Loading…
Loading…
Tender Value
₹1.5 Cr
EMD Value
₹3.0 L
Closing Date
15 Sept 2026, 3:30 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
SRDSTE/RJT
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet
The tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of tender. NOTE: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs. 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered atleast 5 years prior to the date of opening of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate
Definition of similar nature of work: - Any work in connection with signalling installation and which includes relay wiring or any work which includes provision of Power Supply equipments. OR Any telecom work which includes wiring of indoor equpment.
18 conditions · 4 needing a document upload
1.EMD/Bid security is deposited as per Clause 5 of Part I ""regulations for tenders and contract " of tender document. 2. EMD need to be deposited online on www.ireps.gov.in. 3. For the tenders costing upto 50 Lakhs: - No technical and financial credentials required but firm's documents and any other mandatory documents which are demanded in tender are require to be submit at the time of bidding. 4. tender having value more than 50 Lakhs: - Financial and technical credentials required as per GCC applicable and firm's documents and any other mandatory documents which are demanded in tender are require to be submit at the time of bidding.
1. If Tenderer is sole proprietor: Affidavit on Stamp paper of appropriate value declaring that his/her concern is a Proprietary concern or any other documents such as GST Certificate, PAN Card of firm Name etc. is to be submitted. 2. If Tenderer is partnership firm: Notarized partner ship deed Original / Notarized power of attorney. 3. If Tenderer is JV/Limited Company: Copy of Memorandum and Articles of Association of the company. Power of Attorney (duly registered/notarized as per prevailing law) by the company authorizing the person to do/act on behalf of the company. 4. If Tenderer is Company: Copies of MOA (Memorandum of Association) & AOA (Articles of Association) of the company. Power of attorney duly registered/notarized by the company in favour of the individual signing the tender on behalf of the company. Resolution of Board of directors in regards of approving Power of attorney issued. 5. If Tenderer is Society: Attested copy of the certificate of registration. Deed of formation. Power of attorney in favour of the tender signatory. 6. Copy of PAN number and TIN number.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Rajkot division: Signalling work in connection with Reliability improvement of LC gates by Provision of IPS at 17 nos. of LC Gates over Rajkot Division.
DRM-RJT-26-27-SnT-E-18~WR
DRM-RJT-26-27-SnT-E-18
Open
Works - General
8 Months
Rajkot, Gujarat
₹0
₹3.0 L
21 Aug 2026
21 Aug 2026
1 Sept 2026
96 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,31,75,257.72 | ||
| — | 40.00 | — | — | ||
| Medium Class G.I. Pipes to IS : 1239 (Pt.I)-2004 or latest ; 100mm dia. ( int. dia) 3.65 mm+/- 10% thick with coupling. G.I. pipes shall have ISI mark on it and contractor should submit manufacturer's test certificate of G.I. pipes. | — | — | — | 25,751.6 | |
| — | 1200.00 | — | — | ||
| Disconnect Terminal Block, Screw less type, as per RDSO Spec. No. RDSO/SPN/189/2004. With latest amendments.Disconnect Terminal Block, Screw less type, 4-wire front entry (Two in-put & Two out-put) The colour will be decided by Engineer - in - Charge. (Preferably In Blue, Red & Grey Colors in the ratio of 1:2:3) | — | — | — | 74,148 | |
| — | 120.00 | — | — | ||
| Supply of End plate for above item (I) 2.5mm/0.091 in thick as per site requirement. | — | — | — | 1,380 | |
| — | 120.00 | — | — | ||
| Supply of End Stopper for above item (I) 10mm/0.0394 in width as per site requirement. | — | — | — | 1,380 | |
| — | 20.00 | — | — | ||
| Supply of Carrier Rails for above 35mm x 7.5mm, 1mm/0.039 in thickness un-slotted type as per site requirement. | — | — | — | 2,417.6 | |
| — | 100.00 | — | — | ||
| Indicative type Fuse base/ holder with cap, suitable to G type fuse of capacity 0.63A - 3.0A. (System, Rapid, Malnad or RBCO make or similar). | — | — | — | 5,717 | |
| — | 100.00 | — | — | ||
| Indicative type Fuse suitable to G type fuse base/holder of capacity 0.63 A - 3.0 A (System, Rapid, Malnad or RBCO make or similar). | — | — | — | 2,087 | |
| — | 2.00 | — | — | ||
| Cable termination racks as per Drg. no. CSTE 5004, 5005, 5006 complete along with fitting arrangements and also with arrangement for fixing four 8-way terminal strips/ Screw less terminals on each row having 16 such rows. Supply of 8 way terminal strips/ Screw less terminals not covered under this item. Cable termination rack shall be Powder Coated. | — | — | — | 51,235.64 | |
| — | 12.00 | — | — | ||
| Earth Electrode as per Drg. No. CSTE / 6091. | — | — | — | 45,262.56 | |
| — | 2.00 | — | — | ||
| SS AC Box HALF, DRG No. DRM/SG/945 with Rev.2 or Latest (Fabricated of 2.5mm SS Sheet, Fixed Type) | — | — | — | 1,26,840 | |
| — | 4.00 | — | — | ||
| SS AC Box FULL, DRG No. DRM/SG/948 With Rev.2 or Latest (Fabricated of 2.5mm SS Sheet, Fixed Type) | — | — | — | 2,92,016 | |
| — | 6.00 | — | — | ||
| Digital Multimeter of Fluke 287 lndustrial, True RMS with temperature, Analog bar graph, Digital display, Backlight, 1000V AC/DC, measure up to 10A, 20A for up to 30 second or Superior. | — | — | — | 1,34,484.6 | |
| — | 2.00 | — | — | ||
| Supply of digital Earth tester 4 Terminal for measurement of Earth resistance as per technical specifications . | — | — | — | 10,487.84 | |
| — | 2.00 | — | — | ||
| Megger 100V to 500V X 20 mega ohms as per specification make: Fluke model No 1507,Motawani and other similar | — | — | — | 78,665.88 | |
| — | 6.00 | — | — | ||
| Mini AC/DC Low Current Clamp Meter as per Specn. High Sensitivity, Miniature type Clamp, Resolution of 0.1 mA for AC,1 mA for DC Current, Measurement range 0-20 A MakeKEW, Fluke OR SIMILAR. | — | — | — | 2,38,914 | |
| — | 12.00 | — | — | ||
| Supply, Transportation, Testing and Commissioning of SMPS based Integrated Power Supply System for IBS and LC Gate in RE Section as per RDSO Spec No. RDSO/SPN/165/2023 Ver. 4.0 Amdt. 1 or latest and DRG. No. CSTE 6295 SHT. 3 OF 4. along with Battery Set (55+5) of 110 V/200 AH. | — | — | — | 1,06,55,400 | |
| — | 17.00 | — | — | ||
| Ferro resonant type automatic AC voltage regulator 5 KVA capacity input 160-270V, output 230Vas per RDSO Specn IRS S:74/89 with amendment-6 or latest. | — | — | — | 11,43,420 | |
| — | 2500.00 | — | — | ||
| Rubber Mat for Power Equipment room. ( 5mm thick-RE fit) | — | — | — | 2,85,650 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
DRM-RJT-26-27-SnT-E-18-GCC2022.pdf
ATTACHMENT
ACS12andAllmerged.pdf
ATTACHMENT
IPS Drawing
ATTACHMENT
SpecialconditionofcontractForIPSwork.pdf Special Condition of Contract
ATTACHMENT
PCCLforIPS.pdf
ATTACHMENT
RDSOTANforearthingBondingwork.pdf
ATTACHMENT
IPSWRNEWDRAWING-CSTE6295Total4sheets-08April2026.PDF
ATTACHMENT
SpecialconditionofcontractForIPSwork.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].