Loading
Loading…
Loading…
Tender Value
₹1.8 Cr
EMD Value
₹2.4 L
Closing Date
17 Mar 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
OS CAPITAL
17 conditions · 4 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet
The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet
The tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender
Note:-As per CEE/HJP letter no. ECR/Tender policy/520 dt,23.07.2019 Contractor should have electrical contractor's license of the highest voltage(11 KV or above) at which he will commissioned the system.
Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of opening of tender, shall also be considered provided the work experience 1.1.1 certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
SIMILAR NATURE OF WORK:- 1-Erection of 11 KV or above voltage level 1.1.2 sub station. 2- Erection and commissioning of 11 KV or above voltage level line (Overhead or underground)
31 conditions · 14 needing a document upload
The tenderer shall clearly specify whether the tender is submitted on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / HUF etc. as the case may be. Following documents should be submitted by the tenderer according to nature of firm, otherwise offer will be treated as invalid: -
Following documents should be submitted by the tenderer in case of HUF: (i) (ii) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.
Following documents should be submitted by the tenderer in case of Company registered under Companies Act 2013:(i) (ii) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above.
Following documents should be submitted by the tenderer in case of LLP (Limited Liability Partnership): If the tender is submitted on behalf of a LLP registered under LLP Act-2008, the tenderer shall submit along with the tender: LLP (Limited Liability Partnership): (i) (ii) A copy of LLP Agreement A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet).
Following documents should be submitted by the tenderer in case of Partnership Firm: (i) A notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. 26 GCC April 2022 (ii) A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract. (iv) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.
I/We have read and understood the condition of GCC 2022 and will submit all documents as per GCC 2022.
There should be bond agreement with the Supervisor showing employability with the Firm.
The following documents should be specified for submissionalong with tender
A. List of Personnel, Organization available on hand and proposed to be engaged for the subject work
List of works on hand indicating description of work, contract value,and approximate value of balance work yet to be doneand date of award
Mandate Form/Bank details must be uploaded
The tenderers shall submit a copy of certificate stating that all their statements/documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-V. Non submission of above certificate by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested by which they/he is qualifying the qualification criteria mentioned in the tender document.
BIDDER SHOULD SUBMIT ESIC REGISTRATION CERTIFICATE
BIDDER SHOULD SUBMIT EPF REGISTRATION
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / HUF etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be.
The above power of attorney shall be submitted even if such specific person is authorized for above purposes through partnership deed / Memorandum of Understanding / Article of Association or such other document, failing which tender is liable to be rejected
If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm / Partnership firm / Joint Venture / Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender.
After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm / Registered Company/ Registered Trust / Registered Society / HUF etc. shall be neither asked nor considered, if submitted. Further, no suo moto cognizance of any document available in public domain (i.e., on internet etc.) or in Railway's record/office files etc. will be taken for consideration of the tender, if no such mention is available in tender offer submitted.
Para 6.1 Part-I of GCC shall be read as under:- The tenderers shall submit a copy of certificate stating that all their statements/documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to annexure-V, in case of other than Company/proprietary firm, Annexure-V A shall also be submitted by the each member of partnership firm/Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership etc.as the case may be. Non submission of above certificate by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self-attested/digitally signed by which they/he is qualifying the qualification criteria mentioned in the tender document
There should be bond agreement with the Supervisor showing employability with the Firm OR any other document showing supervisors employment with the firm.
Contractor is to abide by the provisions of Payment of Wages act & MinimumWages act. In order to ensure the same, an application has been developedand hosted on website 'www.shramikkalyan.indianrailways.gov.in'. Contractorshall register his firm/company etc. and upload requisite details of labour andtheir payment in this portal. These details shall be available in public domain.The Registration/ updation of Portal shall be done as under: (a)Contractorshall apply for onetime registration of his company/firm etc. in theShramikkalyan portal with requisite details subsequent to issue of Letter ofAcceptance. Engineer shall approve the contractor's registration in the portalwithin 7 days of receipt of such request. (b)Contractor once approved by anyEngineer, can create password with login ID (PAN No.) for subsequent use ofportal for all LoAs issued in his favour. (c)The contractor once registered onthe portal, shall provide details of his Letter of Acceptances (LoA) / ContractAgreements on shramikkalyan portal within 15 days of issue of any LoA forapproval of concerned engineer. Engineer shall update (if required) andapprove the details of LoA filled by contractor within 7 days of receipt of suchrequest. (d)After approval of LoA by Engineer, contractor shall fill the salient details of contract labours engaged in the contract and ensure updating of each wage payment to them on shramik kalyan portal on monthly basis. (e) It shall be mandatory upon the contractor to ensure correct and prompt uploading of all salient details of engaged contractual labour & payments made thereof after each wage period. While processing payment of any 'On Account bill' or 'Final bill' or release of 'Advances' or 'Performance Guarantee /Security deposit', contractor shall submit a certificate to the Engineer or Engineer's representatives that "I have uploaded the correct details of contract labours engaged in connection with this contract and payments made to them during the wage period in Railway's Shramik kalyan portal at 'www.shramikkalyan.indianrailways.gov.in' till ____Month, ____Year and will submit all documents related to payment of wages, Bank statement ,EPF and ESIC contribution slip.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Bidders are advised to follow the above eligibility and qualifying criteria and submit documents in proper format toqualify their bid for evaluation of offer. If any of the documents is found missing or not in proper form, their offer will not beconsidered for evaluation and post tendering correspondence will not be made to get any additional paper in support of theirclaim for qualifying and eligibility criteria
Note- Segregation of AC Circuit from other load to be ensured (A) On account 90% payment will be made to contractor against supply, installation,testing and commissioning on production of material inspection certificate receipted challan, joint note with Sr.DEE(G) Authorized supervisor, test certificate of manufactureretc.(b) The number (i.e. maximum/minimum) of on account payment will be decided by the Sr. DEE/G/MGS depending upon the performance of contractor or importance of work.(C) Balance 10% will be released/ paid with the final bill after successful completion, testing & commissioning of the complete awarded/ approved varied workd. In case of AMC 85% quarterly will be made rest 15% payment will be made after successfully completion of three year. Bill passing authority is Sr DEE/G/DDU and Paying authority is SrDFM/ECR/DDU
Contractor is to abide by the provisions of Payment of Wages act & MinimumWages act. In order to ensure the same, an application has been developedand hosted on website 'www.shramikkalyan.indianrailways.gov.in'. Contractorshall register his firm/company etc. and upload requisite details of labour andtheir payment in this portal. These details shall be available in public domain.The Registration/ updation of Portal shall be done as under: (a)Contractorshall apply for onetime registration of his company/firm etc. in theShramikkalyan portal with requisite details subsequent to issue of Letter ofAcceptance. Engineer shall approve the contractor's registration in the portalwithin 7 days of receipt of such request. (b)Contractor once approved by anyEngineer, can create password with login ID (PAN No.) for subsequent use ofportal for all LoAs issued in his favour. (c)The contractor once registered onthe portal, shall provide details of his Letter of Acceptances (LoA) / ContractAgreements on shramikkalyan portal within 15 days of issue of any LoA forapproval of concerned engineer. Engineer shall update (if required) andapprove the details of LoA filled by contractor within 7 days of receipt of suchrequest. (d)After approval of LoA by Engineer, contractor shall fill the salientdetails of contract labours engaged in the contract and ensure updating ofeach wage payment to them on shramikkalyan portal on monthly basis. (e)Itshall be mandatory upon the contractor to ensure correct and promptuploading of all salient details of engaged contractual labour & paymentsmade thereof after each wage period. While processing payment of any 'OnAccount bill' or 'Final bill' or release of 'Advances' or 'Performance Guarantee /Security deposit', contractor shall submit a certificate to the Engineer orEngineer's representatives that "I have uploaded the correct details of contractlabours engaged in connection with this contract and payments made to themduring the wage period in Railway's Shramikkalyan portal at'www.shramikkalyan.indianrailways.gov.in' till ____Month, ____Year
The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the Railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the Railway thereunder.
In case of any information submitted by tenderer is found to be false forged or incorrect at any time during process for evaluation of tenders, it shall lead to forfeiture of the tender Earnest Money Deposit besides banning of business for a period of up to two years.
As per GCC Advance correction slip no.05 para 5 (3) ii. The original Bank Guarantee should be delivered to Office of the Sr.DEE(G)/DDU before closing date for submission of bids (i.e. excluding the last date of submission of bids)
The work should be completed within 3 months from issue of LOA & AMC of Split A.C. will start after expiry of warranty/Guarantee of Split A.C.
WORK-SCHEDULE: Upgradation of power supply system including improvement of illumination with emergency light under TS-1 and HT section in DDU.
DDU-EL-G-P-2025-26-13R
DDU-EL-G-P-2025-26-13R
Open
Works - General
6 Months
Chandauli, Uttar Pradesh
₹0
₹2.4 L
17 Mar 2026
20 Feb 2026
3 Mar 2026
104 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 71,12,044.2 | ||
| — | 680.00 | — | — | ||
| Supply of XLPE LT Aluminium cable of size 4 core x 185 Sq. mm. multistrand armoured ISI approved suitable to 1100 volt grade Make: Paragon, Havells,Nicco, Universal. | — | — | — | 5,65,760 | |
| — | 400.00 | — | — | ||
| Supply of XLPE LT Aluminium cable of size 4 core x 240 Sq. mm. multistrand armoured ISI approved suitable to 1100 volt grade Make: Paragon, Havells,Nicco, Universal. | — | — | — | 4,34,800 | |
| — | 400.00 | — | — | ||
| Supply of 3 Core X 120 sq. mm HT Cable duly ISI approved of reputed make suitable for 11 KV. Make - Havells, Gloster, Nicco, Polycab | — | — | — | 4,04,000 | |
| — | 1480.00 | — | — | ||
| Transportation of above cable from store to site. | — | — | — | 1,110 | |
| — | 1406.00 | — | — | ||
| Supply of HDPE Pipe, Laying and drawing of HT / LT cables through Pressure machanism inside the pipe and proper connection to junction Box as per site requirement in all respect ( Size of cable HT / LT 3 core / 4 core from 50 sq mm to 240 sq. mm ), thickness of HDPE should not be less than 06 mm. HDPE will be laid down in the pucca Trench as per site requirement of pucca trench as well as HDPE should be confirming to IS 14333 1966 or latest.Make of Pipe -Asian, Appollo pipes, Vectus, Utakarsh HDPE pipe , pressure rating at 30 Deg. centigdade : PN 6 , confirmity to IS : 4998 or latest. Thickness of pipe min. 5.3 mm and max. 5.9 mm ISIMarked , CM/L : 7395589, Material Grade : PE 100. | — | — | — | 7,38,051.58 | |
| — | 2.00 | — | — | ||
| Supply, Fixing, testing and commissioning of 11 KV indoor type heat shrinkable type cable end sealing box suitable to 3 x 50/70/ 95/ 120 sq.mm duly ISI approved complete in all respect.Make - Raychem, RPEG, Renson,3M | — | — | — | 9,767.26 | |
| — | 2.00 | — | — | ||
| Supply,fixing,testing and commissioning of 11 KV Outdoor type heat shrinkable type cable end sealing box suitable to 3 x 185/150/120 Sq. mm. duly ISI approved complete in all respect. As per item code of DENSON. Make -DENSON,REYCHEM,RPEG,3M | — | — | — | 21,831.3 | |
| — | 4.00 | — | — | ||
| Supply of Thermoplastic Cable Junction Boxes IP 65 with metric knockouts for cable entry of size maximum upto 240 Sq mm , Size of Jn. Box : 300mm x600 mm x 170 mm , Cat. No. with terminals K 2404 ( 4 Terminals ) . Make - HENSEL.Sintex,Supreme | — | — | — | 85,260 | |
| — | 4.00 | — | — | ||
| Fixing, testing and commissioning of above junction box. | — | — | — | 1,281.6 | |
| — | 1.00 | — | — | ||
| Supply,fixing,testing and commissioning of triple pole GOS suitable to operated on 3 Phase 11 kV AC supply of 400 Amp. Cap. 4 insulator type with DO fuse unit and operating rod with locking arrangement etc. ISI approved, Make : Rastriya Electrical & Engg, National, Jaipuria Brothers. | — | — | — | 8,464.67 | |
| — | 1.00 | — | — | ||
| Supply, Installation, testing and commissioning of 11 KV lightening arrestor as per spec. No:- CEE/LA/062-11-88. each set consists of 3 nos. of lightening arrestor confirming to IEC-99- 4/199/standard and IS: 3070 part-1(1985). Make: Rashtriya Electrical & Engg, Jaipuriya Brothers Electrical Pvt Ltd, Global Industries. | — | — | — | 1,715.38 | |
| — | 10.00 | — | — | ||
| Supply, and erection of Earthing with 50 mm Dia. 3 mtr. Length GI Pipe, B-Class as per IS:3043-1987, Confirming to IS :1239 or latest complete with earth box including connection from earth Electrode to MDB/SDB/Poles with 8 SWG GI Wire. Make of Pipe : TATA, JINDAL Surya,Bhushan with latest Ammendment and Technical Specifications. | — | — | — | 32,756.6 | |
| — | 1.00 | — | — | ||
| Installation , connection, testing and ommissioning of above transformer including plinth constrution alongwith construction of iron structure with metal & transparent sheet top Cover and MS grill structure duly painted at four sides of transformer. | — | — | — | 64,860 | |
| — | 1.00 | — | — | ||
| Supply, fixing, testing and commissioning of 11 KV HT floor mounted indoor type VCB panel type UMV vertical isolation and horizontal draw out type 400 Amp /250 MVA , 3 phase comprisioning of 3 nos. one for incoming and two nos. for outging 400 Amp 11 KV 250 MVA VCB with CT ratio 100/50/5A PT 11 KV/110 volt auxillary relay , tip relay, overcurrent relay, eath fault relay, voltmeter, ammeter, selector swith, copper busbar 630 Amp capacity (1 set) complete in all respect make- Siemens, areva, L&T,Schneider | — | — | — | 9,87,000 | |
| — | 1.00 | — | — | ||
| Supply of 4 pole ACB fixed Mounting Design with Microprocessor based trip unit with over load protection, short circuit protection and Earth fault protection for three phase and wire system. Rated current 800 Amp Make - Anchor, Havells, Siemens, C&S. | — | — | — | 1,16,627.74 | |
| — | 1.00 | — | — | ||
| Fixing, testing and commissioning of 4 pole ACB with all protection | — | — | — | 9,282.99 | |
| — | 2.00 | — | — | ||
| Transportation of above Rail Pole from PWI/store to site. | — | — | — | 137.78 | |
| — | 1.00 | — | — | ||
| Supply( except rail pole), fabrication, & erection of 'H' Pole structure bracing with angle iron 50 X 50 X 6 mm & 75 X 40 X 6 mm channel nut bolt, rail pole length exceeding 10 m but not exceeding 13 mtr direct in ground including excavation refilling with cement concrete 1:3:6 ( Cement, concourse sand, 40 mm graded stone nominal size) made of foundation 20 mm X 20 mm continued upto 30 cm above ground level etc as per required. | — | — | — | 9,068.72 | |
| — | 71.00 | — | — | ||
| Fabrication and fixing of MS tray 18" (0.45 mtrs.) wide made of MS angle of size 65x65x6 mm on both sides and MS Flat 18" wide made of size 40x6 mm. welded at a distance of 12" (0.30 mtrs.) | — | — | — | 56,800 | |
| — | 452.00 | — | — | ||
| "Supply, replacement, fixing, testing, connecting and commissioning of Inverter LED batten with square profile and poly carbonate /Extruded Aluminimum channel. Lithium Ion battery with charging time 8 hours-10 hours and back uptime upto 3 to 4 hours energy efficient luminaries complete with all accessories of capacity 20 watt, 4 feet length, LED lamps with suitable current control driver circuit ,suitable for surface/recessed mounting as per 1S:10322. LED Luminaries:-(1) 'A complete LED lighting unit consisting of a light source and driver together with parts of distribute light,to position and protect the light source,and to connect the light source to a branch circuit. The light source itself may be an LED array and LED module, or an LED lamp. (2):-Supplied LED luminaries shall confirm to IS:16101(2012) IS :16106(2012).Light Source(LED) in the Luminaries should be of make:- (1):-NICHIA/ CREE/OSRAM/ SEOUL/ PHILIPS/LUMILEDS /LEDNIUM. (2):-LEDs to S:16105(2012).1S:16108(2012),IEC:62471.1.Input operating voltage :-105-295 V IAC.2:-Normal Voltage- 220V AC.3 Driver type: constant current driver with short circuit iprotection(For tube light).4.Control of distribution:-Full cut off.5.Drive component :Industrial grade only .6 Efficiency of driver electronic:>= 85% (For tube light).7.Colour temperature:5000- 6500K(For tube light).8.Colour rendering index(CRI):>75(For tube light).9.Ingress protection :IP-20.10.Lumen output: >=100 lumens/[email protected] drive current(For tubelight).11.Power factor:->0.90(For tube light). 12.Total harmonics distrotion(THD):-<20%(For itube light).13.Lamp cover :Acrylic cover which does not result in loss of lumens. 14.Finishing:Power coated /Anodized.15.Secondry optics:poly corbonate reflector/ poly carbonate lens.16.Construction of housing: extruded aluminum / CRCA / Pressure die cast aluminum.17.Mounting :Suitable for surface mounting/recessed mounting.18.Certificate:Firm to submit LM80(In respect of LED used)& LM79(Inrespect of luminare used) test certificate from National/International accredited Laboratory and OEM certificate for complience of BIS/IEC.19.Warranty:Firm to submitiwarranty certificate for five year along with the supply.All fittings should be embossed/sticker withimanufacturing date and warranty details at time of supply.20.The weight of fixture should be standard for better heat resistance of LED PCB. All fittings shall be fitted as surfaceimounting/recessed mounting with twisted twin flexible cord of minimum size 16/0.2 mm copper conductor as per relevant technical specification. Material prameters must remain unchanged during entire warranty priod. Inspection by- RITES." | — | — | — | 3,42,747.08 | |
| — | 132.00 | — | — | ||
| "Supply, replacement, fixing, testing, connecting and commissioning of 45 Watt or above LED inverter street lights fittings with PDC housing, IP 66 and inbuilt battery backup with auto ON/OFF and dimming option(Dimming 50% on battery backup) and backup of upto 3 to 4 hrs. LED Luminaries:-(1) A complete LED lighting unit consisting of a light source and driver together with parts of distribute lights,to position and protect the light source,and to connect the light source to a branch circuit.The light source itself may be an LED array and LED module, oan LED lamp. (2):- Supplied LED luminaries shall confirm toIS: IS:16101(2012) IS :16106(2012).Light Source(LED) in the Luminaries should be of make:- (1):-NICHIA/ CREE/OSRAM/ SEOUL/PHILIPS/LUMILEDS /LEDNIUM. (2):- LEDs to 1S:16105(2012)1S:10322.1S:16108(2012),1S:10322,IEC:6247T1yp.e LED:- High power LED,SMD(Surface Mounting device).1.Input operating voltage :-105-295 V AC.2:- Normal Voltage- 220V AC,3.Driver type: constant current driver with short circuit protection. 4 LED life:- >50000 burning hours .5.Depreciation:- 30% max.after 50000 burning hours.6.Control of distribution:-Full cut off. 7.Surge protection:4KV (internal)+10KV(External Surge protection device).8.Drive component :Industrial grade only.9.Efficiency of driver electronic: > 5%.10.Beam angle:>=140 degree along with road and &>=80 degree across the road.11.Colour temperature:5000-6500K.12.Colour rendering index(CRI):>=75.13.Ingress protection :IP-66.14.Lumen output: >120 lumens/watt.15.Power factor:>;0.95. 16.Total hormonics distrotion(THD):-&It;15%.17.Lamp cover :Toughened glass or UV stabilsed poly carbonate. 18.Finishing:Power coated /Anodized.19.Secondry optics:poly corbonate reflector/ poly carbonates lens.20.Construction of housing: extruded aluminum/CRCA/Pressure die cast aluminum.21.Mounting:Suitable for existing pole/Truss/Lantern mounted.22.Certificate:Firm to submit LM80(In respect of LED used)& LM79(In respect of luminare used) test certificate from National/International accredited Laboratory and OEM certificate for compliance of IBIS/IEC.23.Warranty:Firm to submit warranty certificate for five year along with the supply. All fittings should be embossed/sticker with manufacturing date and warranty details at time of supply.20.The weight of fixture should be standard for better heat resistance of LED PCB.ALll fittings shall be fitted with new suitable bend/elbow with clamp and proper nut and bolt and connection with itwisted twin flexible cord of minimum size 16/1 mm copper conductor as per relevant technical specification. Materials prameters must remain unchanged during entire warranty period.Inspection by-RITES" | — | — | — | 9,20,772.6 | |
| — | 452.00 | — | — | ||
| Concealed Wiring of main from main distribution board to sub board in heavy gauge PVC conduit Pipe as per IS : 9537 with PVC multistrand copper conductor of size 2 x 2.5 sqmm in voltage grade 1100 volt as per IS: 694 with ECC of 1/18 SWG copper wire, make of wire : Finolex, Plaza, Polycab,Havells. | — | — | — | 20,443.96 | |
| — | 256.00 | — | — | ||
| Concealed wiring of main from main distribution board to sub board in heavy guage PVC conduit pipe as per IS:9537 with PVC multistrand copper conductor of size 2 x 4 sqmm in voltage grade 1100 volt as per IS:694 with ECC of 1/18 SWG copper wire, make of wire: Finolex, Plaza , Polycab,Havells. | — | — | — | 15,961.6 | |
| — | 127.00 | — | — | ||
| Supply, fixing, connection, testing and commissioning of LED fitting indoor type , Lumen efficiency 100 lumen/watt ,output system wattage 42W (+10%, 5%) with IP 65 or better protection water proof surface/suspendedmounting suitable for operation on 140VA 270V AC supply, LED used in fittings should be of make : NICHIA/OSRAM/SEOUL/CREE/PHILIPS LIMITEDS/LEDNIUM with warranty period of 5 yrs from date of commissioning or 6 yrs from date of supply whichever is earlier complete with testing arrangement. Make : Bajaj, Philips, Havells. | — | — | — | 6,55,561.3 | |
| — | 457.00 | — | — | ||
| — | 10.00 | — | — | ||
| — | 455.00 | — | — | ||
| — | 67.00 | — | — | ||
| — | 23.00 | — | — | ||
| — | 4.00 | — | — | ||
| — | 12.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
NewTenderDument2025.pdf
ATTACHMENT
GCC2022UPDATED.pdf
ATTACHMENT
ANNEXURE-VIB.pdf
ATTACHMENT
AnnexureVupdated.pdf
ATTACHMENT
Annexure-VA1.pdf
ATTACHMENT
CSS.GUIDLINE_1.pdf
ATTACHMENT
mandateform.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .