REPAIR TO SWTs/SUMP AT ARMY AREA BANAR UNDER GE BANAR

Amount

Taking down cement plaster in any description from concrete/stone surfaces including scrubing down with water etc and its removal from site etc complete all as specified.

M&L for 10mm thick rendering on concrete surface and stone masonary surface, in cement mortar 1:3 mixing with liquid water proofing compound not less than 200ml/50KG of cement complete all as specified. (Note : Liquid water proofing compound shall be measured and paid separately under supply only)

Supply only liquid water proofing compound.

M&L for preparation of newly plastered or unplastered surfaces of wall and applying three coats of white wash etc complete all as specified.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint in camouflage pattern over one coat of chalk whitening etc complete all as specified.

M&L for preparation of old plastered or unplastered surfaces of wall and applying three coat of white wash etc complete all as specified.

M&L for preparation of old plastered surfaces with complete removal of existing treatment and applying two coats of cement base paint in camouflage pattern etc complete all as specified.

Demolition of cement concrete un-reinforced in flooring, paving not exc 15 cm thickness (below or above ground level) complete all as specified.

M&L for 50mm thick, PCC 1:3:6 type C-2 (Using 40 mm graded stone aggregate) as in plinth protection, concrete shall be laid in alternate bays not exceeding 3.00 m in length, finished even and smooth without using extra cement complete all as specified.

Demolition of cement concrete in reinforced (reinforcement cut as required to facilitate demoltion) and in any position not otherwise specifically provided for complete all as specified.

M&L for framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders, framed balusters; walkways, railings; framework for water tanks and similar work conforming to Fe-290. Gde 165 complete all as specified.

M&L for applying two coat of black bituminous paint over new steel surfaces of any description exceeding 10cm in width or girth complete all as specified.

M&L for cleaning of semi UG Sump/SWTs upto 225KL capacity at Banar Military area by pumping out the accumulated water at the bottom using portable pump, removing the complete silt using either suction pump or manually, cleaning the walls, floor and removing all the mud , dirt, algea, fungus and layers of calcinations, cleaning to remove the dislodged waste, spraying anti bacterial agent sanitizers to wall and floor of tank to make it sterile tank then filled crack if any with suitable chemical compound of STP/FOSRACK/SIKAGARD/BASF complete all as specified.

M&L for 15mm thick rendering on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing in CM 1:4 complete all as specified.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint, white or tinted over one coat of chalk whitening complete all as specified.

M&L for preparation of old painted wooden surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified.

M&L for preparation of old painted steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified.

M&L for running welding in repairs, thickness of metal to be welded not exc 6 mm thick complete all as specified.

Dismantling of floor, hearth or wall tiles including cement mortar bedding but not backing and removal of debris/rubbish off the premises complete all as specified.

M&L machine cut Kota stone 20-25 mm thick in riser of steps, skirtin dado and pillar laid over and including 10 mm thick plaster in CM (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (mirror face) complete all as specified.

M&L machine cut Kota stone 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (mirror face) as in flooring/treads of steps over and including 20 mm thick screed bed in CM 1:6 complete all as specified.

Material and labour for 75 mm thick PCC (1:4:8) type D2 using 40mm graded aggregate as in subbase complete all as specified.

Material and labour for chequered cement concrete tiles 30cmx30cmx25mm thick with grey cement and pigment, set jointed and pointed in neat cement slurry in floors over and including 15mmm thick screed bed in CM 1:6 complete all as specified.

M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified.

M&L 60mm thick Machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 (M-35 Grade) with grey cement and pigment complete all as specified.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

M&L for pre-cast concrete block as in Kerb Stone (Machine made) with solid blocks Type B1, 1:2:4 (20mm graded stone aggregate) exc 10 cm in width and setting in cement mortar 1:6 complete all as specified.

Dismantling of posts or struts (wood, steel or RCC) any section, including taking out embedded portion in concrete and making good distrubed ground complete all as specified.

Excavating in post holes (or similar holes) each n.exc 0.50 Cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil complete all as specified.

M&L for PCC (1:3:6) type C2 by using 40 mm well graded stone aggregate as in foundation, filling and mass concrete complete all as specified.

M&L for rolled steel section as in posts, struts and staples in fencing including cutting to top to shape (swan neck) as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary bolting or riveting welding etc and similar work confirming to Fe-290 Gde-165 complete all as specified.

M&L for two coats of synthetic enamalled paint over one coat of red oxide primer on new steel surfaces exc 10cm width or girth, including preparation of the surface complete all as specified.

Dismantling of fencing wire mesh any type and size complete all as specified.

Supply only Chain link MS galvanised fencing, any size or type, weight not less than 2.80 Kg/Sqm complete all as specified and directed.

Fixing only chain link fencing including line wires/ MS round bar (Any numbers), any mesh, size and type to any type of standards rails, straining bolts, etc including provision of binding wire (Note. Supply of flat iron, MS round bar & chain link shall be measured and paid seperately under supply only)

Supply only MS rounded bars Fe-290 (Gde-165) 10 mm dia and over cut to length and bend to shape as required as in tie bars, secured with nut, bolt and washers complete all as specified.

S&F 12 mm dia MS screw bolts any size (machine made) with hexagonal or square heads at one end and screwed the other ends, fitted with washer and one hexagonal nut exc 5cm long but n exc 10cm and dia of nec in 11 to 15mm complete all as specified.

Supply & laying of aggregate (broken/stone boulders) for loose filling, of gauge 40mm to 80mm graded complete all as specified.

M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Grade Fe-290 (Gde E-165) complete all as specified.

M&L for Expanded metal mesh, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members, weight of the mesh n exc 4 kg/sqm complete all as specified.

Demolition of cement concrete reinforced in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified.

M&L for RCC cement concrete Type B1, 1:2:4 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed

Use & waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping) flat and rough finished surfaces of concrete complete all as specified.

Bhawani Enterprises

D DEV COMPANY