Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹15.9 CrAccepted-AOC 112 RADHEY SHYAM VIHAR PHASE II MURAD NAGAR GHAZIABAD UP | GHAZIABAD | UP | ₹15.9 Cr Quoted ₹19.8 Cr | 1 | Accepted-AOC L1 |
| 2 | 2₹20.1 CrRejected-AOC B 163 SWARN JAYANTI PURAM GHAZIABAD GHAZIABAD GHAZIABAD GHAZIABAD UTTAR PRADESH 201001 | GHAZIABAD | UTTAR PRADESH | 201001 | ₹20.1 Cr | 2 | Rejected-AOC L2 |
| 3 | 3₹21.2 CrRejected-AOC | ₹21.2 Cr | 3 | Rejected-AOC L3 |
Tender Value
₹13.6 Cr
EMD Value
₹40.8 L
Closing Date
18 May 2023, 4:00 pmClosed
EE(E and M -II) Lakhwar Proj
Lakhwar Bhawan-I, Dakpathar
1. Tender fee 2. Bid security 3. Rate validity 4.SITC of 12.5 MVA T/F and other switchgear material for 33/11 kV substation 5. OEM Authorization certificate required for Transformer and VCB
2023_UJVN_57514_1
01/EE(EM-II)/LP/2023-24
Open Tender
Electrical Works
204 days
Village-Kaldriyan
SITC of 40MVA SS in single order. unit t/f capacity not less than 8 MVA
2 documents required · 2 mandatory
₹29,500
GM (Civil) Lakhwar Project DKP
₹40.8 L
Yes
18 Sept 2023
26 Apr 2023
22 May 2023
26 Apr 2023
18 May 2023
6 May 2023
28 Apr 2023 - 2 May 2023
Supply part: Supply at the following material including transpiration, loading, unloading and proper stacking at site etc
33/11 KV, 12.5 MVA Transformer with OLTC
33KV, 1250Amp, 31.5 KA Circuit Breaker with GI support structure.
33 KV Fuse Set complete with post, Base channels, clamps complete in all respect.
36 KV, 1250A (3-Phase), 31.5 KA double break motorized isolator with E/S with Marshalling Boxes and all mounting accessories complete in all respect.
36 KV, 1250A (3-Phase), 31.5 KA double break motorized isolator without E/S, with Marshalling Boxes and all mounting accessories complete in all respect.
33 KV Surge Arrester with surge counter and insulating material, GI earth strip 50x6 mm for proper connection on earth pit.
33KV, 240 Sq mm XLPE, Single core Aluminum, Armoured FRLS cable
Copper control cable FRLS, armoured 2.5 sq mm 2 core
Copper control cable FRLS, armoured 2.5 sq mm 4 core,
Copper control cable FRLS, armoured 2.5 sq mm 6 core,
Copper control cable FRLS, armoured 2.5 sq mm8 core,
Copper control cable FRLS, armoured 2.5 sq mm 10 core
Copper cable FRLS, armoured 25 sq mm CU 4 CORE CABLE
Jointing kit for1x240 sq mm 33 KV XLPE Outdoor cable
110V, 300AH, Plante type battery with all consumables , with supply of battery stand and all testing equipment’s
110V, 50/50 A float with trikkle and Boost Battery Charger
36 KV, 1phase 33KV/110 V Three core outdoor type Potential Transformer with Marshalling Boxes
36 kV, 400 A,31.5 KA, 1 phase, Four Core Current Transformer with 120% extended current rating with Marshalling Boxes
36 kV, 400 A,31.5 KA, 1 phase, Three Core Current Transformer with 120% extended current rating with Marshalling Boxes
11/0.4 KV, 500 KVA, 3 phase in capsule resin cast dry type Transformer,
11 KV VCB (Incomer) 500 MVA, 800A,
11 KV VCB Feeder 500 MVA, 400A,
11 KV VCB Bus coupler 500 MVA, 800A,
11 kV single core XLPE,800 Sq mm, AL XLPE, FRLS , round armoring 4.5 oxygen index cable
11 kV three core XLPE,400 Sq mm, AL XLPE, FRLS , round armoring 4.5 oxygen index cable.
11 kV three core XLPE,300 Sq mm, AL XLPE, FRLS , round armoring 4.5 oxygen index cable.
11 kV three core XLPE, 240 Sq mm, AL XLPE, FRLS , round armoring 4.5 oxygen index cable.
Copper/BimetallicJointing kit for1x800 sq mm AL11 KV XLPE Indoor cable
Copper/BimetallicJointing kit for1x800 sq mm AL11 KV XLPE Outdoor cable
Copper/Bimetallic Jointing kit for3x400 sq mm AL 11 KV XLPE Indoor cable
Jointing kit for3x400 sq mm AL 11 KV XLPE Outdoor cable,
Copper/Bimetallic Jointing kit for3x300 sq mm AL 11 KV XLPE Indoor cable
Jointing kit for3x300 sq mm AL 11 KV XLPE Outdoor cable,
Copper/Bimetallic Jointing kit for3x240 sq mm AL 11 KV XLPE Indoor cable,
Copper/Bimetallic Jointing kit for3x240 sq mm AL 11 KV XLPE Outdoor cable,
ACSR Bus conductor Moose
Bay Conductor ACSR ZEBRA.
415 Volt, 1600 amp, LT Panel
415 V, 3 Phase+ Neutral 4 wire, copper sandwich bus duct, 1600A Current Rating, degree of protection IP65 complete in all respect as per scope of work & Technical Specification: Straight Length-40 meter, 90 Degree bend-provision Horizontal-06 Nos., 90 Degree bend-provision Verticle-12 Nos, Flange end provision-06 Nos., adopter box-06 No., copper braided flexible at termination end-04 Nos., Mono block joint assembly-04 sets, GI horizontal & vertical support for properly fastening and hanging the bus duct. The actual quantity may calculated after positioning of equipment’s and finalization of layout drawing.
33kV protection & relay panel for bus coupler & line
33kV relay &protection panel for incommer & transformer with PT and trunkling panel complete
Switchyard Hardware fitting (tension, suspension, PG clamp etc.) for Zebra to Zebra, Zebra to Moose, termination clamp for CT, PT , LA, Isolator & Breaker etc complete in all respect to complete the job
WORK PART :
Installation, Testing & Commissioning of 12.5 MVA Transformer with OLTC and construction oil drainage sump pit complete in all respect.
Installation, Testing & Commissioning of 33KV, 1250A,31.5 KA Circuit Breaker with support structure
Installation, Testing & Commissioning of 33 KV Fuse set, 1250 Amp with all required material such GI channel, clamps nut bolt and washers .
Installation, Testing & Commissioning 36 KV 1250Amp, 31.5KA (3-Phase) double break isolator with E/S including channel, clamps pipe etc complete in all respect.
Installation, Testing & Commissioning 36 KV 1250Amp, 31.5KA (3-Phase) double break isolator without E/S including channel, clamps pipe etc. complete in all respect.
Installation, Testing & Commissioning of 33 KV Surge Arrester & surge counter including proper earthing of LA’s by supply and fixing of insulating material and down conductor.
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 33 KV grade of size 240 Sq. mm. direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc.
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size UPTO 35 Sq. Mm. in the existing masonry open duct as required including supply and installation of GI cable tray (Bend reducer, cable tray etc) for power and control cable, complete in all respect for proper completion of work.
Installation, Testing & Commissioning of 110V, 300AH, Plante type battery
Installation, Testing & Commissioning of 110V, 50/50 A float cum Boost Battery Charger with all installation material
Installation, Testing & Commissioning of Jointing kit for1x240 sq mm 33 KV XLPE OUTDOOR cable
Installation, Testing & Commissioning 36 KV, 1phase 33KV/110 Volt single core outdoor type potential transformer with all materials for proper installation.
Installation, Testing & Commissioning of 36 kV, 400 A, 31.5 KA, 1 phase current transformer with 120% extended current rating with all materials for proper installation.
Installation, Testing & Commissioning of 11/0.4 KV, 500 KVA, 3 phase Transformer with all materials for proper installation.
Installation, Testing & Commissioning of 11 KV, VCB I/C panels, 500MVA, 800A, 110 Volt AC with bus riser for existing 11KV panels including fabrication and erection of base channel etc .
Installation, Testing & Commissioning of 11 KV VCB 500 MVA, 800 A,110 AC with bus riser for existing 11KV panels including fabrication and erection of base channel etc .
Installation, Testing & Commissioning of 11 KV VCB, BUS COUPLER 500 MVA,800A with bus riser for existing 11KV panels including fabrication and erection of base channel etc .
Laying of 11 kV single core XLPE,800 Sq mm, AL , FRLS , round armoring 4.5 oxygen index copper cable as per PWD/CPWD specification.
Installation, Testing & Commissioning of copper Jointing kit for1Cx800 sq mm AL 11 KV XLPE Indoor cable
Installation, Testing & Commissioning of Copper Jointing kit for1Cx800 sq mm AL 11 KV XLPE Outdoor cable
Installation, Testing & Commissioning of copper Jointing kit for 3Cx400 sq mm AL 11 KV XLPE Indoor cable
Installation, Testing & Commissioning of Jointing kit for 3Cx400sq mm AL 11 KV XLPE Outdoor cable including supply and fixing of GI cable tray
Installation, Testing & Commissioning of copper Jointing kit for 3Cx300 sq mm AL 11 KV XLPE Indoor cable
Installation, Testing & Commissioning of copper Jointing kit for 3Cx300 sq. mm. AL 11 KV XLPE outdoor cable
Installation, Testing & Commissioning of copper Jointing kit for 3Cx240 sq. mm. AL 11 KV XLPE Indoor cable
Installation, Testing & Commissioning of Jointing kit for 3Cx240 sq. mm. AL 11 KV XLPE Outdoor cable
Laying/stringing of moose conductor in Bus & Zebra conductor in bay including filling of all hardware fittings, erection of 120KN Disc insulator/post/pin insulator etc.
Installation, Testing & Commissioning of 415 V LT Panel
Installation, Testing & Commissioning of 415 V, 3 Phase+ Neutral 4 wire, copper sandwich bus duct, 1600A Current Rating, degree of protection IP65 complete in all respect as per scope of work & Technical Specification: Straight Length-40 meter, 90 Degree bend-provision Horizontal-06, 90 Degree bend-provision Verticle-06, Flange end provision-06, adopter box-06, copper braided flexible at termination end-04, Mono block joint assembly-04 sets, horizontal & vertical support.
Installation, Testing & Commissioning of 33kV protection panel for bus coupler & line
Installation, Testing & Commissioning of 33kV protection panel for transformer
Design, Supply and installation of SCADA system comprising with workstation having Modem, Analog/Digital, I/O, A/D convertor, Relays, Digital Signal processors/sensors/ isolators , all cable and accessories, 5KVA UPS , Table chairs etc. for operation and protection of all 33kv,11 kV control & relay panels, LT panels , all transformers ,DC systems with remote monitoring & operation of the substation, complete in all respect.
Construction of Cable Trench
Excavation in ordinary rock using manual means including loading in a truck and carrying of excavated material to embankment site with a lift up to 1.5 m and lead upto 50 m as per CPWD/PWD Technical Specification
Dismantling of Cement Concrete Pavement (Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters, stacking serviceable and unserviceable materials separately).
Plain/reinforced cement concrete in substructure complete as per drawings and technical specification (For height upto 5 m) Hand Mixed (1:2:4) as per CPWD/PWD Technical Specification
Providing concrete for plain/ reinforced concrete in open foundations complete as per CPWD/PWD Technical Specification Nominal mix 1:3:6.
Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per CPWD/PWD Technical Specification
Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in substructure complete as per approved drawings and as per CPWD/PWD Technical Specification
Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. Angle(65x65x6mm) & Angle(75x75x8mm) as per CPWD/PWD Technical Specification
Centering and shuttering including strutting, propping etc. and removal of form work for Columns, piers, abutments, pillars, posts and struts. As per CPWD/PWD Technical Specification
Supply, fabrication, erection & installation of supplied M.S Chequered plate 8 mm thick including all required T&P & labour for proper completion of work in all respect. Make TATA/Jindal/RINL/SAIL
Construction of Transformer Foundation & Drain system
Excavation in ordinary rock using manual means including loading in a truck and carrying of excavated material to embankment site with a lift upto 1.5 m and lead upto 50 m as per CPWD/PWD Technical Specification
Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings as per CPWD/PWD Technical Specification Nominal mix 1:3:6..
Plain/reinforced cement concrete in substructure complete as per approved drawings and as per CPWD/PWD Technical Specification (For height upto 5 m) Nominal mix (1:2:4)
Centering and shuttering including strutting, propping etc. and removal of shuttering form the Columns, piers, abutments, pillars, posts and struts, as per CPWD/PWD Technical Specification
Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification as per CPWD/PWD Technical Specification
Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc .
Supplying, fitting, and placing HYSD bar reinforcement in superstructure complete as per approved drawing and as per CPWD/PWD Technical Specification
Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters, stacking serviceable and unserviceable materials separately.
Construction of Buffel wall
Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters, stacking serviceable and unserviceable materials separately).
Providing concrete for plain/ reinforced concrete in open foundations complete as per approved drawings and as per CPWD/PWD Technical Specification Nominal mix 1:3:6..
Brick masonry work in cement mortar in substructure complete excepting pointing and plastering, as per CPWD/PWD Technical Specification in 1:3 cement mortar.
Brick masonry work in cement mortar 1:3 in parapet excluding pointing and plastering as per CPWD/PWD Technical Specification (for superstructure)
Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure, as per CPWD/PWD Technical Specification
Construction of foundation for E&M Equipment in switchyard
Supply & complete fabrication of MS Structure make TATA/Sail/Jindal/RINAL with two coat of Primer and two coat of synthetic enamel paint
Supply & complete fabrication of hot dip galvanized G.I. structure . Make: Elektrolite, Jaipur/ EMCO formerly Urja),(Vadodara/ Goodluck Fabricators, Ghaziabad/ Kaytx Industries Pvt. Ltd., MandiGobindgarh, Punjab/ NEXO Structures, Ludhiana
Excavation in ordinary rock using manual means including loading in a truck and carrying of excavated material to embankment site with a lift upto 1.5 m and lead upto 50 m as per CPWD/PWD Specification for E&M Equipments in switchyard.
Providing concrete for plain/ reinforced concrete in open foundations complete as per CPWD/PWD Specification Nominal mix 1:3:6.
Plain/reinforced cement concrete in substructure complete as per CPWD/PWD Specification (For height upto 5 m) Nominal mix (1:2:4)
Supplying, fitting, and placing HYSD bar reinforcement in superstructure complete as per CPWD/PWD Specification
Capital Electech Pvt Ltd
Mishrilal Associates Pvt. Ltd.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid