REPAIRS TO OLD A-TYPE QUARTERS (3Nos.) SITUATED IN CODAR AGRICULTURE FARM, CODAR, PONDA-GOA.

Amount

Transportation and carriage (A) By tipper truck including loading, unloading and stacking(A) Lime,building rubbish, manure sludge, moorum excavated rock( i ) Lime,moorum, building rubbish upto 20km

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m.b)All types of Ordinary rock including all types of laterite rock, blasting prohibited

Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.

Brick work using common burnt building bricks in cement mortar 1:5 (1 cement : 5 coarse sand) with bricks of class designation 40 kg/ cm2.a)In foundation and plinth.

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement.

Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement.Extra for laterite masonry in all sizes in superstructure from floor I level upto floor V level.

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing :a)All works upto plinth level

Providing & laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:a)All works upto plinth level

Centering and shuttering including struttings, propping etc. and removal of formwork for :a_)Foundations, footings, bases for columns and mass concrete.

Centering and shuttering including struttings, propping etc. and removal of formwork for :b)vertical surfaces such as retaining walls , return walls, walls (any thk) including attached pilasters, buttresses, plinth and string courses, fillets, etc.

Making plinth protection 50mm thick of Cement Concrete 1:3:6 (1cement : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry laterite aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) c)In beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases upto floor five level

Centering & shuttering including Strutting, Propping & removal of forms for :iv)Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth

Centering & shuttering including Strutting, Propping & removal of forms for :xiii)Suspended floors, roofs landings, shelves & their supports

Providing High yield strength steel reinforcement bar (HYSD)/TMT steel reinforcement bar from secondary producers (Confirming to IS 1786 of 1986) for RCC work including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.

Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon.b)Second class Indian teak wood

Providing and fixing 38 mm thick panelled glazed or panelled and glazed shutters for doors, windows and clerestory window including anodized aluminium butt hinges with necessary screws:A)Second class Indian teak wood

Providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embeded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size.b)40 x 3 mm flat iron hold fast, 15 cm long

Providing and fixing bright finished brass butt hinges with necessary screws etc completea)125 x 70 x 4 mm (ordinary type)

Providing and fixing bright finished brass butt hinges with necessary screws etc completea)100 x 70 x 4 mm (ordinary type)

Providing and fixing bright finished brass sliding door bolts with nuts and screws etc completea)300 x 16 mm

Providing and fixing bright finished brass sliding door bolts with nuts and screws etc completeb)250 x 16 mm

Providing and fixing bright finished brass tower bolts (barrel type) with screws etc. complete.a)250 x 10 mm

Providing and fixing bright finished brass handles with necessary screws etc completeA)125MM

Providing and fixing bright finished brass handles with necessary screws etc completeA)125MM

Providing and fixing bright finished brass door latch with necessary screws etc completea)300x 16 x 5 mm

Providing and fixing 150 mm. bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete.

Providing & fixing Two Track sliding window Yashashri make or equivalent, in heavy sections made out of 104mm x 51 mm x 2.5 mm Upvc multi cavity track section & shutter made out of 45mm x54mm x 2.5mm Upvc multi cavity section welded in corners with Glass beading & EPDM Gasket & 4mm clear glass with lock & rollers. The average weight of Two Track Sliding window (Heavy) is16.75 kg per sq mtr. These Upvc sections are tested by using BS 2782 & DIN 53459 test methods.

Steel work welded (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only)in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of red lead paintb)In tees, angles, flats and channels

Providing and fixing 1 mm thick M.S. sheet garage door with frame of 40 x 40 x 6 mm angle iron 3.15 mm M.S. gusset plate at the junction and corners, all necessary fitting complete including applying a priming coat of red lead paint.a)Using M.S. angles 40 mm x 40 mm x 6 mm for diagonal braces.

Providing and laying of aluminium fixed with 65mm x 38mm tubular frame with 6mm thick glass sections are powder coated with pure ployster powder of thickness 75-80 microns with approved standard accessories. The glass would be fixed with taper clips with EPDM beading

Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Adjustable louvered windows in figured glass and powder coating with pure polyester powder of shade of required colour on the aluminium section

Kotah stone slab flooring over 30 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing completeA)20 mm thick.

Providing and laying crazy paving (as per design shown in the drawing or as directed by the engineer-in- charge) with approved quality shahabad tile 20 mm thickness (unpolished) of specified sizes laid on 20 mm thick (average) bed of cement mortar 1:5 (1 cement : 5 coarse sand) as directed completed.

Cuddappah stone slab machine cut flooring over 20mm (average) thickness of cement mortar 1:4 (1 cement : 4 coarse sand laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete - 25 mm thick.

Providing 25 mm thick cuddapah slabs machine cut and polished on either side in partitions including making necessary grooves in the wall and fixing with cement mortar, complete as directed by the engineer-in-charge

Providing and fixing 1st quality ceramic glazed wall tiles (Johnson, Somany, Kajaria )conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete.Wall Ceramic Glazed Tiles : 300 x 450

Providing and and laying Ceramic glazed floor tiles300 x 300 (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in colours such as white, ivory, grey, fume red, brown laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete

Providing and laying 20mm thick cuddapah in shelves over 20 mm thick base of cement mortar 1:3 complete

Providing and and laying antiskid floor tiles 12 x 12 upto 16 x 16 in of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete.a)Dark shade

Providing and and laying antiskid floor tiles 12 x 12 upto 16 x 16 in of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete.b)light shade

Providing & Fixing Alluminium Barge Board of approved make adhering to Alluminium 3105 grade of 0.71mm thickness & 60 cm wide inclusive of SS304 grade self tapping fastners, to match the Alluminium roofing system & as directed by Engineer in charge complete

Neat Cement punning

12mm cement plaster 1:3 (1 cement : 3 coarse sand)

18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge.

Providing & Fixing in position Double Skin roof with Zincalume/ Galvalume colour coated & bare profile sheet with subtle square fluting factory cut at all heights for roof, side & Gable cladding complete in all respect. TOP SHEET-The end rib shall be designed for anti-capillary action. The feed material should be manufactured out of nominal0.45 mm Base Metal Thickness (BMT), Hi-strength steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 43.5% Zinc &1.5% Si) as per AS 1397 - Zincalume AZ150 (Min. 150 gms/sq.mt total on both sides) with quality paint coat as per AS/NZS 2728 type 3-4. The paint shall have a total coating thickness of nominal 35 μm, comprising of nominal20 μm exterior SMP coat on top surface and nominal 5 μm reverse backer coat on back surface over nominal 5 μm primer coat on both surfaces of approved colour shade. Total Coated Thickness (TCT) should be 0.50mm. Total Painted Thickness (TPT) should be in addition to 0.50mm. The steel sheet shall be fastened with nominal 40 μm zinc coated or nominal 25 μm zinc-tin alloy coated, Hex head, self-drilling screw as per AS 3566-2002 Class 3 fasteners of approved make with EPDM washer as per the requirement considering the profile shape and design load. The fastener size shall be calculated as per the design or manufacturers recommendations.The profile sheet, fastener size etc. shall be approved by the Engineer. The sheeting should be with minimum 200mm lap & waterproof with Silicon sealant non-hardening neutral cure type shall be applied at all end laps, complete as directed Z-Sub Girt - roll formed section 50x50x50x1.50 TCT, 120GSM Galvanised, High Strength (345 MPa), approximate Wt. 1.85 kg/r.m. fixed with self tapping screws Glass Wool Insulation with FSK facing 50mm with 24 kg/m3 density in between 2 sheets. LINER SHEET-bare galvalume/zincalume roofing sheet of same profile as top sheet. The feed material is of manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.47 mm TCT), Hi-strength steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 45% Zinc) as per AS 1397 - Zincalume AZ150 (Min. 150 gms/sq.mt total on both sides), passivated & resin coated. The feed material should have coil manufacturer’s product details marked at regular interval for confirming genuinity of the material. complete as per the directions of the engineer. The steel manufacturer's test certificate for the chemical & mechanical properties of steel must be submitted for approval prior to installation.

providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth above 610mm) including all the accessories complete as per the directions of the Engineer in charge.

Removing white or colour wash by scrapping, sand papering and preparing surface smooth including necessary repairs to scratches etc. complete.

Applying one coat of distemper primer of approved brand and manufacture on wall surface.

Painting 2 coats with oil type wood preservative of approved brand & manufacture on new work.

Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.

Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.

Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture in all shade or new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture to give an even shade

Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.

Painting three or more coats with acryllic exterior paint of approved brand and manufacture (such as weather shield,APEX) including applying one coat of cement primer and one coat of surface treatment etc. complete.

Fixing doors chowkhat in existing opening including embedding chowkhats in floor, cutting masonry for hold fasts embedding hold fast in cement concrete blocks with cement concrete 1:3:6 (1 cement ; 3 coarse sand : 6 graded stone aggregate 20mm nominal size) painting two coats of coal tar to sides of chowkhats and making good the damages to walls & floors complete including disposal of rubbish to the dumping ground within 50mts. lead.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mts. lead.

Demolishing cement concrete 1:3:6 or richer mix including disposal of material within 50 m lead.

Dismantling wood work of sectional area 40 sq.cm. and above wrought framed and fixed in frames, other frames and trusses including stacking of material within 50 mts. lead (span upto 10 mtrs.)

Dismantling doors, windows and clearestory windows (steel or wood) shutters including chowkhats architrave holdfast etc. complete and staking within 50 mt. A)LeadOf area 3 sq.m. and below

Taking out doors, windows and clerestory windows shutters (steel or wood) including stacking within 50 mts. leadA)LeadOf area 3 sq.m. and below

Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm.

Dismantling tiled roofing (mangalore or pot or country tiles) with battens etc. complete including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead.

Dismantling of existing G.I pipe including disposal of unserviceable material and stacking of serviceable materials .a)Upto 20 mm nominal bore

Removing and refixing of door/ window shutters paneled or paneled and glazed including replacing of existing hionges chiseling etc complete as directed by Engineer- in – chargea)Below 1 Sq.m area

Removing and refixing of door/ window shutters paneled or paneled and glazed including replacing of existing hionges chiseling etc complete as directed by Engineer- in – chargeb)Above 1 Sq.m area

Proving and fixing white vitreous china water closet squatting pan (Indian type w.c. pan) size 580 mm with 100 mm sand cast iron P. or S trap 10 litres high level P.V.C. flushing cister (of approved make) with fittings, rack bolts 32 mm diameter P.V.C telescopic flush pipe with fit tings and clamps 25mm P.V.C. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon pull complete cutting and making good the walls and floors where required.a)Long pan pattern W.C. pan

Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required.b)Flat back wash basin size 630x 450mm with a single 15 mm C.P. brass pillar taps.

Providing and fixing G. I. Inlet connection for flush pipes connecting with W. C. pan

Providing & fixing (4’) 100 mm sand cast iron grating for gully floor or nahni trap.

Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with C. P. brass screws and washers.

Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screwsb)600 x 20 mm size

Providing and fixing sand cast iron trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :a100 mm inlet and 100 mm outlet.

Providing and fixing brass stop cock (heavy) of approved quality :b)20mm nominal bore

Providing and fixing brass full way valve (heavy) duty with wheel of approved quality :d)32 mm nominal bore .

Providing and fixing C.P. brass shower rose with 15 or 20 mm. Inlet:b)150 mm diameter.

Providing and fixing square-mouth S.W. gully trap grade ‘A’ complete with c.i. grating brick masonry chamber and fixing water tight Concrete cover of size 300mm X300mm(supplied seperately) standard design finished as per requirement,complete with :150 x 100 mm size –P or S type

Dismateling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps:a)100 mm diameter .

Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone agrregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cemetn and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design.Inside size 90 x80 cm and 60 cm deep including C.I. cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg.)

Making soak pit, 2.5 m dia 3 m deep with 45 x45 cm dry brick honey comb shaft and S.W. drain pipe 100 mm diameter,1.8 m long complete filled with laterite stone aggregate 125 to 180mm surrounded by laterite stone aggregate of 40mm and down guage as per standard design.

Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:a)110 mm dia

Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed75 mm dia

Providing and fixing rigid PVC bend of required degree(of approved make ) for S.W.R. drainage pipes of approved including lubricating a)110mm dia

Providing and fixing rigid PVC bend of required degree(of approved make ) for S.W.R. drainage pipes of approved including lubricating 75mm dia

Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door :a)110 mm dia

Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door75 mm dia

Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door :a)110 mm dia

Providing and fixing U.P.V.C. pipe clips (approved make ) for S.W.R. pipes :a)110 mm dia

Providing and fixing U.P.V.C. pipe clips (approved make ) for S.W.R. pipes b)75 mm dia

Providing and fixing R.P.V.C. vent cowl:b)75 mm dia

Providing and fixing NICKEL chrome plated copper alloy Fancy long body bib cock with wall flance Jaquar make or equivalent. Confirming to IS 8931;1993 a)15mm nominal bore

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe).d)32 mm outer dia CPVC pipe

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc.d) 32 mm dia nominal outer dia pipes.

Providing and fixing P.V.C. connection pipe with brass unions 15 mm nominal bore:c)45 cm (18”) length .

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 including cutting of stone and making good the walls wherever required. Kitchen sink without drain board. with coupling & all accessories complete with choke stop strainer, Plain type having flat borders for correct sandwithing between the plaform top and bottom slabs complete.Overall size 610mmx510mm (24"x20") bowl size 545mmx445mmx200mm (211/2"x 17 1/2"x 8") depth 200 mm. Glossy. 1.0mm thk,

Providing anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building. b) Post-construction

An elastomeric, cementitious, waterproof coating for concrete and masonry.Providing and applying on a well prepared vertical surface Masterseal 550EL of BASF make or equivalent elastomeric flexible, two component polymers modified cementitious composite system that requires no addition of water at the site. The product shall be applied in minimum two coats to achieve total DFT of 1mm. The material shall be mixed and applied fully in accordance with the manufacturer's instructions. The product shall exhibit at least 40% elongation at ambient & 30% elongation in under water condition with tensile strength greater then 20 Kg/cm2. The product shall resist 1.5 bars pressure when tested as per DIN 1048 at 2mm DFT. When applied at 2mm DFT, elastomeric coating shall be able to bridge crack up to 0.5mm width. All scaffolding, ladders, supporting materials etc. complete. Rates shall be inclusive of all labour, materials, tools and plant etc. complete.

Wiring for light point/ fan point/ exhaust fan point/ callbell point with 1.5 sq.mm FRLS PVC insulated copperconductor single core cable in surface steel conduit(medium) with modular switch, modular plates, suitablesize modular GI box of specified Category and earthing thepoint with 1.5 sq.mm FRLS PVC insulated copperconductor single core cable etc. as required.Group C -- with Cat A Modular Accessories

Wiring for 5A /15A plug with 4 x 4 sq.mm FR PVCinsulated copper conductor single core cable in PVCcasing capping alongwith 2 Nos of 4 sq.mm FR PVCinsulated copper conductor single core cable for loopearthing as required.

Wiring for circuit/ submain wiring alongwith earth wirewith the following sizes of FR PVC insulated copperconductor single core cable in the independent PVC casingcapping of appropriate size as required.e) 2 x 10 sq.mm + 1 x 10 sq.mm earthwire (25mm casing

Supplying and fixing following modular switch/socket on the existing modular plate and switch boxincluding connections but excluding modular plateetc. as required(d) 3 pin 5/6 A socket outlet Cat A

Supplying and fixing following modular switch/socket on the existing modular plate and switch boxincluding connections but excluding modular plateetc. as required(e) 6 pin 15/16 A socket outlet Cat A

Supplying and fixing stepped type electronic fanregulator on the existing modular plate switch boxincluding connections but excluding modular plateetc. as required a)CAT A

Supplying and fixing following size modular GI boxalongwith modular base and cover plate formodulator switches in recess etc. as required(b) 4 Module ( 125 mm x 7 mm) Cat A

Supplying and fixing following size modular GI boxalongwith modular base and cover plate formodulator switches in recess etc. as required(c) 6 Module (200mm x 75 mm) Cat A

Supplying and fixing following size modular GI boxalongwith modular base and cover plate formodulator switches in recess etc. as required(d) 8 Module (125mm x 125 mm) Cat A

Supplying and fixing 3 pin 5 A ceiling rose on theexisting junction box/ wooden block includingconnections etc as required.

Supplying and fixing call bell/ buzzer suitable forsingle phase 230 V complete as required.(a) Ding Dong Bell

Installation, earthing, testing and commissioningof ceiling fan including wiring the down rod ofstandard length (upto 30 cm) with 1.5 sq .mm FRPVC insulated copper conductor single core cableincluding providing and fixing phenolic laminatedsheet cover on the fan box etc. as required.

Supplying and fixing extra down rod of 20 cm length GI pipe 15 cm dia heavy gauge includingpainting etc as required

Supplying and fixing following way TPN sheet steel,single door, Horizontal type MCB distribution board415 V on surface/ recess complete with tinned copperbusbar neutral busbar earth bar dinnbar detachablegland plate interconnections phosphotized and powderpainted including earthing etc. as required ( butwithout MCB/RCCB/Isolator)(a) 4 way ( 4 + 12) single door horizontal type Cat A

Supplying and fixing 6 A to 32 A, C series MCB suitablefor lighting and other loads of following poles in theexisting MCB DB complete with connections testing andcommissioning etc as required.

Supplying and fixing following rating three pole 415 Visolator in the existing MCB DB complete withconnections testing and commissioning etc as required(a) 40 A, Cat A

Earthing with GI earth plate 600 mm x 600 mm x 6 mmthickincluding accessories and providing masonryenclosure with CI/RCC cover having locking/Liftingarrangement and watering pipe etc. (but without charcoalor coke and salt) as required as per the Earthing Drawingprovided by the Engineer-Incharge.The scope of workincludes the following: a) Excavation of pit of size 1.0x1.0x3.0 mtrs(min) and disposal of excavated soil. c)WateringGI pipe, 20mm, Class B, with funnel as per specs. d)Charcoal/salt as per specs ( paid seperately). e) Refillingthe pit of size 1.0x1.0x 3.0 mtrs(min) with soft blackagriculture soil of minimum resistivity i/c transportation.e)Masonary chamber with proper foundation, cover plateand locking arrangement. f) Testing of earth value withearth megger and certifications of its value. Aluminium tagwith embossed earthing value to be attached to thepipe.g)watering arrangement(plumbing will be paidseperately).In soily strata

Supply and erecting of 56 inch (1400mmsweep) ceiling fan, double ball bearing type, ,complete with all accessories.Cat A

Supplying installation testing and comissioning of 22wLED surface and wall mounted LED batten-tube of make jaquar(cat no.Commercialm indoor series glaza ultra aluminium,item code LGLZU1X022XN ) of jaquar or equivalent make complete as required and approved by enginerr-in charge.

Supplying installation testing and comissioning of 22wLED surface and wall mounted LED batten-tube of make jaquar(cat no.Commercialm indoor series glaza ultra aluminium,item code LGLZU1X022XN ) of jaquar or equivalent make complete as required and approved by enginerr-in charge.

sumitra construction (BID ID -49606)