SPECIAL REPAIRS TO BLDG NOP 467 AT INF LINES AT JAMNAGAR

Amount

Taking down Chowkats or frames not exc. 1.5 sq. m but with shutters (without taking off shutters from the frames) each

Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq. m but with shutters (without taking off shutters from the frame) each double pannel door

Taking down Chowkats or frames not exc. 1.5 sq. m but with shutters (without taking off shutters from the frames) each & Refixing in same opening.( Windows)

Taking down shutters of any description ( Cupboard) area not exc 1 sm each

S&F Pressed steel frames of size of frame 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

Providing, cement concrete (1:2:4) type B-2 Using 12.5mm graded stone aggergiate as in Pressed steel door frame filling.

S&F factory made 35mm thick 2nd class hard wood plain framed, shutter(two panel) factory made with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003

S&F 35mm thifk Glazed and skeleton shutters, divided into squares, with plain, chamfered or rounded, mitred and rebated with sash bars, any numbers open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S&F 25mm thick prelaminated veenered particle board,interior grade solid core,general purpose type with face veenered of type 'BB' with 25mm thick as in cup board shutters and shelves etc, fixing timber frme work.

S&F Iind class Hard Wood beadding ,25mm wide,6mm thick lipping on veenered particle as in cup board shutter and shelves.

Dismentling of floor hearth or wall tiling including cement mortor bedding (but not bedding) and rubbish off the premisesof any description including cement mortar

M&L 25mm thick PCC (1:2:4) type B-1 (Using 20mm graded stone aggergiste) as in levellling course.

S&F glazed ceramic tiles (450 x 300) x 6 to 7 mm thick of any colour on verticle surfaces as in skirting/dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade including 10mm thick plaster in CM 1:4 .

M&L Joint free Non-skid Ceramic tiles 7 to 8 mm thick any colour (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match he shade, over 15mm thick screed bed in CM(1:6) etc complete as directed & specified.

Dismantling of stone slab and tile of any discreption or thickness on floor etc laid bedded and pointed in any morter

M&L Machine cut kota stone slab 20-25 mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to mach the shad of the slab including rubbing and mirror polishing complete, including 20 mm thick screed bed in cement mortat 1:6., providing marble strip boarder on floor (Marble measured and paid speratly) complete all as specified and directed.

M & L 20 mm thick Marble tile (Makrana white) in borders of kkota stone machine cut, beded jointed and pointed with white cement slury including cutting polishing etc. including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L 20mm thick Granite(of any type) work (table rubbed and polished) in cooking platforms and like laid over 15mm thick bedding in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, one piece mirror polished

M&L 20mm thick Granite(of any type) work (table rubbed and polished) in,window cills and like laid over 10mm thick bedding in cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, one piece mirror polished in all round opening of window/doors edges shall be bevelled,and at corner joint shall be cut mitred as directed by Eng...in ... Charge.

M&L 20-25mm thick kota stone skiritting 100mm high ,fixed in neat cement slurry over 10mm thick backing coat in CM (1:4) including cutting mirror polishing

M & L for Kota stone slab 18-20 mm thick in Riser and Treads of steps and narrow width n exc 30 cm in height or width,skirting, dado and pillar laid over 15mm thick cement screed screed bed in CM (1 :4) and jointed complete all as specified and directed.mirror polished.

S&F PVC chowakats/ Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F PVC Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

M&L for Powder coated aluminium anodised sliding window on 3 tire frame of section 92mm X 31.75 mm X 1.05 mm or appropriate equivalent section and shutters of section 18 mm X 44 mmX 1.35 mm or appropriate equivalent section fixed with 4 mm thick tinted sheet glass and SS wiremesh 0.36mm nominal dia of wire of aperture 1.4mm with rubber gasket, handles, locking arrangement etc complete all as specified and directed by the Engr-in-Charge. Make Jindal/Hindalco/ indal

M&L for powder coated aluminium anodised louvered type ventilator of frame of section 63.5mm X 38.1mm X 1.01 mm or appropriate equivalent section with 4 mm thick figured sheet glass with rubber gasket, handles, locking arrangement etc complete all as specified and directed by the Engr-in-Charge.Make Jindal/Hindalco/Indal

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 300 mm long.

S&F Aluminium alloy handles, fabricated type, anodised 150mm long

S&F Floor door stopper 150mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring.

S&F 100mm long mild steel butt hinges medium weight cold rolled

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed 200mm long

S&F 100 mm aluminium anodised, barrel tower bolts of extruded section.

S&F Ordinary rat tail rod pattern springs , incl roller and roller plate complete,300mm long in repairs

M&L 150mm long Hasp and staple, safety type, aluminum with mild steel hinge pin including bolt to hinge plate and fixed with screws

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps 30mm

S& F 20mm dia Stainless steel curtain rails,cut inrequired length and size to fit with opening including fixing brackets with necessary arrangement complete all as specified. Make Vista levolor/Mac décor/sophia

S & F only curtain rod brackes of Stainless steel,angular or cantiliver type fixed to wall with 02 nos screws on eah bracket and fitte screw for fixing curtain rod incl CP/stainless steel carved decorative design plin metal colour nobs with filling arrangements for curtain rod using screw complete decorative bracket for 20mm dia curtain rod all as specified.Make Vista levolor/Mac décor/sophia

S&F in repair Vitreous China urinals, half stall urinal (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

Demolition of concrete of any description & in any position not otherwise specifically provided and removing debris outside MD Land complete all as specified and directed.

M&L Average 50 mm thk Cement concrete type B1 , 1:2:4 (20 mm graded aggregate) as in levelling course/padding with slope 1:40 all as directed

M&L for Rendering 10 mm thick in CM (1:3) on padding course, with WPC @ 3% by wt of cement all as directed. Note :- WPC shall be measureded and paid seperately supply only.

Taking down all existing roof treatment and demolition of cement concrete padding/levelling course incl wire brushing and cleaning loose dust etc from surfaces of RCC roof incl flashing and juntion of parapet complete all as specified.

Roughening surfaces of old concrete surfaces by picking, sweeping clean and washing down with water to remove dust, etc incl brushing neat cement slurry with 3.0 kg of cement per sq metre complete all as specified.

M&L cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified.

M&L 25mm thick PCC 1:2:4, type B0 (using 12.5mm size stone aggregate) as levelling course incl finished even and smooth using extra cement complete all as specified

M&L 15mm thick screed bed in cement plaster 1:4 on padding layer for roof treatment with WPC complete all as specified

Supply only Integral waterproofing compound

M&L for water proofing treatment to non-accessible roof slabs by applying a coat of approved bituminous primer (conforming to IS-3384) @ 0.3 ltr per sqm on finished concrete surface of roof and laying 3mm thick APP PL/MT membrane (starting at lowest point in slope roof) over hot blown bitumen 85/25 grade or equivalent used for DPC purpose, by using a LPG torch to fuse plastic membrane on bottom face of membrane and applying uniform pressure with a roller/wet cloth to ensure to remove entrapped air, if any, with overlap joints of 100mm in longitudinal direction and 150mm in tranverse direction complete incl finally applying two coats approved aluminium paint over membrane complete all as specified.

Removal of dimolished/rubbish obtained and laying at different location within a radious of 5 Km to be shifted to a place as shown at a avg distance of 3 Km, spread and levelled all as specified and directed. (Measurment will be loose stacked made at depositing place)

S&F Towel Rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minium weight 190 gms)

Taking up or down steel tubing and connections including cleaning for refixing or removal to store of 40 or 50mm dia.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store of 15 mm dia.

Taking down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store

S&F 40mm bore steel tubing and connnection medium grade including making good distrubed surfaces of wall, floor & roof completed as specified and directed.

S&F 15 mm bore steel water tubing and connection'medium grade' including making good disturbed surfraces of wall, floor roof complete all as specified and directed.

S&F 20 mm bore steel water tubing and connection'medium grade' including making good disturbed surfraces of wall, floor roof complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. 1000 ltr capacity

S&F 25 mm bore Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brassferrule and fixed in repairs

M&L 75 mm thick Cement concrete type B-1, 1:3:6 (using 20 mm graded aggregate) as in plinth protection finished even and smooth without using extra cement.

Taking down of cement plaster of any description on brick walls etc including raking out joints, hacking for key, scrubbing down with water etc.

M&L for rendering 5mm thick in CM 1:3 on ceiling to be finished even and smooth without using extra cement.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finishing the surface even and even smooth without using extra cement..

M&L for preparation and applying three coats of white wash on new plastered surface of celing.

M&L for preparation of old surfaces of celling and applying three coats of white wash..

M&L for preparation of new plastered surfaces by washing, rubbing down and stopping of distempered surfaces and applying two coat of oil bound distemper on wall over a coat of primer etc complete all as specified and directed.

M&L for preparation of old plastered surfaces by washing, rubbing down and stopping of distempered surfaces and applying two coat of oil emulation distemper on wall etc complete all as specified and directed.

M&L 15 mm thick rendering in in two layers 5mm thick inCM 1:4,over 10mm thick cement plaster in CM 1:6 on fair face of brick work/Stone or concrete surface to be finished even and smooth without using extra cemen Including WPC compound 3% by weight of cement.(Note :a) Intergial WPC Compound shall be used in sencond layer,b) Intergial WPC shall be paid seperately on supply only..

M&L for complete removal of existing treatment from plaster and unplastered surface of wall including cleaning with scrappers any number of coat and any width or girth the area of application should be cleaned throughly removal of all dirt dust and uneven element from the surface by washing and scrapping and all the unevenness in surface shoud be corrected by exterior wall care putty surface shoud be sand down with fine grade sand paper for smoothness and applying 02 coats of exterior weather coat weather coat of white or tinned shade as per manufacterer instruction complete all as directed and specified( Make - Berger ,Asian,dulux)

Preparation of new painted steel surface of any description over 10 cm width/girth and applying 2 coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete

All as per item No 71 But on old steel surfaces.

M&L preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

All as per item No 73 Butone coat of synthetic enamalled paint on old wooden surfaces as directed and specified.

S&F in repairs100mm dia Cast iron Send cast soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors

M&L in repairs 100mm dia CI ' Y ' Branch pieces with acess door, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches

M&L in repairs100mm dia CI Bends (any radius),with acess door diminishing pieces or tapers (larger bore measured

M&L in repairs 100mm dia CI Bends (any radius), diminishing pieces or tapers (larger bore measured

M&L in repairs 75mm dia Casat iron and sand cast soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors

M&L in repairs 100mm cast iron sanitary connections short connections pipe of length upto 300 mm

S&F in repairs 100mm dia Cast iron floor trap long ams with 75mm dia out let, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)

M&L in repairs 100mm dia CI ' T ' with acess door Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches

M&L in repairs 75mm dia CI ' T ' with acess door Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches

M&L in repairs 75mm dia CI Bends (any radius), diminishing pieces or tapers (larger bore measured

M&L in repairs75mm dia CI Bends (any radius),with acess door diminishing pieces or tapers (larger bore measured

M&L in repairs 75mm dia CI ' Y ' Branch pieces with acess door, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches

S&F Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union inn repairs

S&F in Repairs CP Pillar taps 15 mm dia, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe and fixed.

S&F 15mm dia stop valves cast copper alloy fancy type chromiumplated with long shank and cup (concled type) screwed down, high pressure with capstain head , screwed both ends, fixed as in repairs.

S&F 15mm Brass CP bib cock cast copper alloy fancy type with long shank capstain head serewed down high pressure pipe in repairs.

S&F in repairs Soap dish any type fixed to plugs with chromium plated brass screws.

S&F Vitreous china wash basin, white , flat back , size 550 x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets fixed in repairs

S&F vitreous china wash down water closet pan (pedeswtal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), fixed in repair

S&F Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging

S&F in repairsvitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including trap set in and including con crete.

S&F PVC valveless, syphonic action type, 10 ltrs capacity flushing cistern low level white with inlet, ball valve, float and handle including brackets and flush pipe.

S&F stainless steel sink, 1.0mm thick for kitchen or laboratory with plug wate pipe washers, including cantilever cast iron brackets, connecting union etc, overall size 495 x 420 with bowl size 410 x 330 x 160mm, fixed in repair

S&F PVC connections 15 mm size with PTMT nuts of length 600mm

S&F in repairs 40mm Stop valves,brass cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions.

S&F 32mm dia Waste coupling, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

S&F 40mm dia Waste coupling, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

S&F Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe

Dismantling RCC water tank 500 ltr capacity above ground level complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. 1000 ltr capacity including 20 mm ball valves, high pressure with polithene float and fly nut complete, scewed for iron pipe of brass ferrule and fixed complete all as specifed and directed.

Demolition of concrete of any description & in any position not otherwise specifically provided and removing debris outside MD Land complete all as specified and directed from sunken slab.

M&L Preparing of spalled RCC surfaces due to seepage (nexc 50mm deep) by exposing fully corroded steel in the repair area and remove all scales and corrosion deposits mechanically or ideally by grit blasting, clean the surfaces and remove loose concrete, any dust, oil paint, grease etc and pre-wet the surface with water and allow to dry slightly, apply approved zinc primer over the cleaned re-bars & allow to dry before repair and the substrate should be primed by applying one neat/clear coat of approved Epoxy bonding agent, finally apply Polymer Mortar of approved Make prepared as per manufacturer instructions (laid in 10 to 15mm thickness with bonding agent accompanied after each 15mm layer) to the prepared substrate by hand when primer becomes tacky ensuring that the material reached evenly behind bars incl curing the surfaces complete all as specified and directed.

Roughening surfaces of old concrete surfaces by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified.

M&L 5mm thick rendering in cement plaster 1:3 with WPC on bottom and side walls of sunken floor incl finished even and smooth w/o using extra cement all as specified.

M&L Cleaning vertical and horizontal surfaces of sunken slab using wire brushing followed by sanding with emery paper for loose materials/dust and applying two coats of epoxy resin component (Dr. Fixit DAMPGUARD or equivalent) solution/mix using nylon brush pouring Base part in appropriate container followed by the Hardner part and mix thoroughly to attain homogeneous smooth paste and dilute the mixed compound with water in ratio 1 part Base: 1 part Hardner: 1 part water by slow addition and mix thoroughly until a brushable consistency is obtained, first coat will be allowed to dry for 6 to 8 hrs before application of second/final coat) incl curing treated surface for 24 hrs complete incl applying evenly a coat of blown bitumen @ 1.5kg/sqm over entire treated surfaces incl spout holes complete and all as specified as per manufacturer instruction.

M&L filling PCC type D2 1:4:8 (40 mm graded stone aggr) as in sunken floor after applying appropriate treatment to side walls cmplete.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars, railings & similar work conforming to Fe-410-O or Fe-310-O

S&F Plain 0.71mm thick Aluminum sheeting alloy 31000 H4 in ridges,valley gutter drip and straight flashing (length and girth as fixed) over crumple section fixed with bright screws

Taking down carefully aluminum /copper point wiring (light, fan, switch & power) complete including fittings such as switches, ceiling rose, pendent, by unscrewing from board ,out let box, fitting and fixture such as bulk head fitting, sketch fittings and making good the disturbed rurfaces of walls floors etc all as directed.

M&L for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross sectional area, single core, pvc insulated and unsheathed FRLSH cable 1100 volts grade, ISI-694 marked with valid CML No in and including medium grade, PVC Concealed conduit of dia not less than 20mm and conduit accessories concealed in wall, ISI marked with valid CML No (IS-9537-1983 for conduits and IS: 3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes (with earth dolly) duly painted with two coats of anticorrosive paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3mm thick Hylam sheet cover for fixing of switches, sockets etc including PVC insulated multi stranded copper conductor 1.5 sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dully complete all as specified and directed at site for the following :

One light/ Fan point controlled by one way switch.

One 5 Amps socket on same board with other switches.

One 5 Amps switch socket combination on independent board.

All as per item No-3 here in above but 2.5 Sqmm stranded copper conductor and independent board for 15 Amps switch/ socket point as directed.

S&F switch piano flush type single pole one way 5 Amps 230 V.

S&F switch socket out let 3 pin 5 Amps flush type 230 Volts multipurpose,

All as per item No-119 above but 5 Amps and 15 Amps multipurpose( 3 Pin 15 Amps and one pin 5 Amps controlled by one switch.) .

S&F socket out let 3 pin, 5 Amps, 230 Volt multipurpose flush piano type. .

S&F in repairs fan regulator Electronic Step type (min 5 steps) 2module, 120W complete all as specified and directed by Engineer-in-Charge. Make :- Anchor/Havells/HPL

S&F ceiling rose surface backelet ISI marked 2 to 3 terminal all as specified.Make :- Anchor/Havells/HPL

S&F lamp holder insulated body with back plate for battern fittings.Make :- Anchor/Havells/HPL

Supply& Fixing LED batten fittings 4ft 20 Watt (Min 1900 lumens) with clamps incl PVC gutties and flexible wire and connecting to ceiling rose complete including 2.5 KV surge protector. Cat No D532040 Of Make Wipro or equvalent Bajaj/Havells/Jaguar/Philips

Supply& Fixing LED Retrofit lamp 7 Watt white 6500K cool day light Minimum lumens 600 in angle holder complete including 2.5 KV surge protector.Cat No n90001 Of Make Wipro or equvalent Bajaj/Havells/Jaguar/Philips

S&F DB sheet metal enclosure 8 way SPN for mounting MCB double door.HPL/havells/legrand/L&T

S&F Isolators DP 32 Amps all as specified and rupturing capacity 10 KA, HPL/havells/legrand/L&T

S&F in repair MCB single pole 5 to 32 Amps C series all as specified and rupturing capacity 10 KA, HPL/havells/legrand/L&T

M&L for sub main wiring with two runs of 4.00 Sqmm single core PVC unsheathed and insulated 1100 Volt grade/Multi stranded copper conductor drawn through PVC conduit and accessories fixed an concealed of walls, ceiling floors etc including one run of PVC insulated and unsheathed cable of copper conductor of 4.00 Sqmm single core as earth continuity wire all as specified and directed. Note :- Two runs of single core PVC insulated unshethed cables and one run of earth continuity conductor incl conduit will be messured and paid as one unit length only.

Taking down & Refixing Exhaust fan 225mm sweep AC, 240 volts,Metal body ,in same location after cleaning , greasing and painting with synthetic enamel paint by spreying including filling cavities with filler, one coat after cleaning all dusts etc and connecting up including provision of flexible wire from ceiling rose/connector to fan all as specified and directed by Engr in charge.

Taking down & Refixing Ceiling fan 1200mm sweep AC, 240 volts,Metal body ,after cleaning , greasing and painting with synthetic enamel paint by spreying including filling cavities with filler, one coat after cleaning all dusts etc and connecting up including provision of flexible wire from ceiling rose/connector to fan all as specified and directed by Engr in charge

M&L for earthing in repairs complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in grond earth pit not less than 2.25 mtrs deep below ground level with top edge of the plate not less than 1.50 mtr and below nomal ground level connected to galvanised earth lead wire 4.00mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electric plate No-5 conneced to earthing test point all as specified or indicated including testing on completion.

Supply, fixing, testing and commissioning 30W LED security light fitting with system output of 3000 lumens & with dedicated street light optics, System efficacy of greater than 100lm/W luminarie should have pressure die cast aluminium LM6 housing. Luminaire should have dedicated street light optics for better uniformity & spacing. Luminarie should have air vents in housing for proper thermal management. Min IP preventation should be IP65. System power consumption (including driver losser) should not exceed 20W .The driver is suitable for built in 5KV surge voltage, open/ shortcircuit protection external surge 10KV protection should be provided Cat No d923065Of Make Wipro or equvalent Bajaj/Havells/Jaguar/Philips

S& F security light bracket made out of GI pipe 40mm light grade ISI marked 1.5 Mtr long bend to shape as required for LED fittings at site including M S Clamp 2 Nos made out of flat iron 50 X 5mm with necessary nuts Bolts and two coats of alluminium paint over a coat of red oxide primer all as directed.

SIBS CONTRACTOR

Honest builders

nasreenenterprise

JAMNAGAR ELECTRIC AND MACHINERY CO