COMPREHENSIVE BR REPAIRS OF CERTAIN BLDGS IN UNIT 495 AND REPAIR TO ROOF CEILING PLASTER TILING FLOORING HARDSTANDING IN UNIT 763 AND UNIT 495 UNDER AGE BR WEST AT GE DEHU ROAD

Amount

M&L for Demolition of brick work or stone/boulder masonry , built in cement mortar including all quoins, arches, pillars etc ,but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge.

M & L for brickworks with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6

M & L for 15 mm thick cement plaster on fair faces of brick work in cement mortar 1:4 including plastered surface shall be even and smooth without using extra cement finish completed

M&L for rendering cement plaster 10 mm thick in CM 1:6 on fair faces of brick walls finished even and smooth w/o using extra cement complete all as specified and as directed.

M & L for Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper on walls over a coat of alkali resistant primer on plastered surfaces complete including 3mm thick wall care putty complete all as specified and as directed.

M&L two coats of premium acrylic smooth exterior paint with silicone additives to new plastered surfaces of walls including preparation of surfaces as per manufacturers instruction all as specified and directed by Engineer-in-charge.

M&L for Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M & L non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete.

M & L non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete.

M & L for Non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat 10 mm thick in CM 1:4 all as directed.

M&L full body Vitrified coloured Ceramic tiles of light colour shade 8 to 10 mm thick (square/rectangular) polished, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6, complete all as specified and directed.

M&L full body Vitrified coloured Ceramic tiles of light colour shade 8 to 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, as in skirting to match the vitrified ceramic coloured light shade floor tiles etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10 mm thick backing or rendering coat of plaster in cement mortar 1:4, complete all as specified and directed.

M&L Glazed ceramic coloured tiles of size 450 mm x 300 mm and 7 mm thick of approved colour as in vertical surfaces such as skirting, dado and risers to steps etc., set and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 10mm thick backing coat in cement mrotar1:4 including triangular filleting in cement mortar 1:4 on top of skirting/dado etc complete all as specified and directed.

M&L for Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid and bedded and jointed in cement mortar complete all as specified and as directed.

M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as specified.

M&L for Taking down chowkhats or with shutter (without taking off shutter from the frames) & removing from site n exc. 1.5 Sqm each complete all as specified and as directed

M&L for Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed

S&F aluminium powder coated window sliding type (3 track) with frame size100x35x1.2mm and shutter 39.40x17.70x1.2mm with two glass shutter & one mesh shutter incl necessary jointing cleats glazing clips, rubber packing,and locking arrangement powder coated aluminium snap beading screws including 3mm plain float glass & 0.36 mm dia and 1.4 mm width of aperture, Stainless Steel wire mesh, fittings etc complete all as specified and as directed.

S&F aluminium decogrill 10mm thick with necessary channels,frame and clips, complete all as specified and as directed. Make- Decogrill DG104.

Supply & Fixing PVC door frame (50x47) mm made out of plain colour5 mm thick PVC Sheet re in forced with MS Square Tube, supplying & fixing in opening as per specification & drawing

Supply and fixing Factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

M&LFlush shutter solid core 30 mm thick with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed

S& F 100 mm But hinges, stainless steel, bright polished and fixed, type B-11 all as specified and directed

S&F 250 mm Aluminium alloy, anodised , sliding door bolt with hasp and staple (BOLT TYPE) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.

S&F 150mm long Aluminium anodized, barrel tower bolt of extruded section.

S&F 150mm long Aluminium handles cast type anodised

S & F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples to wooden/steel shutters all as directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless-steel wire staples .

M&L for preparation of surfaces and applying applying two coats of synthetic enamel paint on new wooden surfaces over a coat of pink primer.

Welding in repairs exc 2.5 cm & n exc 5 cm in length & thickness of metal n.exc 6 mm all as specified and directed by Engr-in-charge

S&F in repairs floor door stopper, with 150 mm long of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor.

Dismantling water tanks and removing to store of capacity exc. 250 litres & n.exc 500 litres.

S & F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe spouts for connecting inlet, outlet, over flow and washout pipes all as specified and as directed.

S & F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore and fixed (minimum weight 210 gms) complete all as specified and as directed.

S & F in repairs 15 mm dia stop valves cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union fixed in repair for 15 mm dia GI pipe all as specified and as directed.

S&F in repairs 15 mm dia bib taps fancy type long body chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm dia pipe complete all as specified and as directed.

S & F in repairs 15 mm dia pillar taps fancy type chromium plated with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe complete all as specified and as directed.

S&F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15 mm dia

S&F in repair Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed by Engineer-in-Charge

M&L for Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc. from existing water tanks of capacity upto 500 litres of any type and in any position and writing the date of cleaning complete all as specified and directed.

M&L for Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc. from existing water tanks of capacity exc. 500 litres and not exc. 1000 litres of any type and in any position and writing the date of cleaning complete all as specified and directed.

S&F as in repairs PVC low/high level flushing cistern white 10 litre capacity incl PVC inlet pipe with brass check low level full both sides along with PVC flush pipe 32mm dia jointed to WC and handle incl brackets all as directed.

S/F in repairs Vitreous china wash basin white flat back size 550 x 400mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand along with 32mm dia CP waste coupling and PVC waste pipe complete all as directed.

S&F in repair Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.

S & F in repairs for PVC connection pipe 15mm dia with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repairs plastic water closet seat cover, black / White closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device.

S&F in repairs Grating round 100 mm size of PTMT (Minimum weight 25gms.) complete all as specified and as directed.

S&F in repairs vitreous china squatting pan Orissa pattern of size 580x440 mm white with integral foot rest any pattern complete all as specified and directed.

Supply and fix in repairs for vitreous china EWC of white colour with plastic water closet seat closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, including connection to drain or out going pipe and to PVC flushing pipe, antisyphonage pipe and all necessary fittings etc complete all as specified and as directed.

M&L for Taking down steel doors of garage exceeding 4 sqm and not exceeding 6sqm in each and making good of damaged pintel Hinges steel handles by necessary welding and refixing in the same opening after applying one coat of synthetic enamel paint after preparing the over complete door surfaces all as specified and directed.

M&L for Dismantling/ taking down AC waste / vent pipes fixed to walls with all fittings/ accessories 110/75 mm dia pipes all as specified and directed by Engineer-in-Charge

S&F in repair PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls, or laid in trenches bore of pipe 110 mm dia complete all as specified and directed by Engineer-in-Charge.

S&F in repair 110 mm dia PVC (SWR) bends, any radius with access door complete all as specified and directed by Engineer-in-Charge.

S&F in repair 110 mm dia PVC (SWR) branch piece (Single Y) equal or unequal complete all as specified and directed by Engineer-in-Charge.

S&F in repair 110 mm dia PVC (SWR) branch piece double, (Double Y) equal or unequal complete all as specified and directed by Engineer-in-Charge.

S&F in repair 110 mm dia PVC (SWR) vent cowl complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC (SWR) pipes 75 mm dia ,single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC (SWR) bends any radius, 75mm dia pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC (SWR) branch piece, single (single Y) equal or unequal,for 75mm dia pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC (SWR) branch piece, double (double Y), equal or unequal,for 75mm dia pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair 75 mm dia PVC (SWR) vent cowl complete all as specified and directed by Engineer-in-Charge.

M&L for Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar for 150 mm dia pipes, all as specified and directed by Engineer-in-Charge.

M&L for reinforced cement concrete pipes class NP-2 , laid in trenches & jointed complete with collars, dia of pipe 150 mm complete all as specified and directed by Engineer-in-Charge.

M&L concrete bed to drain pipe of 150 mm dia including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate complete all as specified and as directed by engineer-in-Charge

M&L for Demolition of cement concrete (reinforced )as in manholes cover complete all as specified and directed by Engineer-in-Charge.

M&L for precast cement concrete (1:2:4) type B-1 (20mm graded stone agg) as in cover slabs for man holes, set and jointed in CM (1:4) complete all as specified and directed Note:- Reinforcement shall be measured and paid separately.

M&L for mild steel TMT bars 6 to 8 mm and over dia cut to length, bent to shape required incl cranking, bending, hooking ends & binding with & incl mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-Charge.

M&L for Demolition of cement concrete ( unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M & L for 75 mm thick PCC type D-2 1:4:8 (40 mm graded aggregate) as in sub base for tiling complete all as specified and as directed

M & L for Chequered cement concrete tiles of 20 cm x 20cm x 25 mm thick with grey cement and pigment, set and jointed in neat cement slurry in floors over and including 15 mm thick screed bed or bedding layers in cement mortar 1:6 complete all as specified and as directed.

M & L for 60mm thick precast concrete interlocking paver block rubber moulded any shape and size confirming to IS 15658-2006 of M-35 Grade with grey cement and pigment over and including 25 mm thick sand cushioning complete all as specified and as directed.

M&L preparation of old painted wooden surfaces of any description not exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed by Engineer-in-Charge.

S&F 20 mm dia stainless steel medium grade curtain rod fixing in brackets including stainless steel brackets (02 Nos bracket) each in door/windows with side knob as specified and directed complete including fixing in any opening.

M&L for preparation of old decorated surfaces of walls and applying one coat of premium acrylic smooth exterior paint with silicone additives on external surfaces of wall as per manufacturers instruction all as specified and directed by Engineer-in-charge.

M&L for Dismantling boarding of any description, fixed in any position all as specified and directed by Engineer-in-charge.

M&L for Dismantling timber fillets of section n.exc. 40 sqm in frame for wall panelling as unframed work complete all as specified and directed by Engineer-in-charge.

M&L for clean sawn second class hardwood in scantling. Complete all as specified and directed by Engineer-in-charge.

M&L for 9mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and directed by Engineer-in-charge.

M&L Decorative laminate type-I 1.5 mm thick of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions

M&L for 2nd class hardwood bullnose fillets, splayed chamfered or round or one edge or face, wrought secured with nails area exc. 6 & n.exc. 13 Sqcm. complete all as specified and directed by Engineer-in-charge.

M&L for French polishing on surfaces of description, width or girth including cleaning and preparing the surface including a coat of wood either on new works with two or more coats. Complete all as specified and directed by Engineer-in-charge.

S&F medium density particle board, 25mm thick, flat pressed three layer or multilayer and graded (grade I or grade II) bonded with BWP adhesive , fixed with screws to timber frame work/steel frame work for kitchen cabinet etc complete all as specified

M&L for Dismantling wall & ceiling boards(fibre pulp insulation etc) or insulation boards/ slabs/blankets, any thickness including cover fillets complete all as specified and as directed.

S&F Aluminium anodised snap grid false ceiling, for insulation and acoustic purpose, using standard aluminium sections of size 35.60 mm x 23.60 mm x 1.60 mm as in wall angle, 23.60 mm x 23.60 mm x 1.60 mm as in Main/ Cross Tees and 26.00 mm x 26.00 mm x 1.60 mm angles for grid of size 605 x 605mm suspended with 4mm dia. GI wire at intervals n.exc. 600mm centre to centre and fixed to roof truss with suitable size MS hooks and fastening bolts etc. from sloping/flat roof including 12 mm thick Gypsum ceiling boards of size 600mm x 600mm fixed with clips to aluminium snap grid including preparation of exposed surfaces of ceiling boards and applying two coats of acrylic emulsion distemper over a coat of primer all as specified and as directed.

M/L for taking out existing water proofing treatment including cement plaster(any no of layers) on roof surfaces, cleaning the surfaces and removing the debris outside MOD land and applying water proofing treatment as under :-(a) Rendering 10mm thick in CM 1:4 on concrete surfaces / slabs with admixture of integral water proofing compound as per manufacture instruction by weight of cement, levelling to receive water proofing treatment (WPC shall be measured & paid separately) (b) Apply one coat of oil bituminous primer @ 0.20 kg/Sqm over concrete surface. (c) Laying 3mm thick APP Polymerised modified membrane and weighing not less than 3.5 kg per Sqm by torch application method. (d) The overlap for APP membrane shall be 75 mm on longitudinal direction and 100 mm on transverse direction. (e) Finally applying a coat of solar reflective (f) The make / treatment shall be from the one of the following manufacturer:-(i) 'Moply FP' of M/s Texsa (I) Pvt Ltd (ii) 'Hyperplast' pf IWL India Ltd. (iii) 'Super thermpay' manufactured by M/s Shalimar tar product. (iv) 'Hydro flame' of M/s Hydrotech Ltd.bitumiious aluminium paint @ 0.15 Kg/Sqm over the membrane.

Extra over rendering for work in isolated width such as in bands, sunk panels, cornices, skirting sides of slabs, parapet sides and top drip moulds etc and similar work not exc 15 cm width or girth complete all as specified and directed.

Supply only Liquid water proofing compound .

M&L for Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for rendering cement plaster 10 mm thick in CM 1:6 on fair faces of brick walls finished even and smooth w/o using extra cement complete all as specified and as directed.

M&L for rendering cement plaster 15 mm thick in CM 1:4 on fair faces of brick work or concrete wall surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M & L for Rendering 05 mm thick cement plaster on concrete surface in cement mortar 1:3 including plastered surface of ceiling shall be even and smooth without using extra cement completed

M & L for Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper on walls over a coat of primer on plastered surfaces complete including 3mm thick wall care putty complete all as specified and as directed.

M & L for Preparation of newly plastered surfaces of wall and applying two coats of cement base paint on walls over a coat of cement primer on plastered surfaces complete all as specified and as directed..

M&L for preparation of newly plastered surfaces of ceiling and applying three coat of white washing complete all as specified and as directed..

M&L for preparation of old decorated surfaces of walls and applying one coat of premium acrylic smooth exterior paint with silicone additives on external surfaces of wall as per manufacturers instruction all as specified and directed by Engineer-in-charge.

M&L for Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified.

M&L for 100mm thick Cement concrete (1:2:4), type B-2 using 40mm graded stone aggregate finished surface even & smooth without using extra cement complete all as specified.

M&L for 100mm thick Cement concrete (1:3:6), type C2 using 40mm graded stone aggregate finished surface even & smooth without using extra cement complete all as specified.

M&L for Forming construction joints 30mm deep x 10mm wide filled with sealing compound of grade 'B' complete all as specified and directed.

M&L for Forming contraction (Dummy) joints 35mm deep x 10mm wide filled with sealing compound of grade 'B' complete all as specified and directed.

M&L for Finishing surface of concrete by brooming while concrete is green complete all as specified and directed.

M & L for 75 mm thick PCC type D-2 1:4:8 (40 mm graded aggregate) as in sub base for tiling complete all as specified and as directed

M & L for cement concrete Type C2 1:3:6 (using 40mm graded aggregates) as in plinth protection 75 mm thick finished top surface even and smooth without using extra cement complete all as specified and as directed.

M & L for precast concrete interlocking paver block rubber moulded any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment including 25 mm thick sand cushion complete all as specified and as directed.

M & L for Chequered cement concrete tiles of 20 cm x 20cm x 25 mm thick with grey cement and pigment,set and jointed in neat cement slurry in floors over and including 15 mm thick screed bed or bedding layers in cement mortar 1:6 complete all as specified and as directed.

M&L for Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M & L non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete.

M & L non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete.

M & L for Non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat 10 mm thick in CM 1:4 all as directed.

M&L full body Vitrified coloured Ceramic tiles of light colour shade 8 to 10 mm thick (square/rectangular) polished, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6, complete all as specified and directed.

M&L full body Vitrified coloured Ceramic tiles of light colour shade 8 to 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, as in skirting to match the vitrified ceramic coloured light shade floor tiles etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10 mm thick backing or rendering coat of plaster in cement mortar 1:4, complete all as specified and directed.

M&L Glazed ceramic coloured tiles of size 450 mm x 300 mm and 7 mm thick of approved colour as in vertical surfaces such as skirting, dado and risers to steps etc., set and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 10mm thick backing coat in cement mrotar1:4 including triangular filleting in cement mortar 1:4 on top of skirting/dado etc complete all as specified and directed.

M&L for Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid and bedded and jointed in cement mortar complete all as specified and as directed.

M&L prepolished machine cut Kota stone 20 to 25mm thick in riser of steps, skirting, dado and pillar using Kota Stone of size 1200x250mm with tolerance of 10mm in length and width size set and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 15 mm thick screed bed or bedding layer of cement 1:6 including front nose moulding & two groove along the length of treads complete all as specified and as directed by Engineer-in-Charge

DR J S CHADHA AND SONS

Star Construction