II) Beyond 6.0 M to 12.0 M= 6.00 METRE 416.10 2497 6.00

(III) Beyond 12.0 M to 25.00 M= 3.00 METRE 484.10 1452 18.00

60 24.3.1 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths,as per direction of Engineer -incharge.100 mm nominal size dia 0

63 8640 40 mm Suetion Pipe 10.00 METRE 230.00 2300 10.000

64 24.14.1 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 100 mm clamp 0

65 24.15.1 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 100 mm dia 1.00 EACH 228.30 228 1.00

66 24.12 Development of tube well in accordance with IS : 2800 (partI) and IS: 11189, to establish maximum rate of usable wateryield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully develo ped, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.tubewell as per IS:2800 (part I). 100 mm dia 5.00 HOURS 916.80 4584 5.000

67 24.13.1 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete forborewell of: 100 mm dia 1.00 EACH 189.70 190 1.000

68 18.17.2 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore. 0.00 0

69 18.19.2.1 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 32 mm nominal bore 2.00 EACH 677.60 1355 2.000

70 18.18.3 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore 2.00 EACH 399.20 798 2.000

71 Carriage of materials

72 Extra cost of materials

TOTAL SOR ITEM= 1436150.00

AFTER FACTOR-0.982 1410299

73 N/S Supply Installation Testing and Commisioning Submersiable Motor 1 H.P. do all this complete job for E.I/ 1.00 EACH 8,850.00 8850

74 N/S Suplying & instalation Iper Changing station 1.00 EACH 25000.00 25000

75 N/S Suplying & instalation of Sanitry vening machine 1.00 EACH 15000.00 15000

G. TOTAL= 1534741

EXECUTIVE ENGINEER