Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹2.7 LAccepted-Finance | ₹2.7 L | L-1 | Accepted-Finance Lowest-1 |
| 2 | L-2₹3.0 L+₹25,986.28 (9.52%)Rejected-Finance A R AND M O ON VARIOUS ROAD IN SECTION NALAGARH 1 UNDER NALAGARH SUB DIVISION SH HIRING OF JCB | ₹3.0 L+₹25,986.28 (9.52%) | L-2 | Rejected-Finance Lowest-2 |
| 3 | L-3₹3.0 L+₹30,220.37 (11.1%)Rejected-Finance | ₹3.0 L+₹30,220.37 (11.1%) | L-3 | Rejected-Finance Lowest-3 |
| 4 | L-4₹3.3 L+₹54,238.40 (19.9%)Rejected-Finance | ₹3.3 L+₹54,238.40 (19.9%) | L-4 | Rejected-Finance Lowest-4 |
| Sl No | Description | Qty | Unit | tej ram construction company L3 | Manoj kumar L2 | DALEEP KUMAR L4 | Chaman L1 |
|---|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation, trenches (for pipes & pits) up to all depths in all classification of earth work such as pick work, jumper work, saturated soil including blasting soft/hard rock or chiseling soft/hard rock where blasting is prohibited in all lifts including trimming & dressing of sides, levelling of beds to correct grade i/c shoring, strutting, planking, timbering wherever required, stacking the useable or unuseable material/ soil separately & after excavated soil clear from the edge of excavation returning the excavated soil after laying, jointing, testing of pipes in trenches in 15 Cm layers including consolidating of each deposited layer by ramming, watering & then disposing of all surplus excavated soil/unusable material as directed with in all leads & lifts including restoration of unmetalled surfaces to its original condition & including cost of diversion for traffic,night signals, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respect with in all leads & lifts as per the entire satisfaction & directions of Engineer- in- Charge. | 4.32 | Cum | 400 ₹1,728 | 370 ₹1,598.4 | 410 ₹1,771.2 | 300 ₹1,296 Lowest |
| 2.00Laying, Jointing, Testing and Carriage of GMS tubes (Medium Grade) in trenches including tube fitting such as bends, tees, air valves, unions and collars etc complete (Earth work to be measured and paid for separately) complete in all respect with in all leads & lifts as per the entire satisfaction & directions of Engineer- in- Charge. | |||||||
| 2.01 | 100 mm dia (M) | 16 | Rmt | 90 ₹1,440 | 160 ₹2,560 | 170 ₹2,720 | 75 ₹1,200 Lowest |
| 3.00Cutting of GI pipes, by welding confirming to IS 1239-1990 (Part-II) with Diesel Generator welding set at site of work according to site requirement according to relevant BIS standards/approved specifications including carriage of material complete in all respects with in all leads & lifts as per the entire satisfaction & directions of Engineer- in- Charge. | |||||||
| 3.01 | 100 mm | 577.76 | Cm | 4 ₹2,311.04 | 4.5 ₹2,599.92 | 2.7 ₹1,559.95 | 1.9 ₹1,097.74 Lowest |
| 3.02 | 65 mm | 176.59 | Cm | 4 ₹706.36 | 4.5 ₹794.66 | 2.7 ₹476.79 | 1.9 ₹335.52 Lowest |
| 3.03 | 50 mm | 151.47 | Cm | 4 ₹605.88 | 4.5 ₹681.62 | 2.7 ₹408.97 | 1.9 ₹287.79 Lowest |
| 3.04 | 40 mm | 245.17 | Cm | 4 ₹980.68 | 4.5 ₹1,103.27 | 2.7 ₹661.96 | 1.9 ₹465.82 Lowest |
| 4.00Welding of GI pipes, by butt welding confirming to IS 1239-1990 (Part-II) with Diesel Generator welding set at site of work according to site requirement in minimum three layer to make the joint leak proof according to relevant BIS standards/approved specifications including carriage of material and Die penetration test complete in all respects with in all leads & lifts as per the entire satisfaction & directions of Engineer- in- Charge. (This work also includes fabrication of short pieces i.e bends, tees and other specials etc). | |||||||
| 4.01 | 100 mm | 1,733.28 | Cm | 6 ₹10,399.68 | 6 ₹10,399.68 | 4.7 ₹8,146.42 | 3.9 ₹6,759.79 Lowest |
Tender Value
₹3.6 L
EMD Value
₹7,300
Closing Date
18 Dec 2025, 5:00 pmClosed
Executive Engineer
JSD Baggi
Providing Connectivity from Newly construted Storage tank 8 Nos Lot, Piplu Galu, Masin, Garh, Choundhar, Dharkei, 1st Stage Nandi, 2nd Stage Masin Various Location by Laying, Jointing, Testing and Carriage of Gl Pipe 100 mm dia 16 Rmt, Cutting, Weld
2025_HPIPH_123065_1
22202-22251 dated 09.12.2025
Open Tender
Civil Works
Item Rate
90 days
Baggi
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
₹7,300
22 Jul 2026
9 Dec 2025
19 Dec 2025
10 Dec 2025
18 Dec 2025
10 Dec 2025
10 Dec 2025 - 18 Dec 2025
Excavation in foundation, trenches (for pipes & pits) up to all depths in all classification of earth work such as pick work, jumper work, saturated soil including blasting soft/hard rock or chiseling soft/hard rock where blasting is prohibited in all lifts including trimming & dressing of sides, levelling of beds to correct grade i/c shoring, strutting, planking, timbering wherever required, stacking the useable or unuseable material/ soil separately & after excavated soil clear from the edge of excavation returning the excavated soil after laying, jointing, testing of pipes in trenches in 15 Cm layers including consolidating of each deposited layer by ramming, watering & then disposing of all surplus excavated soil/unusable material as directed with in all leads & lifts including restoration of unmetalled surfaces to its original condition & including cost of diversion for traffic,night signals, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respect with in all leads & lifts as per the entire satisfaction & directions of Engineer- in- Charge.
Laying, Jointing, Testing and Carriage of GMS tubes (Medium Grade) in trenches including tube fitting such as bends, tees, air valves, unions and collars etc complete (Earth work to be measured and paid for separately) complete in all respect with in all leads & lifts as per the entire satisfaction & directions of Engineer- in- Charge.
100 mm dia (M)
Cutting of GI pipes, by welding confirming to IS 1239-1990 (Part-II) with Diesel Generator welding set at site of work according to site requirement according to relevant BIS standards/approved specifications including carriage of material complete in all respects with in all leads & lifts as per the entire satisfaction & directions of Engineer- in- Charge.
Welding of GI pipes, by butt welding confirming to IS 1239-1990 (Part-II) with Diesel Generator welding set at site of work according to site requirement in minimum three layer to make the joint leak proof according to relevant BIS standards/approved specifications including carriage of material and Die penetration test complete in all respects with in all leads & lifts as per the entire satisfaction & directions of Engineer- in- Charge. (This work also includes fabrication of short pieces i.e bends, tees and other specials etc).
Providing, supplying and fixing of Cast Iron Sluice Valve of following dia of Kirloskar/ Kartar/ Pelican/ Leader make as per IS 14846/2000 of nominal pressure and designation PN-1.0 with cap complete process of opening of existing valve and fixing new valve including carriage of material complete in all respect with in all leads & lifts as per the entire satisfaction of the Engineer-in-Charge.
100 mm dia
Providing and fixing of Brass Ball Valve (UNIK make) (Heavy Duty) ISI marked of following diameter mentioned below complete in all respect with in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.
Providing and Fixing of GI Nipple (UNIK Make) (Heavy Duty) ISI marked as per IS: 1879:2010 (Third revision) (Malleable Cast Iron Pipe Fittings) with latest ammendment of following diameter mentioned below complete in all respect with in all leads and fits and to the entire satisfaction of the Engineer-in-Charge.
Providing and Fixing of GI Union (UNIK Make) (Heavy Duty) ISI marked as per IS: 1879:2010 (Third revision) (Malleable Cast Iron Pipe Fittings) with latest ammendment of following diameter mentioned below complete in all respect with in all leads and fits and to the entire satisfaction of the Engineer-in-Charge.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.46 MB
FORM6.pdf
Tender Documents • 0.42 MB
TC.pdf
Tender Documents • 0.05 MB
BOQ_180726.xls
BOQ • 2.12 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .