Repair of crane bay building ans sub division office building at 220 kv sub station Lalton Kalan

Amount

Regrading terracing of mud plaster covered with tiles or bricks in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud plaster to proper, slope, relaying mud plaster Gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement and 3 fine sand)

Cement concrete 1:2:4 gola10cm x 10cm concave quadrant

Replacement of worn out tiles with new one

Providing and fixing Polythene sheet

Scraping of Cement Plaster

12.5mm thick cement plaster 1:4

Dismantling cement conglomerate floors (25mm to 50mm) thick without concrete base( SSE BATHROOM)

Conglomerate floor 50mm thick cement conc. Topping 1:2:4

P/FAnti-skid floor tiles 10mm thick in flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with whitecement slurry in joints including corners angles and beading

Providing and fixing 1st quality ceramic glazed wall tiles conforming to fsize 200 x 300 mm assteps and dados over 12 mm thick bed of cement Mortar 1:4approved by Engineer-in-Charge in

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled a. Door of area 3 sqm and below

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled a. Window of area 3 sqm and below

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sectionsJindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge

For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board in paneling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete

Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete

Wiring fan point without fan box in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with step type electronic fan regulator 100watts.

Wiring light point in PVC insulated copper conductor singl core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade.

Wiring call-bell point in PVC insulated copper conductorsingle core FRLS cable (ISI marked) overall 1.5 sq. mm,1100volts including the cost of bell push, electronic buzzer & powder coated concealed metal box for electronic buzzer).

Wiring 3 pin 6 Amp. wall socket (Shuttered) point in PVCinsulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade complete wit\ FRLS cable (ISI marked) overall 1 sq. mm, 1100volts grade.

Supply and erection of PVC insulated single core FRLS copper conductor cable ISI marked left bare in pipe or casing of suitable size excluding the cost of supply and erection of pipe or casing.PVC insulated copper conductor single core FRLS cable (ISI marked) overall 2.5 sq.mm, 1100volts grade

PVC insulated copper conductor single core FRLS cable (ISI marked) overall 4 sq.mm, 1100volts grade

Wiring 3 pin 16/20 amp. power plug control (shuttered) and switch.

Supply and Erection of Heavy gauge PVC conduit pipe 25mm dia. (ISI marked 2mm thick) Flushed

Supplying and Erection of Miniature circuit breaker single pole 0.5 to 4amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply

Sheet metal double door S.P. & N. distribution board (dust protected) provided with bus bar, neutral link and din bar, suitable for incorporating MCB's/ RCBO/ RCCB's, 12way each as per csr

Providing and laying, jointing fixing and testing G.I. Pipe lines B-Class including cost of specials such as tees, bends, sockets, elbows etc. testing, cutting, threading Inside building complet15mm i/d

Providing and laying, jointing fixing and testing G.I. Pipe lines B-Class including cost of specials such as tees, bends, sockets, elbows etc. testing, cutting, threading Inside building complet20mmi/d

Providing, fixing and jointing G.I union complete on all respect15mm i/d G.I union

Providing, fixing and jointing G.I union complete on all respect20mm i/d G.I union

Providing, fixing and jointing gun-metal peet valves (Heavy Pattern) with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete.20mm i/d G.I union

Providing and fixing in position Chinaware European type water closet P trap or S trap (to the approval of the Engineer-in-charge) suite-consisting of 10 ltr. PVC flushing cistern supported on angle iron bracket, short bend 32 mm dia

Providing and fixing jet spray with 2'-6" long PVC pipe.With C.P. Brass nut

Providing and fixing in position best Indian make white ordinary lavatory suites consisting of C.P. brass waste 32mm dia, pair of angle iron bracket with one C.P. brass tap complete.Size 550 mm x 400 mm

Providing & fixing in position best Indian make (to be approval of the Engineer-incharge) vitreous Chinware white flat back or angular lipped front urinal size 440 x 315 x 265 mm C.P. brass flexible tube connection 450 mm long.

Providing & Fixing in postion 15 mm i/d bib cock of cp braas without flange (as approved by the Engineer-in-charge).

Providing, Stringing out U.P.V.C. Pipes casting asper IS:15328-2003 class-SN-8 along the trenches and laying the same in Trenches to correct alignment and gradients, cutting and jointing including cost of specials complete as per specifications.110mm o/d pipe

Providing & Fixing in postion stop cock / Angle valve cp brass(as approved by the Engineer-incharge) C.P.brass 15mm stop cock Male and female end

Providing & Fixing in position best indian make bevelled edge 5mm thick mirror mounted on 4mm thick Cardboard sheet ground fixed in position by means of 4 nos. chromium plated brass screws and washers .Size 600mmx450mm

Providing and fixing in position towel rails of approved make including cutting and making good the walls etc CP brass Rails size 15mm dia 600mm long

Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm,100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x330mm

Providing and fixing in position S.S grating with Frame of approved brand

Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two coats)

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish

Finishing walls with acrylic smooth exterior paint of required shade with two coats applied @ 1.67 litre/10sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm

Supplying and Fixing exhaust fan 12'' crompton make as per NS item

Supplying and fixing general purpose tube fitting of Crompton make 1x28W as per NS item.

Making soak pit 2.5 m outer Diametre 3.0 metre deep 230mm thick 1:5 brick work honey comb with bricks of Ist Class and S.W. drain pipe 100 mm Diametre, 1.8 m long complete as per standard design. With FPS bricks

Renewing glass panes with putty and nails wherever necessary

Corrugated G.I. Sheet roofing 0.80 mm thick fixed with galvanized iron J or L hooks 10mm dia, G.I. Limpot and bitumen washers complete excluding the cost of purling rafters and trusses. 20 % of total area

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete.

White washing (Three coat)

providing and fixing double scaffolding system (cup lock type) on the exterior sideupto seven storey hieght made with 40 mm dia MS Tube 1.5 m c to c horizontal and vertical tubes etc

Extra rates for white washing distempering painting etc where any single storey hieght exceeding 4 mtr

Extra carraige for coarse sand

Extra carriage for bricks and tiles

Extra carriage for fine sand

Extra carriage for cement

Extra carriage for Crusher 13.2 mm

Extra carriage for Crusher 11.2 mm

CHANDAN ENTERPRISES

M/s R K Jindal